SEARCH · Search NASA

Results for “Ground Support Equipment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS1979

The ground processing simulator - A tool for mission model analysis and planning from a launch site perspective

The Ground Processing Simulator (GPS) is a computer-assisted planning tool designed and developed for Space Shuttle launch site application. Utilizing two programming languages, General Purpose Simulation System and FORTRAN, GPS provides the capability to analyze proposed Shuttle mission models via computer simulation. NASA-developed mission models which specify Shuttle launch rates, mission durations, cargo elements, and designated launch site are tested for feasibility by the simulator. GPS produces facility utilization schedules (including the identification of conflicts), launch data options, cargo element requirement dates, ground support equipment inventory requirements, and other data necessary to assess both the programmatic and launch site resources required to support proposed mission models. The purpose of this computer-assisted analysis is to determine methods which will permit the launching of the maximum number of cargoes per year on schedule, and in the sequence desired, with the minimum expenditure of resources.

Ralph, J. A.↗

NASA NTRS1981

Developing experiment instrument packages

Ground-Support Equipment (GSE) system supports development, calibration, and testing of experiment packages. It is also used for "quick look" processing and in-progress data analysis. User interacts with incoming telemetry data, performs computations, and controls execution of procedures using versatile Experiment Command Interactive Language (ECIL). Program is implemented many ways with minimal modification. It is written in MARCO II and FORTRAN for DEC PDP-11/34 using the RSX-11M operating system.

Herreid, R.↗

NASA NTRS1980

Space Shuttle cargo processing at the Kennedy Space Center

This paper discusses the various activities involved in processing the two basic types of cargo being prepared for launch by the Space Transportation System. An overview will be presented describing the independent processing systems used to ready the Spacelabs and other horizontal cargo as well as upper stages and other vertical cargo. The interrelationship of these two types of preparations with the main line Space Shuttle test and checkout operations will be shown. In the explanation of each process, the ground support equipment and facilities of the Kennedy Space Center are described.

Rock, W. H.↗

NASA NTRS1977

Annual report to the NASA Administrator by the Aerospace Safety Advisory Panel on the space shuttle program. Part 1: Observations and conclusions

The panel reviewed the following areas of major significance for the Approach and Landing Test program: mission planning and crew training, flight-readiness of the Carrier Aircraft and the Orbiter, including its flight control and avionics system, facilities, and communications and ground support equipment. The management system for risk assessment was investigated. The Orbital Flight Test Program was also reviewed. Observations and recommendations are presented.

Source record↗

NASA NTRS1976

Annual report to the NASA Administrator by the Aerospace Safety Advisory Panel on the space shuttle program. Part 2: Summary of information developed in the panel's fact-finding activities

Safety management areas of concern include the space shuttle main engine, shuttle avionics, orbiter thermal protection system, the external tank program, and the solid rocket booster program. The ground test program and ground support equipment system were reviewed. Systems integration and technical 'conscience' were of major priorities for the investigating teams.

Source record↗

NASA NTRS1981

Common data buffer system

A high speed common data buffer system is described for providing an interface and communications medium between a plurality of computers utilized in a distributed computer complex forming part of a checkout, command and control system for space vehicles and associated ground support equipment. The system includes the capability for temporarily storing data to be transferred between computers, for transferring a plurality of interrupts between computers, for monitoring and recording these transfers, and for correcting errors incurred in these transfers. Validity checks are made on each transfer and appropriate error notification is given to the computer associated with that transfer.

Byrne, F.↗

NASA NTRS1980

GSFC Preferred Parts List PPL-15

A listing is presented of preferred electronic parts, part upgrading procedures, part derating guidelines, and part screening procedures to be used in the selection, procurement, and application of parts for Goddard Space Flight Center space systems and ground support equipment.

Adolphsen, J. W.↗

NASA NTRS1981

Video image processor on the Spacelab 2 Solar Optical Universal Polarimeter /SL2 SOUP/

The SOUP instrument is designed to obtain diffraction-limited digital images of the sun with high photometric accuracy. The Video Processor originated from the requirement to provide onboard real-time image processing, both to reduce the telemetry rate and to provide meaningful video displays of scientific data to the payload crew. This original concept has evolved into a versatile digital processing system with a multitude of other uses in the SOUP program. The central element in the Video Processor design is a 16-bit central processing unit based on 2900 family bipolar bit-slice devices. All arithmetic, logical and I/O operations are under control of microprograms, stored in programmable read-only memory and initiated by commands from the LSI-11. Several functions of the Video Processor are described, including interface to the High Rate Multiplexer downlink, cosmetic and scientific data processing, scan conversion for crew displays, focus and exposure testing, and use as ground support equipment.

Lindgren, R. W.↗

NASA NTRS1982

The 16th Aerospace Mechanisms Symposium

A technology survey of devices designed for use in space operations is presented. Technological areas covered include design of unique ground support equipment, orbiter specialized hardware, payload deployment, and positioning.

Source record↗

NASA NTRS1983

Quality-Planning-Requirements Documents

Report outlines planning procedures used in establishing inspection and quality assurance activities required of contractors constructing and testing Space Shuttle and ground-support equipment. Report useful to contractors establishing inspection points in commercial manufacturing operations.

Leonard, P. A.↗

NASA NTRS1982

The Goddard Space Flight Center preferred parts list, revision A

Tyson, N. E.↗

NASA NTRS1983

Rolling Beam Umbilical System

The decision to make the Centaur Vehicle a Space Transportation System (STS) payload meant that new ground support equipment provisions at Launch Pads Pads 39A and 39B were required. These new equipment provisions were needed to service the Centaur vehicle while it was installed in the Orbiter's payload bay prior to launch. This paper describes the design of a new rolling beam umbilical syste (RBUS) being added to the pad fixed service structure (FSS) in order to provide the primary functions of liquid hydrogen (LH2) fill, drain, and vent. The carrier plate itself is a Government-furnished equipment item and of necessity became a T-O disconnect. This permits quick offloading in the event of an abort prior to lift-off. In addition to the rolling beam structure, mechanisms, and fluid lines, it was necessary to design and build a carrier plate simulator to support early development testing of the mast at the Launch Equipment Test Facility at Kennedy Space Center. The RBUS is designed to be compatible with the rotating service structure (RSS) to the extent that the umbilical may be deployed with the RSS mated with the vehicle. It is also designed to clear the RSS as the RSS rotates back out of the way. Accessibility to the Orbiter aft compartment via the 50-1 door had to be maintained.

Tatem, B. C., Jr.↗

NASA NTRS1982

Safety policy and requirements for payloads using the Space Transportation System (STS)

The Space Transportation Operations (STO) safety policy is to minimize STO involvement in the payload and its GSE (ground support equipment) design process while maintaining the assurance of a safe operation. Requirements for assuring payload mission success are the responsibility of the payload organization and are beyond the scope of this document. The intent is to provide the overall safety policies and requirements while allowing for negotiation between the payload organization and the STO operator in the method of implementation of payload safety. This revision provides for a relaxation in the monitoring requirements for inhibits, allows the payload organization to pursue design options and reflects, additionally, some new requirements. As of the issue date of this NHB, payloads which have completed the formal safety assessment reviews of their preliminary design on the basis of the May 1979 issue will be reassessed for compliance with the above changes.

Source record↗

NASA NTRS1982

Cost effective development of a Shuttle-based astronomical instrument control system

The high level language FORTH is used for the electronic control of the Space Shuttle-based Ultraviolet Imaging Telescope, in a flight computer system which minimizes costs. The greater part of the breadboard version of the flight computer is assembled from commercially available components, reducing novel circuit design features and permitting simultaneous development of both hardware and software. The commercial boards are then refabricated on aluminum core heat conducting stock, using high reliability parts to produce the flight versions of the system. The system's ground support equipment employs a MINC-25 minicomputer which performs such functions as flight computer software development, PROM programming, test and integration support, and flight operations support. The implementation of these concepts in flight computer telescope controls is described.

Parise, R. A.↗

NASA NTRS1982

Top-off procedure for space-bound superfluid helium cryostats

Tests have been carried out on the transfer of pressurized liquid helium, slightly above the lambda temperature, in order to determine the optimum transfer parameters for a ground-based top-off just prior to launch. It is shown that the maximum mass fill of a spaceborne cryostat can be accomplished with the low-pressure top-off after initial fill with normal helium. The realistic maximum fill at temperatures below the lambda temperature can be expected to be at least 90 percent, which results in about 40 to 50 percent more mass at launch than without the top-off. In each case, specific ground support equipment is required to satisfy the individual cryostat requirements and extreme care is necessary during the transfer procedure.

Petrac, D.↗

NASA NTRS1985

Integrated System for Environmental Simulation

Integrated testing system subjects ground-support equipment for Space Shuttle to conditions that prevail during launch. Concept also applies to testing other equipment that must function faultlessly in difficult environment.

Uda, R.↗

NASA NTRS1983

High Resolution Imager (HRI) for the Roentgen Satellite (ROSAT) definition study

The design of the high resolution imager (HRI) on HEAO 2 was modified for use in the instrument complement of the Roentgen Satellite (ROSAT). Mechanical models of the front end assembly, central electronics assembly, and detector assembly were used to accurately represent the HRI envelope for both fit checks and focal plane configuration studies. The mechanical and electrical interfaces were defined and the requirements for electrical ground support equipment were established. A summary description of the ROSAT telescope and mission is included.

Source record↗

NASA NTRS1983

Ames Research Center Life Sciences Payload Project for Spacelab Mission 3

The Research Animal Holding Facility, developed to support rodent and squirrel monkey animal husbandry in the Spacelab environment, is to be tested during the Spacelab Mission 3 flight. The configuration and function of the payload hardware elements, the assembly and test program, the operational rationale, and the scientific approach of this mission are examined. Topics covered include animal life support systems, the squirrel monkey restraint, the camera-mirror system, the dynamic environment measurement system, the biotelemetry system, and the ground support equipment. Consideration is also given to animal pretests, loading the animals during their 12 hour light cycle, and animal early recovery after landing. This mission will be the first time that relatively large samples of monkeys and rats will be flown in space and also cared for and observed by man.

Callahan, P. X.↗