Search NASA⌕ Search

SEARCH · Search NASA

Results for “HOT SPOT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The 3-D inelastic analysis methods for hot section components: Brief description

Advanced 3-D inelastic structural/stress analysis methods and solution strategies for more accurate yet more cost-effective analysis of components subjected to severe thermal gradients and loads in the presence of mechanical loads, with steep stress and strain gradients are being developed. Anisotropy, time and temperature dependent plasticity and creep effects are also addressed. The approach is to develop four different theories, one linear and three higher order theories (polynomial function, special function, general function). The theories are progressively more complex from linear to general function in order to provide streamlined analysis capability with increasing accuracy for each hot section component and for different parts of the same component according to the severity of the local stress, strain and temperature gradients associated with hot spots, cooling holes and surface coating cracks. To further enhance the computational effectiveness, the higher order theories will have embedded singularities (cooling passages, for example) in the generic modeling region. Each of the four theories consists of three formulation models derivable from independent theoretical formulations. These formulation models are based on: (1) mechanics of materials; (2) special finite elements; and (3) an advanced formulation to be recommended by the contractor.

Chamis, C. C.↗
NASA NTRS1984

Simulation study of a new inverse-pinch high Coulomb transfer switch

A simulation study of a simplified model of a high coulomb transfer switch is performed. The switch operates in an inverse pinch geometry formed by an all metal chamber, which greatly reduces hot spot formations on the electrode surfaces. Advantages of the switch over the conventional switches are longer useful life, higher current capability and lower inductance, which improves the characteristics required for a high repetition rate switch. The simulation determines the design parameters by analytical computations and comparison with the experimentally measured risetime, current handling capability, electrode damage, and hold-off voltages. The parameters of initial switch design can be determined for the anticipated switch performance. Results are in agreement with the experiment results. Although the model is simplified, the switch characteristics such as risetime, current handling capability, electrode damages, and hold-off voltages are accurately determined.

Choi, S. H.↗
NASA NTRS1984

Thin-film reliability and engineering overview

The reliability and engineering technology base required for thin film solar energy conversions modules is discussed. The emphasis is on the integration of amorphous silicon cells into power modules. The effort is being coordinated with SERI's thin film cell research activities as part of DOE's Amorphous Silicon Program. Program concentration is on temperature humidity reliability research, glass breaking strength research, point defect system analysis, hot spot heating assessment, and electrical measurements technology.

Ross, R. G., Jr.↗
NASA NTRS1985

Archean sedimentary systems and crustal evolution

Current knowledge of preserved Archean sedimentary rocks suggests that they accumulated in at least three major depositional settings. These are represented generally by sedimentary units: (1) in early Archean, pre-3.0 Ga old greenstone belts, (2) on late Archean sialic cratons, and (3) in late Archean, post-3.0 Ga old greenstone belts. Research suggests that the Archean was characterized by at least two distinctive and largely diachronous styles of crustal evolution. Thick, stable early Archean simatic platforms, perhaps analogous to modern oceanic islands formed over hot spots, underwent a single cycle of cratonization to form stable continental blocks in the early Archean. Later formed Archean continents show a two stage evolution. The initial stage is reflected in the existence of older sialic material, perhaps representing incompletely cratonized areas or microcontinents of as yet unknown origin. During the second stage, late Archean greenstone belts, perhaps analogous to modern magmatic arcs or back arc basins, developed upon or adjacent to these older sialic blocks. The formation of this generation of Archean continents was largely complete by the end of the Archean. These results suggest that Archean greenstone belts may represent a considerable range of sedimentological and tectonic settings.

Lowe, D. R.↗
NASA NTRS1984

The Mauna Loa sulfur flow as an analog to secondary sulfur flows on Io

Independent evidence suggests that both sulfur and silicate materials exist on the surface of Io. Spectral data indicate the presence of sulfur compounds, some of which are suggested to be of fumarolic origin. Morphological evidence and inferences of the physical properties of some land-forms suggest that silicate volcanism has occurred, which would involve temperatures 650 C or greater. Because the liquidus of sulfur is only about 115 C, it is likely that sulfur in close proximity to 'hot spots' or to active silicate volcanic areas on Io would be melted and mobilized as flows. The Mauna Loa sulfur flow may serve as an analog for such flows, as it consists of fumarolic sulfur that was melted as a consequence of a basaltic eruption and produced a small flow superimposed on silicate lavas.

Greeley, R.↗
NASA NTRS1984

Jupiter's and Saturn's fine-scale magnetic fields

In situ magnetic field data from Jupiter and Saturn are used to interpret earth-based microwave observations for all areas except Branson's hot spot on Jupiter. It is found that Jupiter's field is strongly dipolar but has large high-order moments compared with the magnetic field of the earth. Decametric emissions of Jupiter have a complex rotational pattern which appears to have been stable since 1980. Microwave observations Saturn's radio emissions were strongly asymmetric along the rotational axis, indicating the presence of longitudinal variations in the magnetic fields a thousand kilometers from the cloud tops. The magnetic fields within a few thousand kilmeters of the cloud tops of both Jupiter and Saturn could not be identified.

Warwick, J. W.↗
NASA NTRS1984

3 keV to 2 MeV observations of four gamma-ray bursts

Simultaneous X and gamma ray spectra were obtained for four gamma ray burst events using satellite instrumentation. The P78-1 satellite proportional counters recorded X-ray data in the 3-10 keV range, while Pioneer Venus Orbiter and ISEE 3 sensors had a 3 keV lower limit for events. The positively correlated data covered the events GB 790307, 790325, 790504, and 790731. The time histories of the X and gamma ray energies did not correlate well. The post-gamma ray phase of GB 790307 displayed features of simple cooling, and in conjunction with soft X-ray data suggested an origin in an optically thin fireball. However, the data were equally well-fitted by a model of an emitting hot spot on a neutron star. The data negated any concept that gamma ray bursts evolve similarly to classical X-ray bursts.

Laros, J. G.↗
NASA NTRS1985

Ultraviolet, optical, and infrared observations of the intermediate polar TV Columbae

Forty-three IUE spectra of the X-ray discovered, triply periodic cataclysmic variable, TV Col are examined. The results show that the UV flux varies with the four-day period discovered by Motch in 1981. By fitting continuum models to the UV and optical fluxes, it is inferred that this modulation corresponds to the periodic heating of a normally 9000 K source within the binary system due to reprocessing of beamed X-ray and (possibly) EUV radiation from the vicinity of the degenerate star. The observed flux from this heated source is consistent with its origin at either the disk hot spot or the secondary star. Phasing arguments, however, favor the identification of the latter as the primary reprocessing site in the system. The infrared observations are not consistent with the model proposed by Watts et al. in 1982 and imply that the four-day period does not correspond to the orbital period of the binary.

Mateo, M.↗
NASA NTRS1984

The integration of bypass diodes with terrestrial photovoltaic modules and arrays

Bypass diodes are often required to limit the potential for reverse voltage 'hot-spot' heating in high voltage arrays or in arrays that undergo periodic operation near the short-circuit point. In addition, when properly applied, bypass diodes can minimize the effect of shadowing and various internal module failures on the array energy output. This paper discusses the mechanical and electrical integration of bypass diodes beginning with the array-level considerations which influence the selection of an implementation approach. Concepts for the mounting of these diodes, both internally within the module encapsulant and externally to the exposed rear surface of the module, are described. Factors affecting the reliability of bypass diodes, including the control of junction temperature through adequate heat sinking and the derating of reverse voltage, are discussed.

Shepard, N. F., Jr.↗
NASA NTRS1985

VLBI observations of the jet in Cygnus A

The luminous radio galaxy Cyg A was observed with a five-station US VLBI array at 5 GHz at epoch 1983.25. The jet can be followed from the core to a distance of 9 milliarcsec (mas). Within the limited dynamic range of these observations, it is one-sided (jet:counterjet ratio greater than 12:1). If this one-sidedness is due to Doppler boosting, then (1) the jet must decelerate to a mildly relativistic velocity on a kiloparsec scale, (2) the source cannot lie with 30 deg of the plane of the sky. The jet points directly at the base of the kpc-scale jet seen by Perley, Dreher, and Cowan (1984); the curvature occurs primarily or entirely on a scale of 10-100 kpc. The jet brightness falls off more slowly inside 1 kpc than in other powerful sources. A search for compact structure in the three bright hot spots revealed no structure lower than 3 mas in size with flux greater than 6 mJy.

Linfield, R.↗
NASA NTRS1985

Infrared variability of SS 433

New JHKLM photometry of SS 433 showing short time scale variabilities is reported for the period of 1983 July 16-22 UT. The entire body of infrared data included in this paper, Giles et al. (1980), and Catchpole et al. (1981), is examined with reference to periods of 164 days and 13.08 days. Comparison of the infrared light curves with the optical light curves of Leibowitz et al. (1984) makes it possible to conclude, within the context of an accretion disk model, that the majority of the infrared flux in the SS 433 system comes from the disk, and that the hot spot responsible for the 'hump' in the visual and infrared light curves has a color similar to the average of the disk. A two-dimensional Fourier analysis of the infrared data suggests that the brightness maximum occurs when, seen from the compact star, the noncompact companion passes through a fixed elongation relative to the disk line of nodes with the orbital plane, if the precession is prograde.

Kodaira, K.↗
NASA NTRS1985

Crystalline-silicon reliability lessons for thin-film modules

The reliability of crystalline silicon modules has been brought to a high level with lifetimes approaching 20 years, and excellent industry credibility and user satisfaction. The transition from crystalline modules to thin film modules is comparable to the transition from discrete transistors to integrated circuits. New cell materials and monolithic structures will require new device processing techniques, but the package function and design will evolve to a lesser extent. Although there will be new encapsulants optimized to take advantage of the mechanical flexibility and low temperature processing features of thin films, the reliability and life degradation stresses and mechanisms will remain mostly unchanged. Key reliability technologies in common between crystalline and thin film modules include hot spot heating, galvanic and electrochemical corrosion, hail impact stresses, glass breakage, mechanical fatigue, photothermal degradation of encapsulants, operating temperature, moisture sorption, circuit design strategies, product safety issues, and the process required to achieve a reliable product from a laboratory prototype.

Ross, R. G., Jr.↗
NASA NTRS1985

Sea floor swells and mantle plumes

Most of the intraplate oceanic hot spots are located on the crest of broad topographic swells in the sea floor. These swells have Gaussian shaped profiles, with up to 1.6 km of relief and half widths of 200 to 300 km. Swells are accompanied by positive geoid height anomalies with amplitudes of 6 to 8 m. In the Atlantic and Pacific basins swells cover an area equal to 10% of the Earth's surface. Next to boundary layer contraction, swells are the most important cause of uplift and subsidence in oceanic lithosphere. Calculation of buoyancy supported topography and geoid height were combined with uplift data from laboratory experiments to assess whether sea floor swell can be produced by mantle plumes. The critical constraints are: (1) swell topographic profiles; (2) geoid height/topographic height ratios; and (3) uplift rates, estimated to be 0.2 km/ma.

Olson, P.↗
NASA NTRS1985

Wilson study cycles: Research relative to ocean geodynamic cycles

The effects of conversion of Atlantic (rifted) margins to convergent plate boundaries; oceanic plateaus at subduction zones; continental collision and tectonic escape; southern Africa rifts; and global hot spot distribution on long term development of the continental lithosphere were studied.

Kidd, W. S. F.↗
NASA NTRS1986

Geochemical and isotopic constraints on the tectonic setting of Serra dos Carajas belt, eastern Para, Brazil

The lower part of the Serra dos Carajas belt is the metavolcanic and metasedimentary Grao para Group (GPG). The GPG is thought to unconformably overlie the older (but undated) Xingu Complex, composed of medium and high-grade gneisses and amphibolite and greenstone belts. The geochemical data indicate that the GPG has many features in common with ancient and modern volcanic suites erupted through continental crust. The mafic rocks clearly differ from those of most Archean greenstone belts, and modern MORB, IAB, and hot-spot basalts. The geological, geochemical, and isotopic data are all consistent with deposition on continental crust, presumably in a marine basin formed by crustal extension. The isotopic data also suggest the existence of depleted mantle as a source for the parent magmas of the GPG. The overall results suggest a tectonic environment, igneous sources, and petrogenesis similar to many modern continental extensional basins, in contrast to most Archean greenstone belts. The Hammersley basin in Australia and the circum-Superior belts in Canada may be suitable Archean and Proterozoic analogues, respectively.

Olszewski, W. J., Jr.↗
NASA NTRS1986

Computational analysis of the SSME fuel preburner flow

A computational fluid dynamics model which simulates the steady state operation of the SSME fuel preburner is developed. Specifically, the model will be used to quantify the flow factors which cause local hot spots in the fuel preburner in order to recommend experiments whereby the control of undesirable flow features can be demonstrated. The results of a two year effort to model the preburner are presented. In this effort, investigating the fuel preburner flowfield, the appropriate transport equations were numerically solved for both an axisymmetric and a three-dimensional configuration. Continuum's VAST (Variational Solution of the Transport equations) code, in conjunction with the CM-1000 Engineering Analysis Workstation and the NASA/Ames CYBER 205, was used to perform the required calculations. It is concluded that the preburner operational anomalies are not due to steady state phenomena and must, therefore, be related to transient operational procedures.

Wang, T. S.↗
NASA NTRS1986

Archean sedimentary styles and early crustal evolution

The distinctions between and implications of early and late Archean sedimentary styles are presented. Early Archean greenstone belts, such as the Barberton of South Africa and those in the eastern Pilbar Block of Australia are characterized by fresh or slightly reworked pyroclastic debris, orthochemical sediments such as carbonates, evaporites, and silica, and biogenic deposits including cherts and stromatolitic units. Terrigenous deposits are rare, and it is suggested that early Archean sediments were deposited on shallow simatic platforms, with little or no components derived from sialic sources. In contrast, late Archean greenstone belts in the Canadian Shield and the Yilgarn Block of Australia contain coarse terrigenous clastic rocks including conglomerate, sandstone, and shale derived largely from sialic basement. Deposition appears to have taken place in deepwater, tectonically unstable environments. These observations are interpreted to indicate that the early Archean greenstone belts formed as anorogenic, shallow water, simatic platforms, with little or no underlying or adjacent continental crust, an environment similar to modern oceanic islands formed over hot spots.

Lowe, D. R.↗
NASA NTRS1985

Life-cycle costs of high-performance cells

A life cycle cost analysis of high efficiency cells was presented. Although high efficiency cells produce more power, they also cost more to make and are more susceptible to array hot-spot heating. Three different computer analysis programs were used: SAMICS (solar array manufacturing industry costing standards), PVARRAY (an array failure mode/degradation simulator), and LCP (lifetime cost and performance). The high efficiency cell modules were found to be more economical in this study, but parallel redundancy is recommended.

Daniel, R.↗