Search NASA⌕ Search

SEARCH · Search NASA

Results for “Descriptive statistics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

HIGH-RESOLUTION X-RAY IMAGING OF SUPERNOVA REMNANT 1987A

We report observations of the remnant of supernova 1987A with the High Resolution Camera (HRC) on board the Chandra X-ray Observatory. A direct image from the HRC resolves the annular structure of the X-ray remnant, confirming the morphology previously inferred by deconvolution of lower resolution data from the Advanced CCD Imaging Spectrometer. Detailed spatial modeling shows that a thin ring plus a thin shell gives statistically the best description of the overall remnant structure, and suggests an outer radius of 0.''96 +- 0.''05 +- 0.''03 for the X-ray-emitting region, with the two uncertainties corresponding to the statistical and systematic errors, respectively. This is very similar to the radius determined by a similar modeling technique for the radio shell at a comparable epoch, in contrast to previous claims that the remnant is 10%-15% smaller at X-rays than in the radio band. The HRC observations put a flux limit of 0.010 counts s{sup -1} (99% confidence level, 0.08-10 keV range) on any compact source at the remnant center. Assuming the same foreground neutral hydrogen column density as toward the remnant, this allows us to rule out an unobscured neutron star with surface temperature T {sup i}nfinity > 2.5 MK observed at infinity, a bright pulsar wind nebula or a magnetar.

79 ASTRONOMY AND ASTROPHYSICS↗

Virginia precipitation scatter experiment: Experiment description

A year's statistical data were acquired for the purposed of refining existing coordination procedures for the sharing of common frequency allocations between terrestrial and space services. The measurement program was conducted between October 3, 1970 and October 2, 1971, to empirically determine the cumulative distributions of scattering cross section per unit volume of hydrometeors at heights up to 9 km above the surface and of rain rate at the surface. The measurements were made in southeastern Virginia using a bistatic, continuous-wave, vertically polarized radar system operating at S- and X-band frequencies and tipping-bucket rain gages. The bistatic radar system was configured to represent an interference situation between a radio-relay system and a space communication system Earth terminal; the results may be interpreted as measured distributions of transmission loss for interference due to rain. A description of the experiment and equipment is included.

Levine, E.↗

Semantic Annotation of Complex Text Structures in Problem Reports

Text analysis is important for effective information retrieval from databases where the critical information is embedded in text fields. Aerospace safety depends on effective retrieval of relevant and related problem reports for the purpose of trend analysis. The complex text syntax in problem descriptions has limited statistical text mining of problem reports. The presentation describes an intelligent tagging approach that applies syntactic and then semantic analysis to overcome this problem. The tags identify types of problems and equipment that are embedded in the text descriptions. The power of these tags is illustrated in a faceted searching and browsing interface for problem report trending that combines automatically generated tags with database code fields and temporal information.

Malin, Jane T.↗

Unified description of the coupled-channels and statistical Hauser-Feshbach nuclear reaction theories for low energy neutron incident reactions

We incorporate the coupled-channels optical model into the statistical Hauser-Feshbach nuclear reaction theory, where the scattering matrix is diagonalized by performing the Engelbrecht-Weidenmüller transformation. This technique has been implemented in the coupled-channels optical model code ECIS by J. Raynal, and we extend this method so that all the open channels in a nucleon-induced reaction on a deformed nucleus can be calculated consistently.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A turbulence description of couette flow

Statistical mechanics for wall shear turbulence in couette flow based on Brownian motion and comparison with stochastic theory based on Navier-Stokes equation

Chung, P. M.↗

GazeAppraise v. 0.1

GazeAppraise advances the state of the art of gaze pattern analysis using methods that simultaneously analyze spatial and temporal characteristics of gaze patterns. GazeAppraise enables novel research in visual perception and cognition; for example, using shape features as distinguishing elements to assess individual differences in visual search strategy. Given a set of point-to-point gaze sequences, hereafter referred to as scanpaths, the method constructs multiple descriptive features for each scanpath. Once the scanpath features have been calculated, they are used to form a multidimensional vector representing each scanpath and cluster analysis is performed on the set of vectors from all scanpaths. An additional benefit of this method is the identification of causal or correlated characteristics of the stimuli, subjects, and visual task through statistical analysis of descriptive metadata distributions within and across clusters.

Wilson, Andrew↗

Calculation of binodals and spinodals in multicomponent alloys by different statistical methods with application to iron-copper-manganese alloys

A generalization of the pair-cluster (PC) approximation in the theory of disordered systems to multicomponent alloys is proposed. It is shown that phase equilibrium boundaries (binodals) calculated in the mean-field (MF) approximation, which is used in standard calculations of phase diagrams by the CALPHAD method, coincide with the results of rigorous calculations for dilute alloys; however, the application of these methods to calculating the boundaries of the stability region with respect to the decomposition of an alloy (spinodals) leads to large errors. At the same time, in the PC approximation, the description of all statistical properties, including binodals and spinodals, turns out to be exact for dilute alloys. The methods developed are illustrated by an example of iron-copper-manganese ternary alloys.

36 MATERIALS SCIENCE↗

Image-Based Empirical Modeling of the Plasmasphere

A new suite of empirical models of plasmaspheric plasma based on remote, global images from the IMAGE EUV instrument is proposed for development. The purpose of these empirical models is to establish the statistical properties of the plasmasphere as a function of conditions. This suite of models will mark the first time the plasmaspheric plume is included in an empirical model. Development of these empirical plasmaspheric models will support synoptic studies (such as for wave propagation and growth, energetic particle loss through collisions and dust transport as influenced by charging) and serves as a benchmark against which physical models can be tested. The ability to know that a specific global density distribution occurs in response to specific magnetospheric and solar wind factors is a huge advantage over all previous in-situ based empirical models. The consequence of creating these new plasmaspheric models will be to provide much higher fidelity and much richer quantitative descriptions of the statistical properties of plasmaspheric plasma in the inner magnetosphere, whether that plasma is in the main body of the plasmasphere, nearby during recovery or in the plasmaspheric plume. Model products to be presented include statistical probabilities for being in the plasmasphere, near thermal He+ density boundaries and the complexity of its spatial structure.

Adrian, Mark L.↗

A Bayesian Approach for Statistical–Physical Bulk Parameterization of Rain Microphysics. Part I: Scheme Description

A novel framework is proposed for the bulk parameterization of rain microphysics: the Bayesian Observationally Constrained Statistical–Physical Scheme (BOSS). It is designed to facilitate direct constraint by observations using Bayesian inference. BOSS combines existing process-level microphysical knowledge with flexible process rate formulations and parameters constrained by observations within a Bayesian framework. Furthermore, using a raindrop size distribution (DSD) normalization method that relates DSD moments to one another via generalized power series, generalized multivariate power expressions are derived for the microphysical process rates as functions of a set of prognostic DSD moments. The scheme is flexible and can utilize any number and combination of prognostic moments and any number of terms in the process rate formulations. This means that both uncertainty in parameter values and structural uncertainty associated with the process rate formulations can be investigated systematically, which is not possible using traditional schemes. In this paper, BOSS is compared to two- and three-moment versions of a traditional bulk rain microphysics scheme (denoted as MORR). It is demonstrated that some process formulations in MORR are analytically equivalent to the generalized power expressions in BOSS using one or two terms, while others are not. BOSS is able to replicate the behavior of MORR in idealized one-dimensional rainshaft tests, but with a much more flexible and systematic design. Part II of this study describes the application of BOSS to derive rain microphysical process rates and posterior parameter distributions in Bayesian experiments using Markov chain Monte Carlo sampling constrained by synthetic observations.

58 GEOSCIENCES↗

Power spectrum and form factor in random diagonal matrices and integrable billiards

Triggered by a controversy surrounding a universal behavior of the power spectrum in quantum systems exhibiting regular classical dynamics, we focus on a model of random diagonal matrices (RDM), often associated with the Poisson spectral universality class, and examine how the power spectrum and the form factor get affected by two-sided truncations of RDM spectra. Having developed a nonperturbative description of both statistics, we perform their detailed asymptotic analysis to demonstrate explicitly how a traditional assumption (lying at the heart of the controversy) – that the power spectrum is merely determined by the spectral form factor – breaks down for truncated spectra. This observation has important consequences as we further argue that bounded quantum systems with integrable classical dynamics are described by heavily truncated rather than complete RDM spectra. High-precision numerical simulations of semicircular and irrational rectangular billiards lend independent support to these conclusions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-throughput simulations for insight into grain boundary structure-property relationships and other complex microstructural phenomena

High-throughput simulations can be a powerful tool in the discovery of new materials and behaviors. As part of a special issue on Rising Stars in Computational Materials Science, this paper uses the work of the author to show how high-throughput simulations have had an impact in grain boundary structure-property relationships and other complex microstructural phenomena. The work demonstrates how new tools designed to analyze large datasets produced by high-throughput simulations are enabling comprehensive grain boundary structure-property relationships to be obtained. High-throughput simulations are also used to demonstrate the impact descriptive and inferential statistics has had in extracting key aspects of deformation in metallic glasses. Finally, several different examples are used to show a balanced approach between simulations designed to survey and simulations designed for detailed analysis. Together, the two approaches provide a comprehensive picture of the variety of behaviors that exist, while ensuring that the physics underlying the behaviors are thoroughly understood.

36 MATERIALS SCIENCE↗

Does size matter? An evaluation of length and proportion of information in environmental impact statements

Highlights: • Empirical analysis of length and proportion of information in EISs is presented. • Current EISs, in Brazil, are significantly longer than the early ones. • Baseline information is the most common element in EISs. • EIS length is affected by many variables, including project sector and size. • While relevant to decision-making, EIS length should be carefully regulated. - Abstract: For decades, authors and institutions have argued that the quality of Environmental Impact Statements (EISs) is somehow affected by the volume of information they contain. Both too little and too much information can be a problem. However, very few academic studies have addressed the issue of EIS length in detail. The objective of this article was to systematically analyze the volume of information presented in EISs, using Brazil as the empirical context. More specifically, this study evaluated the volume and proportion of information disclosed in 49 Brazilian EISs. This study also tried to identify sectorial variations and whether variables such as project size and number of pages in Terms of References are likely determinants of information volume. >146 thousand pages of EIS information were scrutinized in two rounds of content analysis. Data were organized in spreadsheets and then coded and analyzed through various descriptive and inferential statistical techniques. Overall, findings corroborate the fact that EISs are now significantly longer than the early ones, and still heavily loaded with baseline information. The average number of pages in EISs and in Non-technical Summaries was found to be 2993 and 94, respectively. Kruskal-Wallis and linear regression tests indicated that EIS length is likely affected by a combination of variables, including project size, territorial and sectorial characteristics. Such findings suggest that the historical approach of setting page limits to EISs through regulations and Terms of References is no longer appropriate for EIA practice in connection with large enterprises in Brazil, and arguably elsewhere. The article discusses its practical and academic implications, and highlights the need to further investigate the actual impacts of EIS length on decision-making.

54 ENVIRONMENTAL SCIENCES↗

Solid waste management challenges for cities in developing countries

Highlights: Black-Right-Pointing-Pointer Stakeholders. Black-Right-Pointing-Pointer Factors affecting performance waste management systems. Black-Right-Pointing-Pointer Questionnaire as Annex for waste management baseline assessment. - Abstract: Solid waste management is a challenge for the cities' authorities in developing countries mainly due to the increasing generation of waste, the burden posed on the municipal budget as a result of the high costs associated to its management, the lack of understanding over a diversity of factors that affect the different stages of waste management and linkages necessary to enable the entire handling system functioning. An analysis of literature on the work done and reported mainly in publications from 2005 to 2011, related to waste management in developing countries, showed that few articles give quantitative information. The analysis was conducted in two of the major scientific journals, Waste Management Journal and Waste Management and Research. The objective of this research was to determine the stakeholders' action/behavior that have a role in the waste management process and to analyze influential factors on the system, in more than thirty urban areas in 22 developing countries in 4 continents. A combination of methods was used in this study in order to assess the stakeholders and the factors influencing the performance of waste management in the cities. Data was collected from scientific literature, existing data bases, observations made during visits to urban areas, structured interviews with relevant professionals, exercises provided to participants in workshops and a questionnaire applied to stakeholders. Descriptive and inferential statistic methods were used to draw conclusions. The outcomes of the research are a comprehensive list of stakeholders that are relevant in the waste management systems and a set of factors that reveal the most important causes for the systems' failure. The information provided is very useful when planning, changing or implementing waste management systems in cities.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Perspective: The Asakura Oosawa model: A colloid prototype for bulk and interfacial phase behavior

In many colloidal suspensions, the micrometer-sized particles behave like hard spheres, but when non-adsorbing polymers are added to the solution a depletion attraction (of entropic origin) is created. Since 60 years the Asakura-Oosawa model, which simply describes the polymers as ideal soft spheres, is an archetypical description for the statistical thermodynamics of such systems, accounting for many features of real colloid-polymer mixtures very well. While the fugacity of the polymers (which controls their concentration in the solution) plays a role like inverse temperature, the size ratio of polymer versus colloid radii acts as a control parameter to modify the phase diagram: when this ratio is large enough, a vapor-liquid like phase separation occurs at low enough colloid packing fractions, up to a triple point where a liquid-solid two-phase coexistence region takes over. For smaller size ratios, the critical point of the phase separation and the triple point merge, resulting in a single two-phase coexistence region between fluid and crystalline phases (of “inverted swan neck”-topology, with possibly a hidden metastable phase separation). Furthermore, liquid-crystalline ordering may be found if colloidal particles of non-spherical shape (e.g., rod like) are considered. Also interactions of the particles with solid surfaces should be tunable (e.g., walls coated by polymer brushes), and interfacial phenomena are particularly interesting experimentally, since fluctuations can be studied in the microscope on all length scales, down to the particle level. Due to its simplicity this model has become a workhorse for both analytical theory and computer simulation. Recently, generalizations addressing dynamic phenomena (phase separation, crystal nucleation, etc.) have become the focus of studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exact milestoning

A new theory and an exact computer algorithm for calculating kinetics and thermodynamic properties of a particle system are described. The algorithm avoids trapping in metastable states, which are typical challenges for Molecular Dynamics (MD) simulations on rough energy landscapes. It is based on the division of the full space into Voronoi cells. Prior knowledge or coarse sampling of space points provides the centers of the Voronoi cells. Short time trajectories are computed between the boundaries of the cells that we call milestones and are used to determine fluxes at the milestones. The flux function, an essential component of the new theory, provides a complete description of the statistical mechanics of the system at the resolution of the milestones. We illustrate the accuracy and efficiency of the exact Milestoning approach by comparing numerical results obtained on a model system using exact Milestoning with the results of long trajectories and with a solution of the corresponding Fokker-Planck equation. The theory uses an equation that resembles the approximate Milestoning method that was introduced in 2004 [A. K. Faradjian and R. Elber, J. Chem. Phys. 120(23), 10880-10889 (2004)]. However, the current formulation is exact and is still significantly more efficient than straightforward MD simulations on the system studied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solving large scale structure in ten easy steps with COLA

We present the COmoving Lagrangian Acceleration (COLA) method: an N-body method for solving for Large Scale Structure (LSS) in a frame that is comoving with observers following trajectories calculated in Lagrangian Perturbation Theory (LPT). Unlike standard N-body methods, the COLA method can straightforwardly trade accuracy at small-scales in order to gain computational speed without sacrificing accuracy at large scales. This is especially useful for cheaply generating large ensembles of accurate mock halo catalogs required to study galaxy clustering and weak lensing, as those catalogs are essential for performing detailed error analysis for ongoing and future surveys of LSS. As an illustration, we ran a COLA-based N-body code on a box of size 100 Mpc/h with particles of mass ≈ 5 × 10{sup 9}M{sub s}un/h. Running the code with only 10 timesteps was sufficient to obtain an accurate description of halo statistics down to halo masses of at least 10{sup 11}M{sub s}un/h. This is only at a modest speed penalty when compared to mocks obtained with LPT. A standard detailed N-body run is orders of magnitude slower than our COLA-based code. The speed-up we obtain with COLA is due to the fact that we calculate the large-scale dynamics exactly using LPT, while letting the N-body code solve for the small scales, without requiring it to capture exactly the internal dynamics of halos. Achieving a similar level of accuracy in halo statistics without the COLA method requires at least 3 times more timesteps than when COLA is employed.

79 ASTRONOMY AND ASTROPHYSICS↗

Observing Quantum Measurement Collapse as a Learnability Phase Transition

During a quantum measurement, superpositions of states with different observable properties probabilistically collapse into one with a sharp value of the measured observable. In macroscopic quantum systems, this collapse arises via a continuous measurement-induced phase transition (MIPT) at a critical value of the strength of interaction with the measurement apparatus. MIPTs lie outside established paradigms for equilibrium or nonequilibrium critical phenomena and delineate distinct, stable dynamical and computational phases of matter. Quantum computers enable programmable simulation of the interaction of a measurement apparatus with a dynamical quantum system, to explore MIPT phenomena over a range of system sizes while retaining quantum coherence. Yet, existing experimental protocols rely on fundamentally nonscalable postselection techniques or direct classical simulation of quantum circuits. Here, we report the scalable observation of finite-size scaling evidence for an observable-sharpening MIPT in monitored quantum circuits in a chain of Yb + 171 ions in Quantinuum’s H1-1 trapped-ion quantum processor. By leveraging an equivalent description as a statistical physics problem, we implement scalable classical algorithms to infer the value of the measured observable from a single experimental shot. This technique enables a truly scalable protocol to observe observable-sharpening MIPTs in generic classes of circuits that cannot be directly classically simulated and also provides enhanced means to detect and suppress errors in the quantum simulation. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Confidence: Analyzing Performance With Empirical Probabilities

Variability in the performance of shared system components is a major obstacle in analyzing the effective throughput of leadership class computers. Shared file systems and networks are serious impediments to achieving repeatable application performance on HPC systems. In particular, performance analysts are likely to be interested in quantifying differences between average-case behavior, worst-case behavior, and standard deviation for shared system components. Typical descriptions of these statistics assume a normal distribution; however, in non-linear and multi-modal performance distributions, summary statistics are often misleading. In this paper we describe Confidence, a tool for analyzing the full spectrum of performance for a benchmarking code. By including all of the experimental outcomes in the analysis without discarding any measurements, Confidence enables a novel analysis of benchmark performance. Finally, we use Confidence to characterize the network performance of three high performance computer systems, and we provide recommendations for leveraging network performance in latency sensitive applications.

Settlemyer, Bradley W↗