Search NASA⌕ Search

SEARCH · Search NASA

Results for “Forcing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Influence of spin rate on side force of an axisymmetric body

Results are presented for an experimental study in which a 10-deg half-angle pointed cone model 57.9 cm long and made of magnesium (for lightness and minimization of inertial effects) is spun at several rates about its axis of symmetry. The model is spun in both directions, but most of the data presented are for the counterclockwise rotation. The resulting side force is recorded on an oscillograph. It is shown that the side force observed occurs under conditions of spin about the longitudinal axis, and that the general shape of the side-force curve with roll position does not depend strongly on spin rate. However, the peak-to-peak value of side force decreases substantially with spin rate, suggesting that the vortices producing the side force require a significant amount of time to change position and/or strength.

Kruse, R. L.↗
NASA NTRS1978

A study of the effect of forcing function characteristics on human operator dynamics in manual control

The effect of the spectrum of the forcing function on the human pilot dynamics in manual control was investigated. A simple compensatory tracking experiment was conducted, where the controlled element was of a second-order dynamics and the forcing function was a random noise having a dominant frequency. The dominant frequency and the power of the forcing function were two variable parameters during the experiment. The results show that the human pilot describing functions are dependent not only on the dynamics of the controlled element, but also on the characteristics of the forcing function. This suggests that the human pilot behavior should be expressed by the transfer function taking into consideration his ability to sense and predict the forcing function.

Washizu, K.↗
NASA NTRS1978

Finite element modeling of stress in the Nazca plate - Driving forces and plate boundary earthquakes

The state of stress within the Nazca plate due to plate driving forces and large plate boundary earthquakes has been analyzed by applying a finite element method using the wave front solution technique to models of the intraplate stress field in a single plate using a refined grid. Although only static elastic models have been explicitly calculated, certain limiting cases of an elastic plate over a viscous asthenosphere were also treated. A state of nearly east-west compression inferred from the source mechanism of thrust earthquakes in the interior of the plate requires ridge pushing forces. The net pulling force on the oceanic plate by the subducted slab has a maximum value comparable to pushing forces. The estimated horizontal deviatoric stress in intraplate regions, based on potential forces associated with the ridge, is on the order of a few hundred bars. The intraplate stress field in the region of the 1960 earthquake may change by a few tens of bars at most once the asthenosphere has relaxed, with changes on the order of one bar occurring at greater distances into the plate. The changes in the intraplate stress field are probably not noticeable unless the lithosphere is near failure.

Richardson, R. M.↗
NASA NTRS1981

Influence of friction forces on the motion of VTOL aircraft during landing operations on ships at sea

Equations describing the friction forces generated during landing operations on ships at sea were formulated. These forces depend on the platform reaction and the coefficient of friction. The platform reaction depends on the relative sink rate and the shock absorbing capability of the landing gear. The friction coefficient varies with the surface condition of the landing platform and the angle of yaw of the aircraft relative to the landing platform. Landings by VTOL aircraft, equipped with conventional oleopneumatic landing gears are discussed. Simplifications are introduced to reduce the complexity of the mathematical description of the tire and shock strut characteristics. Approximating the actual complicated force deflection characteristic of the tire by linear relationship is adequate. The internal friction forces in the shock strut are included in the landing gear model. A set of relatively simple equations was obtained by including only those tire and shock strut characteristics that contribute significantly to the generation of landing gear forces.

Howard, J. C.↗
NASA NTRS1981

Bifurcations from stationary to periodic solutions in a low-order model of forced, dissipative barotropic flow

The considered investigation is concerned with periodic solutions in the context of a forced, dissipative, barotropic spectral model truncated to three complex coefficients with constant forcing on only the intermediate scale. It is found that determining a periodic solution of this three-coefficient model also reduces to finding the algebraic roots of a real polynomial. In the derivation of this polynomial, a class of hydrodynamic spectral systems is described for which a periodic solution might be similarly specified. The existence of periodic solutions of the three-coefficient model is controlled by the roots of the stability polynomial of the basic stationary solution, which represents the simplest response to the constant forcing. When the forcing exceeds a critical value, the basic solution becomes unstable. Owing to the nature of the roots of the stability polynomial at critical forcing, bifurcation theory guarantees the existence of a periodic solution.

Mitchell, K. E.↗
NASA NTRS1981

Force and moment, flow-visualization, and boundary-layer tests on a shuttle orbiter model at Mach 6

Force and moment, flow visualization, and boundary layer state tests were conducted using two 0.004 scale shuttle orbiter models. The force and moment tests were conducted for an angle of attack range from 20 to 40 deg and for Reynolds numbers based on reference length from 0.4 million to 3.6 million. Schlieren photographs were obtained for each angle of attack and Reynolds number. The boundary layer state tests, which were conducted using hot film sensors mounted in a separate model, were conducted over the same range of conditions as the force tests. Test results were combined to show that changes in the boundary layer on a typical hypersonic force test model affect measurement of the axial force coefficient and that the state of the local boundary layer is important for interpreting hypersonic aerodynamic test results.

Calloway, R. L.↗
NASA NTRS1982

Capillary forces exerted by liquid drops caught between crossed cylinders. A 3-D meniscus problem with free contact line

The Young-Laplace equation is solved for three-dimensional menisci between crossed cylinders, with either the contact line fixed or the contact angle prescribed, by means of the Galerkin/finite element method. Shapes are computed, and with them the practically important quantities: drop volume, wetted area, capillary pressure force, surface tension force, and the total force exerted by the drop on each cylinder. The results show that total capillary force between cylinders increases with decreasing contact angle, i.e. with better wetting. Capillary force is also increases with decreasing drop volume, approaching an asymptotic limit. However, the wetted area on each cylinder decreases with decreasing drop volume, which raises the question of the optimum drop volume to strive for, when permanent bonding is sought from solidified liquid. For then the strength of the bond is likely to depend upon the area of contact, which is the wetted area when the bonding agent was introduced in liquid form.

Patzek, T. W.↗
NASA NTRS1983

Force balance in the magnetospheres of Jupiter and Saturn

Spacecraft measurements of the plasma populations and magnetic fields near Jupiter and Saturn have revealed that large magnetospheres surround both planets. Magnetic field measurements have indicated closed field line topologies in the dayside magnetospheres of both planets while plasma instruments have shown these regions to be populated by both hot and cold plasma components convected azimuthally in the sense of planetary rotation. By using published data from the Voyager Plasma Science (PLS), Low Energy Charged Particle (LECP), and Magnetometer (MAG) instruments, it is possible to investigate the validity of the time stationary MHD momentum equation in the middle magnetospheres of Jupiter and Saturn. At Saturn, the hot plasma population is negligible in the dynamic sense and the centrifugal force of the cold rotating plasma appears to balance the Lorentz force. At Jupiter, the centrifugal force balances about 25 percent of the Lorentz force. The remaining inward Lorentz force is balanced by pessure gradients in the hot, high-beta plasma of the Jovian magnetodisk.

Mcnutt, R. L., Jr.↗
NASA NTRS1983

Labyrinth seal forces on a whirling rotor

An experimental investigation of air labyrinth seal forces on a subsynchronously whirling model rotor is described and test results are given for diverging, converging, and straight two-strip seals. The effects of pressure drop, back pressure, whirl direction, and whirl frequency are shown. These results provide basic experimental data needed in the development of design methods for predicting and preventing self-excited whirl of turbine rotors and other machines having labyrinth seals. The total dynamic seal forces on the whirling model rotor are measured accurately by means of a novel active damping and stiffness system that is adjusted to obtain neutral whirl stability of the model rotor system. In addition, the whirling pressure pattern in the seal annulus is measured for a few test conditions and the corresponding pressure forces on the rotor are compared with the total measured forces. This comparison shows that either radial and axial pressure gradients in the seal annulus or drag forces on the rotor are significant.

Wright, D. V.↗
NASA NTRS1984

An analysis of the high-latitude thermospheric wind pattern calculated by a thermospheric general circulation model. I - Momentum forcing

A diagnostic processor (DP) was developed for analysis of hydrodynamic and thermodynamic processes predicted by the NCAR thermospheric general circulation model (TGCM). The TGCM contains a history file on the projected wind, temperature and composition fields at each grid point for each hour of universal time. The DP assimilates the history file plus ion drag tensors and drift velocities, specific heats, coefficients of viscosity, and thermal conductivity and calculates the individual forcing terms for the momentum and energy equations for a given altitude. Sample momentum forcings were calculated for high latitudes in the presence of forcing by solar radiation and magnetospheric convection with a 60 kV cross-tail potential, i.e., conditions on Oct. 21, 1981. It was found that ion drag and pressure forces balance out at F region heights where ion drift velocities are small. The magnetic polar cap/auroral zone boundary featured the largest residual force or net acceleration. Diurnal oscillations were detected in the thermospheric convection, and geostrophic balance was dominant in the E layer.

Killeen, T. L.↗
NASA NTRS1984

Hydraulic forces on a centrifugal impeller undergoing synchronous whirl

High speed centrifugal rotating machinery with large vibrations caused by aerodynamic forces on impellers was examined. A method to calculate forces in a two dimensional orbiting impeller in an unbounded fluid with nonuniform entering flow was developed. A finite element model of the full impeller is employed to solve the inviscid flow equations. Five forces acting on the impeller are: Coriolis forces, centripetal forces, changes in linear momentum, changes in pressure due to rotation and pressure changes due to linear momentum. Both principal and cross coupled stiffness coefficients are calculated for the impeller.

Allaire, P. E.↗
NASA NTRS1984

Prediction of force coefficients for labyrinth seals

The development of a linear model for the prediction of labyrinth seal forces and on its comparison to available stiffness data is presented. A discussion of the relevance of fluid damping forces and the preliminary stages of a program to obtain data on these forces are examined. Fluid-dynamic forces arising from nonuniform pressure patterns in labyrinth seal glands are known to be potentially destablizing in high power turbomachinery. A well documented case in point is that of the space Shuttle Main Engine turbopumps. Seal forces are also an important factor for the stability of shrouded turbines, acting in that case in conjunction with the effects of blade-tip clearance variations.

Lee, O. W. K.↗
NASA NTRS1985

Air Force satellite position management

The Space Act of 1958 identified the Department of Defense as responsible for conducting military operations in space. Subsequently, the United States Air Force was assigned to act as the DOD's executive agent for space. In addition, the Air Force is responsible for acquisition and launch of DOD space systems. Within the Air Force, space related roles and activities have been delegated to several subordinate organizations and agencies. The roles and responsibilities of agencies are still evolving. The Air Force has designated the Air Force System Command's Space Division as its office of primary responsibility for satellite position management. Spacecraft program offices at Space Division are required by regulation to include position management planning in both prelaunch and orbital phases of spacecraft development and operation.

Davis, R.↗
NASA NTRS1985

A preliminary investigation of the dynamic force-calibration of a magnetic suspension and balance system

The aerodynamic forces and moments acting upon a magnetically suspended wind tunnel model are derived from calibrations of suspension electro magnet currents against known forces. As an alternative to the conventional calibration method of applying steady forces to the model, early experiences with dynamic calibration are outlined, that is a calibration obtained by oscillating a model in suspension and deriving a force/current relationship from its inertia force and the unsteady components of currents. Advantages of dynamic calibration are speed and simplicity. The two methods of calibration applied to one force component show good agreement.

Goodyer, M. J.↗
NASA NTRS1984

A finite element method for nonlinear forced vibrations of beams

Techniques for defining a finite element model (FEM) for analysis of nonlinear vibrations in beam structures subjected to harmonic excitation are presented. The resulting model covers longitudinal deformation and inertial effects. The nonlinear oscillations of a beam element under forced excitation are modeled by a harmonic force matrix based on first order approximations of the Jacobian elliptic forcing function. Harmonic force and nonlinear stiffness matrices are derived and the nonlinear forced responses of beams are calculated under various boundary conditions. The results of FEM computations for simply-supported and clamped beams show that midplane stretching caused by large deflections increases the nonlinearity. Axially-restrained beams experience only hardening nonlinearity, while axially-free beams have reduced nonlinearity in deformation and inertia and an increase in linearity due to large deflection.

Mei, C.↗
NASA NTRS1985

True polar wander and plate-driving forces

The nature of net torques applied to the lithosphere by ridge and trench forces as implied by the absence of recent true polar wander is explored. The 'ridge push' and 'trench pull' forces and the potential net torques on the global lithosphere contributed by each of these forces are discussed. It is shown that the relative magnitudes of the net torques contributed by ridge and trench forces are constrained by the absence of true polar wander during the Cenozoic and by the magnitudes of basal shear stresses on the faster moving plates. It is suggested that the lack of recent true polar wander may be due at least in part to the coincidence of a near cancellation of net torques contributed by ridge and trench forces.

Davis, D. M.↗
NASA NTRS1985

Parallel computation with the force

A methodology, called the force, supports the construction of programs to be executed in parallel by a force of processes. The number of processes in the force is unspecified, but potentially very large. The force idea is embodied in a set of macros which produce multiproceossor FORTRAN code and has been studied on two shared memory multiprocessors of fairly different character. The method has simplified the writing of highly parallel programs within a limited class of parallel algorithms and is being extended to cover a broader class. The individual parallel constructs which comprise the force methodology are discussed. Of central concern are their semantics, implementation on different architectures and performance implications.

Jordan, H. F.↗
NASA NTRS1985

Rossby wavetrains in the stratosphere forced by localised disturbances in the troposphere

Studies have linked elements of the stratospheric circulation with particular localized features in the tropospheric circulation. This suggests a study of the response of the stratosphere to forcing by localized disturbances in the troposphere. A multilevel, primitive equation model is used of the stratosphere and mesosphere the height of whose lower boundary at 300 mb can be prescribed. Localized height disturbances which grow to steady amplitude are applied at this lower boundary, and the response of the initially axially symmetric stratosphere is studied. The perturbation, centered at 45 deg N, has a Gaussian distribution with a half width of 15 deg., corresponding roughly to the size of persistent troughs and blocking ridges in the troposphere. The forcing is nearly at fully amplitude 10 days after being switched on, and thereafter remains steady. Two types of experiments are conducted: in one the forcing is of small amplitude (100 gpm) and in the other it is of large amplitude (600 gpm). These pairs of experiments are compared to determine how nonlinear processes affect the perturbation fields. This is done locally by defining the perturbation response to the forcing as an anomaly, i.e., as a departure from the response in a controlled experiment in which no asymmetric forcing was applied at the lower boundary of the model. Experiments have been conducted for a number of atmospheric states obtained as zonal means of observations made by a stratospheric sounding unit (SSU). In this summary, results for the zonal mean flow on January 19, 1982 are outlined.

Marks, C. J.↗