Search NASA⌕ Search

SEARCH · Search NASA

Results for “HEAT FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Study of two-phase flow and heat transfer in reduced gravities

Design of the two-phase systems which are anticipated to be utilized in future spacecraft thermal management systems requires a knowledge of two-phase flow and heat transfer parameters in reduced gravities. A program has been initiated by NASA to design a two-phase test loop and perform a series of experiments to generate the data for the Critical Heat Flux (CHF) and onset of instability under reduced gravities. In addition to low gravity airplane trajectory testing, the experimental program consists of a set of laboratory tests with vertical upflow and downflow configurations. Modularity is considered in the design of this experiment and the test loop in instrumented to provide data for two-phase pressure drop and flow regime behavior. Since the program is in the final stages of the design and construction task, this article is intended to discuss the phenomena, design approach, and the description of the test loop.

Abdollahian, Davood↗
NASA NTRS1994

Mantle devolatilization and rheology in the framework of planetary evolution

We investigate the thermal history of an Earth-like planet with the help of a parameterized mantle convection model including the volatile exchange between mantle and surface reservoirs. The weakening of mantle silicates by dissolved volatiles is described by a functional relationship between creep rate and water fugacity. We use flow law parameters of diffusion creep in olivine under dry and wet conditions. The mantle degassing rate is considered as directly proportional to the seafloor spreading rate, which is also dependent on the mantle heat flow. To calculate the spreading rate, we assume that the heat flow under the mid-ocean ridges is double the average mantle heat flow. The rate of regassing also depends on the seafloor spreading rate as well as on other factors like the efficiency of volatile recycling through island arc volcanism. Both mechanisms (de- and regassing) are coupled self-consistently with the help of the parameterized convection model under implementation of a temperature and volatile-content-dependent mantle viscosity.

Franck, S.↗
NASA NTRS1989

Simulating transitional flow and heat transfer over the flat plate and circular cylinder using a K-epsilon turbulence model

A boundary layer computer code, called TEXSTAN, has been used to simulate external, transitional, fluid flow and heat transfer over the flat plate and circular cylinder. Turbulence modeling was accomplished by using a low-Reynolds number K-epsilon turbulence model. The study was made for free-stream turbulence intensities less than 15 percent. The comparison of the flat plate heat transfer predictions to experimental data showed good agreement, for the location of transition as well as in the heat transfer coefficient. The typical discrepancy in predicting the heat transfer coefficient was less than 5 percent of the measured value.

Sullivan, T. J.↗
NASA NTRS2004

Alaskan Permafrost Analogs of Martian Small Valley Networks, Thermokarst, Terrain Softening, Terraces, and Volcanic Craters

A geomorphic landscape analog in the Bering Land Bridge National Preserve (Alaska) offers a model for Mars where (1) fluvial and alluvial deposition, volcanism, and other processes first produced a layered ice-rich upper crust, and then (2) severe permafrost conditions (mild by today's Martian standards) and heterogeneous heat flow and volcanism have modified this terrain to produce a geomorphic areal mosaic that is alternately dominated by (a) geothermal meltwater and sublimation (bottom-up heat flow) and (b) surface-driven meltwater and sublimation (top-down heat flow).

Kargel, Jeffrey S.↗
NASA NTRS1992

Numerical simulation of fluid flow and heat transfer in a thin liquid film over a rotating disk

The results of a numerical simulation of the flow field and associated heat transfer coefficient are presented for the free surface flow of a thin liquid film adjacent to a horizontal rotating disk. The computation has been performed for different flow rates and rotational velocities using a three-dimensional boundary-fitted coordinate system. Since the geometry of the free surface is unknown and dependent on flow rate, rate of rotation, and other parameters, an interative procedure had to be used to ascertain its location. The computed film height agreed well with existing experimental measurements. The flow was dominated by inertia near the entrance and close to the free surface, and dominated by centrifugal force at larger radii and adjacent to the disk. The rotation enhanced the heat transfer coefficient by a significant amount.

Rahman, M. M.↗
NASA NTRS1972

Stability of plane Poiseuille flow with heat transfer.

Investigation of the influence of heat transfer on the stability of a plane Poiseuille flow iahnnl. The liquid flow is affected by the heat transfer through the variation in viscosity with temperature. Additional viscosity gradient terms are included in a modified Orr-Sommerfeld equation, and it is the presence of these terms which leads to a prediction of more unstable flows, for without the inclusion of these extra terms, the flow is stabilized. The results show that a temperature difference between the walls is always destabilizing and, in particular, a temperature difference between the walls of 100 F leads to a reduction in the critical Reynolds number from 7800 to 4600.

Potter, M. C.↗
NASA NTRS1981

Silicon Ingot Casting - Heat Exchanger Method (HEM). Multi-Wire Slicing - Fixed Abrasive Slicing Technique (Fast). Phase 4 Silicon Sheet Growth Development for the Large Area Sheet Task of the Low-Cost Solar Array Project

The crystallinity of large HEM silicon ingots as a function of heat flow conditions is investigated. A balanced heat flow at the bottom of the ingot restricts spurious nucleation to the edge of the melted-back seed in contact with the crucible. Homogeneous resistivity distribution over all the ingot has been achieved. The positioning of diamonds electroplated on wirepacks used to slice silicon crystals is considered. The electroplating of diamonds on only the cutting edge is described and the improved slicing performance of these wires evaluated. An economic analysis of value added costs of HEM ingot casting and band saw sectioning indicates the projected add on cost of HEM is well below the 1986 allocation.

Schmid, F.↗
NASA NTRS1981

A computer program for the simulation of heat and moisture flow in soils

A computer program that simulates the flow of heat and moisture in soils is described. The space-time dependence of temperature and moisture content is described by a set of diffusion-type partial differential equations. The simulator uses a predictor/corrector to numerically integrate them, giving wetness and temperature profiles as a function of time. The simulator was used to generate solutions to diffusion-type partial differential equations for which analytical solutions are known. These equations include both constant and variable diffusivities, and both flux and constant concentration boundary conditions. In all cases, the simulated and analytic solutions agreed to within the error bounds which were imposed on the integrator. Simulations of heat and moisture flow under actual field conditions were also performed. Ground truth data were used for the boundary conditions and soil transport properties. The qualitative agreement between simulated and measured profiles is an indication that the model equations are reasonably accurate representations of the physical processes involved.

Camillo, P.↗
NASA NTRS1995

Magnetic heat pump flow director

A fluid flow director is disclosed. The director comprises a handle body and combed-teeth extending from one side of the body. The body can be formed of a clear plastic such as acrylic. The director can be used with heat exchangers such as a magnetic heat pump and can minimize the undesired mixing of fluid flows. The types of heat exchangers can encompass both heat pumps and refrigerators. The director can adjust the fluid flow of liquid or gas along desired flow directions. A method of applying the flow director within a magnetic heat pump application is also disclosed where the comb-teeth portions of the director are inserted into the fluid flow paths of the heat pump.

Howard, Frank S.↗
NASA NTRS1961

Free Flight Observation of a Separated Turbulent Flow Including Heat Transfer Up to Mach 8.5

A turbulent boundary layer separated by a forward-facing step was observed on the cylindrical portion of a hemisphere-cone-cylinder test vehicle. Tip blunting, producing a shear flow, was found to induce higher pressures on the cylindrical portion than were predicted from ballistic tunnel data of unblunted projectiles. An approximate method for predicting this blunt-body pressure distribution was hypothesized. These findings, along with the hypothesis, were substantiated by a wind tunnel test of a similar body. The peak pressure ratios of the separation were smaller in magnitude than flat plate theory predicted because of the effect of the shear flow. The decrement in heating of the separated flow, relative to the corresponding attached flow, was found to compare well with the expected results.

McConnell, Dudley George↗
NASA NTRS2001

Development of Flow and Heat Transfer Models for the Carbon Fiber Rope in Nozzle Joints of the Space Shuttle Reusable Solid Rocket Motor

Methodologies have been developed for modeling both gas dynamics and heat transfer inside the carbon fiber rope (CFR) for applications in the space shuttle reusable solid rocket motor joints. Specifically, the CFR is modeled using an equivalent rectangular duct with a cross-section area, friction factor and heat transfer coefficient such that this duct has the same amount of mass flow rate, pressure drop, and heat transfer rate as the CFR. An equation for the friction factor is derived based on the Darcy-Forschheimer law and the heat transfer coefficient is obtained from pipe flow correlations. The pressure, temperature and velocity of the gas inside the CFR are calculated using the one-dimensional Navier-Stokes equations. Various subscale tests, both cold flow and hot flow, have been carried out to validate and refine this CFR model. In particular, the following three types of testing were used: (1) cold flow in a RSRM nozzle-to-case joint geometry, (2) cold flow in a RSRM nozzle joint No. 2 geometry, and (3) hot flow in a RSRM nozzle joint environment simulator. The predicted pressure and temperature history are compared with experimental measurements. The effects of various input parameters for the model are discussed in detail.

Wang, Q.↗
NASA NTRS1988

Confidence set inference with a prior quadratic bound

In the uniqueness part of a geophysical inverse problem, the observer wants to predict all likely values of P unknown numerical properties z = (z sub 1,...,z sub p) of the earth from measurement of D other numerical properties y(0)=(y sub 1(0),...,y sub D(0)) knowledge of the statistical distribution of the random errors in y(0). The data space Y containing y(0) is D-dimensional, so when the model space X is infinite-dimensional the linear uniqueness problem usually is insoluble without prior information about the correct earth model x. If that information is a quadratic bound on x (e.g., energy or dissipation rate), Bayesian inference (BI) and stochastic inversion (SI) inject spurious structure into x, implied by neither the data nor the quadratic bound. Confidence set inference (CSI) provides an alternative inversion technique free of this objection. CSI is illustrated in the problem of estimating the geomagnetic field B at the core-mantle boundary (CMB) from components of B measured on or above the earth's surface. Neither the heat flow nor the energy bound is strong enough to permit estimation of B(r) at single points on the CMB, but the heat flow bound permits estimation of uniform averages of B(r) over discs on the CMB, and both bounds permit weighted disc-averages with continous weighting kernels. Both bounds also permit estimation of low-degree Gauss coefficients at the CMB. The heat flow bound resolves them up to degree 8 if the crustal field at satellite altitudes must be treated as a systematic error, but can resolve to degree 11 under the most favorable statistical treatment of the crust. These two limits produce circles of confusion on the CMB with diameters of 25 deg and 19 deg respectively.

Backus, George E.↗
NASA NTRSDate not supplied

Modeling of Cryogenic Heated-Tube Flow Boiling Experiments of Hydrogen and Helium With GFSSP

Accurate modeling of cryogenic boiling heat transfer is vital for the development of extended-duration space missions. Such missions may require the transfer of cryogenic propellants from in-space storage depots or the cooling of nuclear reactors. Purdue University in collaboration with NASA has assembled a database of cryogenic flow boiling data points from heated-tube experiments dating back to 1959, which has been used to develop new flow boiling correlations specifically for cryogens. Computational models of several of these experiments have been constructed in the Generalized Fluid System Simulation Program (GFSSP), a network flow code developed at NASA’s Marshall Space Flight Center. The new Purdue-developed correlations cover the full boiling curve: onset of nucleate boiling, nucleate boiling, critical heat flux, and film boiling. These correlations have been coded into GFSSP user subroutines. The fluids modeled are hydrogen and helium. Predictions of wall temperature, heat transfer coefficient, and pressure drop are presented and compared to the test data.

multi-phase flow↗
NASA NTRS2002

A study of hear sink performance in air and soil for use in a thermoelectric energy harvesting device

A suggested application of a thermoelectric generator is to exploit the natural temperature difference between the air and the soil to generate small amounts of electrical energy. Since the conversion efficiency of even the best thermoelectric generators available is very low, the performance of the heat sinks providing the heat flow is critical. By providing a constant heat input to various heat sinks, field tests of their thermal conductances in soil and in air were performed. Aprototype device without a thermoelectric generator was constructed, buried, and monitored to experimentally measure the heat flow achievable in such a system. Theoretical considerations for design and selection of improved heat sinks are also presented. In particular, the method of shape factoranalysis is used to give rough estimates and upper bounds for the thermal conductance of a passive heat sink buried in soil.

Thermoelectric power generation↗
NASA NTRS1990

Evolution of midplate hotspot swells: Numerical solutions

The evolution of midplate hotspot swells on an oceanic plate moving over a hot, upwelling mantle plume is numerically simulated. The plume supplies a Gaussian-shaped thermal perturbation and thermally-induced dynamic support. The lithosphere is treated as a thermal boundary layer with a strongly temperature-dependent viscosity. The two fundamental mechanisms of transferring heat, conduction and convection, during the interaction of the lithosphere with the mantle plume are considered. The transient heat transfer equations, with boundary conditions varying in both time and space, are solved in cylindrical coordinates using the finite difference ADI (alternating direction implicit) method on a 100 x 100 grid. The topography, geoid anomaly, and heat flow anomaly of the Hawaiian swell and the Bermuda rise are used to constrain the models. Results confirm the conclusion of previous works that the Hawaiian swell can not be explained by conductive heating alone, even if extremely high thermal perturbation is allowed. On the other hand, the model of convective thinning predicts successfully the topography, geoid anomaly, and the heat flow anomaly around the Hawaiian islands, as well as the changes in the topography and anomalous heat flow along the Hawaiian volcanic chain.

Liu, Mian↗
NASA NTRS1986

Carbon exchange between the mantle and the crust and its effect upon the atmosphere: Today compared to Archean time

Paleobiologists now recognize that the Earth's biosphere has been profoundly affected by geologic processes. One very important process is the dissipation of heat which has been generated by radioactivity and/or stored within the earth. Heat flow is responsible for crustal movements and therefore it is the principal architect for constructing the environments (e.g. shallow marine, continental, etc.) wherein life developed and flourished. Heat flow has also influenced the movements of volatile elements (e.g. C, N, H, S, rare gases, etc.) both within the Earth's crust and between the crust and mantle. The inventory of these elements in the Earth's crust is important, not just because some of them constitute the building blocks of organic matter, but also because they influence the biosphere's climate. The purpose of this work is to evaluate how the decline of heat flow over the course of the Earth's history has influenced the carbon inventory in the Earth's crust. Such an evaluation must first consider whether the rate at which carbon is presently being exchanged between the mantle and crust is sufficient to play an important role in controlling the crustal inventory. Secondly, this exchange of carbon must be reevaluated in the context of the Precambrian Earth's environment. One very important consideration is that the upper mantle was perhaps 300 C hotter 3 b.y. ago than it is today.

Desmarais, D.↗
NASA NTRS1992

Fluid flow and heat convection studies for actively cooled airframes

The work done during the progress report period from May-October 1992 is summarized. The effect of wall thermal boundary conditions on flows over a step or rib when repeated rib roughness is used for heating augmentation is examined. In numerical investigations of various such laminar and turbulent flows, the local heat transfer coefficients on a forward-facing step or on a rib were found to be very sensitive to the wall thermal boundary condition. For the computation of constant property laminar flow, the wall thermal boundary conditions were either a uniform heat flux or a uniform temperature. Results (Nusselt number and isotherms) of the studies are included. The second part of the work consisted of using PHOENICS to solve the conjugate heat transfer problem of flow over a rib in channel. Finally, the algebraic stress model in the TEAM (Turbulent Elliptic Algorithm-Manchester) code was tested for jet impingement flow, but there needs to be an addition of the energy equation to the code.

Mills, A. F.↗