Search NASA⌕ Search

SEARCH · Search NASA

Results for “EXAFS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Iron and Arsenic Speciation During As(III) Oxidation by Manganese Oxides in the Presence of Fe(II): Molecular-Level Characterization Using XAFS, Mössbauer, and TEM Analysis

The redox state and speciation of the metalloid arsenic (As) determine its toxicity and mobility. Knowledge of biogeochemical processes influencing the As redox state is therefore important to understand and predict its environmental behavior. Many previous studies examined As(III) oxidation by various Mn-oxides, but little is known concerning environmental influences (e.g., coexisting ions) on the process. As such, in this study we investigated the mechanisms of As(III) oxidation by a poorly crystalline hexagonal birnessite (δ-MnO 2 ) in the presence of dissolved Fe(II) using X-ray absorption spectroscopy, Mössbauer spectroscopy, and transmission electron microscopy (TEM) coupled with energy-dispersive X-ray spectroscopy (EDS). The As K-edge X-ray absorption near edge spectroscopy (XANES) analysis revealed that, at low Fe(II) concentration (100 μM), As(V) was the predominant As species on the solid phase, whereas at higher Fe(II) concentrations (200–1000 μM), both As(III) and As(V) were sorbed on the solid phase. As K-edge extended X-ray absorption fine structure spectroscopy (EXAFS) analysis showed an increasing As–Mn/Fe distance over time, indicating As prefers to bind with the newly formed Fe(III)-(hydr)oxides. Both As(III) and (V) adsorbed on Fe(III)-(hydr)oxides as a bidentate binuclear corner-sharing complex. Both Mössbauer and TEM-EDS investigations demonstrated that oxidized Fe(III) products formed during Fe(II) oxidation by δ-MnO 2 were predominantly ferrihydrite-, goethite-, and ferric arsenate-like compounds. However, Fe EXAFS analysis also suggested the formation of a small amount of lepidocrocite. The Mn K-edge XANES data indicated that As(III) oxidation occurs as a two electron transfer with δ-MnO 2 and that the observed Mn(III) is due to conproportionation of surface-sorbed Mn(II) with Mn(IV) in the δ-MnO 2 structure. This study reveals that the mechanisms of As(III) oxidation by δ-MnO 2 in the presence of Fe(II) are very complex, involving many simultaneous reactions, and the formation of Fe(III)-(hydr)oxides plays a very important role in reducing As mobility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Origin of the enhanced Nb3Sn performance by combined Hf and Ta doping

Abstract In recent years there has been an increasing effort in improving the performance of Nb 3 Sn for high-field applications, in particular for the fabrication of conductors suitable for the realization of the Future Circular Collider (FCC) at CERN. This challenging task has led to the investigation of new routes to advance the high-field pinning properties, the irreversibility and the upper critical fields ( H Irr and H c2 , respectively). The effect of hafnium addition to the standard Nb-4Ta alloy has been recently demonstrated to be particularly promising and, in this paper, we investigate the origins of the observed improvements of the superconducting properties. Electron microscopy, Extended X-ray Absorption Fine Structure Spectroscopy (EXAFS) and Atom Probe Tomography (APT) characterization clearly show that, in presence of oxygen, both fine Nb 3 Sn grains and HfO 2 nanoparticles form. Although EXAFS is unable to detect significant amounts of Hf in the A15 structure, APT does indeed reveal some residual intragrain metallic Hf. To investigate the layer properties in more detail, we created a microbridge from a thin lamella extracted by Focused Ion Beam (FIB) and measured the transport properties of Ta-Hf-doped Nb 3 Sn. H c2 (0) is enhanced to 30.8 T by the introduction of Hf, ~ 1 T higher than those of only Ta-doped Nb 3 Sn, and, even more importantly the position of the pinning force maximum exceeds 6 T, against the typical ~ 4.5–4.7 T of the only Ta-doped material. These results show that the improvements generated by Hf addition can significantly enhance the high-field performance, bringing Nb 3 Sn closer to the requirements necessary for FCC realization.

36 MATERIALS SCIENCE↗

The Coordination Chemistry and Stoichiometry of Extracted Diglycolamide Complexes of Lanthanides in Extraction Chromatography Materials

Industrial rare earth element (REE) separations predominantly utilize solvent extraction processes tailored toward conventional resources such as bastnäsite, monazite, and ion adsorption clays. Advances in diglycolamide (DGA) chemistry have shown effective extraction characteristics for REE separations. However, limitations associated with traditional DGA solvent extraction techniques, such as third-phase formation and gelling, have hindered commercial viability. By supporting DGA extractants on porous resins such as polystyrene divinyl benzene (PS-DVB), the desirable combination of solvent extraction selectivity and ease of operation of sorbent columns can be achieved. To design a low-cost model for such solid-supported DGAs, extraction characteristics as influenced by the underlying coordination chemistry must be explored to achieve efficient functional systems. Within this study, we report novel DGA resin materials, each incorporating one of the DGAs N,N,N’,N’-tetra-(1-octyl)-3-oxapentane-1,5-diamide (TODGA), N,N'-dimethyl-N,N'-dioctyl-3-oxapentane-1,5-diamide (DMDODGA), and 2,2'-oxybis(1-(3-(((2-ethylhexyl)thio)methyl)-4-methylpyrrolidin-1-yl)ethan-1-one) (DEHPDGA). The affinity of DGAs across the lanthanide (Ln) series was evaluated for both hydrochloric acid and nitric acid media with varying Ln feed concentrations to study distribution ratios and loading characteristics. Focusing on dysprosium, extended X-Ray Absorption Fine Structure (EXAFS) and density functional theory (DFT) calculations were also utilized to explore coordination chemistry and their effects on ligand performance. The general trend for both acid media resulted in DMDODGA having the highest extraction strength of all three DGAs at varying acid concentrations. Coordination-chemistry analysis supported by loading data, DFT calculations, and EXAFS results under forced loading conditions posited less than the expected 3:1 ligand-to-metal coordination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The FEFF code

FEFF is a real-space multiple-scattering Green’s function code for simulating a variety of X-ray spectroscopies as well as ground-state and excited-state electronic structure. It is perhaps best known for its use in extended X-ray absorption fine-structure (EXAFS) calculations, particularly within various analysis codes such as DEMETER and LARCH. In addition to EXAFS, FEFF can also be used to calculate X-ray absorption near-edge structure (XANES), X-ray emission spectroscopy (XES), electron energy loss spectra (EELS) and many other spectroscopic quantities. Here, the basic approach used for the calculations is described, focusing on the most important approximations and aspects of the simulations. Here, the capabilities of the FEFF code, including those of the Java-based graphical user interface JFEFF, are also briefly described.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing disorder in high-pressure cubic tin (IV) oxide: a combined x-ray diffraction and absorption study

The transparent conducting oxide, SnO2, shows promise as an optoelectronic material, with predicted tailorable properties through pressuremediated band gap opening. While such electronic properties are typically modeled assuming perfect ordering, this work employs extended x-ray absorption fine structure (EXAFS) spectroscopy to probe anion disordering. We present high-pressure cubic (Pa3) SnO2 at 44.5GPa thoroughly annealed with direct CO2 laser heating, and extract Sn–O distances from EXAFS to reveal a high degree of disorder in O positions. This observation is in contrast with x-ray diffraction (XRD), which suggest a high degree of order. The use of CO2 laser heating allows for direct observations of displacement of light anions in a sample that is without anisotropic strain.

diamond anvil cell↗

X-ray absorption spectroscopy of lanmodulin-derived peptides bound to rare earth elements

A sustainable and robust supply chain of rare earth elements (REEs) is necessary to meet our consumer, national security and clean energy goals. However, current intra-REE separation technologies (e.g. solvent extraction) are costly and carry a heavy environmental burden. Therefore, the development of new aqueous based ligands that are selective for individual REEs will be integral in future REE production systems. To develop these ligands, an understanding of how ligand coordination structure relates to selectivity is imperative. We used X-ray absorption spectroscopy (XAS) to observe the local structure around four lanthanide (Ln) ions (La, Ce, Pr and Nd) complexed by water and several relevant chelating ligands [lanmodulin EF-hand 1 peptides (LanM1), ethyl­enedi­amine­tetra­acetic acid (EDTA), amino­tris­(methyl­ene­phospho­nic acid) (ATMP) and citric acid]. To collect these liquid-phase XAS spectra, we developed a new flow cell that prevents bubble interference and beam damage to the samples. In the X-ray absorption near-edge structure (XANES), we observed energy shifts in the white line, white line broadening and differences in the white line intensity of different Ln–ligand complexes between ligands. In the extended X-ray absorption fine structure (EXAFS), we distinguished differences in peak intensity and distance between coordinating ligands. Differences in the local coordination structure between Ln–LanM1 peptide complexes were more subtle compared with the other ligands (La–water, La–EDTA, La–ATMP and La–citric acid complexes). Further XANES and EXAFS studies, in combination with modelling and other techniques, could greatly improve our structural knowledge of how these aqueous ligands bind Ln ions and how they can be used to design more selective ligands for more efficient and sustainable REE separations.

EDTA↗

Charge-lattice coupling and the dynamic structure of the U–O distribution in UO 2+x

The different structures and behaviors of UO 2+x observed in crystallographic and local structure measurements were examined by extended X-ray absorption fine structure (EXAFS) measurements of pristine UO 2.0 , p + and He 2+ irradiated UO 2.0 , and, at multiple temperatures, bulk U 4 O 9 and U 3 O 7 and thin film U 4 O 9-δ on an epitaxial substrate. The disorder caused by irradiation is mostly limited to increased widths of the existing U–O/U pair distributions, with any new neighbor shells being minor. As has been previously reported, the disorder caused by oxidative addition to U 4 O 9 and U 3 O 7 is much more extensive, resulting in multisite U–O distributions and greater reduction of the U–U amplitude with different distributions in bulk and thin-film U 4 O 9 . This includes the significant spectral feature near R = 1.2 Å for all U 4 O 9 and U 3 O 7 samples fit with a U-oxo type moiety with a U–O distance around 1.7 Å. In addition to indicating that these anomalies only occur in mixed valence materials, this work confirms the continuous rearrangement of the U–O distributions from 10 to 250 K. Although these variations of the structure are not observed in crystallography, their prominence in the EXAFS indicates that the dynamic structure underlying these effects is an essential factor of these materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Uranium (VI) Adsorbate Structures on Portlandite [Ca(OH)2] Type Surfaces Determined by Computational Modelling and X-ray Absorption Spectroscopy

Portlandite [Ca(OH) 2 ] is a potentially dominant solid phase in the high pH fluids expected within the cementitious engineered barriers of Geological Disposal Facilities (GDF). This study combined X-ray Absorption Spectroscopy with computational modelling in order to provide atomic-scale data which improves our understanding of how a critically important radionuclide (U) will be adsorbed onto this phase under conditions relevant to a GDF environment. Such data are fundamental for predicting radionuclide mass transfer. Surface coordination chemistry and speciation of uranium with portlandite [Ca(OH) 2 ] under alkaline groundwater conditions (ca. pH 12) were determined by both in situ and ex situ grazing incidence extended X-ray absorption fine structure analysis (EXAFS) and by computational modelling at the atomic level. Free energies of sorption of aqueous uranyl hydroxides, [UO 2 (OH) n ] 2–n (n = 0–5) with the (001), (100) and (203) or (101) surfaces of portlandite are predicted from the potential of mean force using classical molecular umbrella sampling simulation methods and the structural interactions are further explored using fully periodic density functional theory computations. Although uranyl is predicted to only weakly adsorb to the (001) and (100) clean surfaces, there should be significantly stronger interactions with the (203/101) surface or at hydroxyl vacancies, both prevalent under groundwater conditions. The uranyl surface complex is typically found to include four equatorially coordinated hydroxyl ligands, forming an inner-sphere sorbate by direct interaction of a uranyl oxygen with surface calcium ions in both the (001) and (203/101) cases. In contrast, on the (100) surface, uranyl is sorbed with its axis more parallel to the surface plane. The EXAFS data are largely consistent with a surface structural layer or film similar to calcium uranate, but also show distinct uranyl characteristics, with the uranyl ion exhibiting the classic dioxygenyl oxygens at 1.8 Å and between four and five equatorial oxygen atoms at distances between 2.28 and 2.35 Å from the central U absorber. These experimental data are wholly consistent with the adsorbate configuration predicted by the computational models. These findings suggest that, under the strongly alkaline conditions of a cementitious backfill engineered barrier, there would be significant uptake of uranyl by portlandite to inhibit the mobility of U(VI) from the near field of a geological disposal facility.

36 MATERIALS SCIENCE↗

Fischer-Tropsch Synthesis: The Characterization and Testing of Pt-Co/SiO 2 Catalysts Prepared with Alternative Cobalt Precursors

Different low-cost cobalt precursors (acetate, chloride) and thermal treatments (air calcination/H 2 reduction versus direct H 2 -activation) were investigated to alter the interaction between cobalt and silica. H 2 -activated catalysts prepared from cobalt chloride had large Co 0 particles (XRD, chemisorption) formed by weak interactions between cobalt chloride and silica (temperature programmed reduction (TPR), TPR with mass spectrometry (TPR-MS), TPR with extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge spectroscopy (XANES) techniques) and retained Cl-blocked active sites, resulting in poor activity. In contrast, unpromoted Co/SiO 2 catalysts derived from cobalt acetate had strong interactions between Co species and silica (TPR/TPR-MS, TPR-EXAFS/XANES); adding Pt increased the extent of the Co reduction. For these Pt-promoted catalysts, the reduction of uncalcined catalysts was faster, resulting in larger Co 0 clusters (19.5 nm) in comparison with the air-calcined/H 2 -activated catalyst (7.8 nm). Both catalysts had CO conversions 25% higher than that of the Pt-promoted catalyst prepared in the traditional manner (air calcination/H 2 reduction using cobalt nitrate) and three times higher than that of the traditional unpromoted Co/silica catalyst. The retention of residual cobalt carbide (observed in XANES) from cobalt acetate decomposition impacted performance, resulting in a higher C 1 –C 4 selectivity (32.2% for air-calcined and 38.7% for uncalcined) than that of traditional catalysts (17.5–18.6%). The residual carbide also lowered the α-value and olefin/paraffin ratio. Future work will focus on improving selectivity through oxidation–reduction cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient Solid‐State Light‐Emitting CuCdS Nanocrystals Synthesized in Air

Abstract Semiconductor nanocrystals (NCs) possess high photoluminescence (PL) typically in the solution phase. In contrary, PL rapidly quenches in the solid state. Efficient solid state luminescence can be achieved by inducing a large Stokes shift. Here we report on a novel synthesis of compositionally controlled CuCdS NCs in air avoiding the usual complexity of using inert atmosphere. These NCs show long‐range color tunability over the entire visible range with a remarkable Stokes shift up to about 1.25 eV. Overcoating the NCs leads to a high solid‐state PL quantum yield (QY) of ca. 55 % measured by using an integrating sphere. Unique charge carrier recombination mechanisms have been recognized from the NCs, which are correlated to the internal NC structure probed by using extended X‐ray absorption fine structure (EXAFS) spectroscopy. EXAFS measurements show a Cu‐rich surface and Cd‐rich interior with 46 % Cu I being randomly distributed within 84 % of the NC volume creating additional transition states for PL. Color‐tunable solid‐state luminescence remains stable in air enabling fabrication of light‐emitting diodes (LEDs).

Khan, Ali Hossain↗

X-ray Absorption Spectroscopy of an Fe-Promoted Rh/TiO2 Catalyst for Synthesis of Ethanol from Synthesis Gas

X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) have been used to elucidate the structural features of a 2% Rh-2.5% Fe/TiO{sub 2} catalyst for syngas conversion to ethanol. The results from Rh K-edge and Fe K-edge spectroscopy on a fresh catalyst exposed to air indicated that both Rh and Fe were present as highly dispersed oxides on the titania, and that both adopted a +3 formal oxidation state. For the catalyst reduced in H{sub 2} at 573 K, the Rh K-edge EXAFS revealed Rh-Rh interactions (coordination number N = 6.1, Rh-Rh distance r{sub Rh-Rh} = 2.67 {angstrom}) and a second feature arising from either Rh-Ti or Rh-O coordination. The metal particles contained on an average about 20 atoms, which is consistent with a particle size of 1 nm. A shift in the Rh K-edge XANES by -2 eV indicated that the reduced Rh particles were electron rich compared to bulk Rh metal. Although Rh was reduced completely to the metal by H{sub 2}, the iron oxide promoter was reduced primarily from Fe{sup III} to Fe{sup II} oxide. The results from X-ray absorption spectroscopy at both the Fe and Rh K-edges were unchanged by exposure of the reduced catalyst to syngas (H{sub 2}+CO) at 543 K. A structural model for this ethanol synthesis catalyst is proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Models for Single–Site Heterogeneous Catalysts on Carbon: MoO 2 Epoxidation Catalyst Anchored to a Fullerene

Single-site molybdenum dioxo catalysts, fullerenol/MoO 2 , are prepared via grafting precursor (DME)MoO 2 Cl 2 onto a highly polyhydroxylated fullerene (ful) and an isomerically-pure and well-defined fullerene (ful*). These catalyst structures are characterized by ICP-OES, XPS, XANES, EXAFS, DRIFT, Raman, and NMR spectroscopy, and DFT. Mo 3d 5/2 XPS and Mo K-edge XANES assign the oxidation state as Mo(VI). Mo EXAFS data fitting reveals two Mo=O double and two Mo–O single bonds at distances of 1.7 and 1.9 Å, respectively, while an Mo=O stretchingl mode is observed at ~950 cm –1 by DRIFT and Raman spectroscopy. These data align well with DFT computational results, supporting the proposed catalyst structure as Fullerene(-μ-O-) 2 M(=O) 2 . Additionally, DFT provides insight into the energetically favorable grafting sites for an isomerically pure fullerenol. The scope of fullerenol/MoO 2 mediated alkene epoxidation includes abiotic alkenes, natural occurring terpenes, and conjugated olefins. For cyclooctene the rate law is first-order in [Mo], near first order in [olefin] and zero-order in [t-butyl hydroperoxide]. A plausible reaction mechanism involves peroxide addition first and then cyclooctene addition directly across the peroxo bond forming the epoxide product, consistent with DFT computation. Overall, fullerenol/MoO 2 shows promise as a sustainable and structurally well-defined system with versatile catalytic activity and good epoxidation recyclability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of the Support in Catalysis: Activation of a Mononuclear Ruthenium Complex for Ethene Dimerization by Chemisorption on Dealuminated ZeoACHTUNGTRENUNGlite Y

A set of supported ruthenium complexes with systematically varied ratios of chemisorbed to physisorbed species was formed by contacting cis-[Ru(acac){sub 2}(C{sub 2}H{sub 4}){sub 2}] (I; acac = C{sub 5}H{sub 7}O{sub 2}{sup -}) with dealuminated zeolite Y. Extended X-ray absorption fine structure (EXAFS) spectra used to characterize the samples confirmed the systematic variation in the loadings of the two supported species and demonstrated that removal of bidentate acac ligands from I accompanied chemisorption to form [Ru(acac)(C{sub 2}H{sub 4}){sub 2}]{sup +} attached through two RuO bonds to the Al sites of the zeolite. A high degree of uniformity in the chemisorbed species was demonstrated by sharp bands in the infrared (IR) spectrum characteristic of ruthenium dicarbonyls that formed when CO reacted with the anchored complex. When the ruthenium loading exceeded 1.0 wt % (Ru/Al {approx} 1:6), the additional adsorbed species were simply physisorbed. Ethene ligands on the chemisorbed species reacted to form butenes when the temperature was raised to approximately 393 K; acac ligands remained bonded to Ru. In contrast, ethene ligands on the physisorbed complex simply desorbed under the same conditions. The chemisorption activated the ruthenium complex and facilitated dimerization of the ethene, which occurred catalytically. IR and EXAFS spectra of the supported samples indicate that (1) Ru centers in the chemisorbed species are more electron deficient than those in the physisorbed species and (2) Ru-ethene bonds in the chemisorbed species are less symmetric than those in the physisorbed species, which implies the presence of a preferred configuration for the catalytic dimerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elucidating the Nature of the Excited State of a Heteroleptic Copper Photosensitizer by using Time‐Resolved X‐ray Absorption Spectroscopy

Abstract We report the light‐induced electronic and geometric changes taking place within a heteroleptic Cu I photosensitizer, namely [(xant)Cu(Me 2 phenPh 2 )]PF 6 (xant=xantphos, Me 2 phenPh 2 =bathocuproine), by time‐resolved X‐ray absorption spectroscopy in the ps–μs time regime. Time‐resolved X‐ray absorption near edge structure (XANES) and extended X‐ray absorption fine structure (EXAFS) analysis enabled the elucidation of the electronic and structural configuration of the copper center in the excited state as well as its decay dynamics in different solvent conditions with and without triethylamine acting as a sacrificial electron donor. A three‐fold decrease in the decay lifetime of the excited state is observed in the presence of triethylamine, showing the feasibility of the reductive quenching pathway in the latter case. A prominent pre‐edge feature is observed in the XANES spectrum of the excited state upon metal to charge ligand transfer transition, showing an increased hybridization of the 3d states with the ligand p orbitals in the tetrahedron around the Cu center. EXAFS and density functional theory illustrate a significant shortening of the Cu−N and an elongation of the Cu−P bonds together with a decrease in the torsional angle between the xantphos and bathocuproine ligand. This study provides mechanistic time‐resolved understanding for the development of improved heteroleptic Cu I photosensitizers, which can be used for the light‐driven production of hydrogen from water.

Moonshiram, Dooshaye↗

Quantifying the Site Heterogeneities of Non‐Uniform Catalysts Using QuantEXAFS

Abstract We present the Multi‐site (MS) QuantEXAFS approach, designed to model the EXAFS data from samples containing an element in different local bonding geometries. Building upon our QuantEXAFS method, which maps experimental extended X‐ray absorption fine structures (EXAFS) data to DFT‐optimized structures, MS‐QuantEXAFS introduces the key capability to probe fractional contributions of multiple sites that may be present in an experimental sample. Specifically, we demonstrate effectiveness of this technique by investigating mixed samples containing known fractions of site‐isolated subsurface Pt/MgO with Pt nanoparticles uniformly supported on MgO. The ‘site‐fractions’ obtained through MS‐QuantEXAFS closely match (i. e., ±6%) the known fractions of the physically mixed samples. This approach has been generalized to other oxides, and thus represents an important advance in quantifying the speciation of non‐uniform catalyst samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combining the Best of Two Chelating Titans: A Hydroxypyridinone-Decorated Macrocyclic Ligand for Efficient and Concomitant Complexation and Sensitized Luminescence of f-Elements

An ideal chelator for f-elements features rapid kinetics of complexation, high thermodynamic stability, and slow kinetics of dissociation. Here we present the facile synthesis of a macrocyclic ligand bearing four 1-hydroxy-2-pyridinone units linked to a cyclen scaffold that rapidly forms thermodynamically stable complexes with lanthanides (Sm 3+ , Eu 3+ , Tb 3+ , Dy 3+ ) and a representative late actinide (Cm 3+ ) in aqueous media and concurrently sensitizes them. Extended X-ray absorption fine structure (EXAFS) spectroscopy revealed an increase in the Ln/An-O bond lengths following the trend Cm>Eu>Tb and EXAFS data were compatible with time-resolved luminescence studies, which indicated one to two water molecules in the inner metal coordination sphere of Eu(III) and two water molecules for the Cm(III) complex. Spectrofluorimetric ligand competition titrations against DTPA confirmed the high thermodynamic stability of DOTHOPO complexes, with pM values between 19.9(1) and 21.9(2).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗