Search NASA⌕ Search

SEARCH · Search NASA

Results for “HIGH WATER PROJECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Modular High Temperature Gas-Cooled Reactor: Accident Analysis

Licensing Modernization Project (LMP) Risk Informed Approach Selection of Licensing Basis Events (LBEs) Frequency-Consequence Target LBE Cumulative Risk Targets Structures, Systems, and Components (SSC) Safety Categories Classification Evaluation of Defense in Depth (DID) Use of Probabilistic Risk Assessment (PRA) in LMP Process PRA Policy Statement American Nuclear Society (ANS) Non-Light-Water Reactor (non-LWR) PRA Standard

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Data for Kim et al., "Variations in the optical and molecular composition of dissolved organic matter exported from coastal wetlands"

Knowledge about sources and composition of marsh-derived dissolved organic matter (DOM) is critical for understanding the role of marshes in coastal biogeochemical cycling and the fate of marsh-derived DOM in the ocean. To investigate tidal variability in composition of marsh-derived DOM, Kim et al. examined the optical and molecular characteristics of hourly surface water samples at three tidal creeks in the Chesapeake Bay. Groundwater samples along the terrestrial landscape gradient as well as estuarine water from the adjacent estuary at each site were also collected to help resolve sources of surface water DOM. Samples were collected in summer 2024 at three sites – SWH: Sweet Hall Marsh, GCW: Kirkpatrick Marsh, and GWI: Goodwin Islands – which are part of synoptic sites in the Chesapeake Bay region of the COMPASS-FME (Coastal Observations, Mechanisms, and Predictions Across Systems and Scales - Field, Measurements, and Experiments) project. Surface water samples were collected hourly over a 48-hour period at each site. Groundwater and estuarine water samples were collected once. This dataset includes- Surface water depth and salinity- Dissolved organic carbon (DOC) and total dissolved nitrogen (TDN) concentrations- Optical indices and relative composition of parallel factor analysis (PARAFAC) components- High resolution mass spectrometry data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Financial Analysis of Experimental Releases Conducted at Glen Canyon Dam during Water Year 2019

This report was prepared by Argonne National Laboratory in support of a financial analysis of the Glen Canyon Dam high-flow experimental release that is intended to mobilize the sand in the Colorado River with high-volume water releases from the dam and redeposit it downstream as sandbars along the river. These sandbars serve, among other things, as habitat for wildlife. This experimental release was conducted during the period from November 5 to November 8, 2018. This analysis was funded by the Colorado River Storage Project (CRSP) Office of the U.S. Department of Energy Western Area Power Administration (WAPA). CRSP markets electricity produced by hydroelectric facilities collectively known as the Salt Lake City Area Integrated Projects including dams equipped for power generation on the Colorado, Green, Gunnison, and Rio Grande Rivers and on Plateau Creek in the states of Arizona, Colorado, New Mexico, Utah, and Wyoming. Staff members in Argonne’s Energy Systems Division prepared this technical report with assistance from the WAPA CRSP and Energy Marketing and Management Offices.

13 HYDRO ENERGY↗
DOE OSTI2022

An Integrated Theoretical and Experimental Approach to Achieve Highly Polarizable Relaxor Ferroelectric Liquid Crystalline Polymers

In this project, we have designed and synthesized a series of aliphatic sulfonlyated chiral and achiral polyether. The major objective is to achieve ferroelectric liquid crystalline polymers with a high spontaneous polarization (0.04-0.08 C/m2). Due to the strong dipole-dipole interaction among the sulfonyl side groups, which resembles that among water molecules, these polyethers can exhibit various liquid crystalline self-assemblies without any rigid mesogens. By tuning the position of the sulfonyl groups, single versus double sulfonyl groups, and spacer/tail length and methyl branches, the liquid crystalline phases include smectic A, smectic C, and hexagonal columnar phases. When the single sulfonyl group is next to the main chain or disulfonyl groups are separated by a short C3 spacer, the dipolar interaction is too strong to allow any dipole switching. As a result, the linear dielectric behavior is observed with a low dielectric constant of 5-7. When the single sulfonyl groups are away from the main chain, the paraelectric behavior is obtained with a high dielectric constant around 20. From this study, we predict that by further tailoring the intermolecular interactions among the disulfonyl side groups, it is possible to achieve ferroelectric property for these liquid crystalline polymers. If successful, these ferroelectric liquid crystalline polymers can be used for efficient electrocaloric cooling applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Abstract for CRADA between Capture6 CORP and NETL

The National Energy Technology Laboratory (NETL) and Capture6 CORP (Participant) will collaborate to refine Capture6’s transformative air contactor design for optimal direct air capture (DAC) under an awarded project from the Department of Energy’s Direct Air Capture Pre-Commercialization Technology Prize. Current cooling tower designs require exponentially more resources as the concentration of CO 2 in the gas phase decreases, resulting in a low conversion rate of carbonates, a large physical footprint, and high evaporation of water, which consequently limits the energy and water benefits that a DAC process can create. Capture6’s innovative tower design AURA (Absorption Unit Reactor for Ambient air) seeks to improve the mass transfer characteristics of legacy cooling towers and reduces total energy demand by: (1) introducing laminar and turbulent flow to increase mass transfer, (2) generating a solvent gradient to improve CO 2 absorption, (3) leveraging venturi and packed towers to increase the surface for the mass-transfer process, (4) adding charged/cool plates to reduce overall water loss in the system, and (5) utilizing surfactant additives to increase mass transfer. The collaboration will facilitate the deployment of technologies that reduce the total energy required and carbon footprint of solvent-based carbon dioxide removal (CDR) technologies. The anticipated results support NETL’s goal of fostering rapid development and commercialization pathways for technologies that remove CO 2 from the atmosphere.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Technology Maturation Plan for Catalytic Membrane Reactors Based on Carbon Molecular Sieve Hollow Fiber Membranes for Sustainable and Modular H 2 Production

The overarching objective of the proposed project was to demonstrate a process-intensified approach to economically viable, modular H 2 production from waste biomass using catalytic membrane reactors (CMRs) based on carbon molecular sieve (CMS) hollow-fiber membranes. Specifically, the CMRs were developed to selectively remove H 2 during the high-temperature water-gas shift (WGS) reaction to circumvent thermodynamic limitations on converting CO to CO 2 and H 2 . To this end, our core technical activities were to (1) develop high-performance CMRs based on thermally stable, processible polymer-derived CMS membranes and (2) design and prepare new multicomponent CO 2 -tolerant nano-catalysts using a unique flame-based aerosol process for WGS reaction.

08 HYDROGEN↗
DOE OSTI2022

Space and Time Dynamics of Transpiration in the East River Watershed: Biotic and Abiotic Controls

Alpine forests have important impacts on water resources by affecting how much of the precipitation that falls on a watershed is routed to streamflow or returned to the atmosphere as transpiration – so-called “green water”. In many of the high-altitude watersheds that supply critical water resources to the western US, it remains a challenge to predict how much water forests will utilize limiting the ability to predict both short and long term information on downstream water resources. The uncertainty emerges because transpiration varies between tree species, across landscapes and over time in ways that cannot readily be predicted from physically-based models for evaporation. In this project, we utilized a technique called sap flux to measure the rate of water use for three common species of fir, spruce and aspen distributed across a hillslope in the East River Watershed from 2019-2021. We also made ~weekly measurements of the concentration of stable isotopic tracers in transpiration to understand not only how much water was being used but whether it originated from summer rain or snowmelt. Firstly, our results show that the species tend to use similar amounts of total water but they achieve this similar cumulative water flux both by using water at different times of the year and by using different water sources. This shows the importance of including species-level information into models used to make seasonal streamflow predictions. Secondly, our results show that trees lower on the hillslope use older waters all through the summer whereas trees higher on the hillslope rely more heavily on recent summer rain. This means trees lower on the hillslope are less sensitive to year-to-year changes in summer climate. Lastly, we found that sites with dense forest stands displayed the largest amounts of year-to-year changes in transpiration and thus these high localized spots in the watershed are the primary drivers of changes in “green water” use. The results provide an unprecedented spatial and temporal picture of forest water use that confirms a number of fundamental hypotheses on hillslope ecohydrology that had not previously been tested against observations. Predictions of streamflow that will benefit from this work are highly valuable for agriculture management, flood control and ecological restoration efforts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Field‐scale analysis of miscanthus production indicates climate change may increase the opportunity for water quality improvement in a key Iowa watershed

Abstract The Raccoon River Basin is the primary source for drinking water in Iowa's largest city and plays a major role in the Mississippi River Basin's high nutrient exports. Future climate change may have major impacts on the biological, physiological, and agronomic processes imposing a threat to ecosystem services. Efforts to reduce nitrogen (N) loads within this basin have included local litigation and the implementation of the Iowa Nutrient Reduction Strategy, which suggest incorporating bioenergy crops (i.e., miscanthus) within the current corn–soybean landscape to reach a 41% reduction in nitrate loads. This study focuses on simulating N export for historical and future land use scenarios by using an agroecosystem model (Agro‐IBIS) and a hydrology model (THMB) at the 500‐m resolution, similar to the scale of agricultural fields. Model simulations are driven by CMIP5 climate data for historical, mid‐century, and late‐century under the RCP 4.5 and 8.5 warming projections. Using recent crop profit analyses for the state of Iowa, profitability maps were generated and nitrogen leaching thresholds were used to determine where miscanthus should replace corn–soybean area to maximize reductions in N pollution. Our results show that miscanthus inclusion on low profit and high N leaching areas can result in a 4% reduction of N loss under current climate conditions and may reduce N loss by 21%–26% under future climate conditions, implying that water quality has the potential continue to improve under future climate conditions when strategically implemented conservation practices are included in future farm management plans.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Characterizing Ocean Acidification and Atmospheric Emission caused by Methane Released from Gas Hydrate Systems along the US Atlantic Margin (Final Report)

To assess the environmental impact of decomposing gas hydrates, this project characterized the atmospheric emission and ocean acidification associated with seafloor-released methane along the U.S. Atlantic Margin. This project leveraged the newly discovered seafloor seeps in this region, many of which are located near the landward limit of gas hydrate stability, to investigate the fate and environmental impact of methane once released from the seafloor. Several research directions were pursued during these investigations. First, high-spatial resolution surface surveys were conducted to characterize the degree to which sea-to-air emission of methane is correlated with acoustically detected seafloor bubble emissions. Second, the natural isotopic signatures of both radiocarbon and δ 13 C were measured throughout the water column to observe if seafloor-released methane was detected in surface waters or if it was replaced by a different source. Third, the extent of methane oxidation in the water column was constrained to assess the ability of this process to mitigate atmospheric methane emissions. Fourth, since aerobic methane oxidation ultimately converts methane to carbon dioxide, the extent of ocean acidification relating to this process was assessed. Ultimately, this project was conducted in four stages. Stage one involved preparations for the research expedition along the U.S. Atlantic Margin. This involved calibrating, modifying, and validating equipment needed for sample and data collection in this unique environment. Stage two involved executing the at-sea science. This research was conducted from 25 August to 5 September 2017 on the R/V Hugh R. Sharp. This expedition left from Lewes, Delaware and investigated the continental slope from approximately this latitude down to Cape Hatteras, North Carolina. Third, any samples unanalyzed on the research vessel were returned to the laboratory and measured. Fourth, the data were interpreted, and publications and presentations were prepared.

03 NATURAL GAS↗
DOE OSTI2023

An Extensible High Energy Density Modeling Tool for Extreme Regimes

The overreaching goal of the project is to develop a simulation capability to model an entire High Energy Density (HED) target heated by an X-ray Free Electron Laser (XFEL) beam including the surrounding material with a focus on target material associated with subsequent shots. Our primary objective is to study target fratricide problems, where radiation/debris from the current shot degrade the target for subsequent shots. This work will have a large impact on research being conducted at HED facilities where the quality of data is directly related to the effective repetition rate of the driver, which is often limited by target fratricide problems. This project focuses on a stream of closely spaced droplet targets that are appropriate for new very high repetition rate sources such as the ~1 MHz LCLS-II upgraded XFEL. The capability of the PISALE (Pacific Island Structured-AMR with ALE) code is extended to model this class of problems. We summarize the capability and improvements made to the HED branch of the PISALE code. We discuss our simulations of target fratricide for small (5 micron) hydrogen droplets heated by an XFEL beam at SLAC. We also compare simulations of the initial dynamics of larger (50 micron) water droplets, heated by the same XFEL beam, with experimental data. We briefly discuss training, dissemination, and related activities associated with this project.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

AATTENUATION—The Atmospheric Attenuation Model for CSP Tower Plants: A Look-Up Table for Operational Implementation

Attenuation of solar radiation between the receiver and the heliostat field in concentrated solar power (CSP) tower plants can reduce the overall system performance significantly. The attenuation varies strongly with time and the average attenuation at different sites might also vary strongly from each other. If no site specific attenuation data is available, the optimal plant design cannot be determined and rough estimations of the attenuation effect are required leading to high uncertainties of yield analysis calculations. The attenuation is caused mainly by water vapor content and aerosol particles in the lower atmospheric layer above ground. Although several on-site measurement systems have been developed during recent years, attenuation data sets are usually not available to be included during the plant project development. An Atmospheric Attenuation (AATTENUATION) model to derive the atmospheric transmittance between a heliostat and receiver on the basis of common direct normal irradiance (DNI), temperature, relative humidity, and barometric pressure measurements was developed and validated by the authors earlier. The model allows the accurate estimation of attenuation for sites with low attenuation and gives an estimation of the attenuation for less clear sites. However, the site-dependent coefficients of the AATTENUATION model had to be developed individually for each site of interest, which required time-consuming radiative transfer simulations, considering the exact location and altitude, as well as the pre-dominant aerosol type at the location. This strongly limited the application of the model despite its typically available input data. In this manuscript, a look-up table (LUT) is presented which enables the application of the AATTENUATION model at the site of interest without the necessity to perform the according complex radiative transfer calculations for each site individually. This enables the application of the AATTENUATION model for virtually all resource assessments for tower plants and in an operational mode in real time within plant monitoring systems around the world. The LUT also facilitates the generation of solar attenuation maps on the basis of long-term meteorological data sets which can be considered during resource assessment for CSP tower plant projects. The LUTs are provided together with this manuscript as supplementary files. The LUT for the AATTENUATION model was developed for a solar zenith angle (SZA) grid of 1°, an altitude grid of 100 m, 7 different standard aerosol types and the standard AFGL atmospheres for mid-latitudes and the tropics. The LUT was tested against the original version of the AATTENUATION model at 4 sites in Morocco and Spain, and it was found that the additional uncertainty introduced by the application of the LUT is negligible. With the information of latitude, longitude, altitude above mean sea level, DNI, relative humidity (RH), ambient temperature (Tair), and barometric pressure (bp), the attenuation can be now derived easily for each site of interest.

14 SOLAR ENERGY↗
DOE OSTI2023

Modeling and Simulation of Xe-100-type Pebble Bed Gas-Cooled Reactor with SCALE

The US Department of Energy (DOE) announced the Advanced Reactor Demonstration Program (ARDP) to accelerate the deployment of advanced reactor concepts. Awardees of ARDP funds are expected to demonstrate the operation of an advanced reactor within 7 years of receiving the award. X-Energy’s advanced reactor concept, the Xe-100, was selected as one of two advanced reactor concepts to receive funding to demonstrate the operation of its high-temperature gas-cooled pebble-bed reactor before the end of this decade. As a result of this push to bring advanced reactors to maturation and commercialization, transition and deployment scenario studies are being performed under the Systems Analysis and Integration (SA&I) campaign within the DOE Office of Nuclear Energy (DOE-NE) to evaluate the transition of the current US commercial fleet of light-water reactors (LWRs) to a future fleet of advanced reactors consisting of a mix of ARDP type reactor concepts and advanced LWRs. To accurately evaluate the front- and back-end resource requirements, it is important to perform reactor physics calculations to determine the discharge burnup and isotopic content, fuel residence time, as well as other parameters. For this purpose, a summer project funded by the SA&I campaign allowed for the setup of SCALE models for full-core Xe-100 type high-temperature gas-cooled pebble-bed reactor and a Xe-100 type slice using publicly available information. The core-averaged equilibrium compositions and zone-wise equilibrium compositions for the slice and 3D models, respectively, were obtained following an iterative depletion method developed by Bostelmann et al. using SCALE’s reactor physics sequence TRITON. The slice model was used with TRITON to generate burnup-dependent cross section libraries at different temperatures which can be used with SCALE’s ORIGAMI code to rapidly determine fuel inventory and therefore to perform quick sensitivity studies on parameters such as the pebble location in the core. The SCALE/TRITON transport and depletion calculation for the Xe-100 type slice model indicates that the isotopic concentrations are in good agreement at 1,300 effective full power days (EFPD) for 235 U. An analysis of 236 U results match 239 Pu results would seem to indicate a typographical error in Mulder and Boyes wherein the reported results of 236 U and 239 Pu are reversed. In addition to SCALE/TRITON calculations, a new capability within SCALE/ORIGAMI for the simulation of pebble-bed reactors was used to study the burnup sensitivity with respect to the pebble pathway through the core. The SCALE/ORIGAMI results show that pebbles that travel closer to the reflector for the entire depletion history have a higher burnup than pebbles that travel through the middle of the core because of the higher thermal to fast flux ratio near the reflector. Consequently, a pebble’s burnup is strongly affected by the pebble’s pathway for each pass. Additional phenomena such as temperature distributions in the core and different travel times of the pebbles in the individual radial zones further affect the burnup distribution. The sensitivity of the discharge vector to the pebble pathways taken during each pass can be evaluated in the future using SCALE/ORIGAMI now that the SCALE inputs have been established.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Natural Charge-Transfer Analysis: Eliminating Spurious Charge-Transfer States in Time-Dependent Density Functional Theory via Diabatization, with Application to Projection-Based Embedding

For many types of vertical excitation energies, linear-response time-dependent density functional theory (LR-TDDFT) offers a useful degree of accuracy combined with unrivaled computational efficiency, although charge-transfer excitation energies are often systematically and dramatically underestimated, especially for large systems and those that contain explicit solvent. As a result, low energy electronic spectra of solution-phase chromophores often contain tens to hundreds of spurious charge-transfer states, making LR-TDDFT needlessly expensive in bulk solution. More nefariously, intensity borrowing by the low-energy charge-transfer states can affect intensities of the valence excitations even if those excitation energies are accurate. At higher excitation energies, it is difficult to distinguish spurious CT states from genuine charge-transfer-to-solvent (CTTS) excitations. In this work, we introduce an automated diabatization scheme that enables fast and effective screening of the CTTS acceptor space in bulk solution. Our procedure introduces the concept of “natural charge-transfer orbitals”, which provide a means to isolate characteristic pairs of orbitals that are most likely to participate in a CTTS excitation. The projection of these orbitals onto solvent-centered virtual orbitals provides a criterion for defining the most important solvent molecules in a given excitation. We apply this method to analyze an ab initio molecular dynamics (MD) trajectory of I-(aq) and report the lowest-energy CTTS band in the absorption spectrum. Our results are in excellent agreement with experimental measurements for bulk I-(aq), and only one-third of the water molecules in the I-(H2O)96 simulation cell need to be described with LR-TDDFT in order to obtain excitation energies that are converged to < 0.1 eV. The tools introduced herein will improve the accuracy, efficiency, and usability of LR-TDDFT in solution-phase environments

Carter-Fenk, Kevin D.↗
DOE OSTI2025

Shrub Expansion Can Counteract Carbon Losses From Warming Tundra

Arctic warming is causing substantial compositional, structural, and functional changes in tundra vegetation including shrub and tree-line expansion and densification. However, predicting the carbon trajectories of the changing Arctic is challenging due to interacting feedbacks between vegetation composition and structure, and surface characteristics. We conduct a sensitivity analysis of the current-date to 2100 projected surface energy fluxes, soil carbon pools, and CO 2 fluxes to different shrub expansion rates under future emission scenarios (intermediate—RCP4.5, and high—RCP8.5) using the Arctic-focused configuration of E3SM Land Model (ELM). We focus on Trail Valley Creek (TVC), an upland tundra site in the western Canadian Arctic, which is experiencing shrub densification and expansion. We find that shrub expansion did not significantly alter the modeled surface energy and water budgets. However, the carbon balance was sensitive to shrub expansion, which drove higher rates of carbon sequestration as a consequence of higher shrubification rates. Thus, at low shrub expansion rates, the site would become a carbon source, especially under RCP8.5, due to higher temperatures, which deepen the active layer and enhance soil respiration. At higher shrub expansion rates, TVC would become a net CO 2 sink under both Representative Concentration Pathway scenarios due to higher shrub productivity outweighing temperature-driven respiration increase. Our simulations highlight the effect of shrub expansion on Arctic ecosystem carbon fluxes and stocks. We predict that at TVC, shrubification rate would interact with climate change intensity to determine whether the site would become a carbon sink or source under projected future climate.

Yazbeck, Theresia [The Ohio State Univ., Columbus,↗
DOE OSTI2024

Declining groundwater storage expected to amplify mountain streamflow reductions in a warmer world

Abstract Groundwater interactions with mountain streams are often simplified in model projections, potentially leading to inaccurate estimates of streamflow response to climate change. Here, using a high-resolution, integrated hydrological model extending 400 m into the subsurface, we find groundwater an important and stable source of historical streamflow in a mountainous watershed of the Colorado River. In a warmer climate, increased forest water use is predicted to reduce groundwater recharge resulting in groundwater storage loss. Losses are expected to be most severe during dry years and cannot recover to historical levels even during simulated wet periods. Groundwater depletion substantially reduces annual streamflow with intermittent conditions predicted when precipitation is low. Expanding results across the region suggests groundwater declines will be highest in the Colorado Headwater and Gunnison basins. Our research highlights the tight coupling of vegetation and groundwater dynamics and that excluding explicit groundwater response to warming may underestimate future reductions in mountain streamflow.

Carroll, Rosemary W. H. (ORCID:0000000293028074)↗
DOE OSTI2024

Hawaii Solar Desalination Project

This project built the world’s largest Forward Osmosis (FO) solar thermal desalination plant at the NELHA Hawaii Ocean Science and Technology Park for a high visibility “on sun” demonstration of seawater desalination for agricultural applications. The project included re-commissioning an existing 2MW micro-dish solar thermal array and coupling it to a next-generation 500m3/day FO system. The purpose of the project was to validate FO at commercial scale; to verify that the water produced is safe for potential downstream agricultural users; to gather data on capital cost, energy consumption and operating expense for the technology; and to demonstrate that FO can be successfully coupled to low-grade thermal resources. The plant implemented advancements in FO component technology, including hot nano-filtration, polymeric heat exchangers, draw solutions, and improved FO membranes, and operated from June 2022 to September 2023 - producing 30gpm of permeate water. Thermal energy was below 30kWh/m 3 during operation, establishing a new benchmark in thermal desalination technology, with recovery rates at times exceeding 65%, well above what commercial RO systems can achieve. Combining the plant capital cost (CAPEX) and the operating expenses (OPEX) yields a Levelized Cost of Water (LCOW) that is competitive with existing carbon-intensive technologies such as RO. The ability of the plant to operate from a renewable resource paves the way toward a low-carbon desalination future using low-grade thermal resources.

14 SOLAR ENERGY↗
DOE OSTI2020

Small-Scale Drying: FY2020 Interim Report

This report documents the interim experimental status of small-scale drying tests currently being performed at Pacific Northwest National Laboratory. These small-scale drying tests are to develop the technical bases for sensors, techniques, and approaches that will be used to address the challenges faced when determining moisture content from gas samples taken at the North Anna Nuclear Generating Station for the High Burnup Demonstration Project. Specifically, the purpose of these tests is to support Sandia National Laboratories gas sample methods and analyses through a series of small-scale experiments. Key focus areas include performing tests to: • Correlate sample bottle measurements to in-cask conditions • Estimate the amount of trapped and absorbed water on cask features and surfaces that can contribute to water vapor • Assess the accuracy of the hygrometer used in the measurements under similar conditions • Identify additional methods for measuring humidity in casks easily and accurately using lessons-learned from Sandia National Laboratories, including direct gravimetric and isotopic tracer techniques. To address these topics this report outlines a series of five tests and any data collected to date that were planned for FY 2020 that include 1) humidity measurement method development, 2) gas bottle sampling tests, 3) surface drying tests on cladding, 4) small-scale drying of cladding, and 5) small-scale drying of guide-tube/dashpots. This interim report documents the experimental background, design and progress of these small-scale drying tests. Further data gathered will be summarized in the FY 2021 report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

SAM Co-Development to Support Fluoride-salt-cooled High-temperature Reactor Design and Licensing (CRADA 2018-18177 Final Report)

This project aims to raise the SAM code's technical and commercial maturity level to enable the Kairos Power ("Kairos") to use SAM to support its KP-FHR design analysis and licensing application. Argonne National Laboratory ("Argonne") has actively developed and maintained SAM, a modern system-level analysis tool for advanced nonlight water reactors safety analysis. Kairos is currently actively pursuing development of an FHR design and associated technology, and consequently requires a pedigreed safety analysis tool. The purpose of this project is to increase the maturity of the SAM code for the modeling and simulation of the KP-FHR design, thus enabling its use in safety analyses that support licensing application. Argonne will primarily be responsible for software design, development, and testing; while Kairos will be responsible for software requirements, assessment of software capabilities, needs, gaps, and priorities, and development of proprietary models. The research and development activities for the joint SAM development project include: a series of identification and prioritization studies on design characteristics, event sequences, relevant phenomena, and software capabilities; SAM capability enhancements for specific KP-FHR systems and components; performing code verification and validations; integrating uncertainty quantification (UQ), model calibration, and sensitivity analysis (SA) techniques in safety analyses; and raising the software quality rigor level for commercial-grade applications.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗