SEARCH · Search NASA

Results for “DIP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS2013

The Effects of Magnetic-field Geometry on Longitudinal Oscillaitons of Solar Prominences

We investigate the influence of the geometry of the solar filament magnetic structure on the large-amplitude longitudinal oscillations. A representative filament flux tube is modeled as composed of a cool thread centered in a dipped part with hot coronal regions on either side.We have found the normal modes of the system and establish that the observed longitudinal oscillations are well described with the fundamental mode. For small and intermediate curvature radii and moderate to large density contrast between the prominence and the corona, the main restoring force is the solar gravity. In this full wave description of the oscillation a simple expression for the oscillation frequencies is derived in which the pressure-driven term introduces a small correction. We have also found that the normal modes are almost independent of the geometry of the hot regions of the tube. We conclude that observed large-amplitude longitudinal oscillations are driven by the projected gravity along the flux tubes and are strongly influenced by the curvature of the dips of the magnetic field in which the threads reside.

Luna, M.↗

NASA NTRS2013

A Computational Fluid Dynamics Study of Swirling Flow Reduction by using Anti-vortex Baffle

An anti-vortex baffle is a liquid propellant management device placed adjacent to an outlet of the propellant tank. Its purpose is to substantially reduce or eliminate the formation of free surface dip and vortex, as well as prevent vapor ingestion into the outlet, as the liquid drains out through the flight. To design an effective anti-vortex baffle, Computational Fluid Dynamic (CFD) simulations were undertaken for the NASA Ares I vehicle LOX tank subjected to the simulated flight loads with and without the anti-vortex baffle. The Six Degree-Of-Freedom (6- DOF) dynamics experienced by the Crew Launch Vehicle (CLV) during ascent were modeled by modifying the momentum equations in a CFD code to accommodate the extra body forces from the maneuvering in a non-inertial frame. The present analysis found that due to large moments, the CLV maneuvering has significant impact on the vortical flow generation inside the tank. Roll maneuvering and side loading due to pitch and yaw are shown to induce swirling flow. The vortical flow due to roll is symmetrical with respect to the tank centerline, while those induced by pitch and yaw maneuverings showed two vortices side by side. The study found that without the anti-vortex baffle, the swirling flow caused surface dip during the late stage of drainage and hence early vapor ingestion. The flow can also be non-uniform in the drainage pipe as the secondary swirling flow velocity component can be as high as 10% of the draining velocity. An analysis of the vortex dynamics shows that the swirling flow in the drainage pipe during the Upper Stage burn is mainly the result of residual vortices inside the tank due to conservation of angular momentum. The study demonstrated that the swirling flow in the drainage pipe can be effectively suppressed by employing the anti-vortex baffle.

Yang, H. Q.↗

NASA NTRS2012

Subaru Imaging of Asymmetric Features in a Transitional Disk in a Transitional Disk in Upper Scorpius

We report high-resolution (0.07 arcsec) near-infrared polarized intensity images of the circumstellar disk around the star 2MASS J16042165−2130284 obtained with HiCIAO mounted on the Subaru 8.2 m telescope. We present our H-band data, which clearly exhibit a resolved, face-on disk with a large inner hole for the first time at infrared wavelengths.We detect the centrosymmetric polarization pattern in the circumstellar material as has been observed in other disks. Elliptical fitting gives the semimajor axis, semiminor axis, and position angle (P.A.) of the disk as 63 AU, 62 AU, and −14◦, respectively. The disk is asymmetric, with one dip located at P.A.s of ∼85◦. Our observed disk size agrees well with a previous study of dust and CO emission at submillimeter wavelength with Submillimeter Array. Hence, the near-infrared light is interpreted as scattered light reflected from the inner edge of the disk. Our observations also detect an elongated arc (50 AU) extending over the disk inner hole. It emanates at the inner edge of the western side of the disk, extending inward first, then curving to the northeast. We discuss the possibility that the inner hole, the dip, and the arc that we have observed may be related to the existence of unseen bodies within the disk

protoplanetary disks↗

NASA NTRS2012

Large-Amplitude Longitudinal Oscillations in a Solar Filament

We have developed the first self-consistent model for the observed large-amplitude oscillations along filament axes that explains the restoring force and damping mechanism. We have investigated the oscillations of multiple threads formed in long, dipped flux tubes through the thermal nonequilibrium process, and found that the oscillation properties predicted by our simulations agree with the observed behavior. We then constructed a model for the large-amplitude longitudinal oscillations that demonstrates that the restoring force is the projected gravity in the tube where the threads oscillate. Although the period is independent of the tube length and the constantly growing mass, the motions are strongly damped by the steady accretion of mass onto the threads by thermal nonequilibrium. The observations and our model suggest that a nearby impulsive event drives the existing prominence threads along their supporting tubes, away from the heating deposition site, without destroying them. The subsequent oscillations occur because the displaced threads reside in magnetic concavities with large radii of curvature. Our model yields a powerful seismological method for constraining the coronal magnetic field and radius of curvature of dips. Furthermore, these results indicate that the magnetic structure is most consistent with the sheared-arcade model for filament channels.

lament axes↗

NASA NTRS1960

Distribution of Trapped Radiation in the Geomagnetic Field

The altitude dependence (360 to 2090 km) of the intensity of geomagnetically trapped radiation as measured with Explorer I (satellite 1958a) is given for a number of geographic locations. It is found that all intensity data in the vicinity of the magnetic dip equator and over the full range of longitude and of altitude can be represented satisfactorily by a single function of the scalar magnetic field intensity B. The value of B at the lower boundary of the inner zone of trapped radiation is a monotonically increasing function of magnetic dip latitude; such data from all available geographic locations are well represented by a single curve.

Yoshida, Sekiko↗

NASA NTRS2017

A Computational Fluid Dynamics Study of Swirling Flow Reduction by Using Anti-Vortex Baffle

An anti-vortex baffle is a liquid propellant management device placed adjacent to an outlet of the propellant tank. Its purpose is to substantially reduce or eliminate the formation of free surface dip and vortex, as well as prevent vapor ingestion into the outlet, as the liquid drains out through the flight. To design an effective anti-vortex baffle, Computational Fluid Dynamic (CFD) simulations were undertaken for the NASA Ares I vehicle LOX tank subjected to the simulated flight loads with and without the anti-vortex baffle. The Six Degree-Of-Freedom (6-DOF) dynamics experienced by the Crew Launch Vehicle (CLV) during ascent were modeled by modifying the momentum equations in a CFD code to accommodate the extra body forces from the maneuvering in a non-inertial frame. The present analysis found that due to large moments, the CLV maneuvering has a significant impact on the vortical flow generation inside the tank. Roll maneuvering and side loading due to pitch and yaw are shown to induce swirling flow. The vortical flow due to roll is symmetrical with respect to the tank centerline, while those induced by pitch and yaw maneuverings showed two vortices side by side. The study found that without the anti-vortex baffle, the swirling flow caused surface dip during the late stage of drainage and hence early vapor ingestion. The flow can also be non-uniform in the drainage pipe as the secondary swirling flow velocity component can be as high as 10% of the draining velocity. An analysis of the vortex dynamics shows that the swirling flow in the drainage pipe during the Upper Stage burn is mainly the result of residual vortices inside the tank due to the conservation of angular momentum. The study demonstrated that the swirling flow in the drainage pipe can be effectively suppressed by employing the anti-vortex baffle.

Yang, H. Q.↗

NASA NTRS2017

A Computational Fluid Dynamics Study of Swirling Flow Reduction by Using Anti-Vortex Baffle

An anti-vortex baffle is a liquid propellant management device placed adjacent to an outlet of the propellant tank. Its purpose is to substantially reduce or eliminate the formation of free surface dip and vortex, as well as prevent vapor ingestion into the outlet, as the liquid drains out through the flight. To design an effective anti-vortex baffle, Computational Fluid Dynamic (CFD) simulations were undertaken for the NASA Ares I vehicle LOX tank subjected to the simulated flight loads with and without the anti-vortex baffle. The Six Degree-Of-Freedom (6-DOF) dynamics experienced by the Crew Launch Vehicle (CLV) during ascent were modeled by modifying the momentum equations in a CFD code to accommodate the extra body forces from the maneuvering in a non-inertial frame. The present analysis found that due to large moments, the CLV maneuvering has a significant impact on the vortical flow generation inside the tank. Roll maneuvering and side loading due to pitch and yaw are shown to induce swirling flow. The vortical flow due to roll is symmetrical with respect to the tank centerline, while those induced by pitch and yaw maneuverings showed two vortices side by side. The study found that without the anti-vortex baffle, the swirling flow caused surface dip during the late stage of drainage and hence early vapor ingestion. The flow can also be non-uniform in the drainage pipe as the secondary swirling flow velocity component can be as high as 10% of the draining velocity. An analysis of the vortex dynamics shows that the swirling flow in the drainage pipe during the Upper Stage burn is mainly the result of residual vortices inside the tank due to the conservation of angular momentum. The study demonstrated that the swirling flow in the drainage pipe can be effectively suppressed by employing the anti-vortex baffle.

Yang, H. Q.↗

NASA NTRS2017

Atmospheric Modeling Using Accelerometer Data During Mars Atmosphere and Volatile Evolution (MAVEN) Flight Operations

The Mars Atmosphere and Volatile EvolutioN (MAVEN) spacecraft is a NASA orbiter designed to explore the Mars upper atmosphere, typically from 140 to 160 km altitude. In addition to the nominal science mission, MAVEN has performed several Deep Dip campaigns in which the orbit's closest point of approach, also called periapsis, was lowered to an altitude range of 115 to 135 km. MAVEN accelerometer data were used during mission operations to estimate atmospheric parameters such as density, scale height, along-track gradients, and wave structures. Density and scale height estimates were compared against those obtained from the Mars Global Reference Atmospheric Model and used to aid the MAVEN navigation team in planning maneuvers to raise and lower periapsis during Deep Dip operations. This paper describes the processes used to reconstruct atmosphere parameters from accelerometers data and presents the results of their comparison to model and navigation-derived values.

Tolson, Robert H.↗

NASA NTRS2016

NuSTAR Observations of the Black Hole GS 1354-645: Evidence of Rapid Black Hole Spin

We present the results of a NuSTAR study of the dynamically confirmed stellar-mass black hole GS 1354−645. The source was observed during its 2015 "hard" state outburst; we concentrate on spectra from two relatively bright phases. In the higher-flux observation, the broadband NuSTAR spectra reveal a clear, strong disk reflection spectrum, blurred by a degree that requires a black hole spin of a = cJ/ GM(sup 2) > or = 0.98 (1(sigma) statistical limits only). The fits also require a high inclination: theta approx. = 75(2)deg. Strong "dips" are sometimes observed in the X-ray light curves of sources viewed at such an angle; these are absent, perhaps indicating that dips correspond to flared disk structures that only manifest at higher accretion rates. In the lower flux observation, there is evidence of radial truncation of the thin accretion disk. We discuss these results in the context of spin in stellar-mass black holes, and inner accretion flow geometries at moderate accretion rates.

accretion disks↗

NASA NTRSDate not supplied

Wall-Modeled Large-Eddy Simulations of Jet Noise in Flight Conditions

A campaign of wall-modeled large-eddy simulations (WMLES) using structured curvilinear overlapping grids has been performed with the Launch Ascent and Vehicle Aerodynamics (LAVA) computational fluid dynamics (CFD) software to predict jet noise for single-stream axisymmetric round jets. The simulations address the new Prediction Uncertainty Reduction (PUR) technical challenge within the context of NASA’s Commercial Supersonic Technology (CST) project. The focus of this effort is to generate a simulation database for single-stream axisymmetric round nozzles at several operating points both for static (no ambient co-flow), and in-flight (M ͚ =0.3 co-flow) conditions. The operating conditions range in jet exit Mach number from 0.38 to 1.1 with nozzle temperature ratios (NTR) from 0.84 to 2.7. The effect of the flight-stream on far-field noise sound spectra is assessed. Comparison of LES predictions to microphone array measurements demonstrate good agreement within the resolved frequency range. A dip in the predicted low frequency noise spectra for observers between 120° and 145° is observed. This dip is smaller for lower Mach numbers and seems to be correlated to the Mach wave radiation angle. The Mach 1.1 jet shows broadband-shock associated noise. While the onset of BBSN appears to be captured correctly in WMLES, some differences in its magnitude and the prominent frequency at which it occurs persist between the experiment and the simulations. The effect of the outer nozzle boundary layer state created by the co-flow is assessed and shows to be important for accurate comparisons with experiments. A change of 2.5dB between a slip-wall condition and a artificially thickened turbulent boundary layer was observed. In addition, simulations were performed with an alternative nozzle geometry that includes a internal plug and has twice the nozzle exit diameter. These two configurations resulted in very comparable spectra which is consistent with experimental observations. A generally stronger deviation from experimental results is observed for in-flight cases compared to static conditions. The applicability and correct usage of acoustic analogies used for far-field propagation with strong turbulent co-flows needs to be investigated more systematically using canonical problems to improve comparisons between experiments and WMLES. This is especially true for coherent noise sources seen in BBSN.

CST↗

NASA NTRS2022

Layer by layer thin film fabrication with in-process laser patterning

A modification of the traditional layer by layer process where the substrate is irradiated with laser light during the polycation and/or polyanion dipping cycles is described. By adjusting the laser irradiation time during dipping, irradiation power, number of bilayers, and the location and speed of laser irradiation, a variety of structures with controlled thicknesses can be fabricated. Laser patterned multilayer PAH/PTEBS polymer thin films were fabricated and characterized with absorbance mapping to demonstrate several patterning approaches. Results for 1) two laser patterned tracks, 2) single laser patterned track with varied average laser power across the sample from a continuously variable neutral density filter, and 3) laser patterning using a beam sent through multiple circular apertures are described. Based on the variable neutral density filter laser pattern, for 20 bilayer PAH/PTEBS films, an absorbance difference between off and on pattern of 0.1 requires an average laser power of less than 15 mW at 405 nm. The patterns produced are on the scale of several millimeters, though they could be made much smaller by focusing the laser used for patterning.

Nanoengineering↗

NASA NTRS2023

Reflection and Timing Study of the Transient Black Hole X-Ray Binary MAXI J1803-298 with NuSTAR

The transient black hole X-ray binary MAXI J1803−298 was discovered on 2021 May 1, as it went into outburst from a quiescent state. As the source rose in flux it showed periodic absorption dips and fit the timing and spectral characteristics of a hard-state accreting black hole. We report on the results of a Target-of-Opportunity observation with NuSTAR obtained near the peak outburst flux beginning on 2021 May 13, after the source had transitioned into an intermediate state. MAXI J1803−298 is variable across the observation, which we investigate by extracting spectral and timing products separately for different levels of flux throughout the observation. Our timing analysis reveals two distinct potential quasiperiodic oscillations (QPOs) which are not harmonically related at 5.4 ± 0.2 Hz and 9.4 ± 0.3 Hz, present only during periods of lower flux. With clear relativistic reflection signatures detected in the source spectrum, we applied several different reflection models to the spectra of MAXI J1803−298. Here we report our results, utilizing high-density reflection models to constrain the disk geometry, and assess changes in the spectrum dependent on the source flux. With a standard broken power-law emissivity, we find a near-maximal spin for the black hole, and we are able to constrain the inclination of the accretion disk at 75° ± 2°, which is expected for a source that has shown periodic absorption dips. We also significantly detect a narrow absorption feature at 6.91 ± 0.06 keV with an equivalent width between 4 and 9 eV, which we interpret as the signature of a disk wind.

Benjamin M. Coughenour↗

NASA NTRSDate not supplied

Service Provider Technical Interchange

ATM-X subproject, DIP (Digital Information Platform) is hosting a Service Provider(SP) workshop to discuss Service Quality, Data Governance, Cybersecurity, and Interoperability. This workshop will provide an interactive forum for exchanging ideas with peers and experts. Service Providers have a chance to influence future developments and ensure that your services align with DIP’s vision of the future aviation ecosystem.

Cybersecurity↗

NASA NTRSDate not supplied

FAA/AES - NASA/DIP Technical Interchange Meeting

The purpose of this Technical Interchange Meeting (TIM) is to hold our second of several discussions on select DIP and AES-topics. The first AES- DIP Technical Interchange Meeting was an in-person event in Washington DC. This is a followup meeting to deep dive into some of the areas discussed during the 1st TIM

monitoring↗

DOE OSTI2024

Bubbler Design Updates for Nuclear Safeguards Applications

The accurate monitoring of molten salt is crucial for nuclear safeguards, particularly in the context of mixtures used in molten salt reactors and pyropocessing. To attain material accountancy in actinide bearing molten salts, fluid volume and density are needed. Previous work utilized a triple bubbler sensor to measure the fluid level and density in processing tanks. This triple bubbler system utilized three gas dip-tubes strategically positioned at different heights within the molten salt such that the molten salt level, density, and surface tension were determined simultaneously. This investigation explores the effectiveness of an updated bubbler design with larger internal diameters for the dip-tubes to reduce plugging. The findings of this study will provide valuable insights into a bubbler design and configuration for applications in nuclear safeguards. This will contribute to enhanced accountability and transparency in the monitoring of actinide bearing molten salts, promoting objectives in nuclear safeguards.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Bubbler Design Updates for Nuclear Safeguards Application

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2026

Analysis of the electrical double layer using electrochemical X-ray photoelectron spectroscopy

The element-sensitivity of X-ray spectroscopies offers the potential to disentangle the individual chemistries of water, ions, and adsorbates at the electrode-electrolyte interface in an element-by-element manner. However, targeted experimental design is needed to establish interface-sensitive in situ X-ray spectroscopy in a realistic electrochemical environment. Here, we demonstrate how electrochemical X-ray photoelectron spectroscopy (EC-XPS) in the dip-and-pull geometry can be used to specifically probe the behavior of ions in the electrical double layer. Taking the case study of a polycrystalline Au foil in 50 mM KClO 4 electrolyte, we tracked the electrochemical response of interfacial K + cations across a broad potential range. We show how, in combination with modeling, key parameters such as the potential of zero charge (PZC), ion packing behavior, dielectric saturation, and the electrostatic potential decay in the double layer can be extracted from the data. Importantly, we also analyze how the experimental conditions and non-idealities can influence the results and put forward criteria for reliable experimentation and data analysis.

Dip-and-pull↗

DOE OSTI2025

Facile synthesis of co-doped Carbon nanofibers for supercapacitor applications

Here, in this study, the synthesis and electrochemical performance of carbon nanofibers (CNFs) co-doped with aluminum (Al) and nitrogen (N) and decorated with zinc oxide (ZnO) nanoparticles are investigated. After electrospinning polyacrylonitrile (PAN) nanofibers, the nanofiber mats are coated with Al and ZnO precursors by the dip coating method and converted into carbon nanofibers by thermal treatments at 850 °C. Co-doping and nanoparticle decoration affect the efficacy of carbon nanofibers as supercapacitors. With a maximal specific capacitance of 206.28 Fg -1 , it is believed that our produced carbon nanofibers, which can effectively store the renewable energy resources required to meet the rising energy demand, offer superior electrochemical properties compared to traditional supercapacitor materials. The effective incorporation of Al, N, and ZnO into the CNF structure, in conjunction with enhanced electrochemical performance, represents a significant advancement in the development of functional carbon nanofibers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗