Search NASA⌕ Search

SEARCH · Search NASA

Results for “Eddy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Intercomparison of Large-Eddy Simulations of Arctic Mixed-Phase Clouds: Importance of Ice Size Distribution Assumptions

Large-eddy simulations of mixed-phase Arctic clouds by 11 different models are analyzed with the goal of improving understanding and model representation of processes controlling the evolution of these clouds. In a case based on observations from the Indirect and Semi-Direct Aerosol Campaign (ISDAC), it is found that ice number concentration, Ni, exerts significant influence on the cloud structure. Increasing Ni leads to a substantial reduction in liquid water path (LWP), in agreement with earlier studies. In contrast to previous intercomparison studies, all models here use the same ice particle properties (i.e., mass-size, mass-fall speed, and mass-capacitance relationships) and a common radiation parameterization. The constrained setup exposes the importance of ice particle size distributions (PSDs) in influencing cloud evolution. A clear separation in LWP and IWP predicted by models with bin and bulk microphysical treatments is documented and attributed primarily to the assumed shape of ice PSD used in bulk schemes. Compared to the bin schemes that explicitly predict the PSD, schemes assuming exponential ice PSD underestimate ice growth by vapor deposition and overestimate mass-weighted fall speed leading to an underprediction of IWP by a factor of two in the considered case. Sensitivity tests indicate LWP and IWP are much closer to the bin model simulations when a modified shape factor which is similar to that predicted by bin model simulation is used in bulk scheme. These results demonstrate the importance of representation of ice PSD in determining the partitioning of liquid and ice and the longevity of mixed-phase clouds.

clouds↗
NASA NTRS2015

Comparison of High-Order and Low-Order Methods for Large-Eddy Simulation of a Compressible Shear Layer

The objective of this work is to compare a high-order solver with a low-order solver for performing Large-Eddy Simulations (LES) of a compressible mixing layer. The high-order method is the Wave-Resolving LES (WRLES) solver employing a Dispersion Relation Preserving (DRP) scheme. The low-order solver is the Wind-US code, which employs the second-order Roe Physical scheme. Both solvers are used to perform LES of the turbulent mixing between two supersonic streams at a convective Mach number of 0.46. The high-order and low-order methods are evaluated at two different levels of grid resolution. For a fine grid resolution, the low-order method produces a very similar solution to the highorder method. At this fine resolution the effects of numerical scheme, subgrid scale modeling, and filtering were found to be negligible. Both methods predict turbulent stresses that are in reasonable agreement with experimental data. However, when the grid resolution is coarsened, the difference between the two solvers becomes apparent. The low-order method deviates from experimental results when the resolution is no longer adequate. The high-order DRP solution shows minimal grid dependence. The effects of subgrid scale modeling and spatial filtering were found to be negligible at both resolutions. For the high-order solver on the fine mesh, a parametric study of the spanwise width was conducted to determine its effect on solution accuracy. An insufficient spanwise width was found to impose an artificial spanwise mode and limit the resolved spanwise modes. We estimate that the spanwise depth needs to be 2.5 times larger than the largest coherent structures to capture the largest spanwise mode and accurately predict turbulent mixing.

large eddy simulations↗
NASA NTRS2015

Comparison of High-Order and Low-Order Methods for Large-Eddy Simulation of a Compressible Shear Layer

The objective of this work is to compare a high-order solver with a low-order solver for performing large-eddy simulations (LES) of a compressible mixing layer. The high-order method is the Wave-Resolving LES (WRLES) solver employing a Dispersion Relation Preserving (DRP) scheme. The low-order solver is the Wind-US code, which employs the second-order Roe Physical scheme. Both solvers are used to perform LES of the turbulent mixing between two supersonic streams at a convective Mach number of 0.46. The high-order and low-order methods are evaluated at two different levels of grid resolution. For a fine grid resolution, the low-order method produces a very similar solution to the high-order method. At this fine resolution the effects of numerical scheme, subgrid scale modeling, and filtering were found to be negligible. Both methods predict turbulent stresses that are in reasonable agreement with experimental data. However, when the grid resolution is coarsened, the difference between the two solvers becomes apparent. The low-order method deviates from experimental results when the resolution is no longer adequate. The high-order DRP solution shows minimal grid dependence. The effects of subgrid scale modeling and spatial filtering were found to be negligible at both resolutions. For the high-order solver on the fine mesh, a parametric study of the spanwise width was conducted to determine its effect on solution accuracy. An insufficient spanwise width was found to impose an artificial spanwise mode and limit the resolved spanwise modes. We estimate that the spanwise depth needs to be 2.5 times larger than the largest coherent structures to capture the largest spanwise mode and accurately predict turbulent mixing.

large eddy simulations↗
NASA NTRS2016

Detached Eddy Simulation of Flap Side-Edge Flow

Detached Eddy Simulation (DES) of flap side-edge flow was performed with a wing and half-span flap configuration used in previous experimental and numerical studies. The focus of the study is the unsteady flow features responsible for the production of far-field noise. The simulation was performed at a Reynolds number (based on the main wing chord) of 3.7 million. Reynolds Averaged Navier-Stokes (RANS) simulations were performed as a precursor to the DES. The results of these precursor simulations match previous experimental and RANS results closely. Although the present DES simulations have not reached statistical stationary yet, some unsteady features of the developing flap side-edge flowfield are presented. In the final paper it is expected that statistically stationary results will be presented including comparisons of surface pressure spectra with experimental data.

Simulation↗
NASA NTRSDate not supplied

Improved Prediction of Losses with Large Eddy Simulation in a Low-Pressure Turbine

There is a need to improve predictions of losses resulting from large eddy simulations (LES) of low-pressure turbines (LPT) in gas turbines. This may be done by assessing the accuracy of predictions against validation data and understanding the source of any inaccuracies. LES is a promising approach for capturing the laminar/turbulent transition process in a LPT. In previous studies, the authors utilized LES to model the flow field over a Variable Speed Power Turbine (VSPT) blade and successfully captured characteristic features of separation/reattachment and transition on the suction side at both the cruise (positive incidence) and take-off conditions (negative incidence) and as well, simulated the effect of freestream turbulence (FST) on those phenomena. The predicted pressure loading profiles agreed well with the experimental data for both a high and a low FST case at a Reynolds number of Reex=220,000. In this paper, we present wake profiles resulting from computations for a range of FST values. Although the predicted wake profiles for the lowest FST case (Tu=0.5%) matched the experimental data, at higher FST (Tu=10-15%,) the wake was wider than the experimentally measured wake and for both cases were displaced laterally when compared to the experimental measurements. In our investigation of the causes of the said discrepancies we have identified important effects which could strongly influence the predicted wake profile. Predicted losses were improved by assuring the validity of the flow solution. This was done by utilizing spectral analysis to scrutinize the dynamic behavior of the wake and determine solution accuracy resulting from low mesh density and low accuracy of convective modeling.

CFD↗
NASA NTRSDate not supplied

Large Eddy Simulations of Upper-Ocean Turbulence Across the Equatorial Pacific Cold Tongue

Turbulence in the equatorial Pacific cold tongue plays multiple roles in the sea-surface temperature budget. However, observations of turbulence are limited to a handful of field experiments lasting from a few days to one month at 0 N , 140 W, and the key turbulent fluxes can only be inferred. Although explicit simulations of turbulence resolve these fluxes, the required large eddy simulations (LES) are costly and thus also limited to a few weeks. A two-fold hypothesis motivates this contribution to the PUMP pre-field modelling experiments in support of TPOS: 1) that there exist useful relationships between the surface wind, wave, and buoyancy forcing, oceanic shear and stratification, and turbulent mixing, but 2) these relationships differ between regions of equatorial dynamics (f~0) and higher latitudes, such that the state space is insufficiently sampled to understand these relationships and represent them in ocean general circulation models (OGCM). To address the lack of observations, we simulated 35 continuous days of upper ocean turbulence using LES during October-November 1985 at sites in two regions (70 days in total) of the cold tongue: 0 N, 140 W and 3 N, 140 W. The model reproduces many features of the observed turbulence at 0,140W, including the “deep-cycle” observed by Gregg et al. (1985) Nature and the turbulent pulses every few hours during the night and in the early morning. Furthermore, the results at 3 N support the hypothesis advanced by Cherian et al. (2021) JPO that strong, but intermittent deep-cycle turbulence is observed to the north of the equator in the presence of strong shear associated with Tropical Instability Waves. Comparisons with the K-profile parameterization (KPP) scheme show that additional tuning of the KPP parameters can reduce differences between the turbulent fluxes produced by KPP and LES at both sites. The results will suggest modifications to OGCMs and already emphasize the need for a more extensive measurements of vertical profiles of shear, stratification and turbulent mixing to reveal the spatio-temporal structure of turbulence and how it relates to forcing, shear and stratification across the equatorial Pacific Cold tongue.

Large Eddy Simulations↗
NASA NTRSDate not supplied

Large-Eddy Simulations of a Single-Injector Cooling Flow Using the High-Order Flux Reconstruction Method

A single-injector cooling flow into a heated crossflow was used as a validation case for large eddy simulations (LES) from two high-order CFD codes with comparisons to a state-of-the-art Reynolds averaged Navier-Stokes (RANS) turbulence model. The focus of this paper is on the validation of LES for one of the high-order CFD codes, namely the GFR (Glenn Flux Reconstruction) code that is being developed at NASA Glenn Research Center. Fourth-order LES were performed for the single-injector cooling flow configuration at blowing ratios of both 1.0 and 2.0, and a fifth-order LES was also performed with a blowing ratio of 1.0. The GFR simulations agree very well with the experiment mean quantities and reasonably well with the experiment turbulence quantities. The LES solutions from GFR and the other high-order CFD code, FDL3DI, agreed very closely for nearly every flow quantity examined, despite the fact that these two codes use completely different numerical methods, different grid geometries and domains, and different inflow boundary conditions. Finally, both LES show a significant accuracy improvement over RANS turbulence models for flows with large temperature gradients, where the standard gradient diffusion approximation is insufficient for temperature predictions.

Large Eddy Simulations↗
NASA NTRSDate not supplied

Large Eddy Simulations of a Single-Injector Cooling Flow Using the High-Order Flux Reconstruction Method

A single-injector cooling flow into a heated crossflow was used as a validation case for large eddy simulations (LES) from two high-order CFD codes with comparisons to a state-of-the-art Reynolds averaged Navier-Stokes (RANS) turbulence model. The focus of this paper is on the validation of LES for one of the high-order CFD codes, namely the GFR (Glenn Flux Reconstruction) code that is being developed at NASA Glenn Research Center. Fourth-order LES were performed for the single-injector cooling flow configuration at blowing ratios of both 1.0 and 2.0, and a fifth-order LES was also performed with a blowing ratio of 1.0. The GFR simulations agree very well with the experiment mean quantities and reasonably well with the experiment turbulence quantities. The LES solutions from GFR and the other high-order CFD code, FDL3DI, agreed very closely for nearly every flow quantity examined, despite the fact that these two codes use completely different numerical methods, different grid geometries and domains, and different inflow boundary conditions. Finally, both LES show a significant accuracy improvement over RANS turbulence models for flows with large temperature gradients, where the standard gradient diffusion approximation is insufficient for temperature predictions.

Large Eddy Simulation↗
NASA NTRSDate not supplied

Implicit Large-Eddy Simulation of Single-Injector Cooling Flow

The turbulent heat flux vector plays a critical role in aero-propulsion flow. Currently, traditional RANS based methods do not currently have reliable closures which can accurately predict the turbulent transport of heat. Scale Resolving Simulations can provide critical insight into this fundamental fluid mechanism. Large-eddy Simulations (LES) were performed on the single-hole film-cooling experimental configuration from the recent experiments conducted at NASA Glenn Research Center (GRC)[1]. The experiment of Wernet et al. obtained mean and fluctuating temperatures which can be used to validate LES results predicting the turbulent heat flux vector. The FDL3DI flow solver was used to complete simulations of two blowing ratios of the THX - III dataset. A grid sensitivity study was also performed. Initial LES results show promising agreement between the simulation and experimental measurements.

High-Order methods↗
NASA NTRS2021

Large-Eddy Simulations of Marine Boundary-Layer Clouds Associated With Cold Air Outbreaks During the Activate Campaign – Part 1: Case Setup and Sensitivities to Large-Scale Forcings

Large-eddy simulation (LES) is able to capture key boundary-layer (BL) turbulence and cloud processes. Yet, large-scale forcing and surface turbulent fluxes of sensible and latent heat are often poorly prescribed for LES simulations. We derive these quantities from measurements and reanalysis obtained for two cold air outbreak (CAO) events during Phase I of the Aerosol Cloud meTeorology Interactions oVer the western ATlantic Experiment (ACTIVATE) in February-March 2020. We study the two contrasting CAO cases by performing LES and test the sensitivity of BL structure and clouds to large-scale forcings and turbulent heat fluxes. Profiles of atmospheric state and large-scale divergence and surface turbulent heat fluxes obtained from the reanalysis data ERA5 agree reasonablywell with those derived fromACTIVATE field measurements for both cases at the sampling time and location. Therefore, we adopt the time evolving heat fluxes, wind and advective tendencies profiles from ERA5 reanalysis data to drive the LES.We find that large-scale thermodynamic advective tendencies and wind relaxations are important for the LES to capture the evolving observed BL meteorological states characterized by the hourly ERA5 reanalysis data and validated by the observations. We show that the divergence (or vertical velocity) is important in regulating the BL growth driven by surface heat fluxes in LES simulations. The evolution of liquid water path is largely affected by the evolution of surface heat fluxes. The liquid water path imulated in LES agrees reasonably well with the ACTIVATE measurements. This study paves the path to investigate aerosol-cloud-meteorology interactions using LES informed and evaluated by ACTIVATE field measurements.

Large-eddy simulation↗
NASA NTRSDate not supplied

High-Order Finite-Difference Large-Eddy Simulations of a Supersonic Nozzle

Large-eddy simulations of the flow emanating from supersonic nozzles were carried out for the 6th Propulsion Aerodynamics Workshop to be held at the AIAA SciTech Conference. The purpose of the work is to detail the ability of a high-order of accuracy finite-difference based numerical scheme to accurately compute this flow. Results for both a perfectly expanded and over-expanded flow case are presented. Several complicating factors are discussed: 1) the limitations on the computational grid imposed by the numerical method, 2) the effect of additional dissipation necessary to resolve shock waves and 3) the effect of the nozzle boundary layer on the flow. Results indicate that the simulations replicate the basic flow physics, but there is room for improvement in accuracy. Areas for future study are outlined.

turbulence↗
NASA NTRSDate not supplied

FluxSat: Long-term Earth Science Data Record (ESDR) for Terrestrial Gross Primary Production (GPP) based on satellite data calibrated with eddy covariance data

Gross primary production (GPP), the amount of carbon dioxide (CO 2 ) assimilated by plants through photosynthesis, is one of the most variable and uncertain components of the global carbon cycle. Global GPP has been estimated with a number of process-based models, data-driven, and hybrid approaches. Dynamic global vegetation models (DGVMs), driven by observed environmental changes, are used for global carbon budget assessments and long-term (climate) prediction. Benchmarking these and other models globally with data-driven GPP estimates is critical for understanding the land sink and ensuring accurate forecasts of the carbon cycle. In addition, global data-driven GPP estimates are crucial for studies of interannual variability, including trends that are linked to mechanisms with large uncertainties, such as the indirect CO 2 fertilization effect related to greening. In response to a community need for a GPP data set that well captures spatio-temporal variability, we developed FluxSat, a data-driven approach that optimizes the use of satellite reflectance data from the NASA MODerate-resolution Imaging Spectroradiometer (MODIS) on the Terra and Aqua satellites, calibrated using ground-based eddy covariance (EC) data. We are enhancing (spatially, higher resolution) and extending FluxSat (in time, with additional sensors) to create a high quality long term GPP Earth System Data Record (ESDR) for use in model benchmarking, carbon cycle modeling, and studies of trends and interannual variability. Our team’s objectives are to: 1. Update and document the current MODIS FluxSat GPP (daily, 0.05o and 0.5o resolutions) products with latest available MODIS and EC data sets; 2. Extend FluxSat GPP record forward in time with the Visible Infrared Imaging Radiometer Suite (VIIRS) on operational weather satellites going forward; 3. Extend FluxSat GPP record backward in time using the Advanced Very High Resolution Radiometer (AVHRR) on weather satellites dating back to 1981; 4. Provide higher spatial resolution MODIS and VIIRS GPP (0.0083o). 5. Thoroughly evaluate all FluxSat products with independent data; and 6. Create a homogenized long-term GPP record spanning 40+ years. We will discuss plans for this long-term data set that is supported through the NASA Making Earth System Data Records for Use in Research Environments (MEaSUREs) program.

gross Primary Production↗