Search NASA⌕ Search

SEARCH · Search NASA

Results for “FAC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Comprehensive Measurement of Microbial Burden in Nutrient-Deprived Cleanrooms

Spacecraft surfaces that are destined to land on potential life-harboring celestial bodies are required to be rigorously cleaned and continuously monitored for spore bioburden as a proxy for spacecraft cleanliness. The NASA standard spore assay (NSA), used for spacecraft bioburden estimates, specifically measures spores that are cultivable, aerobic, resistant to heat shock, and grow at 30˚C in a nutrient-rich medium. Since the vast majority of microorganisms cannot be cultivated using the NSA assay, it is necessary to utilize state-of-the art molecular techniques to better understand the presence of all viable microorganisms, not just those measured with the NSA. In this study, the nutrient-deprived low biomass cleanrooms, where spacecraft are assembled, were used as a surrogate to spacecraft surfaces to measure the ratio of NSA spores in relation to the total viable microorganism population to compare with a 2006 space studies report that estimates that for every 1 spore there is approximately 50,000 viable organisms. Ninety-eight surface wipe samples were collected from the spacecraft assembly facility (SAF) cleanroom at the Jet Propulsion Laboratory (JPL) over a 6-month period. The samples were processed and analyzed using classical microbiology along with molecular assays. Traditional microbiology plating methods were used to determine the cultivable bacterial, fungal, and spore populations. Molecular assays were used to determine the total organisms (TO, dead and live) and the viable organisms (VO, live). The TO was measured using adenine triphosphate (ATP) and quantitative polymerase chain reaction (qPCR) assays. The VO was measured using internal ATP, propidium monoazide (PMA)-qPCR, and flow cytometry (after staining for viable microorganisms) assays. Based on the results, it was possible to establish a ratio between spore counts and VO for each viability assay. The ATP based spore to VO ratio ranged from 149 – 746 and the bacterial PMA-qPCR assay based ratio ranged from 314 – 1491 VO. The most conservative estimate came from FACS, which estimated the ratio to be 12,091 VO per 1 NSA spore. Since archaeal (<1%) and fungal (~2%) populations were negligible, the spore to VO ratios were based on bacterial population estimates. The most conservative ratio from this study can be used as a replacement for the SSB estimate on nutrient-deprived (oligotrophic) desiccated spacecraft surfaces, to estimate the VO from NSA measurements without utilizing state-of-the art molecular methods that are costly and require more biomass than is typically found of spacecraft surfaces.

Venkateswaran, Kasthuri↗

Using Reinforcement Learning to Design Missed Thrust Resilient Trajectories

From ion thrusters to solar sails, spacecraft continue to adopt new and more efficient forms of propulsion. As these low-thrust propulsion meth- ods have become more prevalent, new challenges have arisen. Depending on the mission, low-thrust propulsion elements may need to thrust con- tinuously for days/months. During these thrusting periods, external fac- tors, such as a micro-meteoroid impact or a software glitch, may cause the spacecraft to prematurely cease its thrust stage. Half of all deep space missions enter a safe mode where they cannot thrust every four months. These missed thrust events can result in the complete loss of a space- craft for time-dependent trajectories like planetary rendezvous. This paper demonstrates how neural networks, trained using reinforcement learning, can autonomously correct for missed thrust events during an interplanetary trajectory.

Laipert, Frank E.↗

Dayside Transient Phenomena and Their Impact on the Magnetosphere and Ionosphere

Dayside transients, such as hot flow anomalies, foreshock bubbles, magnetosheath jets, flux transfer events, and surface waves, are frequently observed upstream from the bow shock, in the magnetosheath, and at the magnetopause. They play a significant role in the solar wind-magnetosphere-ionosphere coupling. Foreshock transient phenomena, associated with variations in the solar wind dynamic pressure, deform the magnetopause, and in turn generates field-aligned currents (FACs) connected to the auroral ionosphere. Solar wind dynamic pressure variations and transient phenomena at the dayside magnetopause drive magnetospheric ultra low frequency (ULF) waves, which can play an important role in the dynamics of Earth’s radiation belts. These transient phenomena and their geoeffects have been investigated using coordinated in-situ spacecraft observations, spacecraft-borne imagers, ground-based observations, and numerical simulations. Cluster, THEMIS, Geotail, and MMS multi-mission observations allow us to track the motion and time evolution of transient phenomena at different spatial and temporal scales in detail, whereas ground-based experiments can observe the ionospheric projections of transient magnetopause phenomena such as waves on the magnetopause driven by hot flow anomalies or flux transfer events produced by bursty reconnection across their full longitudinal and latitudinal extent. Magnetohydrodynamics (MHD), hybrid, and particle-in-cell (PIC) simulations are powerful tools to simulate the dayside transient phenomena. This paper provides a comprehensive review of the present understanding of dayside transient phenomena at Earth and other planets, their geoeffects, and outstanding questions.

Bow shock↗

Curating AI-Ready Datasets for Equity and Environmental Justice: A Data-Centric AI Case Study

An equitable and environmentally just community is essentialin order to avoid disproportionate burden borne by vulnerablecommunities. This need becomes pressing in the aftermathof an extreme event such as disaster or hazard when it is diffi-cult for the governing bodies to implement resource allocationas per the need. Artificial Intelligence (AI) algorithms canhelp surface Equity and Environmental Justice (EEJ) issueswhen trained on EEJ datasets. However, curating AI-readyEEJ training datasets is challenging due to differences in fac-tors such as heterogeneity, resolution, modality, and level ofexpertise in labeling. Additionally, EEJ issues involve sensi-tive information where uncertainties and errors could degradethe performance of AI algorithms. For eg. Error in seasonalcrop yield information can highly affect the prediction of an-nual crop yield. To address these challenges, Data-centricAI (DCAI) methods are employed, which enhance AI algo-rithm performance even with limited training samples. DCAIprioritizes data quality, thereby reducing the adverse effectsof uncertainties and errors during the model training process.This research proposes a novel dataset and benchmark for an-alyzing the effect of the Maui Wildfire of 2023 for Equityand Environmental Justice (EEJ) issues. The proposed datasetaligns with the concepts of DCAI such as annotation quality,data preprocessing, privacy, feature engineering, governanceand provenance. We firmly believe that the proposed datasetwould lay a foundation to implement robust and reliable mod-ern AI algorithms for addressing EEJ issues.

Paridhi Parajuli↗

Quantifying the Ability of Magnetohydrodynamic Models to Reproduce Observed Birkeland Current and Auroral Electrojet Magnitudes

Although global magnetohydrodynamic (MHD) models have increased in sophistication and are now at the forefront of modeling Space Weather, there is still no clear understanding of how well these models replicate the observed ionospheric current systems. Without a full understanding and treatment of the ionospheric current systems, global models will have significant shortcomings that will limit their use. In this study we focus on reproducing observed seasonal interhemispheric asymmetry in ionospheric currents using the Space Weather Modeling Framework (SWMF). We find that SWMF does reproduce the linear relationship between the electrojets and the FACs, despite the underestimation of the currents’ magnitudes. Quantitatively, we find that at best SWMF is only capturing approximately 60% of the observed current. We also investigate how varying F10.7 effects the ionospheric potential and currents during the summer and winter. We find that simulations ran with higher F10.7 result in lower ionospheric potentials. Additionally, we find that the models do not always replicate the expected behavior of the currents with varying F10.7. This work points to a needed improvement in ionospheric conductance models.

Tre'Shunda James↗

Calculating the High-Latitude Ionospheric Electrodynamics Using A Machine Learning-Based Field-Aligned Current Model

We introduce a new framework called Machine Learning (ML) based Auroral Ionospheric electrodynamics Model (ML-AIM). ML-AIM solves a current continuity equation by utilizing the ML model of Field Aligned Currents of Kunduri et al. (2020, https://doi.org/10.1029/2020JA027908), the FAC-derived auroral conductance model of Robinson et al. (2020, https://doi.org/10.1029/2020JA028008), and the solar irradiance conductance model of Moen and Brekke (1993, https://doi.org/10.1029/92gl02109). The ML-AIM inputs are 60-min time histories of solar wind plasma, interplanetary magnetic fields (IMF), and geomagnetic indices, and its outputs are ionospheric electric potential, electric fields, Pedersen/Hall currents, and Joule Heating. We conduct two ML-AIM simulations for a weak geomagnetic activity interval on 14 May 2013 and a geomagnetic storm on 7–8 September 2017. ML-AIM produces physically accurate ionospheric potential patterns such as the two-cell convection pattern and the enhancement of electric potentials during active times. The cross polar cap potentials (ΦPC) from ML-AIM, the Weimer (2005, https://doi.org/10.1029/2004ja010884) model, and the Super Dual Auroral Radar Network (SuperDARN) data-assimilated potentials, are compared to the ones from 3204 polar crossings of the Defense Meteorological Satellite Program F17 satellite, showing better performance of ML-AIM than others. ML-AIM is unique and innovative because it predicts ionospheric responses to the time-varying solar wind and geomagnetic conditions, while the other traditional empirical models like Weimer (2005, https://doi.org/10.1029/2004ja010884) designed to provide a quasi-static ionospheric condition under quasi-steady solar wind/IMF conditions. Plans are underway to improve ML-AIM performance by including a fully ML network of models of aurora precipitation and ionospheric conductance, targeting its characterization of geomagnetically active times.

auroral electrodynamics↗

Comparison of Multisine Peak Factor Minimization Algorithms for Aircraft System Identification

Two phase-optimized multisine peak factor minimization algorithms are presented and evaluated. The first algorithm minimizes peak factor by iteratively clipping the peaks of generated multisine signals. The second algorithm optimizes peak factor indirectly through minimization of an approximation of the infinity norm of the multisine. Algorithm performance was evaluated as a function of different signal properties, including the number of harmonics, harmonic spacing, and number of snow harmonics (extra harmonics included for further reduction of the peak factor). The two algorithms are compared against results obtained by minimizing peak factor directly using a simplex algorithm, which has been a common approach when designing phase-optimized multisines for system identification flight tests. Sample results show that the clipping and infinity norm algorithms produced multisine signals with comparable peak factors that were lower than that of the simplex algorithm. However, the clipping algorithm runs an order of magnitude faster than the other two algorithms, which also makes it practical to repeat the algorithm multiple times to achieve even lower peak factors.

system identification↗

Comparison of Multisine Peak Factor Minimization Algorithms for Aircraft System Identification(Presentation)

Two phase-optimized multisine peak factor minimization algorithms are presented and evaluated. The first algorithm minimizes peak factor by iteratively clipping the peaks of generated multisine signals. The second algorithm optimizes peak factor indirectly through minimization of an approximation of the infinity norm of the multisine. Algorithm performance was evaluated as a function of different signal properties, including the number of harmonics, harmonic spacing, and number of snow harmonics (extra harmonics included for further reduction of the peak factor). The two algorithms are compared against results obtained by minimizing peak factor directly using a simplex algorithm, which has been a common approach when designing phase-optimized multisines for system identification flight tests. Sample results show that the clipping and infinity norm algorithms produced multisine signals with comparable peak factors that were lower than that of the simplex algorithm. However, the clipping algorithm runs an order of magnitude faster than the other two algorithms, which also makes it practical to repeat the algorithm multiple times to achieve even lower peak factors.

flight test↗

SLED-II: A New Method of RF Pulse Compression

In the SLED 1 method of RF pulse compression, two high Q resonators store energy from an RF source for a relatively long time interval (typically 3 to 5 J.1sec). Triggered by a reversal in RF phase, this stored energy is then released during a much shorter interval equal to the filling time of the accelerating structure. A peak power gain on the order of three and a compression efficiency on the order of 60% are typically attained. The shape of the output pulse is, however, a sharply decaying expo- nential. In SLED-II the two cavities are replaced by two lengths of resonant line, forming a Resonant Line SLED (RELS) and resulting in a flat output pulse. Therefore, RELS stages can be cascaded to give a greater peak power gain. Using two stages, a peak power gain greater than ten can be achieved with a reasonable compression efficiency. Unlike the BEC,2 the RELS compression fac- tor per stage is not limited to two, albeit at the expense of intrinsic efficiency. Like the BEC, it uses long lines rather than short cavities.

Farkas, Z.↗

Test Plan for the Second Reirradiation Heating Test of Fuel Particles from AGR 2 Compact 6-4-1

Post irradiation examination (PIE) and high-temperature heating tests of tristructural isotropic (TRISO)-coated fuel particles and compacts from the second Advanced Gas Reactor (AGR) irradiation experiment, AGR 2, are in progress. This test plan describes the reirradiation and subsequent high-temperature testing of loose fuel particles obtained from AGR 2 compact 6-4-1. Four of these particles will have been cracked, gamma counted, and re-irradiated in the Neutron Radiography (NRAD) reactor prior to the heating test. The heating test will involve heating the particles in the Fuel Accident Condition Simulator (FACS) furnace to a peak temperature of approximately 1600°C while collecting fission products released from the particles for post-heating test analysis. The intention of the test is to assess the retention of fission products in the fuel kernel. Reirradiation of the particles will allow a determination of the retention of short-lived fission products I-131 (t1/2 = 8.02 days) and Xe-133 (t1/2 = 5.2 days) in the kernel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Hydrogels for isotopic neutron emitters and antineutrino detection and related detection systems and methods

Scintillation compositions comprising a gadolinium compound and a scintillation compound in a polymer matrix precursor. The scintillation compound comprises strontium diiodide, fac-tris(2-phenylpyridine)iridium (Ir(ppy)3), a quinine compound, or combinations thereof, or 2-(4-biphenylyl)-5 phenyl-1,3,4-oxadiazole (PBD), 2-(4-tert-butylphenyl)-5-(4-phenylphenyl)-1,3,4-oxadiazole (b-PBD), 2,5-diphenyl oxazole (PPO), 1,4-bis(5-phenyloxazol-2-yl) benzene (POPOP), or combinations thereof. Hydrogels comprising the gadolinium compound and scintillation compound in a polymer matrix are also disclosed, as are related systems and methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-Radiation Induces Non-Small-Cell Lung Cancer Apoptosis by Upregulation of Axin Expression

Purpose: Axis inhibition (Axin) is an important negative regulator of the Wnt pathway. This study investigated the relationship between Axin expression and sensitivity to X-rays in non-small-cell lung cancer (NSCLC) to find a useful indicator of radiosensitivity. Methods and Materials: Tissue from NSCLC patients, A549 cells, and BE1 cells expressing Axin were exposed to 1-Gy of X-radiation. Axin and p53 expression levels were detected by immunohistochemistry and reverse transcription-PCR. Apoptosis was determined by TUNEL (terminal deoxynucleotidyl transferase-mediated dUTP nick end labeling) assay and FACS (fluorescence-activate cell sorter) analysis. Caspase-3 activity was determined by Western blotting. Phospho-JNK expression was determined by immunofluorescence. Results: The expression of Axin was significantly lower in NSCLC tissues than in normal lung tissues (p < 0.05). Axin expression correlates with differentiation, TNM staging, and lymph node metastasis of NSCLC (p < 0.05). Its expression negatively correlates with the expression of p53(mt) (p=0.000) and positively correlates with apoptosis (p=0.002). The prognosis of patients with high expression of Axin was better than those with low expression. X-radiation increases Axin expression in NSCLC tissue, and caspase-3 is significantly higher in samples in which Axin is increased (p < 0.05). Both X-radiation and Axin induce apoptosis of A549 and BE1 cells; however, the combination of the two enhances the apoptotic effect (p < 0.05). In A549 cells, inhibition of p53 blocks Axin-induced apoptosis, whereas in BE1 cells, the JNK pathway is required. Conclusions: Axin induces the p53 apoptotic pathway in cells where this pathway is intact; however, in cells expressing p53(mt), Axin induces apoptosis via the JNK pathway. Elevated Axin expression following X-ray exposure is a reliable indicator for determining the radiosensitivity of NSCLC.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Post-irradiation 1600°C Heating Test of AGR-1 UCO Fuel Kernels

Five bare kernels were selected from the U.S. Advanced Gas Reactor (AGR) 1 irradiation experiment Compact 5-3-1 to perform post-irradiation safety tests. The safety test involved heating the kernels in the Fuel Accident Condition Simulator (FACS) furnace in the inert atmosphere to a peak temperature of 1600°C and isothermally holding at this temperature for about 47 hours while collecting fission products released. This test was to assess the retention of fission products in bare kernels without the effects of the other TRISO layers (buffer, IPyC, SiC, and OPyC) or the graphitic matrix material. The bare kernels released nearly 100% of cesium and antimony, while they were able to maintain about 30% of europium, 50% of strontium, and the majority of cerium and ruthenium. In addition, about 48% of the calculated inventory of Kr-85 released during the test, indicating that kernels were capable of retaining a considerable fraction of fission gas K-85 during irradiation.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

2025 Intern Poster

The Hot Fuel Examination Facility (HFEF) at the Materials and Fuels Complex (MFC) houses the largest U.S. inert atmosphere hot cell for nuclear material research. Key features include the precision gamma scanning (PGS), Fuel Accident Condition Simulator (FACS), Neutron Radiography Reactor (NRAD), and the focus of this project, the Metallograph Loading Cell (MET Cell). The MET Cell performs tests on spent nuclear fuel, such as microhardness testing, microscopy, and neutron radiography. However, the MET Cell’s existing pressure and lighting control systems are outdated and inefficient, with inadequate documentation for system changes over time. This project aims to design a new automated control system for the MET Cell, ensuring longevity (minimum ten years), ease of troubleshooting/repair, and integration into the building monitoring system. The design process addressed challenges such as space restrictions, varied voltages within enclosures, sourcing new components, and security limitations. Compliance with NFPA 70, UL508A, MFC Physical Security, and INL Engineering standards was essential. The project involves repurposing an existing PLC to manage lighting and pressure control using digital and analog signals, simplifying wiring, and ensuring thorough documentation for future reference.

42 - ENGINEERING↗

FGMS-poster

Idaho National Laboratory (INL) performs post irradiation examination (PIE) of tri-structural isotropic (TRISO)-coated particle fuel to help qualify it for high temperature gas cooled reactors. TRISO fuel compacts are re-irradiated in the Neutron Radiography Reactor (NRAD) to generate the short lived fission products needed for fission product release testing. The Fuel Accident Condition Simulator (FACS) furnace and newly added Screen Neutron Irradiated Fuel for Failure (SNIFF) furnace heat the compacts in helium to temperatures of up to 2,000°C, prompting fission product release—predominantly gaseous xenon and krypton isotopes and condensable products such as cesium—from failed particles. These released isotopes are transported to a fission gas monitoring system (FGMS 1 or FGMS 3), where they accumulate in cryogenic cold traps and are quantified using high-purity germanium (HPGe) detectors. The addition of SNIFF and FGMS 3 increases throughput by enabling simultaneous testing of multiple compacts. Furthermore, automated INL developed software provides continuous, near-real time monitoring of fission product inventories and manages the liquid nitrogen cooling of the traps. These system enhancements improve the efficiency, data quality, and testing capacity of TRISO fuel performance evaluations.

07 - ISOTOPES AND RADIATION SOURCES↗

Construction and Screening of Antigen Targeted Immune Yeast Surface Display Antibody Libraries

These protocols describe a yeast surface display-based process for the rapid selection of antibodies from immunized mice, eliminating the need for creating and screening hybridoma fusions. A yeast surface display library of single-chain antibody fragments (scFvs) is created from antigen-binding B cells from the splenocytes of immunized mice. The antigen targeted library is then screened for antigen specific scFv by magneticactivated cell sorting (MACS) and fluorescence-activated cell sorting (FACS). Library construction and screening can be accomplished in as little as 2 weeks, resulting in a panel of scFvs specific for the target antigen.

60 APPLIED LIFE SCIENCES↗