SEARCH · Search NASA

Results for “Group - Basic Process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Human performance in aerospace environments: The search for psychological determinants

A program of research into the psychological determinants of individual and crew performance in aerospace environments is described. Constellations of personality factors influencing behavior in demanding environments are discussed. Relationships between attitudes and performance and attitudes and personality are also reported. The efficacy of training in interpersonal relations as a means of changing attitudes and behavior is explored along with the influence of personality on attitude change processes. Finally, approaches to measuring group behavior in aerospace settings are described.

Helmreich, Robert L.↗

NASA NTRS1994

Polyamideimides Containing Carbonyl And Ether Linkages

Polyamideimides of new class contain carbonyl and ether connecting groups. New polyamideimides more easily processable, stronger in tension, and more resistant to solvents (including water) than conventional polyamideimides. Improvements in mechanical and chemical properties attributable to semicrystallinity introduced into otherwise amorphous polymers by incorporation of carbonyl and ether linkages.

Hergenrother, Paul M.↗

NASA NTRS1993

Recommendations for future research in hypersonic instrumentation

An overview of the NATO Advanced Research Workshop is presented. It describes the process followed to obtain a group consensus on the main technical recommendations for each of the five technical sessions of the Workshop and presents the general conclusions and recommendations for future research agreed upon by the workshop participants.

Ocheltree, S. L.↗

NASA NTRS1994

Basalt generation at the Apollo 12 site. Part 2: Source heterogeneity, multiple melts, and crustal contamination

The petrogenesis of Apollo 12 mare basalts has been examined with emphasis on trace-element ratios and abundances. Vitrophyric basalts were used as parental compositions for the modeling, and proportions of fractionating phases were determined using the MAGFOX prograqm of Longhi (1991). Crystal fractionation processes within crustal and sub-crustal magma chambers are evaluated as a function of pressure. Knowledge of the fractionating phases allows trace-element variations to be considered as either source related or as a product of post-magma-generation processes. For the ilmenite and olivine basalts, trace-element variations are inherited from the source, but the pigeonite basalt data have been interpreted with open-system evolution processes through crustal assimilation. Three groups of basalts have been examined: (1) Pigeonite basalts-produced by the assimilation of lunar crustal material by a parental melt (up to 3% assimilation and 10% crystal fractionation, with an 'r' value of 0.3). (2) Ilmenite basalts-produced by variable degrees of partial melting (4-8%) of a source of olivine, pigeonite, augite, and plagioclase, brought together by overturn of the Lunar Magma Ocean (LMO) cumulate pile. After generation, which did not exhaust any of the minerals in the source, these melts experienced closed-system crystal fractionation/accumulation. (3) Olivine basalts-produced by variable degrees of partial melting (5-10%) of a source of olivine, pigeonite, and augite. After generation, again without exhausting any of the minerals in the source, these melts evolved through crystal accumulation. The evolved liquid counterparts of these cumulates have not been sampled. The source compositions for the ilmenite and olivine basalts were calculated by assuming that the vitrophyric compositions were primary and the magmas were produced by non-modal batch melting. Although the magnitude is unclear, evaluation of these source regions indicates that both be composed of early- and late-stage Lunar Magma Ocean (LMO) cumulates, requiring an overturn of the cumulate pile.

Neal, Clive R.↗

NASA NTRS1995

NASA Systems Engineering Handbook

This handbook brings the fundamental concepts and techniques of systems engineering to NASA personnel in a way that recognizes the nature of NASA systems and environment. It is intended to accompany formal NASA training courses on systems engineering and project management when appropriate, and is designed to be a top-level overview. The concepts were drawn from NASA field center handbooks, NMI's/NHB's, the work of the NASA-wide Systems Engineering Working Group and the Systems Engineering Process Improvement Task team, several non-NASA textbooks and guides, and material from independent systems engineering courses taught to NASA personnel. Five core chapters cover systems engineering fundamentals, the NASA Project Cycle, management issues in systems engineering, systems analysis and modeling, and specialty engineering integration. It is not intended as a directive. Superseded by: NASA/SP-2007-6105 Rev 1 (20080008301).

Shishko, Robert↗

NASA NTRS2002

A simple way to measure daily lifestyle regularity

A brief diary instrument to quantify daily lifestyle regularity (SRM-5) is developed and compared with a much longer version of the instrument (SRM-17) described and used previously. Three studies are described. In Study 1, SRM-17 scores (2 weeks) were collected from a total of 293 healthy control subjects (both genders) aged between 19 and 92 years. Five items (1) Get out of bed, (2) First contact with another person, (3) Start work, housework or volunteer activities, (4) Have dinner, and (5) Go to bed were then selected from the 17 items and SRM-5 scores calculated as if these five items were the only ones collected. Comparisons were made with SRM-17 scores from the same subject-weeks, looking at correlations between the two SRM measures, and the effects of age and gender on lifestyle regularity as measured by the two instruments. In Study 2 this process was repeated in a group of 27 subjects who were in remission from unipolar depression after treatment with psychotherapy and who completed SRM-17 for at least 20 successive weeks. SRM-5 and SRM-17 scores were then correlated within an individual using time as the random variable, allowing an indication of how successful SRM-5 was in tracking changes in lifestyle regularity (within an individual) over time. In Study 3 an SRM-5 diary instrument was administered to 101 healthy control subjects (both genders, aged 20-59 years) for two successive weeks to obtain normative measures and to test for correlations with age and morningness. Measures of lifestyle regularity from SRM-5 correlated quite well (about 0.8) with those from SRM-17 both between subjects, and within-subjects over time. As a detector of irregularity as defined by SRM-17, the SRM-5 instrument showed acceptable values of kappa (0.69), sensitivity (74%) and specificity (95%). There were, however, differences in mean level, with SRM-5 scores being about 0.9 units [about one standard deviation (SD)] above SRM-17 scores from the same subject-weeks. SRM-5 scores also deviated more from a Gaussian distribution than did SRM-17 ones. In a study with a sample size of 101, the new SRM-5 instrument yielded scores with a mean of 4.11 and an SD of 1.13. Correlations between lifestyle regularity and age, and between lifestyle regularity and morningness appeared similar whether 5-item or 17-item SRM measures were used. When a gender difference in lifestyle regularity appeared, it was detected by both SRM-5 and SRM-17 measures.

Non-NASA Center↗

NASA NTRS2014

VARED: Verification and Analysis of Requirements and Early Designs

Requirements are a part of every project life cycle; everything going forward in a project depends on them. Good requirements are hard to write, there are few useful tools to test, verify, or check them, and it is difficult to properly marry them to the subsequent design, especially if the requirements are written in natural language. In fact, the inconsistencies and errors in the requirements along with the difficulty in finding these errors contribute greatly to the cost of the testing and verification stage of flight software projects [1]. Large projects tend to have several thousand requirements written at various levels by different groups of people. The design process is distributed and a lack of widely accepted standards for requirements often results in a product that varies widely in style and quality. A simple way to improve this would be to standardize the design process using a set of tools and widely accepted requirements design constraints. The difficulty with this approach is finding the appropriate constraints and tools. Common complaints against the tools available include ease of use, functionality, and available features. Also, although preferable, it is rare that these tools are capable of testing the quality of the requirements.

Badger, Julia↗

NASA NTRS2015

Towards an Open, Distributed Software Architecture for UxS Operations

To address the growing need to evaluate, test, and certify an ever expanding ecosystem of UxS platforms in preparation of cultural integration, NASA Langley Research Center's Autonomy Incubator (AI) has taken on the challenge of developing a software framework in which UxS platforms developed by third parties can be integrated into a single system which provides evaluation and testing, mission planning and operation, and out-of-the-box autonomy and data fusion capabilities. This software framework, named AEON (Autonomous Entity Operations Network), has two main goals. The first goal is the development of a cross-platform, extensible, onboard software system that provides autonomy at the mission execution and course-planning level, a highly configurable data fusion framework sensitive to the platform's available sensor hardware, and plug-and-play compatibility with a wide array of computer systems, sensors, software, and controls hardware. The second goal is the development of a ground control system that acts as a test-bed for integration of the proposed heterogeneous fleet, and allows for complex mission planning, tracking, and debugging capabilities. The ground control system should also be highly extensible and allow plug-and-play interoperability with third party software systems. In order to achieve these goals, this paper proposes an open, distributed software architecture which utilizes at its core the Data Distribution Service (DDS) standards, established by the Object Management Group (OMG), for inter-process communication and data flow. The design decisions proposed herein leverage the advantages of existing robotics software architectures and the DDS standards to develop software that is scalable, high-performance, fault tolerant, modular, and readily interoperable with external platforms and software.

Cross, Charles D.↗

NASA NTRS2016

Performance Analysis of a Hardware Implemented Complex Signal Kurtosis Radio-Frequency Interference Detector

Radio-frequency interference (RFI) is a known problem for passive remote sensing as evidenced in the L-band radiometers SMOS, Aquarius and more recently, SMAP. Various algorithms have been developed and implemented on SMAP to improve science measurements. This was achieved by the use of a digital microwave radiometer. RFI mitigation becomes more challenging for microwave radiometers operating at higher frequencies in shared allocations. At higher frequencies larger bandwidths are also desirable for lower measurement noise further adding to processing challenges. This work focuses on finding improved RFI mitigation techniques that will be effective at additional frequencies and at higher bandwidths. To aid the development and testing of applicable detection and mitigation techniques, a wide-band RFI algorithm testing environment has been developed using the Reconfigurable Open Architecture Computing Hardware System (ROACH) built by the Collaboration for Astronomy Signal Processing and Electronics Research (CASPER) Group. The testing environment also consists of various test equipment used to reproduce typical signals that a radiometer may see including those with and without RFI. The testing environment permits quick evaluations of RFI mitigation algorithms as well as show that they are implementable in hardware. The algorithm implemented is a complex signal kurtosis detector which was modeled and simulated. The complex signal kurtosis detector showed improved performance over the real kurtosis detector under certain conditions. The real kurtosis is implemented on SMAP at 24 MHz bandwidth. The complex signal kurtosis algorithm was then implemented in hardware at 200 MHz bandwidth using the ROACH. In this work, performance of the complex signal kurtosis and the real signal kurtosis are compared. Performance evaluations and comparisons in both simulation as well as experimental hardware implementations were done with the use of receiver operating characteristic (ROC) curves.

radiometers↗

NASA NTRSDate not supplied

AVT-297 Development of a Framework for Validation of Computational Tools

Design of aerospace vehicles relies on system models. These models rely on validation data to ensure accurate representation of the system. This paper provides an introduction to the problem and an overview of a NATO STO Activity, AVT-297, which developed a framework to determine validation experiments required to support system level models. The goals of the research group were to develop a process to identify a validation database for intended uses of a vehicle system, demonstrate the process on vehicles and document the process. Applying this process to multiple intended uses and collecting this set of validation databases identifies a set of validation experiments that could be applied to the design of multiple vehicles, further reducing the cost and time to develop air and naval vehicles. Four subgroup teams focused on different aspects of the validation database process: two focused on different aspects of a missile, and two focused on different aspects of a fixed-wing mobility transport class vehicle. This resulted in three different processes to decompose the multi-disciplinary problem to identify critical validation data. All four of the teams demonstrated their process on a sample problem demonstrating the benefit of the process.

Validation↗

NASA NTRSDate not supplied

From Formal Errors Towards Realistic Uncertainties

Evaluation of uncertainties of geodetic parameter estimates is the problem that is not yet solved in a satisfactory way. A direct evaluation of the uncertainties derived from a least square solution is labeled "formal" and is usually biased, sometimes up to an order of magnitude. Customary, the use of formal errors for scientific analysis is discouraged. We claim that the root of the problem is neglecting off-diagonal elements in the variance-covariance matrix of the noise in the data. A careful reconstruction of the full variance-covariance matrix, including the off-diagonal terms greatly improves realism of uncertainty estimates derived from least squares. We processed the dataset of VLBI group delays and built a prior variance-covariance of the atmosphere-driven noise based on analysis of the output of NASA high-resolution numerical weather models. We found that the uncertainties of parameter estimates derived from this least square solution that uses such variance-covariance matrices become much closer to realistic errors. We consider approaches for implementation of this method in routine data analysis of space geodesy data.

Leonid Petrov↗

NASA NTRSDate not supplied

Meeting SPD-41a Requirements for BPS

In April 2021 BPS Formed the Science Data Management Work Group. This Poster describes the process and forward steps.

BPS Science Data Management↗

NASA NTRS2026

Evaluation of AMSOIL® -ANT PGW Coolant Formula Change and Super Space AMSOIL Development

AMSOIL ® Propylene Glycol Water (PGW), is the baselined internal thermal control fluid for multiple manned spacecraft including Gateway (HALO, IHAB, and ALM modules) and Orion. The use of AMSOIL-ANT PGW was originally validated through extensive NASA/Collins materials-compatibility testing (circa 2008–2015). However, in late 2019, AMSOIL implemented an unannounced change in its PG inhibitor package. Because of this reformulation, concerns around materials compatibility arose. Therefore, NASA initiated corrosion rate and coolant stability testing in 2024. Results showed that the reformulated AMSOIL PG produced substantially elevated corrosion rates in aluminum alloys (about two times when compared to the original AMSOIL PG formula) accompanied by visible surface degradation. Coolant stability testing indicated accelerated propylene-glycol breakdown as well, with glycolate levels about nine times higher than the original formulation. Based on these findings, NASA Materials & Processes and Thermal Control Systems groups have baselined the use of the original PGW chemistry for all spacecraft use. In response, AMSOIL produced a reformulated variant, “Super Space AMSOIL” (ANT-SSA), compliant with MPCV 70156.This paper documents the reformulation testing completed, details on the formulation change, and the development of Super Space AMSOIL.

Woody Beringer↗

NASA NTRSDate not supplied

Evaluation of AMSOIL ® -ANT PGW Coolant Formula Change and Super Space AMSOIL ® Development

David Brockett↗

NASA NTRS1984

Theory and modeling of atmospheric turbulence, part 1

The cascade transfer which is the only function to describe the mode coupling as the result of the nonlinear hydrodynamic state of turbulence is discussed. A kinetic theory combined with a scaling procedure was developed. The transfer function governs the non-linear mode coupling in strong turbulence. The master equation is consistent with the hydrodynamical system that describes the microdynamic state of turbulence and has the advantages to be homogeneous and have fewer nonlinear terms. The modes are scaled into groups to decipher the governing transport processes and statistical characteristics. An equation of vorticity transport describes the microdynamic state of two dimensional, isotropic and homogeneous, geostrophic turbulence. The equation of evolution of the macrovorticity is derived from group scaling in the form of the Fokker-Planck equation with memory. The microdynamic state of turbulence is transformed into the Liouville equation to derive the kinetic equation of the singlet distribution in turbulence. The collision integral contains a memory, which is analyzed with pair collision and the multiple collision. Two other kinetic equations are developed in parallel for the propagator and the transition probability for the interaction among the groups.

Source record↗

NASA NTRS1988

Computer Interface For A Spectroreflectometer

FORTRAN program controls stepping motors and signal-processing electronics via S-100 computer bus. Group of spectroreflectometers modified to provide computer-controlled operation and data collection. Analog and digital signal-processing circuits enable use of computerized automatic data collection and analysis. Previously, spectroreflectometer data recorded on strip charts.

Hurd, William A.↗

NASA NTRS2008

Polymer Coats Leads on Implantable Medical Device

Langley Research Center s Soluble Imide (LaRC-SI) was discovered by accident. While researching resins and adhesives for advanced composites for high-speed aircraft, Robert Bryant, a Langley engineer, noticed that one of the polymers he was working with did not behave as predicted. After putting the compound through a two-stage controlled chemical reaction, expecting it to precipitate as a powder after the second stage, he was surprised to see that the compound remained soluble. This novel characteristic ended up making this polymer a very significant finding, eventually leading Bryant and his team to win several NASA technology awards, and an "R&D 100" award. The unique feature of this compound is the way that it lends itself to easy processing. Most polyimides (members of a group of remarkably strong and incredibly heat- and chemical-resistant polymers) require complex curing cycles before they are usable. LaRC-SI remains soluble in its final form, so no further chemical processing is required to produce final materials, like thin films and varnishes. Since producing LaRC-SI does not require complex manufacturing techniques, it has been processed into useful forms for a variety of applications, including mechanical parts, magnetic components, ceramics, adhesives, composites, flexible circuits, multilayer printed circuits, and coatings on fiber optics, wires, and metals. Bryant s team was, at the time, heavily involved with the aircraft polymer project and could not afford to further develop the polymer resin. Believing it was worth further exploration, though, he developed a plan for funding development and submitted it to Langley s chief scientist, who endorsed the experimentation. Bryant then left the high-speed civil transport project to develop LaRC-SI. The result is an extremely tough, lightweight thermoplastic that is not only solvent-resistant, but also has the ability to withstand temperature ranges from cryogenic levels to above 200 C. The thermoplastic s unique characteristics lend it to many commercial applications; uses that Bryant believed would ultimately benefit industry and the Nation. "LaRC-SI," he explains, "is a product created in a government laboratory, funded with money from the tax-paying public. What we discovered helps further the economic competitiveness of the United States, and it was our goal to initiate the technology transfer process to ensure that our work benefited the widest range of people." Several NASA centers, including Langley, have explored methods for using LaRC-SI in a number of applications from radiation shielding and as an adhesive to uses involving replacement of conventional rigid circuit boards. In the commercial realm, LaRC-SI can now be found in several commercial products, including the thin-layer composite unimorph ferroelectric driver and sensor (THUNDER) piezoelectric actuator, another "R&D 100" award winner (Spinoff 2005).

Source record↗

NASA NTRSDate not supplied

Multi-Omics Analysis of Mouse Retina Following Low Dose Radiation and/or Hindlimb Unloading

Rodent models have been used as analogs for studying the effects of spaceflight. NASA’s GeneLab provides access to omics datasets generated from spaceflight and ground-based experiments allowing for additional retrospective analysis. We used GeneLab’s GLDS-203, a dataset generated by researchers at Loma Linda University to study the impact of prolonged unloading and/or low-dose radiation on mouse retina. The purpose of this study was to understand the effect of gamma radiation and/or hindlimb unloading on mice retinas through a multi-omics analysis. In the experiment that generated the omics data, mice were irradiated with gamma-ray and/or subjected to hindlimb unloading for 21 days and multi-omics analysis was performed at 7 days, 1 month, or 4 months post exposure. In the current study, for each of the three timepoints, we compared epigenomic profiles for retinas from exposed mice against timepoint-matched controls. We identified a total of 5,271 differentially methylated loci (DML) and 321 differentially methylated regions (DMR; using a sliding window and step size of 500 bp) with methylation difference > 10% and q-value < 0.05 (sliding linear model corrected p-value) across the nine exposure groups. Highest correlation in methylation difference was seen for significant DMLs (q-value < 0.05) across different conditions at same post exposure timepoint (Figure 1).The location of DMLs and DMRs were characterized with respect to CpG islands and shores, putative promoters, gene body, and intergenic regions (Table 1). We analyzed RNA-seq counts and performed gene set enrichment analysis using differential expression results from comparing each exposure group to its timepoint-matched control group. Significant pathways (adjusted p-value <0.05) enriched in all three microgravity-only groups were related to morphogenesis of a branching epithelium, skeletal muscle cell differentiation, and response to fibroblast growth factor. Common processes across all timepoints in the radiation-only groups were retina homeostasis, synaptic vesicle exocytosis-endocytosis, and chemotaxis. In the combination groups, regulation of trans-synaptic signaling, and Rho protein signal transduction were enriched at all three timepoints. Processes related to purine nucleotide metabolism were enriched in all nine exposure groups, with activation at 1 month, and suppression at 7 days and 4 months. A total of 14 genes contained at least one DML and were differentially expressed at adjusted p-value < 0.05, including genes implicated in cataract development (Sipa1l3, Crybb3) and those involved in cytoskeletal organization (Plec, Flnb, Eef1a1). This analysis is part of a larger effort to understand the molecular mechanisms following spaceflight exposures that can help translate effects observed in animal models to human impacts.

Prachi Kothiyal↗