SEARCH · Search NASA

Results for “Critical zone”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS2000

Diffusion Driven Combustion Waves in Porous Media

Filtration of gas containing oxidizer, to the reaction zone in a porous medium, due, e.g., to a buoyancy force or to an external pressure gradient, leads to the propagation of Filtration combustion (FC) waves. The exothermic reaction occurs between the fuel component of the solid matrix and the oxidizer. In this paper, we analyze the ability of a reaction wave to propagate in a porous medium without the aid of filtration. We find that one possible mechanism of propagation is that the wave is driven by diffusion of oxidizer from the environment. The solution of the combustion problem describing diffusion driven waves is similar to the solution of the Stefan problem describing the propagation of phase transition waves, in that the temperature on the interface between the burned and unburned regions is constant, the combustion wave is described by a similarity solution which is a function of the similarity variable x/square root of(t) and the wave velocity decays as 1/square root of(t). The difference between the two problems is that in the combustion problem the temperature is not prescribed, but rather, is determined as part of the solution. We will show that the length of samples in which such self-sustained combustion waves can occur, must exceed a critical value which strongly depends on the combustion temperature T(sub b). Smaller values of T(sub b) require longer sample lengths for diffusion driven combustion waves to exist. Because of their relatively small velocity, diffusion driven waves are considered to be relevant for the case of low heat losses, which occur for large diameter samples or in microgravity conditions, Another possible mechanism of porous medium combustion describes waves which propagate by consuming the oxidizer initially stored in the pores of the sample. This occurs for abnormally high pressure and gas density. In this case, uniformly propagating planar waves, which are kinetically controlled, can propagate, Diffusion of oxidizer decreases the wave velocity. In addition to the reaction and diffusion layers, the uniformly propagating wave structure includes a layer with a pressure gradient, where the gas motion is induced by the production or consumption of the gas in the reaction as well as by thermal expansion of the gas. The width of this zone determines the scale of the combustion wave in the porous medium.

Aldushin, A. P.↗

NASA NTRS1986

Two-phase flows and heat transfer within systems with ambient pressure above the thermodynamic critical pressure

In systems where the design inlet and outlet pressures P sub amb are maintained above the thermodynamic critical pressure P sub c, it is often assumed that heat and mass transfer are governed by single-phase relations and that two-phase flows cannot occur. This simple rule of thumb is adequate in many low-power designs but is inadequate for high-performance turbomachines, boilers, and other systems where two-phase regions can exist even though P sub amb P sub c. Heat and mass transfer and rotordynamic-fluid-mechanic restoring forces depend on momentum differences, and those for a two-phase zone can differ significantly from those for a single-phase zone. By using a laminar, variable-property bearing code and a rotating boiler code, pressure and temperature surfaces were determined that illustrate nesting of a two-phase region within a supercritical pressure region. The method of corresponding states is applied to bearings with reasonable rapport.

Hendricks, R. C.↗

NASA NTRS1986

Two-phase flows and heat transfer within systems with ambient pressure above the thermodynamic critical pressure

In systems where the design inlet and outlet pressure P sub amb are maintained above the thermodynamic critical pressure P sub c, it is often assumed that heat and mass transfer are governed by single-phase relations and that two-phase flows cannot occur. This simple rule of thumb is adequate in many low-power designs but is inadequate for high-performance turbomachines, boilers, and other systems where two-phase regions can exist even though P sub amb P sub c. Heat and mass transfer and rotordynamic-fluid-mechanic restoring forces depend on momentum differences, and those for a two-phase zone can differ significantly from those for a single-phase zone. By using a laminar, variable-property bearing code and a rotating boiler code, pressure and temperature surfaces were determined that illustrate nesting of a two-phase region within a supercritical pressure region. The method of corresponding states is applied to bearings with reasonable rapport.

Hendricks, R. C.↗

NASA NTRS2013

Cleaning Study of Genesis Sample 60487

The Genesis mission collected solar wind and brought it back to Earth in order to provide precise knowledge of solar isotopic and elemental compositions. The ions in the solar wind were stopped in the collectors at depths on the order of 10 to a few hundred nanometers. This shallow implantation layer is critical for scientific analysis of the composition of the solar wind and must be preserved throughout sample handling, cleaning, processing, distribution, preparation and analysis. Particles of Genesis wafers, brine from the Utah Testing Range and an organic film have deleterious effects on many of the high-resolution instruments that have been developed to analyze the implanted solar wind. We have conducted a correlative microscopic study of the efficacy of cleaning Genesis samples with megasonically activated ultrapure water and UV/ozone cleaning. Sample 60487, the study sample, is a piece of float-zone silicon from the B/C array approximately 4.995mm x 4.145 mm in size

Kuhlman, Kim R.↗

NASA NTRS2018

Multilayer Approach for Characterization of Bacterial Diversity in a Marginal Sea: From Surface to Seabed

Bacteria are the most important microorganisms in the world oceans, accounting for up to 75% of the total biomass. They are responsible for fundamental biogeochemical processes and therefore often used as ecological indicators. In this study, bacteria were quantified by flow cytometry and their diversity assessed by High Throughput Sequencing (HTS) in the southern Adriatic Sea. The most abundant bacterial groups were also quantified by qPCR. The samples were collected from the surface to the seabed over a total of 16 different depths at four stations during the late winter BIOTA (BIO-Tracing Adriatic water masses) cruise conducted in March 2016. The investigated area showed unusual water mass properties and was characterized by a shallow mixed layer, which differed from the usual winter convection conditions, typical of middle-altitude ecosystems and important for the seasonal picoplankton dynamics of this area. Heterotrophic bacteria were separated into HNA (relative High Nucleic Acid content) and LNA (Low Nucleic Acid content) subpopulations with abundances up to 1.8×10(exp 5) and 8.8×10(exp 5) cells/mL, respectively. HNA dominated at offshore stations reaching their maximum at depths below the euphotic zone. The bacterial community was dominated by Alphaproteobacteria, accounting for greater than 40% of the total sequence reads and were mainly represented by the SAR11 clade (90.84%), followed by Marinimicrobia (18% of the total sequence reads), mainly represented by clade SAR406 (8.44%). Distinctive bacterial groups were found in the euphotic layer (Bacteroidetes and Actinobacteria) and aphotic layer samples (Deltaproteobacteria, Marinimicrobia, Chloroflexi, Acidobacteria and Planctomycetes). Results of the qPCR analyses further confirmed HTS results with highest abundances obtained for Alphaproteobacteria, followed by Gammaproteobacteria and Bacteroidetes. The adopted multiple approach, combining different molecular tools, critically supported by optics and flow cytometry, reveal changes in the bacterial assemblages during the unusual thermohaline conditions observed in 2016 in the southern Adriatic Sea.

Southern Adriatic Sea↗

NASA NTRS2022

Instantaneous Photosynthetically Available Radiation (IPAR) prediction models based on Neural Network for ocean waters.

Instantaneous photosynthetically available radiation (IPAR) at the ocean surface and its vertical profile below the surface play a critical role in models to calculate net primary productivity of marine phytoplankton. In this work, we report two IPAR prediction models based on neural network (NN) approach, one for open ocean and the other for coastal waters. These models are trained, validated, and tested using a large volume of synthetic datasets for open ocean and coastal waters simulated by a radiative transfer model. Our NN models are designed to predict IPAR under a large range of atmospheric and oceanic conditions. The NN models can compute subsurface IPAR profile very accurately up to euphotic zone depth. The root mean square errors associated with the diffuse attenuation coefficient of IPAR are less than 0.011 𝑚−1 and 0.036 𝑚−1 for open ocean and coastal waters respectively. The performance of the NN models is better than presently available semi analytical models, with significant superiority in coastal waters.

PACE↗

NASA NTRS1988

Climatology of the stratospheric polar vortex and planetary wave breaking

The distribution of Ertel's potential vorticity (PV) on the 850 K isentropic surface is used to establish a climatology for the transient evolution of the planetary scale circulation in the Northern Hemisphere winter midstratosphere. PV distributions are computed from gridded NMC daily temperature and height maps for the 10 and 30 mb levels, and show that a very good approximation for 850 K PV can be derived from 10 mb heights and temperatures alone. It is assumed that reversals of the latitudinal gradient of PV, localized in longitude and latitude may be regarded as signatures of planetary wave breaking. Wave breaking identified by such signatures tends to occur mainly in the vicinity of the Aleutian anticyclone, with a secondary maximum over Europe. The area of the polar vortex, defined as the area enclosed by PV contours greater than a certain critical value, is strongly influenced by wave breaking. Erosion of the polar vortex due to transport and mixing of PV leads to a preconditioned state, when defined in terms of vortex area, that always occurs prior to major stratospheric warmings. During winters with little PV transport or mixing, the vortex area evolves rather uniformly in response to radiative forcing. During winters with major sudden warmings, the wave breaking signature as defined here first appears at low values of PV, then rapidly moves toward higher values as the vortex area is reduced and the 'surf-zone' structure becomes well defined.

Baldwin, Mark P.↗

NASA NTRSDate not supplied

Operational Analysis to Evaluate Practical Potential of Vertical Vertiplex for Urban Air Mobility

Urban Air Mobility (UAM) is intended to serve as an alternative mode of transportation to relieve congestions in and out of urban areas. Therefore, a high density vertiplex (HDV) with multiple touchdowns and liftoff (TLOF) zone is necessary to alleviate the demands. To increase the operational efficiency of the vertiplex, EVTOL aircraft are distributed to parking spaces to utilize the TLOF zone for another approach and departure procedure. The surface footprint of the infrastructure increases drastically due to the horizontal arrangement of taxiways and parking spaces. Because high-demand locations will likely be in an urban environment with space constraints, consideration to decrease the surface footprint of the infrastructure without jeopardizing the operational efficiency is necessary for the realization of UAM. The first part of this paper proposes an innovative approach to vertically orient taxiways and parking spaces by utilizing a vertical lift to transport EVTOL aircraft within the vertiplex while meeting the safety-critical requirements outlined in Heliport Design Advisory Circular: AC 150/5390-2c. The second part of the paper evaluates the practical potential of the proposed vertical vertiplex by analyzing relative surface area utilization and operational capacity.

Smart Air Mobility↗

NASA NTRS2001

Measurement of Microscopic Growth Rates in Float-Zone Silicon Crystals

Time dependent convective flows during crystal growth of doped semiconductors lead to fluctuations of the composition, so called dopant striations. In general, it is difficult to decide which is the main mechanism for the generation of these striations, it might be either the fluctuation of the concentration field in the melt and the extent of the solute boundary layer ahead of the solid-liquid interface or a variation of the growth velocity. Direct access to the concentration field is rather complicated to achieve, especially considering the high process temperature and the chemical activity of liquid silicon. The contribution of growth rate fluctuations to the formation of compositional fluctuations can be determined by measuring microscopic growth rates. The classical method of current pulses requires electrical feed-throughs and good electrical contacts, both are critical issues for the growth of high purity silicon crystals. Using a radiation based heating system, the heating power can be modulated very fast and effectively. We added to the normal heater power a sinusoidal off-set in the frequency range of 1 to 10 Hz, generating a narrow spaced weak rippling in the grown crystals which are superposed to the dopant striations caused by natural and by thermocapillary convection. The pulling speed was varied between 1 and 4mm/min. The microscope images of etched crystals slices have been analyzed by peak-search algorithms (measuring the spacing between each artificially induced marker) and by FFT. Performing growth experiments under a time-dependent flow regime, fluctuations of the microscopic growth velocity of Delta(v)/v(sub average) up to 50% have been measured. Damping the time-dependent convection by the use of an axial, static magnetic field of 500mT, the microscopic growth rate became constant within the resolution limit of this method. The results will be discussed using analytical methods for the calculation of microscopic growth velocity and by comparing them with measurements of temperature fluctuations in the melt during growth experiments itself.

Dold, P.↗

NASA NTRS2015

Lower Limits on Aperture Size for an ExoEarth Detecting Coronagraphic Mission

The yield of Earth-like planets will likely be a primary science metric for future space-based missions that will drive telescope aperture size. Maximizing the exoEarth candidate yield is therefore critical to minimizing the required aperture. Here we describe a method for exoEarth candidate yield maximization that simultaneously optimizes, for the first time, the targets chosen for observation, the number of visits to each target, the delay time between visits, and the exposure time of every observation. This code calculates both the detection time and multiwavelength spectral characterization time required for planets. We also refine the astrophysical assumptions used as inputs to these calculations, relying on published estimates of planetary occurrence rates as well as theoretical and observational constraints on terrestrial planet sizes and classical habitable zones. Given these astrophysical assumptions, optimistic telescope and instrument assumptions, and our new completeness code that produces the highest yields to date, we suggest lower limits on the aperture size required to detect and characterize a statistically motivated sample of exoEarths.

Earth-like planets↗

NASA NTRS2016

Passive Rocket Diffuser Theory: A Re-Examination of Minimum Second Throat Size

Second-throat diffusers serve to isolate rocket engines from the effects of ambient back pressure during testing without using active control systems. Among the most critical design parameters is the relative area of the diffuser throat to that of the nozzle throat. A smaller second throat is generally desirable because it decreases the stagnation-to-ambient pressure ratio the diffuser requires for nominal operation. There is a limit, however. Below a certain size, the second throat can cause pressure buildup within the diffuser and prevent it from reaching the start condition that protects the nozzle from side-load damage. This paper presents a method for improved estimation of the minimum second throat area which enables diffuser start. The new 3-zone model uses traditional quasi-one-dimensional compressible flow theory to approximate the structure of two distinct diffuser flow fields observed in Computational Fluid Dynamics (CFD) simulations and combines them to provide a less-conservative estimate of the second throat size limit. It is unique among second throat sizing methods in that it accounts for all major conical nozzle and second throat diffuser design parameters within its limits of application. The performance of the 3-zone method is compared to the historical normal shock and force balance methods, and verified against a large number of CFD simulations at specific heat ratios of 1.4 and 1.25. Validation is left as future work, and the model is currently intended to function only as a first-order design tool.

Jones, Daniel R.↗

NASA NTRSDate not supplied

Space Crop Production

As astronauts venture farther from Earth, and for longer periods, food will become increasingly critical. Crop production can supplement a packaged diet to provide additional nutrients and variety for astronauts. Testing with the Veggie and Advanced Plant Habitat chambers on the International Space Station is allowing us to understand the impacts of gravity and spaceflight on crop growth and nutritional content, and the importance of plants to astronauts living and working away from our home planet. The space environment presents unique challenges to crop production, and technology and knowledge gaps have been identified. Key gaps include how to: - Identify and demonstrate effective options to provide both water and oxygen to the root zone in microgravity - Understand the deep space radiation impacts on seeds and plants - Investigate the relationship between microbiomes and food safety - Store and handle seeds to ensure they are viable, free of contaminants and long-lived - Identify / develop potential crops suitable for the space environment - Understand automation and human factors - Determine scalability for different concepts and architectures Filling these gaps will help enable future human exploration and move us toward Earth-independence.

Space Crop Production↗

NASA NTRSDate not supplied

Space Crop Production

As astronauts venture farther from Earth, and for longer periods, food will become increasingly critical. Crop production can supplement a packaged diet to provide additional nutrients and variety for astronauts. Testing with the Veggie and Advanced Plant Habitat chambers on the International Space Station is allowing us to understand the impacts of gravity and spaceflight on crop growth and nutritional content, and the importance of plants to astronauts living and working away from our home planet. The space environment presents unique challenges to crop production, and technology and knowledge gaps have been identified. Key gaps include how to: • Identify and demonstrate effective options to provide both water and oxygen to the root zone in microgravity • Understand the deep space radiation impacts on seeds and plants • Investigate the relationship between microbiomes and food safety • Store and handle seeds to ensure they are viable, free of contaminants and long-lived • Identify / develop potential crops suitable for the space environment • Understand automation and human factors • Determine scalability for different concepts and architectures Filling these gaps will help enable future human exploration and move us toward Earth-independence.

Veggie↗

NASA NTRS2011

In Situ Observations and Sampling of Volcanic Emissions with Unmanned Aircraft: A NASA/UCR Case Study at Turrialba Volcano, Costa Rica

Burgeoning new technology in the design and development of robotic aircraft-unmanned aerial vehicles (UAVs)-presents unprecedented opportunities for the volcanology community to observe, measure, and sample eruption plumes and drifting volcanic clouds in situ. While manned aircraft can sample dilute parts of such emissions, demonstrated hazards to air breathing, and most particularly turbine, engines preclude penetration of the zones of highest ash concentrations. Such areas within plumes are often of highest interest with respect to boundary conditions of applicable mass-loading retrieval models, as well as Lagrangian, Eulerian, and hybrid transport models used by hazard responders to predict plume trajectories, particularly in the context of airborne hazards. Before the 2010 Ejyafyallajokull eruption in Iceland, ICAO zero-ash-tolerance rules were typically followed, particularly for relatively uncrowded Pacific Rim airspace, and over North and South America, where often diversion of aircraft around ash plumes and clouds was practical. The 2010 eruption in Iceland radically changed the paradigm, in that critical airspace over continental Europe and the United Kingdom were summarily shut by local civil aviation authorities and EURO CONTROL. A strong desire emerged for better real-time knowledge of ash cloud characteristics, particularly ash concentrations, and especially for validation of orbital multispectral imaging. UAV platforms appear to provide a viable adjunct, if not a primary source, of such in situ data for volcanic plumes and drifting volcanic clouds from explosive eruptions, with prompt and comprehensive application to aviation safety and to the basic science of volcanology. Current work is underway in Costa Rica at Turrialba volcano by the authors, with the goal of developing and testing new small, economical UAV platforms, with miniaturized instrument payloads, within a volcanic plume. We are underway with bi-monthly deployments of tethered SO2-sondes and are in the planning stages for the deployment of the SIERRA UAV to our site in March 2013. We will be conducting in situ observations simultaneously with ASTER orbital multispectral TIR data acquisitions, in order to compare in situ measurements with estimates of SO2 mass loading and dispersion derived from ASTER data. Though small UAVs are now being considered for use in active volcanic areas for in situ sampling of emissions (e.g., efforts by our group, and by our colleagues at the INGV in Italy and the Applied Science University in Dusseldorf, Germany, and others in the United Kingdom and Iceland), and also for remote sensing, much more needs to be done in the way of instrument development, and in developing small UAVs for both low altitude (tropospheric) and high altitude (stratospheric) applications. In particular, the development of all weather and day/night operational flight capabilities in close proximity to hazardous topography is crucial to a truly responsive volcano in situ measurement system. Finally, it is imperative that national civil aviation authorities recognize the unique benefits of such platforms. It is important that authorities understand that severely restricting or not deploying such tools in airspace over restless volcanoes or within eruption plumes, ostensibly because of the perceived (small) risk that such unmanned aircraft pose to manned air operations, itself poses a bigger transcendental risk to proximal populations and particularly to the aviation community, itself.

Volcanic Ash Advisory Centers (VAACs)↗

NASA NTRS2023

A JWST Transmission Spectrum of A Nearby Earth-Sized Exoplanet

The critical first step in the search for life on exoplanets over the next decade is to determine whether rocky planets transiting small M-dwarf stars possess atmospheres and, if so, what processes sculpt them over time. Because of its broad wavelength coverage and improved resolution compared with previous instruments, spectroscopy with the James Webb Space Telescope (JWST) offers a new capability to detect and characterize the atmospheres of Earth-sized, M-dwarf planets. Here we use the JWST to independently validate the discovery of LHS 475 b, a warm (586 K), 0.99 Earth-radius exoplanet, interior to the habitable zone, and report a precise 2.9–5.3 μm transmission spectrum using the Near Infrared Spectrograph G395H instrument. With two transit observations, we rule out primordial hydrogen-dominated and cloudless pure methane atmospheres. Thus far, the featureless transmission spectrum remains consistent with a planet that has a high-altitude cloud deck (similar to Venus), a tenuous atmosphere (similar to Mars) or no appreciable atmosphere at all (akin to Mercury). There are no signs of stellar contamination due to spots or faculae. Our observations show that the JWST has the requisite sensitivity to constrain the secondary atmospheres of terrestrial exoplanets with absorption features <50 ppm, and that our current atmospheric constraints speak to the nature of the planet itself, rather than instrumental limits.

JWST↗

NASA NTRS1974

Crack opening stretch in a plate of finite width

The problem of a uniaxially stressed plate of finite width containing a centrally located damage zone is considered. It is assumed that the flaw may be represented by a part-through crack perpendicular to the plate surface, the net ligaments in the plane of the crack and through-the-thickness narrow strips ahead of the crack ends are fully yielded, and in the yielded sections the material may carry only a constant normal traction with magnitude equal to the yield strength. The problem is solved by neglecting the bending effects and the crack opening stretches at the center and the ends of the crack are obtained. Some applications of the results are indicated by using the concepts of critical crack opening stretch and constant slope plastic instability.

Erdogan, F.↗

NASA NTRS1975

Crack opening stretch in a plate of finite width

Erdogan, F.↗

NASA NTRS1999

SHADOZ (Southern Hemisphere ADditional OZonesondes): A New Ozonesonde Data Set for the Earth Science Community

In the past several years, new tropical tropospheric ozone data products have been developed from TOMS and other satellites. Global chemical-transport models have been developed for interpretation of satellite data and to predict future ozone levels in the troposphere and stratosphere. However, the lack of ozone profile measurements for validation and evaluation of these data sets and models is critical in regions like the tropics. In 1998 NASA/Goddard Space Flight Center, in partnership with NOAA/CMDL (Climate Monitoring and Diagnostics Lab) and other nations, began a 2-year project to collect weekly ozonesonde measurements at southern hemisphere tropical sites and make the data available to the scientific community at a single electronic location: http://code9lQ.gsfc.nasa.gov/Data services/Shadoz/shadoz hmpq2.htmi A summary of data from the SHADOZ sites will be presented: Ascension Island, Fiji, Tahiti, Galapagos, American Samoa, Natal (Brazil), Reunion Island, Watukosek (Java), Nairobi and Irene, South Africa. SHADOZ is designed to meet other needs: (1) Provide the first climatology of tropical ozone along the equatorial zone for the wave-one pattern in total ozone; (2) Supplement field project observations. (3) Guide algorithm development for future satellite instruments; (4) Train scientists and educators in southern hemisphere tropical locations. From time to time, intensive tropical campaigns are making data available to SHADOZ. Data from the first half of 1999 will include INDOEX (Indian Ocean Experiment), SOWER (Stratospheric Ozone and Water in the Equatorial Region) at Christmas Island (2N, 157W), and a cruise from Norfolk, Virginia to Cape Town and Mauritius on NOAA's RN 'Ronald H Brown.'

Witte, J. C.↗