Search NASA⌕ Search

SEARCH · Search NASA

Results for “Enhanced Sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Elucidating structural characteristics of biomass using solution-state 2 D NMR with a mixture of deuterated dimethylsulfoxide and hexamethylphosphoramide

In recent developments of NMR methods for characterization of lignocellulosic biomass allow improved understanding of plant cell-wall structures with minimal deconstruction and modification of biomass. This study introduces a new NMR solvent system composed of dimethylsulfoxide (DMSO- d 6 ) and hexamethylphosphoramide (HMPA- d 18 ). HMPA as a co-solvent enhanced swelling and mobility of the biomass samples; thereby it allowed enhancing signals of NMR spectra. Moreover, the structural information of biomass was successfully analyzed by the proposed NMR solvent system (DMSO- d 6 /HMPA-d 18 ; 4:1, v/v ) with different biomass. The proposed bi-solvent system does not require derivatization or isolation of biomass, facilitating a facile sample preparation and involving with no signals overlapping with biomass peaks. Furthermore, it also allows analyzing biomass with a room-temperature NMR probe instead of cryo-probes, which are traditionally used for enhancing signal intensities.

09 BIOMASS FUELS↗

Enhancing the Sensitivity to New Physics in the top-antitop Invariant Mass Distribution

We propose selection cuts on the LHC t{bar t} production sample which should enhance the sensitivity to New Physics signals in the study of the t{bar t} invariant mass distribution. We show that selecting events in which the t{bar t} object has little transverse and large longitudinal momentum enlarges the quark-fusion fraction of the sample and therefore increases its sensitivity to New Physics which couples to quarks and not to gluons. We find that systematic error bars play a fundamental role and assume a simple model for them. We check how a non-visible new particle would become visible after the selection cuts enhance its resonance bump. A final realistic analysis should be done by the experimental groups with a correct evaluation of the systematic error bars.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ultra-Fast Sample Preparation for High-Throughput Proteomics

Sample preparation oftentimes can be the Achilles Heel of any analytical process and in the field of proteomics, preparing samples for mass spectrometric analysis is no exception. Current goals, concerning proteomic sample preparation on a large scale, include efforts toward improving reproducibility, reducing the time of processing and ultimately the automation of the entire workflow. This chapter reviews an array of recent approaches applied to bottom-up proteomics sample preparation to reduce the processing time down from hours to minutes. The current state-of-the-art in the field uses different energy inputs like microwave, ultrasound or pressure to perform the four basic steps in sample preparation: protein extraction, denaturation, reduction and alkylation, and digestion. No single energy input for enhancement of proteome sample preparation has become the universal gold standard. Instead, a combination of different energy inputs tend to produce the best results. This chapter further describes the future trends in the field such as the hyphenation of sample preparation with downstream detection and analysis systems. Finally, a detailed protocol describing the combined use of both pressure cycling technology and ultrasonic energy inputs to hasten proteomic sample preparation is presented.

59 BASIC BIOLOGICAL SCIENCES↗

Evidence for Higher Black Hole Spin in Radio-loud Quasars

One of the major unsolved questions concerning the understanding of the active galactic nucleus population is the origin of the dichotomy between radio-quiet and radio-loud quasars. The most promising explanation is provided by the spin paradigm, which suggests that radio-loud quasars have a higher black hole spin. However, the measurement of black hole spin remains extremely challenging. We here aim at comparing the mean radiative efficiencies of carefully matched samples of radio-loud and radio-quiet Sloan Digital Sky Survey (SDSS) quasars at 0.3<z<0.8. We use the [O iii] luminosity as an indirect average tracer of the ionizing continuum in the extreme-UV regime where the differences in the spectral energy distribution (SED) due to black hole spin are most pronounced. We find that the radio-loud sample shows an enhancement in [O iii] line strength by a factor of at least 1.5 compared to a radio-quiet sample matched in redshift, black hole mass, and optical continuum luminosity or accretion rate. We argue that this enhancement is caused by differences in the SED, suggesting higher average bolometric luminosities at fixed accretion rate in the radio-loud population. This suggests that the radio-loud quasar population has on average systematically higher radiative efficiencies and therefore higher black hole spin than the radio-quiet population, providing observational support for the black hole spin paradigm.

79 ASTRONOMY AND ASTROPHYSICS↗

Localized to Propagating Surface Plasmon Resonance Transition in Ni-Au Magneto-Plasmonic Gratings

Magneto-plasmonic structures, which are the best candidates for different applications, have been the subject of intense research in recent years. In this paper, we proposed new magneto-plasmonic structures based on different uni-dimensional gratings to investigate the localized to propagative surface plasmon resonance transition. For this purpose, simulation of reflectance and also surface plasmon resonance coupling were used in three different fabricated samples compared with nickel thin film under different azimuthaly excitations. The fabricated samples show an enhanced magneto-optical rotation due to the transition of two types of plasmon in the sample with intermediate dimensions. The prospects of magneto-plasmonic response dependency on the azimuthaly excitation are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The role of helium implantation induced vacancy defect on hardening of tungsten

Vacancy-type defects created by helium implantation in tungsten and their impact on the nano-hardness characteristics were investigated by correlating the results from the positron annihilation spectroscopy and the nano-indentation technique. Helium implantation was performed at room temperature (RT) and at an elevated temperate of 600 °C. Also, the effect of post-annealing of the RT implanted sample was studied. The S parameter characterizing the open volume in the material was found to increase after helium irradiation and is significantly enhanced for the samples thermally treated at 600 °C either by irradiation at high temperature or by post-annealing. Two types of helium-vacancy defects were detected after helium irradiation; small defects with high helium-to-vacancy ratio (low S parameter) for RT irradiation and large defects with low helium-to-vacancy ratio (high S parameter) for thermally treated tungsten. The hardness of the heat treated tungsten coincides with the S parameter, and hence is controlled by the large helium-vacancy defects. The hardness of tungsten irradiated at RT without thermal treatment is dominated by manufacturing related defects such as dislocation loops and impurity clusters and additionally by trapped He atoms from irradiation effects, which enhance hardness. He-stabilized dislocation loops mainly cause the very high hardness values in RT irradiated samples without post-annealing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Construction of hybrid Ag2CO3/AgVO3 nanowires with enhanced visible light photocatalytic activity

Highlights: • Hybrid Ag{sub 2}CO{sub 3}/AgVO{sub 3} nanowires were successfully synthesized. • The as-prepared sample displayed highly enhanced photocatalytic activity. • Possible photocatalytic mechanism for RhB degradation was proposed. - Abstract: Visible light driven pollutant degradation by photocatalyst was one of most efficient and economical strategies for environmental application. The focus and challenge was to fabricate efficient artificial photocatalysts. In this work, hybrid Ag{sub 2}CO{sub 3}/AgVO{sub 3} nanowires were first reported to be successfully synthesized by the facile ion-exchange method. The as-prepared Ag{sub 2}CO{sub 3}/AgVO{sub 3} nanowires showed highly improved visible light photocatalytic activity for RhB degradation, and the optimized Ag{sub 2}CO{sub 3}/AgVO{sub 3}-40% photocatalyst exhibited the best photocatalytic activity, which is 3.6 times of pure Ag{sub 2}CO{sub 3} and 13.3 times of pure AgVO{sub 3} catalysts, mainly due to the formation of Ag nanoparticles and Ag{sub 2}CO{sub 3}/AgVO{sub 3} heterojunction for charge separation. The degradation of RhB solution was mainly attributed to direct hole oxidation, which was also confirmed by the active species trapping experiments. Finally, the possible visible light photocatalytic mechanism of Ag/Ag{sub 2}CO{sub 3}/AgVO{sub 3} composites for RhB degradation was proposed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Deposition Temperature on the Tribology of MOCVD Zinc Oxide Thin Films Tested under Dry Contact

Zinc oxide has justifiably been attracting attention in several fields, and the relatively new field of tribology is not left out. Aside from its already extensively researched and documented applications in materials science, semiconductor and electronics industry, zinc oxide nanoparticles and thin films appear to be gaining fast grounds as tribological materials, thereby justifying a zealous approach in further exploring their inherent properties in this area. In this work, zinc oxide thin films were deposited by MOCVD (metal-organic chemical vapour deposition) on soda lime glass andAISI304L stainless steel plates at temperatures of 300°C, 330°C, 360°C, 390°C and 420°C respectively, using anhydrous zinc acetate as the precursor. The carrier gas was air with a flow rate of 2.5 dm 3 min -1 at atmospheric pressure, and deposition time of 2 hours each. The thickness and tribological properties of the thin films produced were thereafter investigated. The thickness was measured by RBS (Rutherford backscattering spectroscopy) using a 1.7 MeV Tandem Accelerator, and the friction and wear properties were tested with a HFRR (high frequency reciprocating rig) under dry contact conditions, Olympus BH-2 Optical Microscope, and ADE Phase Shift MicroXam Optical Surface Profiler. The thickness was found to decrease with increasing deposition temperature, although for the 300°C deposition temperature there appeared to be a bloated thickness, which is attributable to such factors as incomplete precursor decomposition, turbulence in precursor flow, and energy straggling during RBS measurement. The friction tests highlighted coefficients of friction which were relatively low at the onset of the tests, but thereafter rapidly increased, owing possibly to temperature rise, attendant rapid oxidation and aided abrasion by worn debris. The average coefficient of friction of each test was computed, and the outcome (0.33 – 0.43) for all of them was a material still good enough for use in reducing friction at nanolevel, even with worn out matter and increased working temperature, with no noticeable trend regarding their varied deposition temperatures. Microscope and profilometer profiles vividly showed wear scars with material removal and material transfer. The average wear scar diameters as well as the wear volumes were compiled for both the test balls and the thin films. The result showed a largely correlated trend in the wear scar diameters and the wear volumes, and the thin film deposited at 330°C was the coating with the least wear scars, material removal cum transfer on the test ball and sample. This result is attributed to the enhanced thickness of the sample over the others, apart from sample X1 earlier reported to have a problem in its thickness. As a result, this temperature is therefore recommended as the optimum deposition temperature for the best tribologically applicable zinc oxide thin films, using zinc acetate precursor by MOCVD.

36 MATERIALS SCIENCE↗

Performance of a CsBr coated Nb photocathode at room temperature

Experiments performed on Nb substrates coated with thin films of CsBr indicate a substantial enhancement of 150 to 800 times of the photoyield at 257 nm relative to the uncoated substrates. Results are presented for several power density illuminations and sample thickness. Further enhancement of photoyield was observed when the laser illumination was interrupted for a short time in samples with 5-10 nm thick CsBr coatings.

36 MATERIALS SCIENCE↗

Gas discharge plasma treatment of poly(ethylene glycol-co-1,3/1,4 cyclohexanedimethanol terephthalate) for enhanced paint adhesion

Low-energy hydrogen-ions and tetrafluoromethane-ions produced from a gas discharge ion source were irradiated to poly(ethylene glycol-co-1,3/1,4 cyclohexanedimethanol terephthalate) (PETG) sheets for enhancing paint adhesion. The ion beams were characterized using a cast steel mass spectrometer, while the untreated and treated samples were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, contact angle measurements, and profilometry. The paint adhesion was determined by using the standard method for evaluating adhesion by knife [ASTM D6677-07, Standard Test Method for Evaluating Adhesion by Knife (ASTM International, West Conshohocken, PA, 2012)] and was correlated with the calculation of the work of adhesion derived from the Young–Dupré equation. After plasma treatment, a significant decrease in the contact angle was observed in all samples, except for the CF{sub 4} ion-treated samples with the discharge current of 3 mA and an irradiation time of 30 min. At longer irradiation times, the treated samples showed lesser changes in the contact angle measurement. The increase in the average and root-mean-square surface roughness was observed on the samples after plasma treatment. The samples treated with either H{sub 2} or CF{sub 4} ions for 15 min showed a direct correlation between the discharge current and surface roughness. The samples treated for 30 min showed no significant correlation between the surface roughness and discharge current, which can be attributed to the possible melting of the samples since PETG has a low melting point. The observation made in this study on the relationship of wettability and surface roughness is consistent with the Wenzel wetting mode. Scanning electron micrographs showed surface etching on the hydrogen ion-treated samples while no significant surface changes were observed for the CF{sub 4} ion-treated samples. In general, paint adhesion was stronger for samples that exhibited enhanced wettability and high work of adhesion. The optimal work of adhesion to double the paint adhesion performance was at least 84.79 mN/m. The increase in the surface roughness after the treatment provided an increased friction between the paint and the PETG surface. The increase in the paint adhesion was also due to the covalent, hydrogen, and van der Waals bonding that are typically observed for highly wettable surfaces.

36 MATERIALS SCIENCE↗

Final Report: Characterization of Hydrogen Adsorption in Carbon-Based Materials by NMR

In support of DOE/EERE's Fuel Cell Technologies Program Hydrogen Sorption Center of Excellence (HSCoE), UNC conducted Nuclear Magnetic Resonance (NMR) measurements that contributed spectroscopic information as well as quantitative analysis of adsorption processes. While NMR based Langmuir isotherms produce reliable H2 capacity measurements, the most astute contribution to the center is provided by information on dihydrogen adsorption on the scale of nanometers, including the molecular dynamics of hydrogen in micropores, and the diffusion of dihydrogen between macro and micro pores. A new method to assess the pore width using H2 as probe of the pore geometry was developed and is based on the variation of the observed chemical shift of adsorbed dihydrogen as function of H2 pressure. Adsorbents designed and synthesized by the Center were assessed for their H2 capacity, the binding energy of the adsorption site, their pore structure and their ability to release H2. Feedback to the materials groups was provided to improve the materials’ properties. To enable in situ NMR measurements as a function of H2 pressure and temperature, a unique, specialized NMR system was designed and built. Pressure can be varied between 10-4 and 107 Pa while the temperature can be controlled between 77K and room temperature. In addition to the 1H investigation of the H2 adsorption process, NMR was implemented to measure the atomic content of substituted elements, e.g. boron in boron substituted graphitic material as well as to determine the local environment and symmetry of these substituted nuclei. The primary findings by UNC are the following: • Boron substituted for carbon in graphitic material in the planar BC3 configuration enhances the binding energy for adsorbed hydrogen. • Arrested kinetics of H2 was observed below 130K in the same boron substituted carbon samples that combine enhanced binding energy with micropore structure. • Hydrogen storage material made from activated PEEK is well suited for hydrogen storage due to its controlled microporous structure and large surface area. • A new porosimetry method for evaluating the pore landscape using H2 as a probe was developed. 1H NMR can probe the nanoscale pore structure of synthesized material and can assess the pore dimension over a range covering 1.2 nm to 2.5 nm, the size that is desired for H2 adsorption. • Analysis of 1H NMR spectra in conjunction with the characterization of the bonding structure of the adsorbent by 13C NMR distinguishes between a heterogeneous and homogeneous pore structure as evidenced by the work on AX21 and activated PEEK. • Most of the sorbents studied are suited to hydrogen storage at low temperature (T < 100K). Of the materials investigated, only boron substituted graphite has the potential to work at higher temperatures if the boron content in the favorable planar BC3 configuration that actively contributes to adsorption can be increased.

08 HYDROGEN↗

ENVIRONMENTAL SAMPLING USING LOCATION SPECIFIC AIR MONITORING IN BULK HANDLING FACILITIES

Since the introduction of safeguards strengthening measures approved by the International Atomic Energy Agency (IAEA) Board of Governors (1992-1997), international nuclear safeguards inspectors have been able to utilize environmental sampling (ES) (e.g. deposited particulates, air, water, vegetation, sediments, soil and biota) in their safeguarding approaches at bulk uranium/plutonium handling facilities. Enhancements of environmental sampling techniques used by the IAEA in drawing conclusions concerning the absence of undeclared nuclear materials or activities will soon be able to take advantage of a recent step change improvement in the gathering and analysis of air samples at these facilities. Location specific air monitoring feasibility tests have been performed with excellent results in determining attribute and isotopic composition of chemical elements present in an actual test-bed sample. Isotopic analysis of collected particles from an Aerosol Contaminant Extractor (ACE) collection, was performed with the standard bulk sampling protocol used throughout the IAEA network of analytical laboratories (NWAL). The results yielded bulk isotopic values expected for the operations. Advanced designs of air monitoring instruments such as the ACE may be used in gas centrifuge enrichment plants (GCEP) to detect the production of highly enriched uranium (HEU) or enrichments not declared by a State. Researchers at Savannah River National Laboratory in collaboration with Oak Ridge National Laboratory are developing the next generation of ES equipment for air grab and constant samples that could become an important addition to the international nuclear safeguards inspector's toolkit. Location specific air monitoring to be used to establish a baseline environmental signature of a particular facility employed for comparison of consistencies in declared operations will be described in this paper. Implementation of air monitoring will be contrasted against the use of smear ES when used during unannounced inspections, design information verification, limited frequency unannounced access, and complementary access visits at bulk handling facilities. Analysis of technical features required for tamper indication and resistance will demonstrate the viability of successful application of the system in taking ES within a bulk handling location. Further exploration of putting this technology into practice is planned to include mapping uranium enrichment facilities for the identification of optimal for installation of air monitoring devices.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Jet energy measurement and its systematic uncertainty in proton–proton collisions at √s = 7 TeV with the ATLAS detector

The jet energy scale (JES) and its systematic uncertainty are determined for jets measured with the ATLAS detector using proton–proton collision data with a centre-of-mass energy of \(\sqrt{s}=7\) TeV corresponding to an integrated luminosity of \(4.7\) \(\,\,\text{ fb }^{-1}\). Jets are reconstructed from energy deposits forming topological clusters of calorimeter cells using the anti-\(k_{t}\) algorithm with distance parameters \(R=0.4\) or \(R=0.6\), and are calibrated using MC simulations. A residual JES correction is applied to account for differences between data and MC simulations. This correction and its systematic uncertainty are estimated using a combination of in situ techniques exploiting the transverse momentum balance between a jet and a reference object such as a photon or a \(Z\) boson, for \({20} \le p_{\mathrm {T}}^\mathrm {jet}<{1000}\, ~\mathrm{GeV }\) and pseudorapidities \(|\eta |<{4.5}\). The effect of multiple proton–proton interactions is corrected for, and an uncertainty is evaluated using in situ techniques. The smallest JES uncertainty of less than 1 % is found in the central calorimeter region (\(|\eta |<{1.2}\)) for jets with \({55} \le p_{\mathrm {T}}^\mathrm {jet}<{500}\, ~\mathrm{GeV }\). For central jets at lower \(p_{\mathrm {T}}\), the uncertainty is about 3 %. A consistent JES estimate is found using measurements of the calorimeter response of single hadrons in proton–proton collisions and test-beam data, which also provide the estimate for \(p_{\mathrm {T}}^\mathrm {jet}> 1\) TeV. The calibration of forward jets is derived from dijet \(p_{\mathrm {T}}\) balance measurements. The resulting uncertainty reaches its largest value of 6 % for low-\(p_{\mathrm {T}}\) jets at \(|\eta |=4.5\). In addition, JES uncertainties due to specific event topologies, such as close-by jets or selections of event samples with an enhanced content of jets originating from light quarks or gluons, are also discussed. The magnitude of these uncertainties depends on the event sample used in a given physics analysis, but typically amounts to 0.5–3 %.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of Using Regenerated Combined FAU and MOR Zeolites as Catalysts during the Pyrolysis of Kraft Lignin

The SiO 2 /Al 2 O 3 mole ratio, pore size, and acid sites are the key parameters of zeolite’s activity in lignin pyrolysis. In this study, the comparison of individual Y and M zeolites, the combined ‘Y + M’ sample after regeneration, and their effect on lignin pyrolysis were studied in five cycles (regeneration and reuse). The results were explained using Brunauer, Emmet, and Teller (BET), micropore surface area (MSA), and total acid sites (TAS) analyses. In comparison with the individual Y or M zeolite sample, the consistent higher catalytic activities of the combined ‘Y + M’ sample in repeated cycles were observed. Pyrolysis heavy oils were characterized by nuclear magnetic resonance (NMR) spectroscopy and gel permeation chromatography (GPC). The NMR analyses revealed that with increased zeolite regeneration cycles, p-hydroxy phenyl and methoxyl groups increased. Decreases in guaiacyl phenolic hydroxyl were less for the combined ‘Y + M’ sample than the individual Y and M zeolites. Lower weight average (M w ) of heavy oil for the combined ‘Y + M’ sample indicated the enhanced cleavage of lignin structures in pyrolysis. These results support the higher catalytic activity of regenerated zeolites for the combined ‘Y + M’ sample compared with individual Y and M zeolites due to the improved MSA and TAS.

59 BASIC BIOLOGICAL SCIENCES↗

Image fusion for neutron tomography of nuclear fuel

Image fusion, the process of combining different images together, can be useful to create a more complete picture. In this work, image fusion is applied to neutron tomography of nuclear fuel with the goal of enhancing the information obtained about the fuel. Different reconstruction methods, such as Feldkamp, Davis and Kress filtered back projection and Simultaneous Reconstruction Technique, were combined to enhance image quality. This methodology was shown to reduce noise and ring artifacts without sacrificing sharp edges, allowing for a more accurate representation of sample geometry. Technique enhancements and future applications for the neutron imaging community are also discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Impact of Domain Knowledge on the Property Prediction of Specialized Machine Learning Models

Developing transferable machine learning models is trending in data-driven materials research. However, how to apply such models to a specific research domain remains unclear. Here, in this work, we choose high-entropy materials as a platform with a specialized data set containing 145,323 DFT-relaxed materials. This data set is used to explore the role of domain-specific knowledge in training effective models. Our tests with three representative graph neural network architectures indicate the model complexity has much smaller influence on performance than the data itself. Specifically, the consideration of low-energy atomic ordering, structures with diverse elemental coverage, and high-order interactions significantly influences the model performance. We also find that domain knowledge-driven sampling can greatly enhance unsupervised learning techniques. This research highlights that developing specialized data sets is more beneficial than further complicating deep learning architectures. Additionally, physics-inspired sampling algorithms are crucially needed for better machine learning models for a specific materials research domain.

36 MATERIALS SCIENCE↗

Characterizing the complex permittivity of high-κ dielectrics using enhanced field method

This paper proposed a method to characterize the complex permittivities of samples based on the enhancement of the electric field strength. The enhanced field method significantly improves the measuring range and accuracy of the samples’ electrical properties. Full-wave simulations reveal that the resonant frequency is closely related to the dielectric constant of the sample. In addition, the loss tangent can be determined from the measured quality factor and the just obtained dielectric constant. Materials with low dielectric constant and very low loss tangent are measured for benchmarking and the measured results agree well with previous understanding. Interestingly, materials with extremely high dielectric constants (ε{sub r} > 50), such as titanium dioxide, calcium titanate, and strontium titanate, differ greatly as expected.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Exciton confinement in homo- and heteroepitaxial ZnO/Zn{sub 1-x}Mg{sub x}O quantum wells with x < 0.1

ZnO/Zn{sub 1-x}Mg{sub x}O single quantum well (SQW) structures with well widths d{sub W} between 1.1 nm and 10.4 nm were grown by plasma-assisted molecular beam epitaxy both heteroepitaxially on c-plane sapphire and homoepitaxially on (0001)-oriented bulk ZnO. A significantly reduced Mg incorporation in the top barrier related to the generation of stacking faults is observed for heteroepitaxial samples. Exciton localization is observed for both types of samples, while an enhancement of the exciton binding energy compared to bulk ZnO is only found for homoepitaxial SQWs for 2 nm {<=} d{sub W} {<=} 4 nm. Consistently, for homoepitaxial samples, the carrier dynamics are mainly governed by radiative recombination and carrier cooling processes at temperatures below 170 K, whereas thermally activated non-radiative recombination dominates in heteroepitaxial samples. The effects of polarization-induced electric fields are concealed for Mg concentrations x < 0.1 due to the reduction of the exciton binding energy, the screening by residual carriers as well as the asymmetric barrier structure in heteroepitaxial wells.

36 MATERIALS SCIENCE↗