Search NASA⌕ Search

SEARCH · Search NASA

Results for “Crystal lattices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Beyond Graphene: Low-Symmetry and Anisotropic 2D Materials

Low-symmetry 2D materials—such as ReS 2 and ReSe 2 monolayers, black phosphorus monolayers, group-IV monochalcogenide monolayers, borophene, among others—have more complex atomistic structures than the honeycomb lattices of graphene, hexagonal boron nitride, and transition metal dichalcogenides. The reduced symmetries of these emerging materials give rise to inhomogeneous electron, optical, valley, and spin responses, as well as entirely new properties such as ferroelasticity, ferroelectricity, magnetism, spin-wave phenomena, large nonlinear optical properties, photogalvanic effects, and superconductivity. Novel electronic topological properties, nonlinear elastic properties, and structural phase transformations can also take place due to low symmetry. Lastly, the “Beyond Graphene: Low-Symmetry and Anisotropic 2D Materials” Special Topic was assembled to highlight recent experimental and theoretical research on these emerging materials.

2D materials↗
DOE OSTI2020

Carrier mobilities of (001) cadmium arsenide films

We investigate (001)-oriented films of the topological semimetal cadmium arsenide (Cd 3 As 2 ) grown by molecular beam epitaxy on lattice-matched III–V Al x In 1-x Sb buffer layers. Magnetotransport studies and analysis of thin film microstructures are used to determine the influence of dislocations on their carrier mobilities. We show that only a minority of the threading dislocations present in the buffer layers extend into the Cd 3 As 2 films. Threading dislocations are shown to reduce the mobilities of carriers residing in the topological surface states, while bulk transport was unaffected by a change in the dislocation density across an order of magnitude. Thick (001) Cd 3 As 2 films exhibit electron mobilities of up to 41 000 cm 2 V -1 s -1 at 2 K. The results provide insights into the influence of extended defects on the transport properties of a prototype topological semimetal.

36 MATERIALS SCIENCE↗
DOE OSTI2022

X-ray nano-imaging of defects in thin film catalysts via cluster analysis

Functional properties of transition-metal oxides strongly depend on crystallographic defects; crystallographic lattice deviations can affect ionic diffusion and adsorbate binding energies. Scanning x-ray nanodiffraction enables imaging of local structural distortions across an extended spatial region of thin samples. Yet, localized lattice distortions remain challenging to detect and localize using nanodiffraction, due to their weak diffuse scattering. Here, in this study, we apply an unsupervised machine learning clustering algorithm to isolate the low-intensity diffuse scattering in as-grown and alkaline-treated thin epitaxially strained SrIrO 3 films. We pinpoint the defect locations, find additional strain variation in the morphology of electrochemically cycled SrIrO 3 , and interpret the defect type by analyzing the diffraction profile through clustering. Our findings demonstrate the use of a machine learning clustering algorithm for identifying and characterizing hard-to-find crystallographic defects in thin films of electrocatalysts and highlight the potential to study electrochemical reactions at defect sites in operando experiments.

42 ENGINEERING↗
DOE OSTI2021

Interface-driven magnetic anisotropy in relaxed La 0.7 Sr 0.3 CrO 3 /La 0.7 Sr 0.3 MnO 3 heterostructures on MgO

We investigate the structural and magnetic properties of La 0.7 Sr 0.3 CrO 3 /La 0.7 Sr 0.3 MnO 3 (LSMO) heterostructures grown on (001)-oriented MgO by molecular beam epitaxy. Due to the large film-substrate lattice mismatch, strain relaxation is found to occur within the first 2–3 unit cells (uc) of the film as evidenced by reflection high energy electron diffraction and high-resolution synchrotron x-ray reciprocal space mapping. Furthermore, we find that the presence of the LSCO spacer and capping layers leads to ferromagnetism in ultra-thin LSMO layers with thicknesses of the order of 2 uc with the magnetic easy axis oriented in the film plane. Net magnetic moments of 1.4 and 2.4 μ B /Mn are measured for (2 uc LSCO/2 uc LSMO) and (2 uc LSCO/4 uc LSMO) superlattices, respectively, by superconducting quantum interference device magnetometry. The effective magnetic anisotropy of the relaxed (2 uc LSCO/4 uc LSMO) heterostructure is found to be an order of magnitude higher than bulk LSMO highlighting the critical role of interfacial interactions in tuning magnetic anisotropy at complex oxide interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

A transmission electron microscopy study of dislocation propagation and filtering in highly mismatched GaSb/GaAs heteroepitaxy

Monolithic integration of lattice-mismatched semiconductor materials opens up access to a wide range of bandgaps and new device functionalities. However, it is inevitably accompanied by defect formation. A thorough analysis of how these defects propagate and interact with interfaces is critical to understanding their effects on device parameters. In this study, we present a comprehensive study of dislocation networks in the GaSb/GaAs heteroepitaxial system using transmission electron microscopy (TEM). Specifically, the sample analyzed is a GaSb film grown on GaAs using dislocation–reduction strategies such as interfacial misfit array formation and introduction of a dislocation filtering layer. Using various TEM techniques, it is shown that such an analysis can reveal important information on the dislocation behavior including filtering mechanism, types of dislocation reactions, and other interactions with interfaces. A novel method that enables plan-view imaging of deeply embedded interfaces using TEM and a demonstration of independent imaging of different dislocation types are also presented. While clearly effective in characterizing dislocation behavior in GaSb/GaAs, we believe that the methods outlined in this article can be extended to study other heteroepitaxial material systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Crack formation in strained β-(AlxGa 1−x ) 2 O 3 films grown on (010) β-Ga 2 O 3 substrates

The cracking and local strain relaxation in (010) (Al x Ga 1−x ) 2 O 3 films grown on Ga 2 O 3 substrates are assessed in terms of film composition and thickness. We utilize x-ray diffraction and electron microscopy techniques combined with simulation and modeling to investigate that film cracking on curvature (flatness) has a directly proportional relationship with film thickness and/or aluminum content. Cross section transmission electron microscopy reveals that cracks along both the (001) and (100) cleavage planes penetrate into the substrate. The diffuse scattered intensity observed in reciprocal space maps (RSMs) is directly correlated with the tilt that is introduced due to the change in the deformation conditions near the cracks. While asymmetric RSMs show that the layers are fully strained, the diffuse scattering distribution in reciprocal space can be interpreted to show that the cracking relaxes and locally tilts the lattice ∼350 nm from the crack edges, which is consistent with the larger radius of curvature associated with the films with higher crack densities. For example, a 200 nm (Al 0.13 Ga 0.87 ) 2 O 3 thick film has an average inter-crack spacing of 3.3 µm, so most of the epitaxial layer is fully strained except near the cracks where it deforms elastically and is consistent with the gallium oxide Poisson ratio. A reciprocal space model was developed, which imports the strain and tilt distributions (based on finite element modeling) to match the features observed in the experimental maps. We also note that previous studies involving (Al x Ga 1−x ) 2 O 3 films may show evidence of cracking as observed in their symmetric and asymmetric RSMs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Hydrogen bond arrangements in (H 2 O) 20, 24, 28 clathrate hydrate cages: Optimization and many-body analysis

Here we provide a detailed study of hydrogen bonding arrangements, relative stability, residual entropy, and an analysis of the many-body effects in the (H 2 O) 20 (D-cage), (H 2 O) 24 (T-cage), and (H 2 O) 28 (H-cage) hollow cages making up structures I (sI) and II (sII) of clathrate hydrate lattices. Based on the enumeration of the possible hydrogen bonding networks for a fixed oxygen atom scaffold, the residual entropy (S 0 ) of these three gas phase cages was estimated at 0.754 82, 0.754 44, and 0.754 17 · Nk b , where N is the number of molecules and k b is Boltzmann’s constant. A previously identified descriptor of enhanced stability based on the relative arrangement and connectivity of nearest-neighbor fragments on the polyhedral water cluster [strong-weak-effective-bond model] also applies to the larger hollow cages. The three cages contain a maximum of 7, 9, and 11 such preferable arrangements of trans nearest dimer pairs with one “free” OH bond on the donor molecule (t1d dimers). The Many-Body Expansion (MBE) up to the 4-body suggests that the many-body terms vary nearly linearly with the cluster binding energy. Using a hierarchical approach of screening the relative stability of networks starting from optimizations with the TIP4P, TTM2.1-F, and MB-pol classical potentials, subsequently refining at more accurate levels of electronic structure theory (DFT and MP2), and finally correcting for zero-point energy, we were able to identify a group of four low-lying isomers of the (H 2 O) 24 T-cage, two of which are antisymmetric and the other two form a pair of antipode configurations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

SnSe 1-x S x Alloys: Anisotropic Van der Waals Semiconductors with Tunable Bandgaps

Alloying is one of the main tools of bandgap engineering, allowing the tuning of crystal structure, lattice parameters, and electronic structure of 3D and 2D/layered semiconductors. Among the latter, it can play a key role in tailoring the properties of tin monochalcogenides, a class of van der Waals semiconductors of interest for optoelectronics, thermoelectrics, ferroelectrics, and valleytronics. Here, the study investigates the synthesis and properties of large flakes of the anion substitution alloys SnSe 1-x S x . Alloy flakes across a wide range of compositions are obtained systematically by repeated growth from the same mixed (SnS, SnSe) powder precursor. Combined experiment and theory show full miscibility for all compositions, along with tunable lattice constants, bandgaps, and vibrational modes. Atomic resolution imaging demonstrates the accumulation of S and Se in alternating layers in the SnSe 1-x S x unit cell, attributed to growth kinetics. Polarized Raman spectroscopy confirms anisotropic vibrational modes; the calculated and measured band structure shows systematic changes in the band edge energies and anisotropic electronic structure due to the anisotropic in-plane lattice of the monochalcogenides. Cathodoluminescence, finally, indicates that a unique configuration of two non-degenerate, direct valleys along orthogonal k-space directions persists all the way from SnS to SnSe, making SnSe 1-x S x alloys interesting for valleytronics.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of Solution Treatment on the Microstructure, Micromechanical Properties, and Kinetic Parameters of the β → α Phase Transformation during Continuous Cooling of Ti-6Al-4V Titanium Alloy

The aim of this study is to examine the effect of solution treatment temperature (STT) on the microstructure, the micromechanical properties, and the kinetic parameters of the β → α phase transformation during continuous cooling of the dual phase titanium alloy Ti-6Al-4V. Increasing the STT from 1050 to 1200 °C delays the formation of the α phase during cooling and increases the value of its activation energy. The microstructural analysis reveals the emergence of α{sub W} platelets from protuberances on the α{sub GB}/α{sub W} interface. The investigation of the morphology of the α{sub W} platelets reveals the presence of ledges on their longest side showing a sharp extremity. The micromechanical properties determined by nanoindentation and microhardness tests are almost insensitive to the cooling rate but are strongly affected by the STT; the higher the STT, the lower the overall microhardness of the Ti-6Al-4V alloy. In addition, the STT affects the microhardness and the Young’s modulus of both α and β phases differently; when the STT increases, the microhardness and the Young’s modulus of the α phase decrease, whereas those of the β phase increases.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Optimization of Interlayer/CrWN Bilayer Films Fabricated and Monitored under Shewhart Control

Chromium tungsten nitride (CrWN) films were deposited onto SUS 304 stainless steel, cutter inserts and glass substrates using direct current reactive magnetron sputtering, with pure W and Cr metal targets. The deposition parameters for the interlayer (W and WN) with multiple qualities were optimized using the gray Taguchi method. The microstructure of these coatings was determined using x-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy and transmission electron microscopy. The results showed that the mechanical properties of bilayer samples with an interlayer of WN nitride film are superior to those with a W metal interlayer. Moreover, increasing the N{sub 2}/(N{sub 2} + Ar) flow ratio and working pressure enhanced the microhardness and the elastic recovery for coatings with an interlayer/CrWN bilayer. Dry milling tests also showed that bilayer film coatings have better mechanical performance. This increase in multiple performance characteristics is attributed to a bilayer that is manufactured using the gray Taguchi method. Control charts, which are powerful tools and widely used, were employed to monitor and ensure high-quality fabrication of the interlayer/CrWN bilayer and to show the coating processes to be stable and well regulated.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of Electropulsing on Surface Mechanical Behavior and Microstructural Evolution of Inconel 718 during Ultrasonic Surface Rolling Process

In the current study, the surface mechanical behavior and microstructural evolution of Inconel 718 superalloy processed by the ultrasonic surface rolling process (USRP) and electropulsing-assisted ultrasonic surface rolling process (EP-USRP) were carefully analyzed. The experimental results suggested that after EP-USRP with a frequency of 400 Hz, significant enhancements in Vickers microhardness and nanoindentation hardness were achieved compared to those of USRP specimens, with increases of 13.6 and 9.9%, respectively. Moreover, the machined surface quality, wear resistance, and thermal stability were also improved after EP-USRP (400 Hz). These enhancements in mechanical behavior are closely related to the microstructural evolution induced by electropulsing. Under the coupling of thermal and athermal effects of high-energy electropulsing, the deformation limit of USRP is surpassed and a new balance is achieved between the electropulsing softening effect and the ultrasonic rolling hardening effect. Therefore, further grain refinement, improved plastic deformation ability in the strengthened layer, and the interaction effect between nano-sized precipitates and grain boundaries are probably the main reasons for these results.

36 MATERIALS SCIENCE↗
DOE OSTI2022

From ammonium Hexahalorhenates(IV) to nanocrystalline rhenium metal: A combined thermal, diffraction and microscopic analysis

Rhenium metal powder is a material of industrial importance. Several industrial and laboratory methods have been developed for the preparation of ultrafine Re metal powder and nanoparticles. The present study provides a better understanding of the characteristic and formation of Re metal powder from the decomposition of (NH4)2ReX6 salt (X = F, Cl, Br, I) at high temperature in inert atmosphere. Such analysis resulted in the formation of nanocrystalline Re metal as characterized by powder XRD. Williamson-Hall, Scherrer, and Williamson-Smallman methods were employed to study the effect of crystallize size, lattice strain, and dislocation density as analyzed from powder XRD peak broadening. Here, the morphology and composition of the metal were analyzed using scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Colloidal Synthesis of Single-Layer Quasi-Ruddlesden–Popper Phase Bismuth-Based Two-Dimensional Perovskite Nanosheets with Controllable Optoelectronic Properties

Single- and few-layered two-dimensional (2D) nanomaterials have attracted intense research interest in the last two decades due to their unique electronic and optoelectronic properties leading to various potential applications. Herein, we report the colloidal synthesis of Bi-based 2D perovskite nanosheets (PEG6-NH 3 +) n Cs 3-n Bi 2 X 9 , where X = CI, Br, and I, through careful design of reaction conditions and selection of poly(ethylene glycol) (PEG6) surface passivating ligands. The 2D nanosheets are similar to 5 nm in thickness with micron-sized lateral dimensions and display composition-dependent band gap and work function modulation. Furthermore, small-angle X-ray scattering analysis substantiates that the individual inorganic crystal layer, Cs 3-n Bi 2 X 9 , is separated by the spacer, PEG6 ligand. Additionally, we determined that PEG6-NH 2 is an essential passivating ligand and spacer for the formation of Bi-based 2D nanosheets. Most importantly, controlled crystallization of the colloidal dispersion of nanosheets results in the formation of superlattice microstructures of the quasi-Ruddlesden-Popper phase. These microstructures can be exfoliated to ultrathin nanosheets by overcoming the van der Waals interaction between the organic passivating layers. The controlled synthesis of lead-free 2D perovskite nanosheets presented here can expand their utility to photocatalytic and optoelectronic applications with reduced toxicity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Macroscopic Monochalcogenide van der Waals Ferroics: Growth, Domain Structures, and Curie Temperature

Two-dimensional and layered van der Waals materials promise to overcome the limitations of conventional ferroelectrics in terms of miniaturization and material integration, but synthesis has produced only small (up to few micrometer-sized) ferroic crystals. Here, we report the realization of in-plane ferroelectric few-layer crystals of the monochalcogenides tin(II) sulfide and selenide (SnS, SnSe) whose linear dimensions exceed the current state of the art by up to 1 order of magnitude. Such large crystals allow the investigation of ferroic domain patterns that are unaffected by edges and finite-size effects. Analysis of the abundant stripe domains by electron microscopy and nanobeam electron diffraction shows two distinct domain types: twin domains separated by positively charged walls with alternating head-to-head and tail-to-tail polarization as well as not previously observed purely rotational domains connected by neutral domain walls with head-to-tail dipoles. Access to large crystals allowed the determination of the Curie temperature of few-layer SnSe van der Waals ferroelectrics, and it enables the investigation of this class of ferroelectrics by widely available methods such as polarized optical microscopy. Furthermore, the combination with layer transfer protocols promises uniform materials for exploring fundamentals and for implementing devices for information processing and energy conversion.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tunable valleytronics with symmetry-retaining high polarization degree in SnS x Se 1–x model system

SnS has recently been shown to possess unique valleytronic capability with a large polarization degree, where non-degenerate valleys can be accessed using linearly polarized light, bestowed upon by the unique anisotropy and wavefunction symmetry. It is thus of utmost importance to demonstrate the extension of such effects for the IV–VI system in general, thereby elucidating the generality and tunability of such valleytronics. In this study, we show the highly tunable valleytronics via gradual compositional control of the tin(II) sulfo-selenide (SnS x Se 1–x ) alloy system with excellent retainment of symmetry-determined selection rules. We show the presence of both ΓY and ΓX valleys in all alloy compositions via selectivity in absorption and emission of linearly polarized light by optical reflection (R)/transmission (T) and photoluminescence measurements and tuned the bandgaps of the valleys within a range of 1.28 eV–1.05 eV and 1.48 eV–1.24 eV, respectively. This simultaneous tuning of non-degenerate valleys agrees well with theoretical calculations. We then fitted the bandgap values in compositional space, obtaining bowing parameters as a useful database. We further demonstrated the feasibility of using IV–VI valleytronics systems in general by elucidating the retainment of strong polarization degrees of as high as 91% across all compositions. The generalization of such purely symmetry-dependent valleytronics also opens up opportunities for the discovery of more multi-functional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Predicting metal–metal interactions. II. Accelerating generalized schemes through physical insights

Operando-computational frameworks that integrate descriptors for catalyst stability within catalyst screening paradigms enable predictions of rates and selectivity on chemically faithful representations of nanoparticles under reaction conditions. These catalyst stability descriptors can be efficiently predicted by density functional theory (DFT)-based models. The alloy stability model, for example, predicts the stability of metal atoms in nanoparticles with site-by-site resolution. In this work, we use physical insights to present accelerated approaches of parameterizing this recently introduced alloy-stability model. These accelerated approaches meld quadratic functions for the energy of metal atoms in terms of the coordination number with linear correlations between model parameters and the cohesive energies of bulk metals. By interpolating across both the coordination number and chemical space, these accelerated approaches shrink the training set size for 12 fcc p- and d-block metals from 204 to as few as 24 DFT calculated total energies without sacrificing the accuracy of our model. We validate the accelerated approaches by predicting adsorption energies of metal atoms on extended surfaces and 147 atom cuboctahedral nanoparticles with mean absolute errors of 0.10 eV and 0.24 eV, respectively. This efficiency boost will enable a rapid and exhaustive exploration of the vast material space of transition metal alloys for catalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Structural coupling and magnetic tuning in Mn 2– x Co x P magnetocalorics for thermomagnetic power generation

Promising materials for magnetic refrigeration and thermomagnetic power generation often display strong coupling between magnetism and structure. It has been previously proposed that MnCoP exhibits this strong coupling, contributing to its substantial magnetocaloric effect near T C = 578K. Here, we show from temperature-dependent synchrotron x-ray diffraction that MnCoP displays a discontinuity in the thermal expansion at T C , with spontaneous magnetostriction that is positive in the a direction and negative in the b direction, highlighting the anisotropic nature of the magnetostructural coupling. Varying the Mn:Co ratio of Mn 2– x Co x P within the range of 0.6 ≤ x ≤ 1.4 allows the magnetic properties to be tuned. T C decreases as the composition deviates from stoichiometric MnCoP, as does the saturation magnetization. The magnitude of the magnetocaloric effect, |Δ S M |, decreases as well, due to broadening of the magnetic transition. The large reversible change in magnetization Δ M accessible over a small temperature range under moderate magnetic fields makes these materials promising for thermomagnetic power generation from waste heat.

36 MATERIALS SCIENCE↗