SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Test results confirm that the Deep Space Station (DSS) and Network Operations Control Center (NOCC) processing of telemetry, command, radio metric, and monitor data with the existing DSN Mark III-75 configuration will be unaffected by the recent change of the Ground Communications Facility (GCF) high-speed data subsystem to a clock rate of 7,200 bits per second.
The OASIS (Oceanic and Atmospheric Satellite Imaging System) is a satellite data processing and analysis software system being developed by the California Space Institute (Cal Space) for support of interdisciplinary and integrated earth sciences research programs. The system's software applications are integrated under a common executive, NASA's Transportable Application Executive (TAE). In this paper, TAE and the system software and hardware are described, and specific techniques used for ingesting, processing, analyzing, and graphically displaying data from many of the sensors presently being flown are presented. Scientific uses of these capabilities that are, or will shortly be, running under TAE at Cal Space are described.
The design and operation is reported of the power supply for the IUE data processing unit. Design specifications are presented along with performance data and parts selection. Illustrations show the completed circuit with and without its covers.
A hybrid computer program is presented which can process as many as 10 channels of sweep frequency data simultaneously. The program needs only the sine sweep signal used to drive the system, and its correponding quadrature component, to process the data. It can handle a maximum frequency range of 0.5 to 500 hertz. Magnitude and phase are calculated at logarithmically spaced points covering the frequency range of interest. When the sweep is completed, these results are stored in digital form. Thus, a tabular listing and/or a plot of any processed data channel or the transfer function relating any two of them is immediately available.
Systems analysis for ERTS NASA Data Processing Facility system and subsystems
Systems analysis for ERTS NASA Data Processing Facility subsystems, installation, and support functions
This paper reports on the data processing methods and techniques of measurements made by several miniature radiation spectrometers flying on different types of carriers within the Earth's atmosphere at aviation and balloon altitudes.
Video data from spacecraft photographic mission telemetry is scanned to generate digital tape computer program which prints out intensity points, cleans noise and telemetry drop-out, enhances contrast, modifies the picture, and calculates contour lines. The output is converted into new photographic film.
This software is an improvement on Version 2, which was described in EOS MLS Level 1B Data Processing, Version 2.2, NASA Tech Briefs, Vol. 33, No. 5 (May 2009), p. 34. It accepts the EOS MLS Level 0 science/engineering data, and the EOS Aura spacecraft ephemeris/attitude data, and produces calibrated instrument radiances and associated engineering and diagnostic data. This version makes the code more robust, improves calibration, provides more diagnostics outputs, defines the Galactic core more finely, and fixes the equator crossing. The Level 1 processing software manages several different tasks. It qualifies each data quantity using instrument configuration and checksum data, as well as data transmission quality flags. Statistical tests are applied for data quality and reasonableness. The instrument engineering data (e.g., voltages, currents, temperatures, and encoder angles) is calibrated by the software, and the filter channel space reference measurements are interpolated onto the times of each limb measurement with the interpolates being differenced from the measurements. Filter channel calibration target measurements are interpolated onto the times of each limb measurement, and are used to compute radiometric gain. The total signal power is determined and analyzed by each digital autocorrelator spectrometer (DACS) during each data integration. The software converts each DACS data integration from an autocorrelation measurement in the time domain into a spectral measurement in the frequency domain, and estimates separately the spectrally, smoothly varying and spectrally averaged components of the limb port signal arising from antenna emission and scattering effects. Limb radiances are also calibrated.
Two systems for processing remotely sensed image data have been discussed. The first system, IDECS, is a near real-time hardware system oriented towards processing multi-image data sets quickly and economically. The IDECS has convenient film input and color display output capabilities and implements simple kinds of decision rules. The second system, KANDIDATS, is a software system capable of performing many of the more sophisticated processing methods. Because of its monitor which handles all bookkeeping and its modular design, KANDIDATS easily allows the testing of new automatic processing techniques. After a new technique has been proven on KANDIDATS, it may be simplified and hard-wired in IDECS, thereby keeping the volume processing of remotely sensed data always up to the current state-of-the-art.
Simulation and analysis of the Space Shuttle Orbiter Digital Data Processing System (DDPS) are reported. The mated flight and postseparation flight phases of the space shuttle's approach and landing test configuration were modeled utilizing the Information Management System Interpretative Model (IMSIM) in a computerized simulation modeling of the ALT hardware, software, and workload. System requirements simulated for the ALT configuration were defined. Sensitivity analyses determined areas of potential data flow problems in DDPS operation. Based on the defined system requirements and the sensitivity analyses, a test design is described for adapting, parameterizing, and executing the IMSIM. Varying load and stress conditions for the model execution are given. The analyses of the computer simulation runs were documented as results, conclusions, and recommendations for DDPS improvements.
Data from the 'Copernicus' experiment is processed in four stages: setting up of basic arrays, data calibration, graphical display of results, and assignment of results to navigation parameters. Each stage is briefly discussed.
An analysis of current computer usage by major water resources users was made to determine the trends of usage and costs for the principal hydrologic users/models. The laws and empirical relationships governing the growth of the data processing loads were described and applied to project the future data loads. Data loads for ERTS CCT image processing were computed and projected through the 1985 era. The analysis showns significant impact due to the utilization and processing of ERTS CCT's data.
The Biospheric Information Systems Branch at NASA s Goddard Space Flight Center has developed three generations of Science Investigator-led Processing Systems for use with various remote sensing instruments. The first system is used for data from the MODIS instruments flown on NASA s Earth Observing Systems @OS) Terra and Aqua Spacecraft launched in 1999 and 2002 respectively. The second generation is for the Ozone Measuring Instrument flying on the EOS Aura spacecraft launched in 2004. We are now developing a third generation of the system for evaluation science data processing for the Ozone Mapping and Profiler Suite (OMPS) to be flown by the NPOESS Preparatory Project (NPP) in 2006. The initial system was based on large scale proprietary hardware, operating and database systems. The current OMI system and the OMPS system being developed are based on commodity hardware, the LINUX Operating System and on PostgreSQL, an Open Source RDBMS. The new system distributes its data archive across multiple server hosts and processes jobs on multiple processor boxes. We have created several instances of this system, including one for operational processing, one for testing and reprocessing and one for applications development and scientific analysis. Prior to receiving the first data from OMI we applied the system to reprocessing information from the Solar Backscatter Ultraviolet (SBUV) and Total Ozone Mapping Spectrometer (TOMS) instruments flown from 1978 until now. The system was able to process 25 years (108,000 orbits) of data and produce 800,000 files (400 GiB) of level 2 and level 3 products in less than a week. We will describe the lessons we have learned and tradeoffs between system design, hardware, operating systems, operational staffing, user support and operational procedures. During each generational phase, the system has become more generic and reusable. While the system is not currently shrink wrapped we believe it is to the point where it could be readily adopted, with substantial cost savings, for other similar tasks.
Automatic data processing system for pulse code modulation and pulse position modulation telemetry of sounding rockets
Software used with signature data processing system for automatic extraction of spectral information from multispectral band scanners - Vol. 2
Onboard spacecraft optical data processing system using paraboloidal mirror segments and gallium arsenide laser
Development of coherent optical data processing techniques applicable to detection of meteor trails and examination of properties