Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Temperature Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Photoluminescence properties and efficient energy transfer of Ce3+/Eu2+ activated K2Ba7Si16O40 phosphors

Highlights: • K{sub 2}Ba{sub 7}Si{sub 16}O{sub 40}:Ce{sup 3+}/Eu{sup 2+} phosphors have been synthesized by a high temperature solid-state method with CO atmosphere. • The resonance-type energy transfer by dipole-dipole interaction from Ce{sup 3+} to Eu{sup 2+} in K{sub 2}Ba{sub 7}Si{sub 16}O{sub 40} is demonstrated. • The critical distance between Ce{sup 3+} and Eu{sup 2+} ions is calculated to be 25.06 Å. • The thermal activation energy of K{sub 2}Ba{sub 7}Si{sub 16}O{sub 40} is calculated to be 0.26 eV. - Abstract: Ce{sup 3+}/Eu{sup 2+} activated K{sub 2}Ba{sub 7}Si{sub 16}O{sub 40} phosphors have been synthesized via a high-temperature solid-state method with CO atmosphere. Under ultraviolet (UV) light pump, the photoluminescence (PL) spectra of K{sub 2}Ba{sub 7}Si{sub 16}O{sub 40}: Ce{sup 3+} is composed of a broadband from 300 nm to 500 nm ascribed to the spin-allowed 5d–4f transition of Ce{sup 3+} ions. The optimal concentration is 8% for Ce{sup 3+} single doped K{sub 2}Ba{sub 7}Si{sub 16}O{sub 40} due to the ernergy dispersion between Ce{sup 3+} ions and the critical distance between Ce{sup 3+} ions is 15.05 Å. K{sub 2}Ba{sub 7}Si{sub 16}O{sub 40}: Eu{sup 2+} emits a broad green emission peaking at 498 nm. The spectral overlap between the emission of Ce{sup 3+} and the excitation of Eu{sup 2+} suggests the resonance-type energy transfer from Ce{sup 3+} to Eu{sup 2+}, which is further demonstrated by the decay curves of K{sub 2}Ba{sub 7}Si{sub 16}O{sub 40}: 8 mol% Ce{sup 3+}, m Eu{sup 2+}. The critical distance between Ce{sup 3+} and Eu{sup 2+} ions is calculated to be 25.06 Å by Dexter’s theory. Furthermore, the energy transfer mechanism is dipole-dipole interaction. In addition, the thermal activation energy is calculated to be 0.26 eV. The CIE coordinates can be tuned from blue to green by increasing Eu{sup 2+} ions. All results suggest that K{sub 2}Ba{sub 7}Si{sub 16}O{sub 40}: Ce{sup 3+}, Eu{sup 2+} is potentially useful for near-UV pumped white LEDs.

36 MATERIALS SCIENCE↗

Synthesis, physicochemical characterization and crystallographic twinning of Li{sub 2}ZnSnS{sub 4}

Li{sub 2}ZnSnS{sub 4} is a new diamond-like semiconductor, which is of interest as a host structure for the creation of potentially interesting electronic, magnetic and photovoltaic materials. The compound was synthesized via traditional high-temperature solid-state methods and was predicted to adopt a wurtz-stannite structure with all atoms possessing tetrahedral environments. Initial analysis of single-crystal X-ray diffraction data indicated crystallographic disorder that upon closer examination violated basic chemical principles. The structure was subsequently re-evaluated and the apparent 'disorder' problem was found to be the result of pseudo-merohedral twinning. The crystal structure was finally solved in the monoclinic space group Pn, which resulted in a chemically reasonable model. The refinement converged with R1=1.68% (for all data). Additional characterization of the sample, including diffuse reflectance, thermal analysis and second harmonic generation measurements, was also performed. - Abstract: Li{sub 2}ZnSnS{sub 4} is a new diamond-like semiconductor synthesized via high-temperature solid-state methods. Analysis of single-crystal X-ray diffraction data indicated that the structure was a pseudo-merohedral twin crystallizing in space group Pn and related to the wurtz-stannite structure. Additional characterization of the sample is reported. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Luminescence properties of Ca{sub 0.65}La{sub 0.35}F{sub 2.35}:Yb{sup 3+}, Er{sup 3+} with enhanced red emission via upconversion

Graphical abstract: Under 980 nm excitation, Ca{sub 0.65}La{sub 0.35}F{sub 2.35}:20 mol.%Yb{sup 3+}, xEr{sup 3+} showed intense red upconversion luminescence, which was ascribed to {sup 4}F{sub 9/2} {yields} {sup 4}I{sub 15/2} transition of Er{sup 3+}. The ground-state absorption (GSA), excited-state absorption (ESA) and energy transfer (ET) processes between Er{sup 3+}/Yb{sup 3+} ions and Er{sup 3+}/Er{sup 3} ions were involved in the enhanced red emission mechanism. . Research highlights: {yields} Yb{sup 3+}/Er{sup 3+} codoped Ca{sub 0.65}La{sub 0.35}F{sub 2.35} materials with intense red emission via upconversion were prepared by a high temperature solid-state method. {yields} Ca{sub 0.65}La{sub 0.35}F{sub 2.35}:20 mol.%Yb{sup 3+}, xEr{sup 3+} showed intense red upconversion luminescence, which was ascribed to {sup 4}F{sub 9/2} {yields} {sup 4}I{sub 15/2} transition of Er{sup 3+}. {yields} The green and red emissions are two-photon processes, while both energy transfers between Yb{sup 3+}/Er{sup 3+} and Er{sup 3+}/Er{sup 3+} are involved in the red emission mechanism of the Ca{sub 0.65}La{sub 0.35}F{sub 2.35}:20 mol.%Yb{sup 3+}, xEr{sup 3+} materials. -- Abstract: Yb{sup 3+}/Er{sup 3+} codoped Ca{sub 0.65}La{sub 0.35}F{sub 2.35} materials with intense red emission via upconversion were prepared by a high temperature solid-state method. Based on the upconversion luminescence properties investigations, it was found that, under 980 nm excitation, Ca{sub 0.65}La{sub 0.35}F{sub 2.35}:20 mol.%Yb{sup 3+}, xEr{sup 3+} showed intense red upconversion luminescence, which was ascribed to {sup 4}F{sub 9/2} {yields} {sup 4}I{sub 15/2} transition of Er{sup 3+}, although both green and red emissions could be detected. It was also found that the green and red emissions originated the two photon processes, and the ground-state absorption (GSA), excited-state absorption (ESA) and energy transfer (ET) processes between Er{sup 3+}/Yb{sup 3+} ions and Er{sup 3+}/Er{sup 3} ions were involved in the enhanced red emission mechanism.

36 MATERIALS SCIENCE↗

Growth mechanisms of plasma-assisted molecular beam epitaxy of green emission InGaN/GaN single quantum wells at high growth temperatures

The results of the growth of thin (∼3 nm) InGaN/GaN single quantum wells (SQWs) with emission wavelengths in the green region by plasma-assisted molecular beam epitaxy are present. An improved two-step growth method using a high growth temperature up to 650 °C is developed to increase the In content of the InGaN SQW to 30% while maintaining a strong luminescence intensity near a wavelength of 506 nm. The indium composition in InGaN/GaN SQW grown under group-III-rich condition increases with increasing growth temperature following the growth model of liquid phase epitaxy. Further increase in the growth temperature to 670 °C does not improve the photoluminescence property of the material due to rapid loss of indium from the surface and, under certain growth conditions, the onset of phase separation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A self-propagation high-temperature synthesis and annealing route to synthesis of wave-like boron nitride nanotubes

Highlights: ► Large quantities of wave-like BN nanotubes were synthesized by SHS-annealing method. ► The catalytic boron-containing porous precursor was produced by self-propagation high-temperature synthesis method. ► Three growth models were proposed to explain the growth mechanism of the wave-like BN nanotubes. - Abstract: Large quantities of boron nitride (BN) nanotubes were synthesized by annealing a catalytic boron-containing porous precursor in flowing NH{sub 3} gas at 1180 °C. The porous precursor was prepared by self-propagation high-temperature synthesis (SHS) method at 800 °C using Mg, B{sub 2}O{sub 3} and amorphous boron powder (α-B) as the starting materials. The porous precursor played an important role in large quantities synthesis of BN nanotubes. The as-synthesized product was characterized by X-ray diffractometer (XRD), Fourier transform infrared spectrometer (FTIR), Raman, Scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy (EDS), Transmission electron microscopy (TEM) and High-resolution transmission electron microscopy (HRTEM). Characterization results indicated that the BN nanotubes displayed wave-like inner structures with diameters in the range of 50–300 nm and average lengths of more than 10 μm. The possible growth mechanism of the BN nanotubes was also discussed.

36 MATERIALS SCIENCE↗

Summary Report of the FY24 DOE Contributions to the GIF VHTR CMVB

The Generation-IV Forum (GIF) Very-High-Temperature Reactor-Computational Methods Validation and Benchmark (VHTR-CMVB) initiative, involving organizations from Korea Atomic Energy Research Institute (KAERI) (South Korea), Institute of Nuclear and New Energy Technology of Tsinghua University (INET) (China), U.S. Department of Energy (DOE) (U.S.), Joint Research Centre (JRC) (Europe), and Japan Atomic Energy Agency (JAEA) (Japan), is dedicated to the verification and validation of tools for High-Temperature Gas-Cooled Reactors (HTGRs) analysis, using data shared by Computational Methods Validation and Benchmark (CMVB) signatories. For FY24, the US DOE CMVB has committed to several critical activities. Under WP1, led by the US, the integration of the High Temperature Gas Cooled Reactor - Pebble-Bed Module (HTR-PM) Phenomena Identification and Ranking Table (PIRT) into the comparative PIRT is progressing, with a new draft of the comparison tables issued earlier this year and currently being utilized by INET for their contribution. Neutronic validation efforts under WP3 include the preparation of the burnup analysis benchmark, preliminary calculations, and the development of reference models and results. In WP2, a validation exercise for hot gas mixing in the lower plenum of HTR-PM is in progress, using experimental data from INET (China) to validate modeling approaches. A model of the experimental facility has been developed using StarCCM+, with initial calculations slated for presentation at the GIF CMVB meeting this fall. Another WP2 activity focuses on validating numerical models for air-cooled Reactor Cavity Cooling System (RCCS) with experimental data from the Wisconsin Madison RCCS facility. A high-fidelity model, developed using NEK-RS, is currently being validated with available data from a low power forced convection test. These efforts are aimed at enhancing and confirming the accuracy of HTGR analysis tools, ensuring their alignment with experimental data and regulatory requirements.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Low-Temperature Synthesis, Structural Characterization, and Electrochemistry of Ni-Rich Spinel-like LiNi 2– y Mn y O 4 (0.4 ≤ y ≤ 1)

The thermal conversion of chemically delithiated layered Li 0.5 Ni 1-y Mn y O 2 (0.2 ≤ y ≤ 0.5) into spinel-like LiNi 2-y Mn y O 4 (0.4 ≤ y ≤ 1) has been systematically investigated. The formed spinel-like phases are metastable and cannot be accessed by a conventional high-temperature solid-state method. The layered-to-spinel transformation mechanism has been studied by the Rietveld refinement of in situ neutron diffraction as a function of temperature (25–300 °C). In particular, the ionic diffusion of Li and M ions is quantified at different temperatures. Electrochemistry of the metastable spinel-like phases obtained has been studied in lithium-ion cells. A bond valence sum map has been performed to understand the ionic diffusion of lithium ions in the Ni-rich layered, spinel, and rock-salt structures. The study can aid the understanding of the possible phases that could be formed during the cycling of Ni-rich layered oxide cathodes.

36 MATERIALS SCIENCE↗

Ion exchange and electrochemical evaluation of the microporous phosphate Li{sub 9}Fe{sub 7}(PO{sub 4}){sub 10}

A new lithium iron(III) phosphate, Li{sub 9}Fe{sub 7}(PO{sub 4}){sub 10}, has been synthesized and is currently under electrochemical evaluation as an anode material for rechargeable lithium-ion battery applications. The sample was prepared via the ion exchange reaction of Cs{sub 5}K{sub 4}Fe{sub 7}(PO{sub 4}){sub 10}1 in the 1 M LiNO{sub 3} solution under hydrothermal conditions at 200 deg. C. The fully Li{sup +}-exchanged sample Li{sub 9}Fe{sub 7}(PO{sub 4}){sub 10}2 cannot yet be synthesized by conventional high-temperature, solid-state methods. The parent compound 1 is a member of the Cs{sub 9-x}K{sub x}Fe{sub 7}(PO{sub 4}){sub 10} series that was previously isolated from a high-temperature (750 deg. C) reaction employing the eutectic CsCl/KCl molten salt. The polycrystalline solid 1 was first prepared in a stoichiometric reaction via conventional solid-state method then followed by ion exchange giving rise to 2. Both compounds adopt three-dimensional structures that consist of orthogonally interconnected channels where electropositive ions reside. It has been demonstrated that the Cs{sub 9-x}K{sub x}Fe{sub 7}(PO{sub 4}){sub 10} series possesses versatile ion exchange capabilities with all the monovalent alkali metal and silver cations due to its facile pathways for ion transport. 1 and 2 were subject to electrochemical analysis and preliminary results suggest that the latter can be considered as an anode material. Electrochemical results indicate that Li{sub 9}Fe{sub 7}(PO{sub 4}){sub 10} is reduced below 1 V (vs. Li) to most likely form a Fe(0)/Li{sub 3}PO{sub 4} composite material, which can subsequently be cycled reversibly at relatively low potential. An initial capacity of 250 mAh/g was measured, which is equivalent to the insertion of thirteen Li atoms per Li{sub 9+x}Fe{sub 7}(PO{sub 4}){sub 10} (x = 13) during the charge/discharge process (Fe{sup 2+} + 2e {yields} Fe{sup 0}). Furthermore, 2 shows a lower reduction potential (0.9 V), by approximately 200 mV, and much better electrochemical reversibility than iron(III) phosphate, FePO{sub 4}, highlighting the value of improving the ionic conductivity of the sample.

36 MATERIALS SCIENCE↗

Report on FY15 Alloy 617 Code Rules Development

Due to its strength at very high temperatures, up to 950°C (1742°F), Alloy 617 is the reference construction material for structural components that operate at or near the outlet temperature of the very high temperature gas-cooled reactors. However, the current rules in the ASME Section III, Division 5 Subsection HB, Subpart B for the evaluation of strain limits and creep-fatigue damage using simplified methods based on elastic analysis have been deemed inappropriate for Alloy 617 at temperatures above 650°C (1200°F) (Corum and Brass, Proceedings of ASME 1991 Pressure Vessels and Piping Conference, PVP-Vol. 215, p.147, ASME, NY, 1991). The rationale for this exclusion is that at higher temperatures it is not feasible to decouple plasticity and creep, which is the basis for the current simplified rules. This temperature, 650°C (1200°F), is well below the temperature range of interest for this material for the high temperature gas-cooled reactors and the very high temperature gas-cooled reactors. The only current alternative is, thus, a full inelastic analysis requiring sophisticated material models that have not yet been formulated and verified. To address these issues, proposed code rules have been developed which are based on the use of elastic-perfectly plastic (EPP) analysis methods applicable to very high temperatures. The proposed rules for strain limits and creep-fatigue evaluation were initially documented in the technical literature (Carter, Jetter and Sham, Proceedings of ASME 2012 Pressure Vessels and Piping Conference, papers PVP 2012 28082 and PVP 2012 28083, ASME, NY, 2012), and have been recently revised to incorporate comments and simplify their application. Background documents have been developed for these two code cases to support the ASME Code committee approval process. These background documents for the EPP strain limits and creep-fatigue code cases are documented in this report.

36 MATERIALS SCIENCE↗

The low salinity effect at high temperatures

The mechanism(s) of low salinity water flooding (LSWF) must be better understood at high temperatures and pressures if the method is to be applied in high T/P kaolinite-bearing sandstone reservoirs. We measured contact angles between a sandstone and an oil (acid number, AN = 3.98 mg KOH/g, base number, BN = 1.3 mg KOH/g) from a reservoir in the Tarim Field in western China in the presence of various water chemistries. We examined the effect of aqueous ionic solutions (formation brine, 100X diluted formation brine, and softened water), temperature (60, 100 and 140 °C) and pressure (20, 30, 40, and 50 MPa) on the contact angle. We also measured the zeta potential of the oil/water and water/rock interfaces to calculate oil/brine/rock disjoining pressures. A surface complexation model was developed to interpret contact angle measurements and compared with DLVO theory predictions. Contact angles were greatest in formation water, followed by the softened water, and low salinity water at the same pressure and temperature. Contact angles increased slightly with temperature, whereas pressure had little effect. DLVO and surface complexation modelling predicted similar wettability trends and allow reasonably accurate interpretation of core-flood results. Water chemistry has a much larger impact on LSWF than reservoir temperature and pressure. As a result, low salinity water flooding should work in high temperature and high pressure kaolinite-bearing sandstone reservoirs.

02 PETROLEUM↗

Improvements to PHISICS/RELAP5-3D{sup C} Capabilities for Simulating HTGRs

Accurate, high-resolution full core simulations of prismatic high temperature reactors for burnup and transient analysis remain a challenge. The cores are geometrically large, but some features are quite small (tri-structural isotropic (TRISO) particles, burnable poison pellets). The treatment of both neutron scattering in graphite and resonance capture are complex and not adequately captured using the methods traditionally used in High Temperature Gas-cooled Reactors (HTGR) and commonly used in Light Water Reactors (LWR). For transient analysis, temperature feedback is a function of the TRISO fuel form, but full core models cannot resolve phenomena at this scale without averaging over space and energy. For burnup calculations, a second level of heterogeneity must be resolved to capture the local effects of fuel and burnable poisons, while accurately propagating their effects through and between blocks. The HTGR Methods and Simulation group has been utilizing the INL-developed PHISICS/RELAP5-3D{sup C} (P/R), code suite for participation in the Organization for Economic Cooperation and Development (OECD) Modular High Temperature Gas Cooled Reactor (MHTGR) Benchmark, funded by the US Department of Energy (DOE) under the Advanced Reactor Technologies (ART) program. The MHTGR-350 benchmark consists of several lattice, steady-state and transient exercises, and the P/R code has been successfully applied to most of the cases defined. In addition to this code-to-code verification activity, it is planned that P/R will be validated using data from several Loss of Forced Cooling (LOFC) tests performed at the High Temperature Test Reactor (HTTR) in a joint effort with Japan Atomic Energy Agency (JAEA) under the Civil Nuclear Energy Working Group (CNWG) project. These verification and validation simulations will identify code and model discrepancies, sensitivities, and establish the current state-of-the-art in HTGR simulation. The Department of Astronautical, Electrical and Energy Engineering (DIAEE), 'Sapienza' University has been involved in the development of P/R since 2014 through various graduate and PhD student projects. In the framework of this collaboration the P/R optimization for application on the OECD MHTGR-350 and HTTR models will be carried out.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Thermomechanical Modeling of High-Temperature Bonded Interface Materials

In an automotive power electronics package, bonded interface materials play a critical role in providing a smooth heat dissipation path from the device to the coolant. However, these materials are susceptible to failure when the package gets exposed to repeated changes in its thermal environment and internal temperature variations. Under these thermal conditions, the coefficient of thermal expansion mismatch between the different component layers results in thermally induced stresses and consequently the delamination of the material from its adjoining surfaces or crack initiation and propagation within the material. Thermomechanical modeling offers a path to study the complex nature of these bonded materials, guides their design and selection, and, in conjunction with experimental results, plays an important role in predicting their lifetime. In this chapter, two modeling strategies - similar in approach and implementation but different in the underlying theory - are discussed in the context of high-temperature bonded materials. In addition, a short review of sintered silver is provided, as it is widely seen as a potentially promising and reliable bonded material for high-temperature applications.

36 MATERIALS SCIENCE↗

High temperature polymer degradation: Rapid IR flow-through method for volatile quantification

Accelerated aging of polymers at elevated temperatures often involves the generation of volatiles. These can be formed as the products of oxidative degradation reactions or intrinsic pyrolytic decomposition as part of polymer scission reactions. A simple analytical method for the quantification of water, CO 2 , and CO as fundamental signatures of degradation kinetics is required. Here, we describe an analytical framework and develops a rapid mid-IR based gas analysis methodology to quantify volatiles that are contained in small ampoules after aging exposures. The approach requires identification of unique spectral signatures, systematic calibration with known concentrations of volatiles, and a rapid acquisition FTIR spectrometer for time resolved successive spectra. Furthermore, the volatiles are flushed out from the ampoule with dry N2 carrier gas and are then quantified through spectral and time integration. This method is sufficiently sensitive to determine absolute yields of ~50 μg water or CO 2 , which relates to probing mass losses of less than 0.01% for a 1 g sample, i.e. the early stages in the degradation process. Such quantitative gas analysis is not easily achieved with other approaches. Our approach opens up the possibility of quantitative monitoring of volatile evolution as an avenue to explore polymer degradation kinetics and its dependence on time and temperature.

36 MATERIALS SCIENCE↗

Instability of flux flow and production of vortex-antivortex pairs by current-driven Josephson vortices in layered superconductors

We report numerical simulations of the nonlinear dynamics of Josephson vortices driven by strong dc currents in layered superconductors. Dynamic equations for interlayer phase differences in a stack of coupled superconducting layers were solved to calculate a drag coefficient η(J) of the vortex as a function of the perpendicular dc current density J. It is shown that Cherenkov radiation produced by a moving vortex causes significant radiation drag increasing η(v) at high vortex velocities v and striking instabilities of driven Josephson vortices moving faster than a terminal velocity v c . The steady-state flux flow breaks down at v > v c as the vortex starts producing a cascade of expanding vortex-antivortex pairs evolving into either planar macrovortex structures or branching flux patterns propagating both along and across the layers. This vortex-antivortex pair production triggered by a rapidly moving vortex is most pronounced in a stack of underdamped planar junctions where it can occur at J > J s well below the interlayer Josephson critical current density. Both v c and J s were calculated as functions of the quasiparticle damping parameter, and the dc magnetic field was applied parallel to the layers. The effects of vortex interaction on the Cherenkov instability of moving vortex chains and lattices in annular stacks of Josephson junctions were considered. It is shown that a vortex driven by a current density J > J s in a multilayer of finite length excites self-sustained large-amplitude standing waves of magnetic flux, resulting in temporal oscillations of the total magnetic moment. We evaluated a contribution of this effect to the power W radiated by the sample and showed that W increases strongly as the number of layers increases. Furthermore, these mechanisms can result in nonlinearity of the c-axis electromagnetic response and contribute to THz radiation from the layered cuprates at high dc current densities flowing perpendicular to the ab planes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Methods and apparatuses for making cathodes for high-temperature, rechargeable batteries

The approaches for fabricating cathodes can be adapted to improve control over cathode composition and to better accommodate batteries of any shape and their assembly. For example, a first solid having an alkali metal halide, a second solid having a transition metal, and a third solid having an alkali metal aluminum halide are combined into a mixture. The mixture can be heated in a vacuum to a temperature that is greater than or equal to the melting point of the third solid. When the third solid is substantially molten liquid, the mixture is compressed into a desired cathode shape and then cooled to solidify the mixture in the desired cathode shape.

25 ENERGY STORAGE↗

High temperature thermochemical energy storage materials

Disclosed are thermal energy storage systems and methods that utilize metal carbonate eutectics that can undergo high temperature reversible reactions to form mixtures of metal oxides. The metal oxides undergo an exothermic reaction with carbon dioxide to form the molten metal carbonate eutectics, and the molten metal carbonate eutectics undergo an endothermic decarbonization reaction to form the metal oxides and carbon dioxide. By carrying out the reversible reactions at a temperature above the melting point of the carbonate eutectic, the systems provide high thermal conductivity and reversible stability for thermal energy storage.

25 ENERGY STORAGE↗