Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRON RECOMBINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Constraints on Titan's ionosphere

The near flyby of Saturn's moon Titan by Voyager 1 revealed a Venus-like interaction between the moon and Saturn's magnetospheric plasma. Although neither the radio science experiment occultation observation nor the in-situ measurements directly detected the ionosphere, plasma of ionospheric origin was observed as Voyager 1 passed through Titan's wake. Balancing the magnetic pressure in this low-beta region of Saturn's magnetosphere with ionospheric particle pressure yields an upper limit on the ionospheric density. Using an ionospheric temperature equal to the exospheric temperature of 200 K yields a charge density of about 3000/cu cm, which is consistent with the peak ionospheric electron density inferred from a balance of electron impact ionization of molecular nitrogen and recombination loss. Both of these quantities are consistent with limits derived from Voyager 1 observations. Good constraints on these quantities are important in planning the Cassini mission to orbit Saturn and probe Titan's ionosphere and atmosphere at the beginning of the next century.

Mcnutt, Ralph L., Jr.↗

Spectral diagnostics from X-ray to radio wavelengths

A spectral diagnostic is defined as an observable spectral quantity that can be used to measure a physical parameter characterizing the observed plasma. The first step in establishing a spectral line is to determine whether the upper state of the transition is excited primarily by collisions (typically by electrons), by a radiative process, or by recombination (either direct or cascade). The ultraviolet portion of the spectrum is emphasized as it is well studied, the background photospheric continuum is weak for cool stars, and the spectrum consists of an interesting mix of lines formed by all three mechanisms.

Linsky, Jeffrey L.↗

Making Ultrathin Solar Cells

Process produces extremely thin silicon solar cells - only 50 micrometers or less in thickness. Electrons and holes have less opportunity to recombine before collected at cell surfaces. Efficiency higher and because volume of silicon small, less chance of radiation damage in new cells. Initial steps carried out at normal thickness to reduce breakage and avoid extra cost of special handling. Cells then thinned mechanically and chemically. Final cell includes reflective layer on back surface. Layer bounces unabsorbed light back into bulk silicon so it absorbs and produces useful electrical output.

Cogan, George W.↗

Detection of CO Cameron band emission in comet P/Hartley 2 (1991 XV) with the Hubble Space Telescope

Ultraviolet (UV) spectra of comet P/Hartley 2 (1991 XV) taken with the Faint Object Spectrograph (FOS) on the Hubble Space Telescope (HST) in 1991 September reveal several bands of the Cameron system of CO (a 3 Pi-X 1 Sigma). These band are most likely due to 'prompt' emission from CO2 and, thus, provide a direct tracer of the CO2 abundance in the nucleus. Photodissociative excitation of CO2 is probably the largest contributor to the Cameron band emission, but significant contributions from electron impact excitation of CO, electron impact dissociation of CO2, and dissociative recombination of CO2(+), are also possible. Using our estimate that photodissociative excitation is responsible for approximately 60% of the total excitation of the Cameron system, we derive Q(sub CO2) approximately 2.6 x 10(exp 27) molecules/s, which implies CO2/H20 approximately 4%. If all of the Cameron band emission is due to photodissociative excitation, then CO2/H2O = 7 +/- 2%. For the largest possible contributions from the other excitation mechanisms considered, the CO2 abundance could be as a small as aproximately 2-3%. We did not detect CO Fourth Positive Group emission in our data and derive an upper limit of CO/H2O less than or equal to 1% (3 sigma) for CO coming directly from the nucleus. Comparison of the relative CO2 and CO abundances in P/Hartley 2 to those in P/Halley (CO2/H2O approximately 3%-4%, CO/H20 approximately 4% for the nucleus source) indicates that selective devolatilization of the nucleus may have occurred for P/Hartley 2. A relatively large CO2/CO ratio (i.e., approximately greater than 1) seems to be a common property of cometary nuclei. Since gas phase chemistry, in either the solar nebula or the interstellar medium (ISM), appears incapable of producing large relative CO2 abundances, the CO2 in cometary nuclei is probably produced either by UV and/or cosmic ray irradiation of ISM grains prior to the formation of the Solar System, or by condensation fractionation in the solar nebula.

Weaver, H. A.↗

Atomic Data Needs for X-Ray Astronomy

This publication contains written versions of most of the invited talks presented at the workshop on Atomic Data Needs for X-ray Astronomy which was held at NASA's Goddard Space Flight Center on December 16-1 7 1999. The idea of hosting such a workshop emerged from an imminent need to update and complete current atomic datasets in anticipation of a new era of high quality X-ray spectra starting with the launching of Chandra and XMM-Newton observatories. At first, our vision of the workshop was of a short and limited attendance event, given the specialization of the topic. But it, was soon realized, from the response to the first workshop announcement, that the topic was of much interest, to researchers working in X-ray spectra (physicists and astronomers). As a result, the workshop grew to approximately 120 participants from several countries. The kind of atomic data that interests us are those parameters needed for analysis and modeling of spectra shortward of about about 100 A and relevant to ionic species of astronomical interest. The physical mechanisms of interest in the formation of spectra include photoionization. collisional ionization, recombination (radiative and dielectronic). collisional excitation (by electrons and protons). and radiative deexcitation. Unique to X-ray spectroscopy are the ionization and excitation processes from inner-closed shells. in addition to the challenges in interpret,ing the medium resolution (epsilon/delta epsilon is about 0.05 - 0.1) data obtained by current X-ray astronomy experiments. Line wavelengths are of interest too, particularly owing to the high resolution spectra from the new experiments. The workshop was divided into five major areas: Observational Spectroscopy, Theoretical Calculations of Atomic Data, Laboratory Measurements of Atomic Parameters. Spectra Modeling, and Atomic Databases. One comforting finding from the work shop is that the enthusiasm felt by X-ray astronomers about the new observational missions seems to be shared by theoretical and experimental physicists. Talks were presented about several exciting new projects and experimental and theoretical techniques devoted to X-ray spectroscopy. Simultaneously, several new tools for spectral analysis and modeling have recently been developed, together with improved atomic databases. These proceeding are expected to be of interests to producers and users of atomic data. Moreover. the contributions presented here have been written in a way that can be used by a general audience of scientists and graduate students in X-ray astronomy, modelling, and in computational and experimental atomic physics.

Kallman, Timothy↗

A Global Atmospheric Model of Meteoric Iron

The first global model of meteoric iron in the atmosphere (WACCM-Fe) has been developed by combining three components: the Whole Atmosphere Community Climate Model (WACCM), a description of the neutral and ion-molecule chemistry of iron in the mesosphere and lower thermosphere (MLT), and a treatment of the injection of meteoric constituents into the atmosphere. The iron chemistry treats seven neutral and four ionized iron containing species with 30 neutral and ion-molecule reactions. The meteoric input function (MIF), which describes the injection of Fe as a function of height, latitude, and day, is precalculated from an astronomical model coupled to a chemical meteoric ablation model (CABMOD). This newly developed WACCM-Fe model has been evaluated against a number of available ground-based lidar observations and performs well in simulating the mesospheric atomic Fe layer. The model reproduces the strong positive correlation of temperature and Fe density around the Fe layer peak and the large anticorrelation around 100 km. The diurnal tide has a significant effect in the middle of the layer, and the model also captures well the observed seasonal variations. However, the model overestimates the peak Fe+ concentration compared with the limited rocket-borne mass spectrometer data available, although good agreement on the ion layer underside can be obtained by adjusting the rate coefficients for dissociative recombination of Fe-molecular ions with electrons. Sensitivity experiments with the same chemistry in a 1-D model are used to highlight significant remaining uncertainties in reaction rate coefficients, and to explore the dependence of the total Fe abundance on the MIF and rate of vertical transport.

meteoric inputfunction↗

Measurement of electrical parameters and current components in the bulk of silicon solar cells

A review and illustration of electrical measurements for determination of the bulk parameters in silicon solar cells is given. The presentation concentrates on transient and small signal admittance measurements. These measurements yield accurate and reliable values of the base lifetime and the surface recombination velocity at the back contract without inaccuracies that normally results from electrons and holes in the p/n junction space charge region. This then allows the determination of the recombination current in each region of the cell. As an example, current components in the emitter, low doped base, high doped base and junction space charge region of the back surface field cell are obtained. Such analysis is essential in determining the relative importance of the base and the emitter and, thus, the region that limits the cell efficiency.

Neugroschel, A.↗

The electron Boltzmann equation in a plasma generated by fission fragments

A Boltzmann equation formulation is presented for the determination of the electron distribution function in a plasma generated by fission fragments. The formulation takes into consideration ambipolar diffusion, elastic and inelastic collisions, recombination and ionization, and allows for the fact that the primary electrons are not monoenergetic. Calculations for He in a tube coated with fissionable material show that, over a wide pressure and neutron flux range, the distribution function is non-Maxwellian, but the electrons are essentially thermal. Moreover, about a third of the energy of the primary electrons is transferred into the inelastic levels of He. This fraction of energy transfer is almost independent of pressure and neutron flux but increases sharply in the presence of a sustainer electric field.

Hassan, H. A.↗

Electron distribution function in a plasma generated by fission fragments

A Boltzmann equation formulation is presented for the determination of the electron distribution function in a plasma generated by fission fragments. The formulation takes into consideration ambipolar diffusion, elastic and inelastic collisions, recombination and ionization, and allows for the fact that the primary electrons are not monoenergetic. Calculations for He in a tube coated with fissionable material shows that, over a wide pressure and neutron flux range, the distribution function is non-Maxwellian, but the electrons are essentially thermal. Moreover, about a third of the energy of the primary electrons is transferred into the inelastic levels of He. This fraction of energy transfer is almost independent of pressure and neutron flux.

Hassan, H. A.↗

Surface recombination velocity measurement for silicon solar cells

For the design and fabrication of silicon solar cells approaching theoretical ultimate conversion efficiencies, surface recombination velocity plays a crucial role. A technique using a scanning electron microscope with pulsed electron beam has been developed for thy measurement of this important parameter for silicon surfaces. It is shown that the surface recombination velocity(s) increases by an order of magnitude when a freshly etched sample is left out for a few hours, presumably due to generation of surface states. A textured front surface field (FSF) cell with a high-low junction near the surface shows the effect of minority carrier reflection and an apparent reduction of s, whereas a tandem junction (TJ) cell with n+-p junction near the surface gives larger s value.

Daud, T.↗

High-efficiency graded band-gap Al/x/Ga/1-x/As-GaAs solar cell

A detailed theoretical analysis of an n-on-p graded band-gap Al(x)Ga(1-x)As-GaAs solar cell yields a maximum air mass zero power conversion efficiency of 17% compared to 9% for a similar GaAs cell. The analysis includes surface and bulk minority carrier recombination, junction recombination current, spectrally varying surface reflection, and series resistance loss. The maximum efficiency is determined for a surface recombination velocity of 10,000 cm/sec and hole and electron diffusion lengths of 2.1 and 7.6 microns, respectively. The improved efficiency is primarily due to a built-in electric field, caused by the band-gap gradation, accelerating photogenerated holes toward the p-n junction. This field reduces the surface and bulk recombination of the holes, and thereby enhances their collection.

Hutchby, J. A.↗

The excitation and collisional deactivation of metastable N/2P/ atoms in auroras

The concentration and altitude distribution of metastable N(2P) atoms was measured in a diffuse IBC II(+) auroral arc. The dominant N(2P) source is shown to be the dissociative excitation of N2 by electron impact with a minor contribution from the dissociative recombination of N2(+) ions. The possibility that an ion-molecule process involving atomic oxygen and vibrationally excited N2(+) ions is a significant N(2P) source is examined. Values for the proportional yield of N(+), N(2P), N(2D), and N(4S) atoms from electron-impact dissociation of N2 under optically thick conditions are given.

Zipf, E. C.↗

Development of a Method for Local Electron Temperature and Density Measurements in the Divertor of the JET Tokamak

Plasma volume recombination in the divertor, a process in which charged particles recombine to neutral atoms, contributes to plasma detachment and hence cooling at the divertor target region. Detachment has been observed at JET and other tokamaks and is known to occur at low electron temperatures (T(sub e)<1 eV) and at high electron density (n(sub e)>10(exp 20)/m(exp 3)). The ability to measure such low temperatures is therefore of interest for modelling the divertor. In present work we report development of a new spectroscopic technique for investigation of local electron density (n(sub e)) and temperature (T,) in the outer divertor at JET.

Jupen, C.↗

Study of Luminescence Characteristics of Trivalent Terbium in Silicate Glass

An important use of silicate glasses doped with terbium oxide (Tb2O3) is their use as fiber optic sensors for high-resolution imaging applications requiring the detection of x-rays (e.g. tomography and radiography). The x-ray radiation is absorbed by the glass, producing electron-hole pairs (excitons). The excitons migrate through the glass matrix and then recombine, emitting characteristic Tb(3+) luminescence in the optical wavelength region. This emission is due to forbidden transitions of 4f electrons and therefore has a long decay time. Long decay time is undesirable when imaging transient events since it results in blurring in time of the images. It has been reported elsewhere that in crystals Tb(3+) ions can act both as luminescence centers and as fluorescence traps. These traps can capture excitons and delay their recombination. This delayed fluorescence is seen as a long lived, secondary component to the luminescence decay curve, or afterglow. Such a secondary decay component to the luminescence decay of Tb(3+) has been observed before in soda glass following pulsed optical excitation. In order to determine the conditions under which afterglow occurs, an understanding of the material's luminescent properties is required.

West, Mike S.↗

Products of Dissociative Recombination in the Ionosphere

SRI International undertook a novel experimental measurement of the product states formed by dissociative recombination (DR) of O2(+), NO(+), and N2(+) as a function of both electron energy and reactant ion vibrational level. For these measurements we used a recently developed experimental technique for measuring dissociation product distributions that allows both the branching ratios to be accurately determined and the electronic and rovibrational state composition of the reactant ions to be specified. DR is the dominant electron loss mechanism in all regions of the ionosphere. In this process, electron attachment to the molecular ion produces an unstable neutral molecule that rapidly dissociates. For a molecular ion such as O2(+), the dissociation recombination reaction is (1) O2(+) + e yields O + O + W. The atomic products of this reaction, in this case two oxygen atoms, can be produced in a variety of excited states and with a variety of kinetic energies, as represented by W in Eq. (1). These atoms are not only active in the neutral chemistry of the ionosphere, but are also especially important because their optical emissions are often used to infer in situ concentrations of the parent molecular ion and ambient electron densities. Many laboratory measurements have been made of DR reaction rates under a wide range of electron temperatures, but very little is known about the actual distributions among the final states of the atomic products. This lack of knowledge seriously limits the validity and effectiveness of efforts to model both natural and man-made ionospheric disturbances. Bates recently identified major deficiencies in the currently accepted branching ratios for O2(+) as they relate to blue and green line emission measurements in the nocturnal F-region. During our two-year effort, we partially satisfied our ambitious goals. We constructed and operated a variable pressure, electron-impact ion source and a high pressure, hollow-cathode discharge ion source for O2(+), NO(+), and N2(+) beams. Translational spectroscopy of the products of dissociative charge transfer in Cs vapor was used to accurately assay the composition of the O2(+) and NO(+) beams and to develop a methodology for the vibrationally controlled preparation of the ground state ion beams. Attempts to assay the N2(+) beam revealed a novel two-electron process in the charge transfer reactions. A coaxial electron gun for the DR measurements was constructed following an extensive numerical design of the fields. Tests of the gun, however, found substantial perturbations of the magnetic fields by the soft iron (CMI-C) assembly containing the Langmuir probe that locates the electron beam. Hydrogen annealing of the iron failed to eliminate the field perturbations, necessitating the removal of the probe assembly. During this work on the coaxial electron gun, we discovered that predissociated high Rydberg states of O2 could be produced by subjecting the molecules to a sudden perturbation by an electromagnetic field. This technique allowed a measurement of the product branching to the atomic limits for the lowest seven vibrational levels of O2(+).

Cosby, Philip↗

The temperature of intergalactic matter.

Intergalactic matter temperature parameters such as heating by cosmic ray ionization, dissipation of hydrodynamic turbulence, inelastic electron collision with H, He and He-ions

INTERGALACTIC MEDIUM↗