Search NASA⌕ Search

SEARCH · Search NASA

Results for “Doping effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Suppressing Carbon Incorporation in Metal–Organic Chemical Vapor Deposition GaN Using High‐Offcut‐Angled Substrates

Carbon (C) is a common impurity that acts as a compensator within GaN grown via metal–organic chemical vapor deposition (MOCVD). Reducing C in GaN will help reduce the compensation level and provide a route to achieve GaN with reliably low effective doping for high-power device applications. GaN grown with fast growth rates on bulk GaN with various offcut angles via conventional-MOCVD (C-MOCVD) and laser-assisted MOCVD (LA-MOCVD) is compared and analyzed. C-incorporation effects are compared through quantitative secondary-ion mass spectroscopy analysis in GaN grown on GaN substrate with offcut angles of 4° and 0.3° toward m-plane over a wide range of growth rates by C-MOCVD and LA-MOCVD. For both growth techniques investigated, a significant reduction in C-incorporation is observed when a high-offcut-angle (4°) substrate is used as compared to a lower-offcut-angle (0.3°) substrate. Furthermore, with C-MOCVD, at the fastest growth condition investigated (17.26 μm h −1 at 0.3°-offcut, 15.25 μm h −1 at 4°-offcut), a reduction in [C] by 21.2X is observed with an increase in the offcut angle from 0.3° to 4°. A 82.6X reduction in [C] is observed with the similar fast growth condition via LA-MOCVD on GaN with 4° offcut angle (9.78 μm h −1 ) as compared to C-MOCVD at 0.3° offcut angle (17.26 μm h −1 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing Oxygen Stability in Low-Cobalt Layered Oxide Cathode Materials by Three-Dimensional Targeted Doping

In this project, we propose to develop a new concept and a generic platform that can lead to the greatly enhanced stabilization of all high-energy cathode materials, and in particular high-nickel (Ni) and low-cobalt (Co) oxides. The new concept is a 3D doping technology that hierarchically combines surface and bulk doping. We will use surface doping to stabilize the surface of primary particles and also introduce dopants in the bulk to further enhance oxygen stability, conductivity, and structural stability in low-Co oxides under high voltage and deep discharging operating conditions. This new concept not only will deliver a low-cost, high-energy cathode but also will provide a generic method that can stabilize all high-energy cathodes. The proposed novel 3D doping approach is poised to resolve some longstanding challenges in fundamental doping effects on battery materials as well as to reduce Li-ion batteries’ cost and improve their safety, energy density, and lifetime. To tackle this problem, we have formed a highly complementary multi-university/national labs/industry team to enable a doping-central and systematic investigation of low-Co materials and create a knowledge base for many electrode materials to be used in advanced electric vehicles. The successful execution of the proposed project relies on five components that can be carried out by the complementary team members: (1) a theoretical investigation of the surface and bulk stabilizing dopants (Persson), (2) a precise synthesis of materials with targeted doping (Lin and Xin), (3) development of electrolytes for high-Ni low-Co oxides (Xu), (4) multi-scale characterization of the structures and their interfaces by scanning transmission electron microscopy (SEM) and synchrotron X-ray imaging and spectroscopy tools (Xin and Lin), and (5) pouch cell-level integration (Fan). The UCI-led project will enable a doping-central and systematic investigation of low-Co materials and create a knowledge base for many electrode materials to be used in advanced electric vehicles.

25 ENERGY STORAGE↗

Understanding the optoelectronic properties of doped 2D organic-inorganic halide perovskite quantum wells: towards efficient quantum well IR photodetectors

Metal halide perovskite (MHP) multiple quantum wells which consist of multilayers of alternate organic and inorganic layers exhibit large exciton binding energies due to the dielectric confinement between the inorganic and organic layers. These naturally formed multiple quantum wells have strong spin-orbit coupling (SOC) due to the presence of heavy elements in their crystal structures. Although the fundamental properties of 2D MHPs are far from being entirely understood, it is widely accepted that their band edge absorption coefficient results from strong exciton interactions. However, studies demonstrating how different exciton interactions and doping effects influence electronic traps and disorder on the band edge absorption coefficient of 2D MHPs have not been demonstrated. Understanding these interactions in MHPs will allow us to access low energy optical transitions for the fabrication of solution processable short-to-mid-wavelength IR photodetectors (1 – 8 μm). Moreover, upon doping, it is possible to move the Fermi energy into the conduction band (CB) to favorably promote the transport of charges in a working device. Herein, we study the development of 2D MHPs having strong SOC, high carrier mobility, and tunable quantum well structures. Our studies shed light on the design and modulation of fundamental physical phenomena by carefully elucidating the role of dopants (n-type and p-type), exciton heterogeneity, orientation, structure, and bias stress effects on the performance of MHPs as potential IR photodetectors.

36 MATERIALS SCIENCE↗

Electronic structure and thermoelectric properties of p-type Ag-doped Mg₂Sn and Mg₂Sn{sub 1-x}Si{sub x} (x=0.05, 0.1)

An experimental and theoretical study of p-type Ag-doped Mg₂Sn and Mg₂Sn{sub 1-x}Si{sub x} (x=0.05, 0.1) is presented. Band structure calculations show that behavior of Ag in Mg₂Sn depends on the site it occupies. Based on Bloch spectral functions and density of states calculations, we show that if Ag substitutes for Sn, it is likely to form a resonant level; if it substitutes for Mg, a rigid-band-like behavior is observed. In both cases, the doped system should exhibit p-type conductivity. Experimentally, thermoelectric, thermomagnetic, and galvanomagnetic properties are investigated of p-type Mg₂Sn{sub 1–x}Si{sub x} (x=0, 0.05, 0.1) samples synthesized by a co-melting method in sealed crucibles. Ag effectively dopes the samples p-type, and thermoelectric power factors in excess of 20μW cm⁻¹K⁻² are observed in optimally doped samples. From the measured Seebeck coefficient, Nernst coefficient, and mobility, we find that the combination of acoustic phonon scattering, optical phonon scattering and defect scattering results in an energy-independent scattering rate. No resonant-like increase in thermopower is observed, which correlates well with electronic structure calculations assuming the location of Ag on Mg site.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiation damage annealing kinetics

Various spectral response studies are reported that assess lithium doping effects on the recovery process of electron damaged silicon solar cells. Measurements of both the minority carrier lifetimes and the energy level spectrum of the defects are used to predict lifetime damage constants and carrier removal rates relevant to the operation of the solar lithium-doped cell and its annealing kinetics.

Dresselhaus, M. S.↗

Tuning superconductivity of Bi 2 Sr 2 CaCu 2 O 8+x by fluoride ion intercalation with LaF 3 gate dielectric

Here, we demonstrate fluorine intercalation into Bi 2 Sr 2 CaCu 2 O 8+x (BSCCO) flakes, as thick as 100 nm, by back-gating a single crystalline LaF 3 substrate. Element-sensitive analysis not only confirms the presence of fluorine in BSCCO after gating but also reveals lateral diffusion of fluorine in BSCCO. Transport measurements further demonstrate the hole-doping effect of fluoride ions in BSCCO through effective modulation of the superconducting transitions. Our work introduces a distinct type of ions (F - ) that can be intercalated into materials via solid state back-gating. It broadens the toolbox of ion back-gating and is useful for addressing exotic phenomena in the heavily hole doped regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A study of suppressed formation of low-conductivity phases in doped Li 7 La 3 Zr 2 O 12 garnets by in situ neutron diffraction

Doped Li 7 La 3 Zr 2 O 12 garnets, oxide-based solids with good Li + conductivity and compatibility, show great potential as leading electrolyte material candidates for all-solid-state lithium ion batteries. Still yet, the conductive bulk usually suffers from the presence of secondary phases and the transition towards a low-conductivity tetragonal phase during synthesis. Dopants are designed to stabilize the high-conductive cubic phase and suppress the formation of the low-conductivity phases. In situ neutron diffraction enables a direct observation of the doping effects by monitoring the phase evolutions during garnet synthesis. It reveals the reaction mechanism involving the temporary presence of intermediate phases. The off-stoichiometry due to the liquid Li 2 CO 3 evaporation leads to the residual of the low-conductivity intermediate phase in the as-synthesized bulk. Appropriate doping of an active element may alter the component of the intermediate phases and promote the completion of the reaction. While the dopants aid to stabilize most of the cubic phase, a small amount of tetragonal phase tends to form under a diffusion process. Lastly, the in situ observations provide the guideline of process optimization to suppress the formation of unwanted low-conductivity phases.

36 MATERIALS SCIENCE↗

Improving Charge Transport and Environmental Stability of Carbohydrate-Bearing Semiconducting Polymers in Organic Field-Effect Transistors

Semiconducting polymers offer synthetic tunability, good mechanical properties, and biocompatibility, enabling the development of soft technologies previously inaccessible. Side-chain engineering is a versatile approach for optimizing these semiconducting materials, but minor modifications can significantly impact material properties and device performance. Carbohydrate side chains have been previously introduced to improve the solubility of semiconducting polymers in greener solvents. Despite this achievement, these materials exhibit suboptimal performance and stability in field-effect transistors. In this work, structure–property relationships are explored to enhance the device performance of carbohydrate-bearing semiconducting polymers. Toward this objective, a series of isoindigo-based polymers with carbohydrate side chains of varied carbon-spacer lengths is developed. Material and device characterizations reveal the effects of side chain composition on solid-state packing and device performance. With this new design, charge mobility is improved by up to three orders of magnitude compared to the previous studies. Processing–property relationships are also established by modulating annealing conditions and evaluating device stability upon air exposure. Notably, incidental oxygen-doping effects lead to increased charge mobility after 10 days of exposure to ambient air, correlated with decreased contact resistance. Bias stress stability is also evaluated. This work highlights the importance of understanding structure–property relationships toward the optimization of device performance

36 MATERIALS SCIENCE↗

Study of ZnO and Mg doped ZnO nanoparticles by sol-gel process

Nano-crystalline undoped and Mg doped ZnO (Mg-ZnO) nanoparticles with compositional formula Mg{sub x}Zn{sub 1-x}O (x=0,1,3,5,7,10 and 12 %) were synthesized using sol-gel process. The XRD diffraction peaks match with the pattern of the standard hexagonal structure of ZnO that reveals the formation of hexagonal wurtzite structure in all samples. SEM images demonstrates clearly the formation of spherical ZnO nanoparticles, and change of the morphology of the nanoparticles with the concentration of the magnesium, which is in close agreement with that estimated by Scherer formula based on the XRD pattern. To investigate the doping effect on optical properties, the UV–VIS absorption spectra was obtained and the band gap of the samples calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Establishing charge-transfer excitons in 2D perovskite heterostructures

Charge-transfer excitons (CTEs) immensely enrich property-tuning capabilities of semiconducting materials. However, such concept has been remaining as unexplored topic within halide perovskite structures. Here, we report that CTEs can be effectively formed in heterostructured 2D perovskites prepared by mixing PEA 2 PbI 4 :PEA 2 SnI 4 , functioning as host and guest components. Remarkably, a broad emission can be demonstrated with quick formation of 3 ps but prolonged lifetime of ~0.5 μs. This broad PL presents the hypothesis of CTEs, verified by the exclusion of lattice distortion and doping effects through demonstrating double-layered PEA 2 PbI 4 /PEA 2 SnI 4 heterostructure when shearing-away PEA 2 SnI 4 film onto the surface of PEA 2 PbI 4 film by using hand-finger pressing method. The below-bandgap photocurrent indicates that CTEs are vital states formed at PEA 2 PbI 4 :PEA 2 SnI 4 interfaces in 2D perovskite heterostructures. Electroluminescence shows that CTEs can be directly formed with electrically injected carriers in perovskite LEDs. Clearly, the CTEs presents a new mechanism to advance the multifunctionalities in 2D perovskites.

36 MATERIALS SCIENCE↗

The effect of Ni doping on the mechanical behavior of tungsten

The effect of nickel (Ni) on activated sintering of tungsten has been known and investigated for decades. However, there are few reports on the mechanical properties of tungsten when Ni is added as a low alloying additive with less than 1 wt%. In this work, the mechanical behaviors of tungsten doped with 0.2–1.0 wt% nickel from room temperature up to 400 °C were investigated. The results show that the compression ductility of as-sintered Ni doped tungsten is drastically higher than that of as-sintered pure tungsten at all tested temperatures including room temperature, and the fracture toughness at room temperature is increased by 92%. The results suggest that the ductile-to-brittle transition temperature (DBTT) of tungsten can be reduced substantially by doping with Ni.

36 MATERIALS SCIENCE↗

The optimal co-doping of SrFe 1-x Co x O 3-δ oxygen carriers in redox applications

Although the oxygen carrier SrCoO 3 has higher redox activity than SrFeO 3 , cobalt is both more expensive and scarcer than iron, which would hinder the wide implementation of SrCoO 3 . For these reasons, doping SrFeO 3 with Co is a potential compromise, benefitting the redox properties of SrFeO 3 , while still limiting the overall amount of cobalt being used. In this work, to find the optimal level of Co-doping, density functional theory calculations were performed to investigate the Co-doping effect on the oxygen vacancy formation and oxygen migration in SrFe 1- x Co x O 3- δ ( x = 0, 0.125, 0.25, 0.375, 0.5). Our findings show that the oxygen vacancy formation energies ( E f ) decrease with the increase of Co content resulting from the increased composition of the O-2p band at the Fermi level upon Co doping. In particular, the E f decreases nearly 0.5 eV between the x = 0 and x = 0.25 samples while E f only decreases 0.1 eV further as Co content is increased to x = 0.5. We obtain that x = 0.25 is an optimal cost/benefit ratio for Co doping, which is preserved at both low oxygen vacancy concentrations ( δ = 0.0625 values listed above) and at high concentrations of δ = 0.1875 and 0.375. Kinetically, the oxygen migration barrier has slight change upon Co doping due to the similar size of Co and Fe. Therefore, considering both redox activity and economics in reversible oxygen storage applications, x = 0.25 is suggested as the optimal Co-doping value in SrFe 1- x Co x O 3- δ .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase Diagram and Magnetocaloric Effect of Mn{sub 2}Tb-Fe{sub 2}Tb System

Mn{sub 2}Tb-Fe{sub 2}Tb phase diagram was drawn, and the crystal structure and magnetocaloric effect of (Mn{sub 1-x}Fe{sub x}){sub 2}Tb (x ≤ 0.5) compounds at the Mn-rich side were systematically studied. X-ray diffraction demonstrates that all these Laves phase compounds crystallize in the cubic MgCu{sub 2}-type structure. The Rietveld results of XRD shows the cell volume increases with Fe content. The influence of doping effect in (Mn{sub 1-x}Fe{sub x}){sub 2}Tb (x ≤ 0.5) compounds on their magnetic and magnetocaloric properties for all solid solutions is presented. The Curie temperature (Tc) rises from 49 K (for x = 0.0) to 322 K (for x = 0.5), depending on Fe content significantly. Based on Landau’s theory, the magnetization behavior and magnetic transition were analyzed. The magnetocaloric effect (MCE) of (Mn{sub 1-x}Fe{sub x}){sub 2}Tb compounds is also discussed using the Maxwell relation, and the maximum magnetic entropy change (− ΔS{sub M}{sup Max}) approaches to 10 J kg{sup −1} K{sup −1} at x = 0 under a field ranging from 0 to 5 T. The best relative cooling power (RCP) reaches 535.03 J/kg (x = 0.1).

36 MATERIALS SCIENCE↗

Effects of La Doping and Zn or O Vacancy on the Magnetic Property of ZnO

Research on the magnetic origin and mechanism of La-doped ZnO system has been controversial. To solve this problem, we studied the effects of La doping and Zn or O vacancy on the magnetic property of ZnO using geometry optimization and energy calculation on the basis of first-principle generalized gradient approximation method of density functional theory. The electronic structures and magnetic properties of undoped ZnO, La-doped ZnO system, and systems with coexisting La doping and Zn or O vacancies were calculated. Results showed that the systems of La-doped ZnO and the coexistence of La doping and O vacancy are nonmagnetic. In addition, the system of La replacing Zn and one Zn vacancy exhibits long-range orderly ferromagnetism, and the Curie temperature of the doping system can achieve room temperature. The magnetism source of the systems with La doping and Zn vacancy coexisting in ZnO demonstrates strong hybrid coupling electron exchange effects existing among Zn-4s, Zn-3p, O-2p, and La-5s orbits that are nearest to the Zn vacancy. The next nearest distance between doping and Zn vacancy leads to the lowest formation energy and highest stability under the same doping condition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental verification of effects of barrier dopings on the internal electric fields and the band structure in InGaN/GaN light emitting diodes

We experimentally clarify the effects of barrier dopings on the polarization induced electric fields and the band structure in InGaN/GaN blue light emitting diodes. Both effects were independently verified by using electric field modulated reflectance and capacitance-voltage measurement. It is shown that the Si barrier doping does reduce the polarization induced electric field in the quantum wells. But the benefit of Si-doping is nullified by modification of the band structure and depletion process. With increased number of doped barriers, smaller number of quantum wells remains in the depletion region at the onset of the diffusion process, which can reduce the effective active volume and enhance the electron overflow.

36 MATERIALS SCIENCE↗

Electronic properties of phosphorene/graphene heterostructures: Effect of external electric field

We report the electronic properties of electrically gated heterostructures of black and blue phosphorene with graphene. The heterostructure of blue phosphorene with graphene is energetically more favorable than black phospherene/graphene. However, both are bonded by weak interlayer interactions. Graphene induces the Dirac cone character in both heterostructure which shows tunabilities with external electric field. It is found that Dirac cone get shifted depending on the polarity of external electric field that results into the so called self induced p-type or n-type doping effect. These features have importance in the fabrication of nano-electronic devices based on the phosphorene/graphene heterostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Sn Doping on the Crystallization Kinetics of Amorphous TlInS{sub 2} Films

The crystallization of amorphous Sn-doped TlInS{sub 2} films into three polymorphs has been studied by kinematic electron diffraction. The results demonstrate that the crystallization of 30-nm-thick amorphous films produced by thermal evaporation in high vacuum can be described by the Avrami–Kolmogorov equation: V{sub τ} = V{sub 0}[1–exp(–kτ{sup m})]. Kinematic electron diffraction patterns of the TlIn{sub 1–х}Sn{sub x}S{sub 2} films have been used to assess the effect of doping with Sn on the growth dimensionality and the activation energy for the crystallization of the amorphous films and the unit-cell parameters of the resultant crystalline materials. Doping extends the temperature range and effective activation energy for the crystallization of the amorphous films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microwaved assisted fast synthesis of n and p-doped Mg{sub 2}Si

Magnesium silicide based alloys fast syntheses have been carried out using microwave heating. Precursors were first ball milled powders together under inert gas. Resulting powders were then placed into a glassy carbon crucible before being heated by microwave irradiation. Sintering of the powder was performed by spark plasma method. XRD and SEM/EDS were used to investigate composition, structure and morphology. Thermoelectric performances of the samples were measured in the temperature range of 320–775 K. The doping effect of several elements such as silver, tin, antimony, cobalt and bismuth has been studied. n-Type and p-type Mg{sub 2}Si based materials have been successfully synthesized, with maximum ZT value up to 0.7 and 0.35 at 770 K for a n-type and a p-type sample, respectively. We demonstrate here that the use of microwave irradiation to prepare doped Mg{sub 2}Si is possible, and we discuss here the thermoelectric properties of such samples. - Schematic representation of microwave hybrid heating. - Highlights: • A promising method for fast production of Mg{sub 2}Si in the frame of heat harvesting applications is presented. • A novel technological approaches towards nanostructured materials is proposed. • Thermoelectric properties of Mg{sub 2}Si doped materials prepared under microwave irradiation are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗