SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This paper develops a modeling framework for systems engineering that encompasses systems modeling, task modeling, and knowledge modeling, and allows knowledge engineering and software engineering to be seen as part of a unified developmental process. This framework is used to evaluate what novel contributions the 'knowledge engineering' paradigm has made and how these impact software engineering.
A design criteria is obtained to compare two simulators and evaluate their equivalence or credibility. In the subsequent analysis the comparison of two simulators can be considered as the same problem as the comparison of a real world situation and a simulation's representation of this real world situation. The design criteria developed involves modeling of the human operator and defining simple parameters to describe his behavior in the simulator and in the real world situation. In the process of obtaining human operator parameters to define characteristics to evaluate simulators, measures are also obtained on these human operator characteristics which can be used to describe the human as an information processor and controller. First, a study is conducted on the simulator design problem in such a manner that this modeling approach can be used to develop a criteria for the comparison of two simulators.
Algebraic methods for analysis and design of model following control systems
The focus is on a flexible structure experiment developed at the California Institute of Technology. The main thrust of the experiment is to address the identification and robust control issues associated with large space structures by capturing their characteristics in the laboratory. The design, modeling, identification and control objectives will be discussed. Also, the subject of uncertainty in structural plant models and the frequency shaping of performance objectives will be expounded upon. Theoretical and experimental results of control laws designed using the identified model and uncertainty descriptions will be presented.
In low earth orbit (LEO) satellite applications spacecraft power is provided by photovoltaic cells and batteries. To overcome battery shortcomings the University of Maryland, working in cooperation with NASA/GSFC and NASA/LeRC, has developed a magnetically suspended flywheel for energy storage applications. The system is referred to as an Open Core Composite Flywheel (OCCF) energy storage system. Successful application of flywheel energy storage requires integration of several technologies, viz. bearings, rotor design, motor/generator, power conditioning, and system control. In this paper we present a parameter design method which has been developed for analyzing the linear SISO model of the magnetic bearing controller for the OCCF. The objective of this continued research is to principally analyze the magnetic bearing system for nonlinear effects in order to increase the region of stability, as determined by high speed and large air gap control. This is achieved by four tasks: (1) physical modeling, design, prototyping, and testing of an improved magnetically suspended flywheel energy storage system, (2) identification of problems that limit performance and their corresponding solutions, (3) development of a design methodology for magnetic bearings, and (4) design of an optimal controller for future high speed applications. Both nonlinear SISO and MIMO models of the magnetic system were built to study limit cycle oscillations and power amplifier saturation phenomenon observed in experiments. The nonlinear models include the inductance of EM coils, the power amplifier saturation, and the physical limitation of the flywheel movement as discussed earlier. The control program EASY5 is used to study the nonlinear SISO and MIMO models. Our results have shown that the characteristics and frequency responses of the magnetic bearing system obtained from modeling are comparable to those obtained experimentally. Although magnetic saturation is shown in the bearings, there are good correlations between the theoretical model and experimental data. Both simulation and experiment confirm large variations of the magnetic bearing characteristics due to air gap growth. Therefore, the gap growth effect should be considered in the magnetic bearing system design. Additionally, the magnetic bearing control system will be compared to other design methods using not only parameter design but H-infinity optimal control and mu synthesis.
Our main project objectives are to develop computational techniques based on inverse problem theory that can be used to design directional solidification processes that lead to desired temperature gradient and growth conditions at the freezing front at various levels of gravity. It is known that control of these conditions plays a significant role in the selection of the form and scale of the obtained solidification microstructures. Emphasis is given on the control of the effects of various melt flow mechanisms on the local to the solidification front conditions. The thermal boundary conditions (furnace design) as well as the magnitude and direction of an externally applied magnetic field are the main design variables. We will highlight computational design models for sharp front solidification models and briefly discuss work in progress toward the development of design techniques for multi-phase volume-averaging based solidification models.
Some problems associated with the design of model-reference adaptive control systems are considered and solutions to these problems are advanced. The stability of the adapted system is a primary consideration in the development of both the time-domain and the frequency-domain design techniques. Consequentially, the use of Liapunov's direct method forms an integral part of the derivation of the design procedures. The application of sensitivity coefficients to the design of model-reference adaptive control systems is considered. An application of the design techniques is also presented.
A correlation study was conducted to determine the ability of current analytical spin prediction techniques to predict the flight motions of a current fighter airplane configuration during the spin entry, the developed spin, and the spin recovery motions. The airplane math model used aerodynamics measured on an exact replica of the flight test model using conventional static and forced-oscillation wind-tunnel test techniques and a recently developed rotation-balance test apparatus capable of measuring aerodynamics under steady spinning conditions. An attempt was made to predict the flight motions measured during stall/spin flight testing of an unpowered, radio-controlled model designed to be a 1/10 scale, dynamically-scaled model of a current fighter configuration. Comparison of the predicted and measured flight motions show that while the post-stall and spin entry motions were not well-predicted, the developed spinning motion (a steady flat spin) and the initial phases of the spin recovery motion are reasonably well predicted.
A family of mercury ion thruster modules has been developed which extends the basic design of the Hughes-developed 1-mlb Engineering Model Thruster to accommodate the extended thrust range from 0.5 mlb to 4 mlb. In the subject program, separate Discharge Chamber Modules (DCM's) have been optimized for operation at nominal thrust levels T = 0.5 mlb and 2 mlb; DCM optimization is continuing at thrust level T = 4 mlb. Performance optimization required modification of the beam-extraction system and of discharge-chamber components; however, the cathodes and mechanical structure are unchanged from the Engineering Model design. Performance data on the optimized modules are given.
In an attempt to determine whether clear air turbulence (CAT) which caused a brief, intense turbulence encounter to a jetliner might have been related to gravity waves generated by a line of thunderstorms, local sounding data taken within two hours of the incident have been used as input to a numerical model designed to simulate stratified flow over obstacles. In the model a rigid obstacle at the lower boundary acted as the source of the gravity waves. The model results show a large amplitude disturbance localized over the obstacle at and above flight level, in regions where CAT would be expected. Stratification studies have been conducted, varying the height and shape of the obstacle and the input wind profile. The success of the experiment leads to the conclusion that atmospheric gravity wave simulation can be useful in understanding and possibly avoiding CAT.
Analytical and experimental techniques for the prediction and ground verification of the damped structural dynamics of space structures are developed. The options available for similarity-scaled model testing, including replica and multiple scale approaches, are reviewed. For the case when the distortion of potentially dissipative or nonlinear joints, which would be required in multiple-scale modeling, is impractical, a new type of modeling is introduced, which uses a hybrid of joints at replica scale and connecting elements at a modified multiple scale. The model design requirements for replica, multiple-scale, and hybrid models are developed, and the expected scaling of nonlinear dissipation in joints is derived. A damping prediction scheme is developed that relies on a finite element model of the undamped structure and measurements of the individual joint properties to predict the modal damping of the truss attributable to the joints. A hybrid-scaled model of a segment of the Space Station was built and dynamically tested. The predicted and measured truss damping compared favorably.
The Solid Modeling Aerospace Research Tool (SMART) is a computer aided design tool used in aerospace vehicle design. Modeling of structural components using SMART includes the representation of the transverse or cross-wise elements of a vehicle's fuselage, ringframes, and bulkheads. Ringframes are placed along a vehicle's fuselage to provide structural support and maintain the shape of the fuselage. Bulkheads are also used to maintain shape, but are placed at locations where substantial structural support is required. Given a Bezier curve representation of a cross sectional cut through a vehicle's fuselage and/or an internal tank, this project produces a first-guess Bezier patch representation of a ringframe or bulkhead at the cross-sectional position. The grid produced is later used in the structural analysis of the vehicle. The graphical display of the generated patches allows the user to edit patch control points in real time. Constraints considered in the patch generation include maintaining 'square-like' patches and placement of longitudinal, or lengthwise along the fuselage, structural elements called longerons.
This paper presents a covariance analysis of the performance and sensitivity of the attitude determination Extended Kalman Filter (EKF) used by the onboard computer (OBC) of the Extreme Ultra Violet Explorer (EUVE) spacecraft. The linearized dynamics and measurement equations of the error states are used in formulating the 'truth model' describing the order of the systems involved. The 'design model' used by the OBC EKF is then obtained by reducing the order of the truth model. The covariance matrix of the EKF which uses the reduced order model is not the correct covariance of the EKF estimation error. A 'true covariance analysis' has to be carried out in order to evaluate the correct accuracy of the OBC generated estimates. The results of such analysis are presented which indicate both the performance and the sensitivity of the OBC EKF.
The Spacecraft Control Laboratory Experiment (SCOLE) will allow direct experimental comparison of competing control schemes for large flexible spacecraft structures. The experiment was designed to emulate the essential characteristics of a mathematical model design challenge which represents a Space Shuttle with a flexible mast and antenna attached. This experiment represents the third in a series of three flexible structure control experiments used by the Flight Dynamics and Control Division at LaRC. The key problem addressed by the facility is that flexible motion of the mast and antenna must be considered in the slewing and pointing control problems.
The two-year mean (1993-1994) Dynamic Ocean Topography (DOT) field implied by the POCM_4B circulation model was used to develop normal equations for DOT, in a surface spherical harmonic representation. These normal equations were combined with normal equations from satellite tracking data, surface gravity data, and altimeter data from TOPEX/Poseidon and ERS-1. Several least-squares combination solutions were developed in this fashion, by varying parameters such as the maximum degree of the estimated DOT and the relative weights of the different data. The solutions were evaluated in terms of orbit fit residuals, GPS/Leveling-derived undulations, and independent DOT information from in situ WOCE hydrographic data. An optimal solution was developed in this fashion which was originally presented at the 1998 EGS meeting in Nice, France. This model, designated here PGM2000A, maintains the orbit and land geoid modeling performance of EGM96, while improving its marine geoid modeling capability. In addition, PGM2000A's error spectrum is considerably more realistic than those of other contemporary gravitational models and agrees well with the error spectrum of EGM96. We will present the development and evaluation of PGM2000A, with particular emphasis on the weighting of the DOT information implied by POCM_4B. We will also present an inter-comparison of PGM2000A with the GRIM5-C1 and TEG-4 models. Directions for future work and problematic areas will be identified.
A data reduction method, which is consistent with the performance prediction methods used for analysis of new aircraft designs, is defined and compared to the method currently used by NASA using data obtained from an Ames Res. Center 11 foot transonic wind tunnel test. Pressure and flow visualization data from the Ames test for both the powered straight underwing nacelle, and an unpowered contoured overwing nacelle installation is used to determine the flow phenomena present for a wind mounted turboprop installation. The test data is compared to analytic methods, showing the analytic methods to be suitable for design and analysis of new configurations. The data analysis indicated that designs with zero interference drag levels are achieveable with proper wind and nacelle tailoring. A new overwing contoured nacelle design and a modification to the wing leading edge extension for the current wind tunnel model design are evaluated. Hardware constraints of the current model parts prevent obtaining any significant performance improvement due to a modified nacelle contouring. A new aspect ratio wing design for an up outboard rotation turboprop installation is defined, and an advanced contoured nacelle is provided.
This is the Northrop Grumman final report for the Advanced High-Lift Leading-Edge Technologies for Laminar Wings conceptual design and demonstration program performed for the National Aeronautics and Space Administration Langley Research Center. Northrop Grumman conducted conceptual aerodynamic CFD and QFD analysis to downselect two leading-edge concepts for high lift. The effort included aerodynamic analysis to examine instrumentation placement and propulsion analysis to design internal cavity geometry of the high-pressure blown slot configurations. A wind tunnel model design created a 7-foot span model of the complex configuration. A wind tunnel test plan, which included baseline, deflected trailing-edge, blown deflected trailing-edge, blown leading-edge, morphed leading-edge, and blown/morphed leading-edge airfoil configurations was developed. As a result of this program approach, a successful demonstration of high-lift leading-edge technology was reached, and the target goals for improved lift were exceeded by 30% with a maximum section lift coefficient (Cl) of 5.2. Incremental lift coefficient (DCl) of 3.5 and 3.1 was achieved on the two laminar compatible airfoil configurations (at cruise). Our high-lift design yielded a massive 94% lift improvement over conventional high-lift Krueger flap configurations while providing laminar flow capability on the cruise configuration.
An analytical model for hydrogen reduction of regolith was used to investigate the effects of several key variables on the energy and mass performance of reactors for a lunar in-situ resource utilization oxygen production plant. Reactor geometry, reaction time, number of reactors, heat recuperation, heat loss, and operating pressure were all studied to guide hardware designers who are developing future prototype reactors. The effects of heat recuperation where the incoming regolith is pre-heated by the hot spent regolith before transfer was also investigated for the first time. In general, longer reaction times per batch provide a lower overall energy, but also result in larger and heavier reactors. Three reactors with long heat-up times results in similar energy requirements as a two-reactor system with all other parameters the same. Three reactors with heat recuperation results in energy reductions of 20 to 40 percent compared to a three-reactor system with no heat recuperation. Increasing operating pressure can provide similar energy reductions as heat recuperation for the same reaction times.