Search NASA⌕ Search

SEARCH · Search NASA

Results for “E LAYER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Improving intrinsic oxygen reduction activity and stability: Atomic layer deposition preparation of platinum-titanium alloy catalysts

Improved activity and stability Pt-based catalysts for the oxygen reduction reaction (ORR) are needed to perpetuate the deployment of polymer electrolyte fuel cells (PEFCs) in the transportation sector. In this study, we use atomic layer deposition of TiO 2 and Pt coupled with thermal reductive annealing to prepare Pt 3 Ti electrocatalysts. The atomic level synthetic control resulted in Pt 3 Ti nanoparticles with high ORR performance, including a mass activity of 1.84 A/mg Pt and excellent electrochemical stability. The Pt 3 Ti nanoparticles show excellent specific activity — 5.3-fold higher than commercial Pt/C and 3-fold higher than polycrystalline Pt, exceeding the performance of any PtTi catalysts reported to date. Combined experimental and computational efforts indicate that Pt enrichment on the Pt 3 Ti enhances the activity, and the intrinsic stability of the Pt 3 Ti phase provides durability. Subsequently, this knowledge, along with the facile fabrication of alloys by atomic layer deposition, can be leveraged to designed improved performance catalysts.

25 ENERGY STORAGE↗
DOE OSTI2023

Deuterium supersaturated surface layer in tungsten: ion energy dependence

Abstract Properties of deuterium (D) supersaturated surface layers (DSSLs) formed in tungsten (W), such as thickness, internal microstructures, and D retention, are experimentally investigated as a function of the incident ion energy, E i . W samples were exposed to D plasmas in the PISCES-A linear plasma device in a range of E i ∼ 45–175 eV, while other plasma exposure parameters were fixed: sample temperature, T s , ∼423 K, ion flux, Γ i , ∼1.2 × 10 21 m −2 s −1 , and fluence, Φ i , ∼3.0 × 10 24 m −2 . High-resolution, cross-sectional, transmission electron microscopy observations confirm that (1) a DSSL forms even at the lowest E i ∼ 45 eV, (2) the DSSL thickness, Δ t DSSL , is found to decrease with decreasing E i from ∼11–12 nm at E i ∼ 175 eV to ∼5–6 nm at ∼45 eV, and to agree with approximately the maximum implantation depth calculated using SDTrimSP, and (3) high-density D nanobubbles with a diameter of ∼1 nm or less exist inside the DSSL, which is deemed to validate a theory-predicted vacancy stabilization process due to trapping of a solute D atom(s). Utilizing a D areal density of ∼4.2 × 10 19 m −2 in the first 14 nm from the surface at E i ∼ 75 eV from nuclear reaction analysis and the measured E i dependence of Δ t DSSL , our previous laser-induced breakdown spectroscopy data is updated: both dynamic and static D retention increase with decreasing E i , and the D/W atomic fraction during plasma exposure reaches ∼0.3 at E i ∼ 45 eV. A possible DSSL formation mechanism is proposed.

Physics↗
DOE OSTI2022

Anomalous Redox Features Induced by Strong Covalency in Layered NaTi 1-y V y S 2 Cathodes for Na-Ion Batteries

The rising demand for energy density of cathodes means the need to raise the voltage or capacity of cathodes. Transition metal (TM) doping has been employed to enhance the electrochemical properties in multiple aspects. The redox voltage of doped cathodes usually falls in between the voltage of undoped layered cathodes. However, in this study, we found anomalous redox features in NaTi 1-y V y S 2 . The first discharge platform potential (2.4 V) is significantly higher than that of undoped NaTiS 2 and NaVS 2 (both around 2.2 V), and the energy density is raised by 15%. We speculate that the anomalous voltage is mainly attributed to the strong hybridization in the Ti-V-S system. Ti 3+ and V 3+ undergo charge transfer and form a more stable Ti (t 2g 0 e g 0 ) and V (t 2g 3 e g 0 ) electronic configuration. Our results indicate that higher voltage of cathode materials could be achieved by strong TM-ligand covalency, and this conclusion provides possible opportunities to explore high voltage materials for future layered cathodes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

New heat flux model for non-axisymmetric divertor infrared structures

A convective heat flux model for perturbed plasmas, based on guiding center ion drift in vacuum elds (A. Wingen, et al., Phys. Plasmas 21 (2014) 012509), has been updated. The old model only considered ion heat flux, while here also electron heat flux is included. The updated model predicts divertor heat flux distributions in non-axisymmetric (3D) plasmas with applied Resonant Magnetic Perturbation (RMP) fields, and includes electric scalar potentials. It is found that a radial electric field in the near Scrape-o Layer (SOL) can considerably shift the footprints toroidally, leading to a smearing out eff ect of the incident heat flux, while a simple model for sheath potential has little impact on footprints. Various approaches to model electron heat flux are studied. A convective electron model, based on collisionless free streaming, is found to yield the best agreement with measurements, while a conductive model requires a at temperature gradient inside lobes to yield acceptable peak heat ux values. A heuristic heat flux layer approach, based on a fixed layer width also requires a limited heat flux inside the last closed flux surface (LCFS); by selecting various locations of the LCFS, the results of the conductive or convective model can be recovered respectively. The sum of ion and electron heat fluxes, both obtained by the convective model, is compared to experimental data for multiple time slices in DIII-D. Strike point splitting is observed with peak heat fluxes and layer widths that compare well to infrared camera (IR) measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Streaming in a Nuclear Grade Sandwich Composite for Microreactor Shielding

The NGSC is a new approach to develop a shield structure for microreactors which combines the biological shielding with the reactor pressure vessel. Six layers of SS316 skins and core materials are present in the NGSC, where the core materials are reduce the neutron and gamma dose. Previous work has examined how a simplified NGSC can be optimized for cost, dose, and weight. This work explored the inclusion of SS36 ribs, which helps maintain the structural integrity of the NGSC, affects the transportation of radiation through the NGSC. For B$_4$C layers, the addition of ribs reduces neutron absorption but increase photon absorption. For WB$_4$-cermet layers, the addition of ribs reduces neutron absorption and reduces photon absorption.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Dependence of scrape-off layer profiles and turbulence on gas fuelling in high density H-mode regimes in TCV

A set of high density, highly shaped H-mode discharges has been performed in the TCV tokamak with the aim of assessing the effects of increasing divertor neutral recycling on the properties of upstream inter-ELM scrape-off layer (SOL) profiles and transport. An increase of divertor neutral pressure has been correlated with the evolution of separatrix properties and turbulence level. The latter has been quantified by means of the α t parameter introduced in (Eich 2020 Nucl. Fusion 60 056016), describing the contribution of resistive-interchange turbulence in the SOL relative to drift wave transport. The analysis reveals a general broadening of the upstream SOL profiles as α t increases, with the SOL power width measured by the vertical IR thermography system increasing significantly. In a similar way, the upstream density profile widens in the near SOL, whereas in the far SOL a density shoulder is observed to progressively form and increase in amplitude. This behaviour is associated with an enhancement of far SOL turbulent transport in the form of blob-filaments travelling radially faster across the far SOL and becoming bigger at higher α t . Finally, the detected filaments, evaluated from the fast reciprocating probe at the outer midplane, are determined to mostly belong to the resistive ballooning and resistive X-point regimes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Observability of negative capacitance of a ferroelectric film: Theoretical predictions

Here, we theoretically explore mechanisms that can potentially give rise to the steady-state and transient negative capacitance in a uniaxial ferroelectric film stabilized by a dielectric layer. The analytical expressions for the steady-state capacitance of a single-domain and polydomain states are derived within the Landau-Ginzburg-Devonshire approach and used to study the state stability vs the domain splitting as a function of dielectric layer thickness. Analytical expressions for the critical thickness of the dielectric layer, polarization amplitude, equilibrium domain period, and susceptibility are obtained and corroborated by finite element modeling. Furthermore we explore the possible effects of nonlinear screening by two types of screening charges at the ferroelectric-dielectric interface and show that if at least one of the screening charges is very slow, the total polarization dynamics can exhibit complex time- and voltage-dependent behaviors that can be interpreted as an observable negative capacitance. In this setting, the transient negative capacitance effect is accompanied by almost zero dielectric susceptibility in a wide voltage range and low frequencies. These results may help to elucidate the observation of the transient negative capacitance in thin ferroelectric films, and identify materials systems that can give rise to the behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

HFTS-1 Natural Joint Data and Engineering Summary

This report provides an analysis of engineering and geologic data collected from the Hydraulic Fracturing Test Site #1 (HTSF-1) project in the southern Midland Basin, Reagan County, Texas. The site is being studied as part of the Science-informed Machine Learning for Accelerating Real-Time Decisions in Subsurface Applications (SMART) Initiative at the National Energy Technology Laboratory (NETL). The data collected is intended to provide a basis of understanding of the site and to construct simulation models. This report provides a summary analysis of the engineering and geologic data collected from the project to provide a basis of understanding of the site and to construct simulation models. The report examines various possible correlations in engineering properties based on natural fracture data from the program, which consisted of 11 horizontal wells, one vertical well, and one slant well. The horizontal wells are in two horizons: 1) Upper and 2) Middle Wolfcamp formations. Program data include: fracture frequency and fracture orientation data from four core runs in a slant well; fracture spacing and orientation from a vertical pilot well; laboratory triaxial testing and mineralogical determinations; and porosity results from magnetic resonance analyses from various wells, together with observations based on the data collection. In addition, available references were reviewed on the site for additional insights. As the focus of the report is on the natural system, hydraulic fracture data from the site were not examined in detail in this report. Data variability is the chief observation in examination of the database. Fracture frequency in the slant well can range from sections with values as high as five fractures per ft to sections up to 100+ ft in length with no natural observed fractures. Fracture spacing across is typically less than 10 ft, but can range up to hundreds of feet. Apparent fracturing shows the trends in two predominate orientations, E-SW and WNW-ESE, but minor variations exist. The rock units vary across the site from siliceous mudstones to calcareous mudstones, showing a general layering with depth. The laboratory properties such as strength and modulus show no apparent trend with depth, but appear to correlate with rock mineralogy with high strength and modulus values where calcium content is high. In addition, an attempt to examine variability and mineralogy on a larger scale was made using a color-coded system based on gamma ray measurements. A staged colored approach was adopted, presuming that lower gamma ray values indicate higher value of calcium content (blue scale) and that higher gamma ray values indicate higher clay mineral content (orange scale). As provided in report appendices, the system correlated well with visual examination of the slant core and the petrofabric analyses of the vertical pilot well. The results showed large variability in mineral content along the horizontal plane across the site. The change in mineral content was also rapid, on a scale less than that of the average hydraulic fracture stage length of about 180 ft.

42 ENGINEERING↗
DOE OSTI2024

Additive manufacturing of hierarchical three- dimensional micro-architected aerogels

Disclosed here is a method for making a three-dimensional micro-architected aerogel, comprising: (a) curing a reaction mixture comprising a co-sol-gel material (e.g., graphene oxide (GO)) and at least one catalyst to obtain a crosslinked co-sol-gel (e.g., GO hydrogel); (b) providing a photoresin comprising a solvent, a photoinitiator, a crosslinkable polymer precursor, and a dispersion of the crosslinked co-sol-gel (e.g., GO hydrogel); (c) curing the photoresin using projection microstereolithography layer-by-layer to produce a wet gel having a pre-designed three-dimensional structure; (d) drying the wet gel to produce a dry gel; and (e) pyrolyzing the dry gel to produce a three-dimensional micro-architected aerogel (e.g., graphene aerogel). Also disclosed is a photoresin for projection microstereolithography, comprising a solvent, a photoinitiator, a crosslinkable polymer precursor, and a dispersion of a crosslinked co-sol-gel.

Worsley, Marcus A.↗
DOE OSTI2024

Precision Measurements of the Neutron Magnetic Form Factor to High Momentum Transfer using Durand's Method

Protons and neutrons, collectively known as nucleons, along with electrons, constitute the funda- mental building blocks of the visible universe. Understanding their internal structure is crucial for addressing key scientific questions about our origin and existence. Elastic electron-nucleon scatter- ing provides insights into the spatial distributions of charge and current within nucleons through their electromagnetic form factors. Accurate knowledge of these form factors over a broad range of Q2, the squared four-momentum transfer in the scattering process, reveals details about the nucleon’s internal structure. However, high-Q2 data of the nucleon electromagnetic form factor is scarce due to the challenges associated with such measurements. This thesis reports preliminary results from high-precision measurements of the neutron magnetic form factor (Gn M ) to unprecedented Q2 using Durand’s method, also known as the “ratio” method. Systematic errors are greatly reduced by extracting Gn M from the ratio of neutron-coincident (D(e, e'n)) to proton-coincident (D(e, e'p)) quasi-elastic electron scattering from deuteron. The scattered electrons were detected in the BigBite spectrometer, which features multiple Gas Elec- tron Multiplier (GEM) layers with large active area for high-precision tracking at very high rates. Simultaneous nucleon detection was performed by the Super BigBite spectrometer, which utilizes a dipole magnet with large solid angle acceptance at forward angles and a novel hadron calorimeter with very high and comparable detection efficiencies for both protons and neutrons. This setup could handle very high luminosity, making high-Q2 measurements feasible. Data were collected at five Q2 points: 3, 4.5, 7.4, 9.9, and 13.6 (GeV/c)2. Preliminary results are reported for all, with the lowest two Q2 points in good agreement with existing world data, while the higher points significantly extend the Q2 range in which Gn M is known accurately. The precision of the highest Q2 point is expected to remain unmatched for years to come.

Datta, Provakar↗
DOE OSTI2024

Experimental observations of bifurcated power decay lengths in the near Scrape-Off Layer of ST40 High Field Spherical Tokamak

The scrape-off layer parallel heat flux decay lengths measured at ST40, a high field, low aspect ratio spherical tokamak, have been observed to bifurcate into two groups. The wide group follows established H-mode scalings (ranging between 2 to 8 mm) while the narrow group falls up to 10 times below these scalings (between 0.2 and 0.8 mm), being comparable to the ion total Larmor radius rather than the ion poloidal Larmor radius. The heat flux profiles of the latter group can only be described by a multi-exponential function, rather than the single exponential function convoluted with a Gaussian. The onset of the narrow scrape-off layer width is observed to be associated with suppressed magnetic fluctuations, suggesting reduced electromagnetic turbulence levels in the SOL.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Role of Polysulfide Anions in Solid-Electrolyte Interphase Formation at the Lithium Metal Surface in Li–S Batteries

Delineating intricate interactions between highly reactive Li-metal electrodes and the diverse constituents of battery electrolytes has been a long-standing scientific challenge in materials design for advanced energy storage devices. Here, we isolated lithium polysulfide anions (LiS 4 - ) from an electrolyte solution based on their mass-to-charge ratio and deposited them on Li-metal electrodes under clean vacuum conditions using ion soft landing (ISL), a highly controlled interface preparation technique. The molecular level precision in the construction of these model interfaces with ISL, coupled with in situ x-ray photoelectron spectroscopy and ab initio theoretical calculations, allowed us to obtain unprecedented insight into the parasitic reactions of well-defined polysulfides on Li-metal electrodes. Our study reveals that the oxide-rich surface layer, which is amenable to direct electron exchange, drives multielectron sulfur oxidation (S o → S 6+ ) processes. Furthermore, our results have substantial implications for the rational design of future Li-S batteries with improved efficiency and durability.

25 ENERGY STORAGE↗
DOE OSTI2021

Mapping Conductance and Switching Behavior of Graphene Devices In Situ

Graphene is proposed for use in various nanodevice designs, many of which harness emergent quantum properties for device functionality. However, visualization, measurement, and manipulation become nontrivial at nanometer and atomic scales, representing a significant challenge for device fabrication, characterization, and optimization at length scales where quantum effects emerge. Herein, proof of principle results at the crossroads between 2D nanoelectronic devices, e-beam-induced modulation, and imaging with secondary electron e-beam induced currents (SEEBIC) is presented. A device platform compatible with scanning transmission electron microscopy investigations is introduced. Then how the SEEBIC imaging technique can be used to visualize conductance and connectivity in single layer graphene nanodevices, even while supported on a thicker substrate (conditions under which conventional imaging fails) is shown. Finally, it is shown that the SEEBIC imaging technique can detect subtle differences in charge transport through time in nonohmic graphene nanoconstrictions indicating the potential to reveal dynamic electronic processes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A general mechanism for gel layer formation on borosilicate glass under aqueous corrosion

Mineral and glass dissolution is a scientific topic deeply investigated but incompletely understood and of a great interest for the geochemical and materials science communities. If the interfacial dissolution/reprecipitation mechanism seems to be applicable to most of silicate minerals, the debate remains open concerning glass. Here we studied two model glasses, a ternary borosilicate (CJ1) and the same glass doped with 4.1 mol% of Al2O3 (CJ2). The two glasses were altered at 90°C, pH 9, and in conditions far and close to saturation with respect to amorphous silica, to determine the initial and residual rates. Moreover, a specific experiment was conducted for a short duration with a solution highly enriched with 18O and 29Si isotopes to understand how passivating gels form. SEM, TEM and ToF-SIMS characterization, along with Monte Carlo simulations were used to understand the rate limiting reactions at play and infer the role of Al. We show that Al yields a slower matrix dissolution in dilute conditions. However, it slows down he formation and the maturation of the passivating gel and favors alteration by partial hydrolysis of Si and Al entities followed by in-situ reorganization/relaxation into a porous network. Unexpectedly, CJ1 experienced both interfacial dissolution/reprecipitation and partial hydrolysis followed by in situ reorganization of the silicate network during the course of a single experiment. This study offers a unified concept that can pave the way for the future development of a predictive kinetic model based on a detailed description of bond breaking and bond forming as a function of glass composition and alteration conditions.

Gin, Stephane↗
DOE OSTI2026

Impact of toroidal magnetic field direction on integrated ELM-stable operation and divertor power exhaust via boron powder injection in EAST

We report the first in-depth comparison of the impact of toroidal magnetic field direction on solid boron injection used for Edge-Localized Mode (ELM) control, power exhaust, and core high-Z impurity control in the Experimental Advanced Superconducting Tokamak. With favorable ion ∇B drift towards the upper X-point in an upper-single-null configuration, boron injection effectively suppresses ELMs, produces a detachment of the inner divertor target, and leads to improved energy confinement. ELM suppression in this configuration is accompanied by the excitation of an Edge Harmonic Mode. In contrast, with unfavorable ion ∇B drift away from the upper X-point, boron injection also suppresses ELMs but leads to a more symmetric detachment state of both the inner and outer divertor targets, while plasma energy confinement is slightly degraded despite similar boron injection levels; a different low-frequency coherent mode without multiple harmonics is observed. Measurements from toroidally separated views show that the divertor response to boron injection is essentially toroidally symmetric, supporting the use of two-dimensional SOLPS-ITER modeling with a toroidally uniform impurity source. These experimental observations are qualitatively consistent with SOLPS-ITER simulations, which highlight the critical role of E × B drift effects in setting the Bt-dependent in–out asymmetry of detachment and in asymmetrically transporting particles and injected impurities within the scrape-off layer and private-flux region. These findings underscore the importance of drift physics and real-time wall conditioning in controlling low-Z impurity transport and optimizing edge solutions for integrated, ELM-stable, high-performance tokamak operation.

E × B drift↗