Search NASA⌕ Search

SEARCH · Search NASA

Results for “FERROMAGNETIC RESONANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Magnetic anisotropy in (Ga,Mn)As grown on vicinal GaAs: Effects of the orientation of microwave magnetic field

Ferromagnetic resonance (FMR) study of the magnetic anisotropy in epitaxial (Ga,Mn)As grown on vicinal GaAs is presented. The data collected in the growth plane reveal very limited dependence on the miscut angle {eta}, with a negligible effect of {eta} on the in-plane uniaxial anisotropy. In the out-of-plane configuration, the substrate misorientation has a pronounced influence on FMR, which features are partially explained with a phenomenological treatment of the atomic step-induced anisotropy. This simple model, however, does not account for the miscut-induced dependence of FMR on the orientation of microwave magnetic field, that is observed with the static field applied invariably along the growth direction.

36 MATERIALS SCIENCE↗

Magnetic Properties and Electronic Structure of Ni/C Multilayer Films

The magnetic properties of Ni/C multilayers were investigated using vibrating sample magnetometer and ferromagnetic resonance (FMR). Spin wave resonances were seen in FMR and the spin wave was found to be sustained through whole layers. The interlayer coupling constant was small pointing out a weak exchange coupling between Ni films through C spacers. The FMR linewidth, in parallel geometry, of the uniform mode decreases with the increase in Ni thickness from 30 to 300 Å which can be understood by considering interfacial effects. The magnetization decreases with decreasing Ni thickness due to the structural imperfections associated with the presence of Ni{sub 1−x}C{sub x} alloys at the interface. Density functional theory (DFT) has been performed to shed light on the decrease in magnetic moment at the interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanism of tailored magnetic anisotropy in amorphous Co{sub 68}Fe{sub 24}Zr{sub 8} thin films

The mechanism of tailored magnetic anisotropy in amorphous Co{sub 68}Fe{sub 24}Zr{sub 8} thin films was investigated by ferromagnetic resonance (FMR) on samples deposited without an applied magnetic field, with an out-of-plane field and an in-plane field. Analysis of FMR spectra profiles, high frequency susceptibility calculations, and statistical simulations using a distribution of local uniaxial magnetic anisotropy reveal the presence of atomic configurations with local uniaxial anisotropy, of which the direction can be tailored while the magnitude remains at an intrinsically constant value of 3.0(2) kJ/m{sup 3}. The in-plane growth field remarkably sharpens the anisotropy distribution and increases the sample homogeneity. The results benefit designing multilayer spintronic devices based on highly homogeneous amorphous layers with tailored magnetic anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Field-dependent perpendicular magnetic anisotropy in CoFeB thin films

We report ferromagnetic resonance measurements of perpendicular magnetic anisotropy in thin films of Ta/Co{sub 20}Fe{sub 60}B{sub 20}/MgO as a function of the Co{sub 20}Fe{sub 60}B{sub 20} layer thickness. The first and second order anisotropy terms show unexpectedly strong dependence on the external magnetic field applied to the system during the measurements. We propose strong interfacial spin pinning as a possible origin of the field-dependent anisotropy. Our results imply that high-field anisotropy measurements cannot be directly used for quantitative evaluation of zero-field performance parameters of CoFeB-based devices such as spin torque memory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ionic Liquid Gating Control of Spin Reorientation Transition and Switching of Perpendicular Magnetic Anisotropy

Electric field (E–field) modulation of perpendicular magnetic anisotropy (PMA) switching, in an energy–efficient manner, is of great potential to realize magnetoelectric (ME) memories and other ME devices. Voltage control of the spin–reorientation transition (SRT) that allows the magnetic moment rotating between the out–of–plane and the in–plane direction is thereby crucial. In this work, a remarkable magnetic anisotropy field change up to 1572 Oe is achieved under a small operation voltage of 4 V through ionic liquid (IL) gating control of SRT in Au/[DEME]+[TFSI] – /Pt/(Co/Pt) 2 /Ta capacitor heterostructures at room temperature, corresponding to a large ME coefficient of 378 Oe V –1 . As revealed by both ferromagnetic resonance measurements and magnetic domain evolution observation, the magnetization can be switched stably and reversibly between the out–of–plane and in–plane directions via IL gating. The key mechanism, revealed by the first–principles calculation, is that the IL gating process influences the interfacial spin–orbital coupling as well as net Rashba magnetic field between the Co and Pt layers, resulting in the modulation of the SRT and in–plane/out–of–plane magnetization switching. In conclusion, this work demonstrates a unique IL–gated PMA with large ME tunability and paves a way toward IL gating spintronic/electronic devices such as voltage tunable PMA memories.

36 MATERIALS SCIENCE↗

Microwave-Hydrothermal Synthesis of Y{sub 3}Fe{sub 5}O{sub 12} Nanoparticles: Sintering Temperature Effect on Structural, Magnetic and Dielectric Properties

Herein, we report a facile microwave-assisted hydrothermal method for the preparation of yttrium iron garnet (YIG, Y{sub 3}Fe{sub 5}O{sub 12})nanocrystals and realized the synergy between its structural and magnetic properties. The as-prepared powder thermal stability was characterized in detail by using thermogravimetric-differential thermal analysis (TG-DTA). The synthesized powder was microwave sintered at six different temperatures ranging from 973 to 1373 K for 60 min and characterized using X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). Magnetic properties were investigated by vibrating-sample magnetometer (VSM) and ferromagnetic resonance (FMR) studies. The frequency variation of dielectric and magnetic properties was measured in the frequency range of 100 kHz–1.8 GHz. The observed magnetic and dielectric parameters such as saturation magnetization, coercivity, permeability, linewidth, dielectric constant and magnetodielectric losses are strongly affected by sintering temperature. The saturation magnetization and coercivity of YIG were found in the range 14.4–28.0 emu/g and 35–87 Oe, respectively. Furthermore, the FMR linewidth decreases from 844 to 204 Oe. This analysis undoubtedly demonstrates that the synthesis method and sintering temperature have the prominent effect on the electrical and magnetic properties of YIG and would be very useful for the garnet-based microwave device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Challenges and opportunities for multi-functional oxide thin films for voltage tunable radio frequency/microwave components

There has been significant progress on the fundamental science and technological applications of complex oxides and multiferroics. Among complex oxide thin films, barium strontium titanate (BST) has become the material of choice for room-temperature-based voltage-tunable dielectric thin films, due to its large dielectric tunability and low microwave loss at room temperature. BST thin film varactor technology based reconfigurable radio frequency (RF)/microwave components have been demonstrated with the potential to lower the size, weight, and power needs of a future generation of communication and radar systems. Low-power multiferroic devices have also been recently demonstrated. Strong magneto-electric coupling has also been demonstrated in different multiferroic heterostructures, which show giant voltage control of the ferromagnetic resonance frequency of more than two octaves. This manuscript reviews recent advances in the processing, and application development for the complex oxides and multiferroics, with the focus on voltage tunable RF/microwave components. The over-arching goal of this review is to provide a synopsis of the current state-of the-art of complex oxide and multiferroic thin film materials and devices, identify technical issues and technical challenges that need to be overcome for successful insertion of the technology for both military and commercial applications, and provide mitigation strategies to address these technical challenges.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of ruthenium seed layer on the microstructure and spin dynamics of thin permalloy films

The spin dynamics and microstructure properties of a sputtered 12 nm Ni{sub 81}Fe{sub 19} thin film have been enhanced by the use of a ruthenium seed layer. Both the ferromagnetic resonance field and linewidth are enhanced dramatically as the thickness of ruthenium seed layer is increased. The surface anisotropy energy constant can also be largely tailored from 0.06 to 0.96 erg/cm{sup -2} by changing the seed layer thickness. The changes to the dynamics magnetization properties are caused by both ruthenium seed layer induced changes in the Ni{sub 81}Fe{sub 19} structure properties and surface topography properties. Roughness induced inhomogeneous linewidth broadening is also seen. The damping constant is highly tunable via the ruthenium thickness. This approach can be used to tailor both the structure and spin dynamic properties of thin Ni{sub 81}Fe{sub 19} films over a wide range. And it may benefit the applications of spin dynamics and spin current based devices.

36 MATERIALS SCIENCE↗

Magnetic and elastic anisotropy in magnetorheological elastomers using nickel-based nanoparticles and nanochains

Nickel (Ni) based nanoparticles and nanochains were incorporated as fillers in polydimethylsiloxane (PDMS) elastomers and then these mixtures were thermally cured in the presence of a uniform magnetic field. In this way, macroscopically structured-anisotropic PDMS-Ni based magnetorheological composites were obtained with the formation of pseudo-chains-like structures (referred as needles) oriented in the direction of the applied magnetic field when curing. Nanoparticles were synthesized at room temperature, under air ambient atmosphere (open air, atmospheric pressure) and then calcined at 400 °C (in air atmosphere also). The size distribution was obtained by fitting Small Angle X-ray Scattering (SAXS) experiments with a polydisperse hard spheres model and a Schulz-Zimm distribution, obtaining a size distribution centered at (10.0 ± 0.6) nm with polydispersivity given by σ = (8.0 ± 0.2) nm. The SAXS, X-ray powder diffraction, and Transmission Electron Microscope (TEM) experiments are consistent with single crystal nanoparticles of spherical shape (average particle diameter obtained by TEM: (12 ± 1) nm). Nickel-based nanochains (average diameter: 360 nm; average length: 3 μm, obtained by Scanning Electron Microscopy; aspect ratio = length/diameter ∼ 10) were obtained at 85 °C and ambient atmosphere (open air, atmospheric pressure). The magnetic properties of Ni-based nanoparticles and nanochains at room temperature are compared and discussed in terms of surface and size effects. Both Ni-based nanoparticles and nanochains were used as fillers for obtaining the PDMS structured magnetorheological composites, observing the presence of oriented needles. Magnetization curves, ferromagnetic resonance (FMR) spectra, and strain-stress curves of low filler's loading composites (2% w/w of fillers) were determined as functions of the relative orientation with respect to the needles. The results indicate that even at low loadings it is possible to obtain magnetorheological composites with anisotropic properties, with larger anisotropy when using nanochains. For instance, the magnetic remanence, the FMR field, and the elastic response to compression are higher when measured parallel to the needles (about 30% with nanochains as fillers). Analogously, the elastic response is also anisotropic, with larger anisotropy when using nanochains as fillers. Therefore, all experiments performed confirm the high potential of nickel nanochains to induce anisotropic effects in magnetorheological materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Suppression of spin pumping between Ni{sub 80}Fe{sub 20} and Cu by a graphene interlayer

We compare ferromagnetic resonance measurements of Permalloy Ni{sub 80}Fe{sub 20} (Py) films sputtered onto Cu(111) films with and without a graphene (Gr) interlayer grown by chemical vapor deposition before Py deposition. A two-angle sputtering method ensured that neither Gr nor Py was degraded by the sample preparation process. We find the expected damping enhancement from spin pumping for the Py/Cu case and no detectable enhancement for the Py/Gr/Cu case. Since damping is sensitive to effects other than spin pumping, we used magnetometry to verify that differences in Py magnetostatic properties are not responsible for the difference in damping. We attribute the suppression of spin pumping in Py/Gr/Cu to the large contact resistance of the Gr/Cu interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large spin-to-charge conversion in ultrathin gold-silicon multilayers

Investigation of the spin Hall effect in gold has triggered increasing interest over the past decade, since gold combines the properties of a large bulk spin-diffusion length and strong interfacial spin-orbit coupling. However, discrepancies between the values of the spin Hall angle of gold reported in the literature have brought into question the microscopic origin of the spin Hall effect in Au. Here, we investigate the thickness dependence of the effective spin-charge conversion efficiency in single Au films and ultrathin Au/Si multilayers by nonlocal transport and spin-torque ferromagnetic resonance measurements. We show that the inferred effective spin-charge conversion efficiency is strongly enhanced in ultrathin Au/Si multilayers, reaching exceedingly large values of 0.99 ± 0.34 when the thickness of the individual Au layers is scaled down to 2 nm. These findings reveal the coexistence of a strong interfacial spin-to-charge conversion effect, which becomes dominant in ultrathin Au, and bulk spin Hall effect with a relatively low bulk spin Hall angle of 0.012 ± 0.005. Furthermore, our experimental results suggest the key role of the intrinsic spin Hall effect enhancement along with a strong interfacial spin-orbit coupling-related effect in the large spin-to-charge conversion in ultrathin Au.

36 MATERIALS SCIENCE↗

Direct current effects on high-frequency properties of patterned permalloy thin films.

We have investigated experimentally direct current (dc) effects on high-frequency properties of two different permalloy (Py) submicrometer patterns of 0.24 mum and 0.55 mum width, 10 mum length, and 100 nm thickness. The natural ferromagnetic resonance (FMR) frequencies for the two samples are about 8.5 and 11.5 GHz. A 50 mA dc produces a FMR frequency reduction of about 1 GHz in both samples. We extracted susceptibility spectra for the samples from the measurement data. We studied inductance variations of Py embedded transmission lines for different dc levels. With 50 mA dc, the operational frequencies of the inductances decreased by 9% and 12.5%. We also tested effects of magnetic fields generated by external magnets on the submicrometer patterns for comparison. To obtain the same magnetization rotation angle, the external magnetic field needs to be about five times larger than the Ampere field created by the direct current. This behavior is unique and may be associated with the increased thermal energy from the Joule heating effects.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Non-proportionality of magnetic anisotropy and damping in CoFeB/MgO-based systems

We study the relationship between anisotropy K and damping α in MgO/CoFeB/Ta/CoFeB/MgO/cap films using vector network analyzer ferromagnetic resonance. Capping the stack with Ta and changing the thickness of the top MgO layer allow us to create significant variations in anisotropy while keeping the thickness and process conditions of the magnetic layer constant. The change in anisotropy can be attributed to the degradation of the CoFeB/MgO interface due to Ta intermixing with MgO upon deposition. This hypothesis is supported by measurements of similar samples with the bottom MgO thickness varied instead, which exhibit no significant change in anisotropy. This method of varying K allows identifying a regime where a spin reorientation transition occurs while α remains constant, proving the non-proportionality of K and α in perpendicular CoFeB/MgO systems. The effects of changing the capping layer material, notably Ru, are also discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Annealing influence on the Gilbert damping parameter and the exchange constant of CoFeB thin films

We present a study of the influence of the annealing temperature T{sub a} on the magnetic properties of Co{sub 40}Fe{sub 40}B{sub 20} thin films. Using a vector network analyzer ferromagnetic resonance (VNA-FMR) setup and the magneto-optical Kerr effect, the dependence of the Gilbert damping parameter α, the exchange constant A, the saturation magnetization as well as the coercive field and the Kerr signal on T{sub a} is reported. Additionally, the correlation with the crystalline properties of the films studied by X-ray diffractometry is discussed. We found that while the damping parameter α and the coercive field show sharp changes starting at a certain T{sub a} value, the exchange constant A and the Kerr signal show a steady evolution. A differential modification of the film surface compared to the bulk is discussed as a possible reason. In any case, we found that the low damping values are preserved at the first onset of crystallization.

36 MATERIALS SCIENCE↗

Tunable spin wave spectra in two-dimensional Ni{sub 80}Fe{sub 20} antidot lattices with varying lattice symmetry

Ferromagnetic antidot lattices are important systems for magnetic data storage and magnonic devices, and understanding their magnetization dynamics by varying their structural parameters is an important problems in magnetism. Here, we investigate the variation in spin wave spectrum in two-dimensional nanoscale Ni{sub 80}Fe{sub 20} antidot lattices with lattice symmetry. By varying the bias magnetic field values in a broadband ferromagnetic resonance spectrometer, we observed a stark variation in the spin wave spectrum with the variation of lattice symmetry. The simulated mode profiles showed further difference in the spatial nature of the modes between different lattices. While for square and rectangular lattices extended modes are observed in addition to standing spin wave modes, all modes in the hexagonal, honeycomb, and octagonal lattices are either localized or standing waves. In addition, the honeycomb and octagonal lattices showed two different types of modes confined within the honeycomb (octagonal) units and between two such consecutive units. Simulated internal magnetic fields confirm the origin of such a wide variation in the frequency and spatial nature of the spin wave modes. The tunability of spin waves with the variation of lattice symmetry is important for the design of future magnetic data storage and magnonic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced magnetic damping in La{sub 0.7}Sr{sub 0.3}MnO{sub 3} capped by normal metal layer

La{sub 0.7}Sr{sub 0.3}MnO{sub 3}(LSMO) and Pt capped La{sub 0.7}Sr{sub 0.3}MnO{sub 3} 20 nm thick films have been grown on SrTiO{sub 3} substrates by pulsed laser deposition. Microstrip line ferromagnetic resonance (MS-FMR) technique is then used to investigate their magnetic dynamic properties and to particularly measure the damping constant based on the frequency dependence of microwave absorption linewidth. The results show that the effective damping constant of LSMO(20nm)/Pt(5.5nm) is three times larger than that of LSMO(20nm) and the films present weak in-plane uniaxial anistropy. The enhancement of the magnetic damping constant due to the capping of Pt is the manifestaction of the generation of spin current in Pt layer. Furthermore, the spin current induces an inverse spin Hall effect (ISHE) in LSMO(20nm)/Pt(5.5nm) system, measured using the FMR in cavity with 9.8 GHz excitation frequency. The linear dependence of ISHE on microwave power validates the mechenism of spin pumping in this bilayer system.

36 MATERIALS SCIENCE↗

Moderate positive spin Hall angle in uranium

We report measurements of spin pumping and the inverse spin Hall effect in Ni{sub 80}Fe{sub 20}/uranium bilayers designed to study the efficiency of spin-charge interconversion in a super-heavy element. We employ broad-band ferromagnetic resonance on extended films to inject a spin current from the Ni{sub 80}Fe{sub 20} (permalloy) into the uranium layer, which is then converted into an electric field by the inverse spin Hall effect. Surprisingly, our results suggest a spin mixing conductance of order 2 × 10{sup 19} m{sup −2} and a positive spin Hall angle of 0.004, which are both merely comparable with those of several transition metals. These results thus support the idea that the electronic configuration may be at least as important as the atomic number in governing spin pumping across interfaces and subsequent spin Hall effects. In fact, given that both the magnitude and the sign are unexpected based on trends in d-electron systems, materials with unfilled f-electron orbitals may hold additional exploration avenues for spin physics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Layer-dependent spin-orbit torques generated by the centrosymmetric transition metal dichalcogenide β–MoTe 2

Single-crystal materials with sufficiently low crystal symmetry and strong spin-orbit interactions can be used to generate novel forms of spin-orbit torques on adjacent ferromagnets, such as the out-of-plane antidamping torque previously observed in WTe 2 /ferromagnet heterostructures. Here, we present measurements of spin-orbit torques produced by the low-symmetry material β-MoTe 2 , which, unlike WTe 2 , retains bulk inversion symmetry. Here, we measure spin-orbit torques on β-MoTe 2 /Permalloy heterostructures using spin-torque ferromagnetic resonance as a function of crystallographic alignment and MoTe 2 thickness down to the monolayer limit. We observe an out-of-plane antidamping torque with a spin-torque conductivity as strong as 1/3 of that of WTe 2 , demonstrating that the breaking of bulk inversion symmetry in the spin-generation material is not a necessary requirement for producing an out-of-plane antidamping torque. We also measure an unexpected dependence on the thickness of the β-MoTe 2 —the out-of-plane antidamping torque is present in MoTe 2 /Permalloy heterostructures when the β-MoTe 2 is a monolayer or trilayer thick, but goes to zero for devices with bilayer β-MoTe 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗