SEARCH · Search NASA

Results for “GROUND TRACK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Effectiveness of the Space Shuttle anti-exposure system in a cold water environment

The purpose of this study was to evaluate the NASA Space Shuttle launch entry suit (LES) and raft for 24 h of protection against cold water immersion. Two configurations, the LES and the LES with raft (LES/r) were evaluated for antiexposure protection. Conditions were selected to simulate worst-case water and air temperatures along projected Space Shuttle ground tracks; i.e., water temperatures = 4.4 C, air temperature = 5.6 C, 1-foot waves (chop), and constant spray. Four males 31-44 years of age and one 32-year-old female were studied once in each configuration. Trials with and without a raft were scheduled for up to 24 and 6 h, respectively. Mean LES trial durations were 150 + or - 9 min and final rectal temperature (FRT) = 36.5 + or - 0.3 C. Mean LES/r trial durations were 398 + or - 126 min and FRT = 35.6 + or - 0.4 C. LES and LES/r trials were terminated for reaching FRT = 35.0 C or subject-requested termination due to discomfort. The longest LES and LES/r trials were terminated due to subject discomfort. Although not achieving the desired durations, the LES and LES/r did prove capable of protecting individuals, respectively, for up to 3 and 13.5 h. Since the longest runs were terminated due to subjective tolerance, actual survival times greater than 3 and 13.5 h could be expected.

Bagian, James P.↗

NASA NTRS1989

Illumination requirements for orbital SAR - Experience from SIR-B Canadian Shield experiments

Synthetic aperture radar illumination requirements for accurate rendition of geological structure in low-relief regions of uniform radar roughness are considered, along with the effect of illumination azimuth biasing. Results of two Shuttle imaging radar Canadian Shield experiments are discussed with emphasis on look azimuth, look direction, and look angle. It is found out that at least two look azimuths, preferably orthogonal, are essential for adequate rendition of regional structure of the area, while four nearly-orthogonal looks are necessary to compensate for slope orientation. This can be accomplished by orbital design with crossing ground tracks or utilizing a squint mode. Attention is given to the acquisition of coverage from look directions 180 deg apart and to multiple look angles desirable for geological applications.

Lowman, P. D.↗

NASA NTRS1991

Computing Gravitational Bumps From Repeating-Orbit Data

Iterative, least-squares algorithm efficiently computes estimates of both position errors indicative of irregularities in gravitational field of Earth and trajectory of satellite in orbit repeating along same ground track. Exploits sparse-matrix techniques. Useful in surveying, navigation, and geophysical research. Particularly useful for processing data on trajectory of satellite in low orbit tracked via Global Positioning System (GPS).

Wu, Jiun-Tsong↗

NASA NTRS1991

National Aero-Space Plane (NASP) program

A program to develop the technology for reusable airbreathing hypersonic/transatmospheric vehicles is addressed. Information on the following topics is presented in viewgraph form: (1) the National Aerospace Plane (NASP) program schedule; (2) the NASP program organization; (3) competitive strategy; (4) propulsion options; (5) wind tunnel data available for NASP; (6) ground track of envelope expansion; and (7) altitude vs. Mach number. A NASP/Space Shuttle comparison, NASP configuration matrix, and the propulsion concept of a high speed scramjet are also briefly addressed.

Tank, Ming H.↗

NASA NTRS1990

Altimeter crossover methods for precision orbit determination and the mapping of geophysical parameters

Accurate orbit determination and the recovery of geophysical parameters are presently attempted via methodologies which use differenced height measurements at the points where the ground tracks of the altimetric satellite orbits intersect. Such 'crossover measurements' could significantly improve the earth's gravity field model. Attention is given to a novel technique employing crossover measurements from two satellites carrying altimeter instruments; this method can observe zonal harmonics of the earth's geopotential which are weakly observed through single-satellite crossovers. This dual-satellite crossover technique will be applicable to data from such future oceanographic satellites as ERS-1.

Shum, C. K.↗

NASA NTRS1990

Mars observer - Orbital evolution, accuracy and control

The orbital phase and the major factors controlling the Mars Observer orbital evolution and accuracy are studied. Particular attention is given to the gravity field and atmospheric density. It is found that gravity field errors are reduced by the implementation of a gravity calibration period. A typical set of ground tracks corresponding to the optional mapping orbit definition is given.

Esposito, Pasquale B.↗

NASA NTRS1990

Determining ground trace crossovers for multiple spacecraft

Applications of the spherical-triangles method for determining ground-trace intersections of multiple spacecraft are considered. The results derived from this procedure are inconsistent with the actual ephemeris data. It is found that an alternative method based on the ground track equations provides more accurate results, is more easily implemented, and is computationally less intensive.

Chase, Robert↗

NASA NTRS1990

Loop current eddy shedding estimated using Geosat altimeter data

A method for extracting periodic signals from altimeter data is applied in the Gulf of Mexico using data from the first two years of the Geosat Exact Repeat Mission. The least squares fitting of selected frequencies of sine and cosine functions to the time series of sea surface height at each point of the Geosat ground track is used to estimate the dominant frequency in the gulf for this time period. Optimal interpolation of the sine and cosine coefficients at the dominant frequency to a uniformly spaced grid allows reconstruction of the time series in the gulf and shows eddies shedding from the Loop Current with a period of approximately 10.5 months, consistent with shedding periods determined from numerical models and analysis of satellite infrared data. This technique is a novel method for investigation of periodic signals in Geosat altimetry and is not severely affected by the data outages present in the time series.

Jacobs, Gregg A.↗

NASA NTRS1992

More About Gravitational Bumps And Repeating Orbits

Improved algorithm reduces computation needed to estimate dynamics affecting trajectory of satellite in orbit around Earth with approximately repeating ground track. Underlying concepts presented in "Computing Gravitational Bumps From Repeating-Orbit Data", (NPO-17925). Satellite presumed to undergo same gravitational perturbation upon each near-repetition. Tracking data from multiple nearly repeating arcs collected into segments called "bins" and processed together to reduce effects of random errors, and thereby obtain more-accurate estimates of dynamical parameters. Bumps in gravitational field of Earth estimated with less computation.

Wu, Jiun-Tsong↗

NASA NTRS1992

Programmable Hyperspectral Imaging Mapper

Programmable hyperspectral imaging mapper (PHIMAP) is conceptual generic advanced spectral imaging system that scans swath along ground track from airplane or spacecraft in orbit. Features include spectrally agile filters and processing on focal-plane array. Provides both high spatial resolution and large number of spectral channels. Can be programmed to trade spectral resolution andspectral coverage flexibly against signal-to-noise ratio to optimize utility of image data from scenes of spectrally and spatially varying brightness.

Cutts, James A.↗

NASA NTRS1991

Users manual for the IMA program

The Impulsive Mission Analysis (IMA) computer program provides a user-friendly means of designing a complete Earth-orbital mission profile using an 80386-based microcomputer. The IMA program produces a trajectory summary, an output file for use by the new Simplex Computation of Optimum Orbital Trajectories (SCOOT) program, and several graphics, including ground tracks on a world map, altitude profiles, relative motion plots, and sunlight/communication timelines. The user can design missions using any combination of three basic types of mission segments: double co-eliptic rendezvous, payload delivery, and payload de-orbit/spacecraft recovery. Each mission segment is divided into one or more transfers, and each transfer is divided into one or more legs, each leg consisting of a coast arc followed by a burn arc.

Williams, D. F.↗

NASA NTRS1990

Long duration exposure facility solar illumination data package

A post flight solar illumination data package was created by the LDEF thermal analysis data group in support of the LDEF science office data group. The data presented was prepared with the Thermal Radiation Analysis System (TRASYS) program. Ground tracking data was used to calculate daily orbital beta angles for the calculation of resultant fluxes. This data package will be useful in calculation of solar illumination fluent for a variety of beta angle orbital conditions encountered during the LDEF mission.

Berrios, William M.↗

NASA NTRS1992

A summary of XB-70 sonic boom signature data

A compilation is provided of measured sonic boom signature data derived from 39 supersonic flights (43 passes) of the XB-70 airplane over the Mach number range of 1.11 to 2.92 and an altitude range of 30500 to 70300 ft. These tables represent a convenient hard copy version of available electronic files which include over 300 digitized sonic boom signatures with their corresponding spectra. Also included in the electronic files is information regarding ground track position, aircraft operating conditions, and surface and upper air weather observations for each of the 43 supersonic passes. In addition to the sonic boom signature data, a description is also provided of the XB-70 data base that was placed on electronic files along with a description of the method used to scan and digitize the analog/oscillograph sonic boom signature time histories. Such information is intended to enhance the value and utilization of the electronic files.

Maglieri, Domenic J.↗

NASA NTRS1991

The role of clocks in operating deep space missions

Operation of deep space missions requires stable frequency references and clocks to perform several mission critical functions. These references are used in generating the telecommunication links to maintain communications between earth and spacecraft, in generating accurate doppler, range, and very long baseline interferometry (VLBI) observables for determining the spacecraft's time varying position, and to generate on-board timing information for clocking out timed commands and time tagging instrument data. In addition, science applications exist, particularly those utilizing radio instrumentation, which can require additional functions and levels of performance. The design necessary to support these functions affects both the spacecraft and the ground tracking stations. This paper provides a brief description of these functions and some of the key requirements needed to support them.

S. W. Asmar↗

NASA NTRS1991

Mars Observer trajectory and orbit design

The Mars Observer launch, interplanetary, Mars orbit insertion, and mapping orbit designs are described. The design objective is to enable a near-maximum spacecraft mass to be placed in orbit about Mars. This is accomplished by keeping spacecraft propellant requirements to a minimum, selecting a minimum acceptable launch period, equalizing the spacecraft velocity change requirement at the beginning and end of the launch period, and constraining the orbit insertion maneuvers to be coplanar. The mapping orbit design objective is to provide the opportunity for global observation of the planet by the science instruments while facilitating the spacecraft design. This is realized with a sun-synchronous near-polar orbit whose ground-track pattern covers the planet at progressively finer resolution.

Beerer, Joseph G.↗

NASA NTRS1991

Mars Observer trajectory and orbit control

The Mars Observer mission will study Mars from a low-altitude orbit. During interplanetary cruise, propulsive maneuvers are required to ensure capture, with a secondary constraint to satisfy limits on the probability of impact with Mars. After capture, the spacecraft will be brought to a near-circular mapping orbit through a series of maneuvers. Mapping orbit maneuvers will be performed in order to follow a predetermined set of ground tracks and to maintain orbit altitude. This will allow accurate spacecraft command sequence generation and aid science planning throughout the mapping phase. Specific orbit control plans for the open and close of the launch period have been developed to meet these needs. This paper describes the control capabilities and the associated expected velocity changes for the mission.

Halsell, C. A.↗

NASA NTRS1991

Global environmental monitoring with the EOS multi-angle imaging spectroradiometer (MISR)

The MISR provides a unique opportunity for studying the ecology and climate of the earth through the acquisition of systematic, global multiangle imagery in reflected sunlight. MISR uses nine cameras: a nadir camera and two banks of four cameras each pointed forward and aftward along the spacecraft ground track to image the earth at +/-30.7, +/-45.6, +/-60.0, and +/-72.5 deg. Radiometrically calibrated images at each angle will be obtained in four spectral bands centered at 440, 550, 670, and 860 nm. MISR will take image data in two different spatial resolution modes: local mode, in which selected targets are observed with 240-m spatial sampling, and global mode, where the entire sunlit eEarth is observed continuously with 1.92-km sampling. The instrument is capable of acquiring global coverage every nine days.

Diner, D. J.↗

NASA NTRS1992

TOPEX/Poseidon orbit acquisition maneuver design

The current baseline injection orbit for the jointly sponsored NASA/CNES TOPEX/Poseidon mission is near-circular, approximately 30 km below the desired operational orbit altitude and at the operational orbit inclination. A baseline maneuver sequence to retarget from this injection orbit to the desired operational orbit has been designed based upon the expected worst-case 3-sigma injection and maneuver execution errors. The sequence requires seven maneuvers, including an initial calibration burn, and achieves the operational orbit with the desired ground track pattern in 30 days. A delay sensitivity analysis has been conducted to estimate the allowable operational delay for each maneuver without increasing the total orbit acquisition period. The baseline sequence provides back-ups for a one-revolution delay for each maneuver and one-day delay for most maneuvers. It is also shown that a higher injection orbit allows the maneuver sequence to achieve the operational orbit in 26 days under a worst-case scenario.

Bhat, Ramachandra S.↗