Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flutter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Flutter Prediction Report in Support of the High Angle Working Group at the Third Aeroelastic Prediction Workshop

This paper presents a summary of the computational flutter results associated with the AIAA third Aeroelastic Prediction Workshop (AePW-3) High Angle Working Group (HAWG). The computational results are compared against the experimental data collected during the Pitch and Plunge Apparatus (PAPA) Benchmark Supercritical Wing (BSCW) test campaign conducted in the Transonic Dynamics Tunnel (TDT) at NASA Langley Research Center thirty years ago. During that test several flutter points were identified at transonic conditions. One of these points, specifically near Mach 0.8 and 5° angle of attack, became a focal point of the computational challenge with in HAWG. Various fidelity time-domain, Reduced Order Model (ROM) and Linearized Frequency Domain (LFD) methods were used by seven participating teams. While there are encouraging trends in the computational results, the range of the predicted flutter dynamic pressure is still quite large due to the stall flutter mechanism. A description of each participating team’s software and methods is included.

Pawel Chwalowski↗
NASA NTRS2016

Adaptive Modal Identification for Flutter Suppression Control

In this paper, we will develop an adaptive modal identification method for identifying the frequencies and damping of a flutter mode based on model-reference adaptive control (MRAC) and least-squares methods. The least-squares parameter estimation will achieve parameter convergence in the presence of persistent excitation whereas the MRAC parameter estimation does not guarantee parameter convergence. Two adaptive flutter suppression control approaches are developed: one based on MRAC and the other based on the least-squares method. The MRAC flutter suppression control is designed as an integral part of the parameter estimation where the feedback signal is used to estimate the modal information. On the other hand, the separation principle of control and estimation is applied to the least-squares method. The least-squares modal identification is used to perform parameter estimation.

Aeroelasticity↗
NASA NTRS2024

Tail-Cone Thruster Fan Rotor Flutter Analysis

The aeroelastic stability of a tail cone thruster fan was analyzed for three structural modes and various nodal diameter patterns. Computational fluid dynamics modeling with blade vibrations was used in the analyses performed at design (peak-efficiency) and two near-stall conditions at the design rotational speed. Aerodynamic damping was used to assess flutter since this integrally bladed rotor design will have minimal structural damping. Aerodynamic damping was found to be low at the design condition. For the first mode, aerodynamic damping was seen to decrease towards stall, vanishing for a zero nodal diameter pattern. Further decrease in mass flow led to negative aerodynamic damping (flutter) for the first and second nodal diameters in the near stall condition. The flowfield at this lowest mass flow rate exhibited some additional unsteadiness at higher frequency. The sensitivity of results to time step and amplitudes of vibration was examined and found to be very satisfactory. The largest uncertainty in the results comes from the observed sensitivity of the aerodynamic damping to details of the variation of grid deformations in the blade passage mesh from the blade passage to the boundaries. For the parametric variations analyzed, the calculated aerodynamic damping is lower if the grid deformations near the blade surface are higher. Further work is needed to understand the cause of this sensitivity and find possible solutions to reduce the effects on flutter predictions.

Fan↗
NASA NTRSDate not supplied

Flutter and Stochastic Gust Constraint Studies of the Undeflected CRM using MPhys

Aircraft design must ultimately address gust and flutter characteristics to achieve airworthiness. As modern aircraft continue to become more lightweight and flexible, these aeroelastic phenomena are more likely to drive the design process and should thus be considered early. Designing for ride quality due to typical gust spectra is also of interest to ensure a smooth passenger experience. The present work demonstrates the new implementation of stochastic gust constraints in MPhys/OpenMDAO, in addition to flutter and static stress constraints, among others. Design studies are shown for the NASA Common Research Model, including both fuel burn minimization as well as multiobjective optimization of fuel burn and landing gross weight. Two sets of optimization problems are covered, differing mainly by the gust quantity of interest, which include tip displacement and root bending moment. Fuel burn penalties imposed by the flutter and gust constraints are also discussed.

aeroelasticity↗
NASA NTRSDate not supplied

Gradient-Based Optimization of the Common Research Model Wing Subject to CFD-Based Gust and Flutter Constraints

The linearized frequency-domain method was recently implemented in the stabilized finite element solver in NASA’s FUN3D code. Previous work by the authors used this method for enforcing flutter constraints during gradient-based optimizations. More recently, the solver was expanded to account for continuous (also known as stochastic) gust responses. This paper expands on recent Common Research Model wing optimization work, which demonstrated gradient-based optimization with flutter and stochastic gust constraints, among others. While that work utilized FUN3D for static aeroelastic solutions but relied on doublet lattice aerodynamics for gust and flutter responses, the present work replaces these unsteady aerodynamic analyses with those of FUN3D’s linearized frequency-domain solver. With analytic derivatives available, gradient-based optimization is performed through the use of the OpenMDAO/MPhys libraries with over 700 shape, structural, and aerodynamic design variables and over 10 nonlinear constraints. Comparisons of analysis results and optimized designs are made between doublet lattice and linearized frequency-domain solutions.

aeroelasticity↗
DOE OSTI2025

Redesign of the Timeline Generator at Fermilab using a web-based Flutter Application, GraphQL API and an IOC

Redesign of the Timeline Generator at Fermilab using a web-based Flutter application, GraphQL API and an IOC ABSTRACT = The control system at Fermilab is undergoing an evolution with a shift towards web-based applications with connections to the EPICS infrastructure. The Timeline Generator (TLG) is an application that serves to coordinate events across the lab using different timing links. These links include the Tevatron clock (TCLK), a 10 MHz serial link with events encoded at 20Hz and Ma-chine Data (MDAT), a communication link with states encoded at 720Hz. This paper covers the redesign of the major components of the TLG. This includes a web-based Flutter application for building timelines. A placement service is in use that has a GraphQL interface and uses a timeline input to compute a schedule of events and states. The Flutter application sends this computed schedule to the TLG IOC via a GraphQL interface to the Data Pool Manager (DPM). The TLG IOC runs on an Arria FPGA, the Accelerator Clock Generator (ACLK-GEN), which is responsible for writing the events and states on to the different timing links.

Carmichael, Linden [Fermilab]↗
NASA NTRS1960

Flutter Investigation of 60 Degree to 80 Degree Delta-Planform Surfaces at a Mach Number of 7.0

The flutter characteristics of a series of half-span delta surfaces which had leading-edge sweep angles ranging from 60 degrees to 80 degrees were investigated in helium flaw at a Mach number of 7.0 in the Langley hypersonic aeroelasticity tunnel. For each value of sweep angle both wedge and double-wedge airfoil sections were tested at two pitch-axis positions, The models were mounted so that a rigid-body flapping-pitching type of flutter was encountered. Analysis of the results and comparison with theory show that the wedge models are more stable than the corresponding double-wedge models; the pitch-axis location at or near the center of gravity is more stable than the more forward location; the effects of leading-edge sweep angle on the flutter characteristics appear to be small; and an uncoupled-mode piston-theory analysis gave the best agreement with the experimental results.

Hannah, M. E.↗
NASA NTRS1972

Stall flutter analysis.

An analysis of unsteady airfoil stall and stall flutter is presented that is based on a series of approximations. Unsteady aerodynamic characteristics are related theoretically to static aerodynamic characteristics. Preliminary results show good agreement with experimental dynamic stall data. The analysis is applied to determine the boundaries for stall flutter, particularly for the straight wing of one candidate space-shuttle configuration. As formulated, the analysis should provide a conservative estimate - i.e., the predicted stall flutter region is slightly larger than the expected one, as demonstrated by comparison with experiments.

Ericsson, L. E.↗
NASA NTRS1973

An automated procedure for computing flutter eigenvalues.

A new, fast and economical automated procedure for implementing the traditional V-g method of flutter solution is described. The procedure requires as input the generalized aerodynamic forces for a range of reduced frequencies obtained from an aerodynamic program. These aerodynamic forces are interpolated with respect to reduced frequency using a newly developed, partially tabulated cubic spline that is both fast in execution and economical in storage. The flutter solution is then obtained using an eigenvalue routine that has been developed to take advantage of the parametric nature of the V-g type of solution. Furthermore, the routine takes care of the fundamental and troublesome problem of properly sorting the output eigenvalues. By solving the root-sorting problem, the interpolation for flutter crossings and automatic plotting are accomplished efficiently. The computational techniques used in this new program are described and some sample results are given.

Desmarais, R. N.↗
NASA NTRS1973

Parametric studies of the wing flutter behavior of a STOL transport.

A computer study was conducted to evaluate the effects of variations in the principal structural parameters on the wing flutter behavior of a four-engine STOL transport configuration having relatively low inplane wing stiffness and heavy engines. The wing structure was represented by a finite-element model which included the coupling between inplane and out-of-plane motion of the wing induced by the offset engine masses. The parameters which were varied were engine mass, pylon stiffness, and the inplane stiffness of the wing. It was found that the value of inplane stiffness for best flutter performance lies substantially below the range encountered in conventional designs. For engine weights in the medium-to-heavy range, the best inplane stiffness provided a dramatic improvement in flutter performance over that for infinite inplane stiffness, while for the lightest engines the improvement was moderate.

Kyser, A. C.↗
NASA NTRS1973

Analysis of stall flutter of a helicopter rotor blade.

A study of rotor blade aeroelastic stability was carried out, using an analytic model of a two-dimensional airfoil undergoing dynamic stall and on elastomechanical representation including flapping, flapwise bending and torsional degrees of freedom. Results for a hovering rotor demonstrated that the models used are capable of reproducing both classical and stall flutter. The minimum rotor speed for the occurrence of stall flutter in hover was found to be determined from coupling between torsion and flapping. Instabilities analogous to both classical and stall flutter were found to occur in forward flight. However, the large stall-related torsional oscillations which commonly limit aircraft forward speed appear to be the response to rapid changes in aerodynamic moment which accompany stall and unstall, rather than the result of an aeroelastic instability.

Crimi, P.↗
NASA NTRS1973

Large amplitude flutter of a low aspect ratio panel at low supersonic speeds comparison of theory and experiment

Flutter boundaries, as well as flutter limit cycle amplitudes, frequencies and stresses were computed for a panel of length-width ratio 4.48 exposed to applied in-plane and transverse loads. The Mach number range was 1.1 to 1.4. The method used involved direct numerical integration of modal equations of motion derived from the nonlinear plate equations of von Karman, coupled with linearized potential flow aerodynamic theory. The flutter boundaries agreed reasonably well with experiment, except when the in-plane loading approached the buckling load. Structural damping had to be introduced, to produce frequencies comparable to the experimental values. Attempts to compute panel deflections or stress at a given point met with limited success. There is some evidence, however, that deflection and stress maxima can be estimated with somewhat greater accuracy.

Ventres, C. S.↗
NASA NTRS1973

Subsonic flutter analysis addition to NASTRAN

A subsonic flutter analysis capability has been developed for NASTRAN, and a developmental version of the program has been installed on the CDC 6000 series digital computers at the Langley Research Center. The flutter analysis is of the modal type, uses doublet lattice unsteady aerodynamic forces, and solves the flutter equations by using the k-method. Surface and one-dimensional spline functions are used to transform from the aerodynamic degrees of freedom to the structural degrees of freedom. Some preliminary applications of the method to a beamlike wing, a platelike wing, and a platelike wing with a folded tip are compared with existing experimental and analytical results.

Doggett, R. V., Jr.↗
NASA NTRS1974

Flutter suppression and gust alleviation using active controls

The effects of active controls on the suppression of flutter and gust alleviation of two different types of subsonic aircraft (the Arava, twin turboprop STOL transport, and the Westwind twin-jet business transport) are investigated. The active controls are introduced in pairs which include, in any chosen wing strip, a leading-edge (LE) control and a trailing-edge (TE) control. Each control surface is allowed to be driven by a combined linear-rotational sensor system, located on the activated strip. The control law, which translates the sensor signals into control surface rotations, is based on the concept of aerodynamic energy. The results indicate the extreme effectiveness of the active systems in controlling flutter. A single system spanning 10% of the wing semispan made the Arava flutter-free, and a similar active system, for the Westwind aircraft, yielded a reduction of 75% in the maximum bending moment of the wing and a reduction of 90% in the acceleration of the cg of the aircraft. Results for simultaneous activation of several LE - TE systems are presented. Further work needed to bring the investigation to completion is also discussed.

Nissim, E.↗
NASA NTRS1974

Analysis of wing-body interaction flutter for a preliminary space shuttle design

Subsonic flutter analyses for a preliminary space shuttle design were performed to determine the effect of wing-body aerodynamic interaction on the vehicle flutter speed. It was found that the proximity of the large bodies of the shuttle to the wing reduces critical flutter speed by 11%. Aerodynamic reflection off the bodies is the dominant interaction effect while aerodynamic forces caused by body motion are of secondary importance in most cases. The analyses employed a doublet-lattice representation of the space shuttle, where in the wing and body surfaces were modeled by a lattice of nonplanar lifting surface elements. Axial singularities were introduced to account for body incidence, volume, and camber (slender body) effects. A series of studies on the placement and number of these elements was performed to ensure convergence of the results.

Chipman, R. R.↗
NASA NTRS1975

Structural optimization with flutter speed constraints using maximized step size

A procedure is presented for the minimization of structural mass while satisfying flutter speed constraints. The procedure differs from other optimization methods in that the flutter speed is exactly satisfied at each resizing step, and the step size is determined by a direct minimization of the objective function (mass) for each set of flutter derivatives calculated. In conjunction with this method, a new move vector is suggested which results in a very efficient resizing procedure.

Oconnell, R. F.↗
NASA NTRS1975

Weight minimization of structures for fixed flutter speed via an optimality criterion

A rigorous optimality criterion is derived and a hybrid weight-reduction algorithm developed for the weight minimization of lifting surfaces with a constraint on flutter speed. The weight-reduction algorithm incorporates a simple recursion formula derived from the optimality criterion. Monotonic weight reduction is accomplished by dynamically adjusting a parameter in the recursion formula so as to achieve a predetermined weight decrease. The algorithm thus combines the simplicity of optimality-criterion methods with the convergence characteristics of mathematical-programming methods. The imposition of the flutter constraint is simplified by forcing to zero the imaginary part of the flutter eigenvalue, with the airspeed fixed. Four examples are discussed. The results suggest that significant improvements in efficiency are possible, in comparison with techniques based purely on mathematical programming.

Segenreich, S. A.↗