Search NASA⌕ Search

SEARCH · Search NASA

Results for “Estimation method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

A Long-Term GOES Satellite Overshooting Cloud Top and Anvil Cloud Climatology Over South America

The modern-era GOES satellite series began in 1994 with the GOES-8 satellite, and was augmented in 2018 with higher spatial resolution and more frequent imaging when GOES-16 became operational. GOES imagery has provided forecasters and researchers new perspectives into cloud top patterns associated with severe convection, and the ability to better forecast convection in regions without adequate ground-based weather radar coverage. While much attention has been given to convection over North America, convection over South America can be equally, if not more, intense and frequent. Recent studies have demonstrated that overshooting cloud tops (OT) and surrounding anvil clouds can be detected within infrared satellite imagery. Relative storm updraft intensity metrics such as the tropopause-relative infrared brightness temperature, the prominence of an OT relative to its surrounding anvil, and cloud top height can also be derived using automated methods combined with reanalysis data. These automated OT detection and intensity estimation methods have recently been applied to all GOES images collected over South America, in combination with the MERRA-2 reanalysis, from 1995 to 2022 at NASA Langley within a project supported by the NASA Applied Sciences Disasters program. Innovative aggregation methods have merged these products into daily, monthly, annual, and multi-annual composites, with hourly time bins, at ~4 km pixel spacing to enable researchers a new opportunity to study South American convective processes throughout the diurnal cycle. These products have recently become publicly available from NASA. This presentation will overview this new dataset, and novel insights into South American convection depicted by the data.

Kristopher Bedka↗

Use of three-cornered hat error estimates in MERRA-2 to guide an improved reanalysis-Part 1

The three-cornered hat (3CH) method estimates the uncertainties of three different co-located model or observational data sets (Anthes and Rieckh, 2018; Sjoberg et al., 2021). Rieckh et al. (2021) used the 3CH method to compare the random error statistics of different global forecast and reanalysis models, as well as radio occultation (RO) and radiosonde observations. That study showed that the MERRA-2 reanalysis, while having smaller errors in the stratosphere than its predecessor MERRA, had larger errors in the troposphere than many of the other data sets analyzed. The MERRA-2 errors were particularly large in the tropics. In a collaborative effort between UCAR’s COSMIC (Constellation Observing System for Meteorology, Ionosphere and Meteorology) program and NASA’s Global Modeling and Assimilation Office (GMAO), we carried out further 3CH error diagnostics to help isolate the causes of these larger errors and help guide the development of an improved reanalysis. This presentation summarizes random error statistics associated with MERRA-2, ECMWF’s ERA5 reanalysis, and COSMIC-2 (C2) RO observations. We compute 3CH error variance estimates of refractivity, as well as temperature and specific humidity using UCAR’s COSMIC Data Analysis and Archive Center (CDAAC) improved 1D-variational (1D-Var) retrieval (wetPf2) over 15 latitude bands from 45S to 45N. The 1D-Var retrievals of specific humidity and temperature for C2 use NCEP’s Global Forecast System (GFS) as the background. Anthes et al. (2021) showed that it gives accurate estimates of temperature and specific humidity in the tropics and subtropics, even in the challenging environment of intense Hurricane Dorian (2019). This presentation confirms the previous results that MERRA-2 has significantly larger errors in the tropics and subtropics than either C2 or ERA5. Its errors are larger between 30S and 30N compared to 30-45 N-S latitudes, and are also larger over land compared to oceans. Most of the MERRA-2 refractivity errors come from specific humidity, except over land below 3 km where temperature errors are large. These results suggest that moist convection and atmospheric boundary layer physics in MERRA-2 may be responsible for a significant part of the higher uncertainties. These results are being used to guide GMAO in developing an improved next-generation reanalysis, as shown in a companion presentation submitted to this conference (El Akkraoui et al., 2021), which extends this study and describes improvements to MERRA-2 leading to the next GMAO reanalysis.

Jeremiah Sjoberg↗

A Modeling Approach to Global Land Surface Monitoring with Low Resolution Satellite Imaging

The effects of changing land use/land cover on global climate and ecosystems due to greenhouse gas emissions and changing energy and nutrient exchange rates are being addressed by federal programs such as NASA's Mission to Planet Earth (MTPE) and by international efforts such as the International Geosphere-Biosphere Program (IGBP). The quantification of these effects depends on accurate estimates of the global extent of critical land cover types such as fire scars in tropical savannas and ponds in Arctic tundra. To address the requirement for accurate areal estimates, methods for producing regional to global maps with satellite imagery are being developed. The only practical way to produce maps over large regions of the globe is with data of coarse spatial resolution, such as Advanced Very High Resolution Radiometer (AVHRR) weather satellite imagery at 1.1 km resolution or European Remote-Sensing Satellite (ERS) radar imagery at 100 m resolution. The accuracy of pixel counts as areal estimates is in doubt, especially for highly fragmented cover types such as fire scars and ponds. Efforts to improve areal estimates from coarse resolution maps have involved regression of apparent area from coarse data versus that from fine resolution in sample areas, but it has proven difficult to acquire sufficient fine scale data to develop the regression. A method for computing accurate estimates from coarse resolution maps using little or no fine data is therefore needed.

Hlavka, Christine A.↗

A potential method for the estimation of drop size distribution from a dual-wavelength airborne radar

In order to investigate the role of the drop size distribution (DSD) from a dual-wavelength airborne radar and to recover profiled rain rates, a procedure is described for the purpose of estimating the DSD. The method differs from previous approaches in that it provides 2n + 1 parameters of the profiled DSD (where n is the number of range gates) and it uses a recursive procedure beginning at the range gate near the surface progressing backwards toward the storm top. The method is argued to be useful both as a diagnostic tool and as a means by which more detailed information on the vertical structure of the precipitation can be obtained.

Meneghini, R.↗

Evaluation of Piloted Inputs for Onboard Frequency Response Estimation

Frequency response estimation results are presented using piloted inputs and a real-time estimation method recently developed for multisine inputs. A nonlinear simulation of the F-16 and a Piper Saratoga research aircraft were subjected to different piloted test inputs while the short period stabilator/elevator to pitch rate frequency response was estimated. Results show that the method can produce accurate results using wide-band piloted inputs instead of multisines. A new metric is introduced for evaluating which data points to include in the analysis and recommendations are provided for applying this method with piloted inputs.

Grauer, Jared A.↗

A decision directed detector for the phase incoherent Gaussian channel

A vector digital signalling scheme is proposed for simultaneous adaptive data transmission and phase estimation. The use of maximum likelihood estimation methods predicts a better performance than the phase-locked loop. The phase estimate is shown to converge to the true value, so that the adaptive nature of the detector effectively achieves phase acquisition and improvement in performance. No separate synchronization interval is required and phase fluctuations can be tracked simultaneously with the transmission of information.

Kazakos, D.↗

Evaluation of large area crop estimation techniques

The performance of the USDAs EDITOR system is evaluated. The system processes Landsat imagery and estimates crop hectarage for large areas based on a regression estimator developed on a sample with known ground truth. It is found that use of multitemporal data over unitemporal significantly improves the hectarage estimates, and a 15% reduction in the r-squared of the regression occurs when independent and jackknifed test sets are used to evaluate the performance of the estimator. When an alternative clustering algorithm, CLASSY, is substituted for the current EDITOR method, estimator performance is improved with reduced need for analyst decisions. It is recommended that the CLASSY clustering algorithm and some form of jackknifing be implemented on EDITOR.

Amis, M. L.↗

Determination of aerodynamic parameters of a fighter airplane from flight data at high angles of attack

A procedure for the estimation of airplane model structure and parameters is applied to data from a modern fighter airplane operating within an angle of attack range of 5 to 60 deg. The paper briefly describes the airplane, flight and wind tunnel data available, and the estimation method. The results presented contain basic longitudinal characteristics of the airplane and the estimates of aerodynamic parameters in the yawing-moment equations. These estimates are obtained from small and large amplitude maneuvers. Because the latter set of data was not suitable for airplane identification, some of the large amplitude maneuvers were joined together and then partitioned into subsets according to the values of angle of attack. Each subset was then analyzed as a separate data set. Most of the estimated parameters and functions are in good agreement with the wind tunnel measurements. The estimated lateral parameters in the model equations also demonstrate good prediction capabilities.

Klein, V.↗

Readings in program control

Under the heading of Program Control, a number of related topics are discussed: cost estimating methods; planning and scheduling; cost overruns in the defense industry; the history of estimating; the advantages of cost plus award fee contracts; and how program control techniques led to the success of a NASA development project.

Hoban, Francis T.↗

Optimal Design of Calibration Signals in Space Borne Gravitational Wave Detectors

Future space borne gravitational wave detectors will require a precise definition of calibration signals to ensure the achievement of their design sensitivity. The careful design of the test signals plays a key role in the correct understanding and characterization of these instruments. In that sense, methods achieving optimal experiment designs must be considered as complementary to the parameter estimation methods being used to determine the parameters describing the system. The relevance of experiment design is particularly significant for the LISA Pathfinder mission, which will spend most of its operation time performing experiments to characterize key technologies for future space borne gravitational wave observatories. Here we propose a framework to derive the optimal signals in terms of minimum parameter uncertainty to be injected to these instruments during its calibration phase. We compare our results with an alternative numerical algorithm which achieves an optimal input signal by iteratively improving an initial guess. We show agreement of both approaches when applied to the LISA Pathfinder case.

LISA Path_nder mission↗

Foundations for estimation by the method of least squares

Least squares estimation is discussed from the point of view of a statistician. Much of the emphasis is on problems encountered in application and, more specifically, on questions involving assumptions: what assumptions are needed, when are they needed, what happens if they are not valid, and if they are invalid, how that fact can be detected.

Hauck, W. W., Jr.↗

Effects of flight instrumentation errors on the estimation of aircraft stability and control derivatives

An error analysis program based on an output error estimation method was used to evaluate the effects of sensor and instrumentation errors on the estimation of aircraft stability and control derivatives. A Monte Carlo analysis was performed using simulated flight data for a high performance military aircraft, a large commercial transport, and a small general aviation aircraft for typical cruise flight conditions. The effects of varying the input sequence and combinations of the sensor and instrumentation errors were investigated. The results indicate that both the parameter accuracy and the corresponding measurement trajectory fit error can be significantly affected. Of the error sources considered, instrumentation lags and control measurement errors were found to be most significant.

Bryant, W. H.↗

Application of the Two-Step Filter to Process Ranging Measurements for Relative Navigation in an Elliptical Orbit

This estimator breaks a nonlinear estimation problem into a set of over determined 'first step' states which are linear in the observations and 'second step' states which are ultimately the states of interest. Linear estimation methods are applied to filter the observations and produce the optimal first step state estimate. The 'second step' states are obtained through iterative nonlinear parameter estimation considering the first step states as observations. It has been shown that this process exactly minimizes the least squares cost function for static problems and provides a better solution than the iterated extended Kalman filter (EKF) for dynamic problems. The two step filter is applied in this paper to process range and range rate measurements between the two spacecraft. Details of the application of the two step estimator to this problem will be given, highlighting the use of a test for ill-conditioned covariance estimates that can result from the first order covariance propagation. A comparison will be made between the performance of the two step filter and the IEKF.

Garrison, James L.↗

Top-of-atmosphere radiative fluxes - Validation of ERBE scanner inversion algorithm using Nimbus-7 ERB data

The ERBE algorithm is applied to the Nimbus-7 earth radiation budget (ERB) scanner data for June 1979 to analyze the performance of an inversion method in deriving top-of-atmosphere albedos and longwave radiative fluxes. The performance is assessed by comparing ERBE algorithm results with appropriate results derived using the sorting-by-angular-bins (SAB) method, the ERB MATRIX algorithm, and the 'new-cloud ERB' (NCLE) algorithm. Comparisons are made for top-of-atmosphere albedos, longwave fluxes, viewing zenith-angle dependence of derived albedos and longwave fluxes, and cloud fractional coverage. Using the SAB method as a reference, the rms accuracy of monthly average ERBE-derived results are estimated to be 0.0165 (5.6 W/sq m) for albedos (shortwave fluxes) and 3.0 W/sq m for longwave fluxes. The ERBE-derived results were found to depend systematically on the viewing zenith angle, varying from near nadir to near the limb by about 10 percent for albedos and by 6-7 percent for longwave fluxes. Analyses indicated that the ERBE angular models are the most likely source of the systematic angular dependences. Comparison of the ERBE-derived cloud fractions, based on a maximum-likelihood estimation method, with results from the NCLE showed agreement within about 10 percent.

Suttles, John T.↗

Representation of Probability Density Functions from Orbit Determination using the Particle Filter

Statistical orbit determination enables us to obtain estimates of the state and the statistical information of its region of uncertainty. In order to obtain an accurate representation of the probability density function (PDF) that incorporates higher order statistical information, we propose the use of nonlinear estimation methods such as the Particle Filter. The Particle Filter (PF) is capable of providing a PDF representation of the state estimates whose accuracy is dependent on the number of particles or samples used. For this method to be applicable to real case scenarios, we need a way of accurately representing the PDF in a compressed manner with little information loss. Hence we propose using the Independent Component Analysis (ICA) as a non-Gaussian dimensional reduction method that is capable of maintaining higher order statistical information obtained using the PF. Methods such as the Principal Component Analysis (PCA) are based on utilizing up to second order statistics, hence will not suffice in maintaining maximum information content. Both the PCA and the ICA are applied to two scenarios that involve a highly eccentric orbit with a lower apriori uncertainty covariance and a less eccentric orbit with a higher a priori uncertainty covariance, to illustrate the capability of the ICA in relation to the PCA.

Mashiku, Alinda K.↗

Nonlinear Dynamic Control Derivative Analysis for Aircraft with Application to Transonic Truss-Braced Wing

This paper presents the development of a nonlinear dynamic control derivative estimation method. A nonlinear aerodynamic model is developed to account for the effects of large control surface deflections on aircraft aerodynamic forces and moments. A series of unsteady RANS CFD simulations is performed to simulate the control surface oscillations at various reduced frequencies. The time-domain data are transformed into the frequency-domain data by a Fourier series analysis. Transfer functions of the dynamic control derivatives are then estimated by a frequency-domain regression. The method is applied to the Transonic Truss-Braced Wing (TTBW) to estimate the dynamic control derivatives for the elevator, aileron, and rudder.

Aircraft Control Derivatives↗

Time concurrency/phase-time synchronization in digital communications networks

Digital communications networks have the intrinsic capability of time synchronization which makes it possible for networks to supply time signals to some applications and services. A practical estimation method for the time concurrency on terrestrial networks is presented. By using this method, time concurrency capability of the Nippon Telegraph and Telephone Corporation (NTT) digital communications network is estimated to be better than 300 ns rms at an advanced level, and 20 ns rms at final level.

Kihara, Masami↗

The Novel Nonlinear Adaptive Doppler Shift Estimation Technique and the Coherent Doppler Lidar System Validation Lidar

The signal processing aspect of a 2-m wavelength coherent Doppler lidar system under development at NASA Langley Research Center in Virginia is investigated in this paper. The lidar system is named VALIDAR (validation lidar) and its signal processing program estimates and displays various wind parameters in real-time as data acquisition occurs. The goal is to improve the quality of the current estimates such as power, Doppler shift, wind speed, and wind direction, especially in low signal-to-noise-ratio (SNR) regime. A novel Nonlinear Adaptive Doppler Shift Estimation Technique (NADSET) is developed on such behalf and its performance is analyzed using the wind data acquired over a long period of time by VALIDAR. The quality of Doppler shift and power estimations by conventional Fourier-transform-based spectrum estimation methods deteriorates rapidly as SNR decreases. NADSET compensates such deterioration in the quality of wind parameter estimates by adaptively utilizing the statistics of Doppler shift estimate in a strong SNR range and identifying sporadic range bins where good Doppler shift estimates are found. The authenticity of NADSET is established by comparing the trend of wind parameters with and without NADSET applied to the long-period lidar return data.

Beyon, Jeffrey Y.↗