Search NASA⌕ Search

SEARCH · Search NASA

Results for “Impact Melt”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Constraining the Structure under Lunar Impact Basins with Gravity

The lunar gravity field is used to estimate and constrain the depth of mass anomalies under 19 major lunar impact basins. We use radial gravitational spectra, consisting of accelerations computed either per spherical harmonic degree or cumulatively, at surface locations to obtain the distribution of the gravity signal with spherical harmonic degree and, by implication, to the likely depth below the surface. The results provide estimates for the maximum likely depths of the primary component to the mass anomalies under 19 basins. We find that the maximum depths of the primary source of mascon gravity on the lunar nearside are deeper than the depths for those on the farside when South Pole–Aitken (SPA) is excluded. All basin mass anomalies on the lunar nearside are in the mantle. The maximum depth of the primary source of the mass anomalies is 200 km beneath the surface. The upper 20 km under all basins is largely devoid of anomalies, reflecting predominantly mixing and relaxation associated with impact melt combined with ejecta fallback, as well as homogenization associated with post-basin formation impact bombardment. Except for SPA, all basin anomalies merge with the deep interior at ∼150 km or below, indicating the depth penetration of disruption of the density structure of the lunar interior associated with impact bombardment.

Lunar gravitational field↗
NASA NTRS1981

Asteroidal agglutinate formation and implications for asteroidal surfaces

The possible role of spallation on the free surfaces of target bodies in asteroid surface evolution in the presence of colliding bodies is considered. The ease of impact melt formation is discussed based on the results of shock recovery experiments, and a difference between collisions with dense, nonporous targets and with porous, particulate powders is demonstrated. It is shown that agglutinate-type glasses can be produced at impact velocities of 5 km/sec, but only in highly comminuted, porous targets and not in dense rocks. The apparent lack of agglutinate-type glasses on asteroid surfaces is explained in terms of coarse-grained asteroidal surfaces acting as dense, nonporous bedrock. It is argued that a possible mechanism inhibiting asteroidal surface comminution so as to inhibit melt formation and the effects of micrometeoroid impacts can be represented by collision processes with finite-sized targets rather than with a semi-infinite half-space as in the case of the moon, which give rise to spallation products rather than crater ejecta.

Horz, F.↗
NASA NTRS1993

Age determinations and Earth-based multispectral observations of lunar light plains

The history of light plains still remains doubtful, but there are good arguments - mainly obtained by age determinations and supported by multispectral observations - for an endogenic (magmatic) instead of an (exclusively) impact related origin. Light plains are characterized by smooth areas with an albedo lower than the surrounding highlands (12 - 13 percent), but significantly higher than maria (5 - 6 percent). Before Apollo 16 a volcanic source has been supposed, but analysis of returned samples (highly brecciated and metamorphosed rocks) favored an impact ejecta related origin. Among the currently discussed models are formation by ejecta sedimentation from multi-ringed basins, formation by secondary and tertiary cratering action of ballistically ejected material during the formation of multi-ringed basins, in situ formation by impact melt of large events, and premare (crypto-) volcanism basalts covered by a thin ejecta cover; younger impacts penetrated the ejecta surface to create the dark haloed craters. To find arguments in favor or against these ideas the chronology of light plains is of major importance. Obviously a genetic relationship between the evolution of light plains and the basin forming impacts can be possible only if the events of emplacement features happened simultaneously.

Koehler, U.↗
NASA NTRS1982

KREEP glass and the exotic provenance and formation of polymict breccia 66055

The Apollo 16 site polymict breccia 66055 contains abundant brown KREEP glass, as well as related brown glassy breccias having fluid forms. Most of the rock is composed of clasts of poikiloblastic breccia and mesostasis-rich impact melt which predate 66055's assembly, while the KREEP glass was created in the rock-producing impact. KREEP compositions are not common at the Apollo 16 site, leading to the speculation that 66055 originated in terrains to the west of the landing site. The presence of a granitic glass fragment that is embedded in the KREEP glass suggests that it is igneous, with a local volcanic origin which is more consistent with spatial relationships deduced from orbital geochemical data than with a basin ejecta deposit origin.

Ryder, G.↗
NASA NTRS2016

Secondary Crater-Initiated Debris Flow on the Moon

In recent work, radar circular polarization echo properties have been used to identify "secondary" craters without distinctive secondary morphologies. Because of the potential for this method to improve our knowledge of secondary crater population-in particular the effect of secondary populations on crater- derived ages based on small craters-it is important to understand the origin of radar polarization signatures associated with secondary impacts. In this paper, we utilize Lunar Reconnaissance Orbiter Camera photographs to examine the geomorphology of secondary craters with radar circular polarization ratio enhancements. Our investigation reveals evidence of dry debris flow with an impact melt component at such secondary craters. We hypothesize that these debris flows were initiated by the secondary impacts themselves, and that they have entrained blocky material ejected from the secondaries. By transporting this blocky material downrange, we propose that these debris flows (rather than solely ballistic emplacement) are responsible for the tail-like geometries of enhanced radar circular polarization ratio associated with the secondary craters investigated in this work. Evidence of debris flow was observed at both clustered and isolated secondary craters, suggesting that such flow may be a widespread occurrence, with important implications for the mixing of primary and local material in crater rays.

Martin-Wells, K. S.↗
NASA NTRS1989

Chemistry and petrology of Apollo 17 highland coarse fines - Plutonic and melt rocks

A suite of 21 fragments from the Apollo 17 coarse-fines consists of ferroan anorthosites, anorthositic gabbros, granulitic and regolith breccias, and impact melts. These samples belong to known petrographic and chemical groups. Three ferroan anorthosites were found, including one which appears to be the lowest in REE (La = 0.60X) and probably the purest of the Apollo 17 anorthosites identified thus far. The ferroan suite is a more important component at the Apollo 17 site than previously recognized. The Apollo 17 melt rocks are similar to other samples with LKFM and low-K KREEP compositions and show less diversity in trace elements (REE) than the Apollo 15 melt rocks. Apollo 17 melt rocks consist of aphanitic and poikilitic types that show some compositional variability with identical Ni/Ir, suggesting that either two distinct melt sheets formed by similar projectiles, or compositional heterogeneity within one melt sheet is possible.

Laul, J. C.↗
NASA NTRS1994

Observations of impact-induced molten metal-silicate partitioning

Observations of molten mid-ocean ridge basalt (MORB)-molybdenum (Mo) interactions produced by shock experiments provide insight into impact and differentiation processes involving metal-silicate partitioning. Analysis of fragments recovered from experiments (achieving MORB liquid shock pressures from 0.8 to 6 GPa) revealed significant changes in the composition of the MORB and Mo due to reaction of the silicate and metal liquids on a short time scale (less than 13 s). The FeO concentration of the shocked liquid decreases systematically with increasing pressure. In fact, the most highly shocked liquid (6 GPa) contains only 0.1 wt% FeO compared to an initial concentration of 9 wt% in the MORB. We infer from the presence of micrometer-sized Fe-, Si- and Mo-rich metallic spheres in the shocked glass that the Fe and Si oxides in the MORB were reduced in an estimated oxygen fugacity of 10(exp -17) bar and subsequently alloyed with the Mo. The in-situ reduction of FeO in the shocked molten basalt implies that shock-induced reduction of impact melt should be considered a viable mechanism for the formation of metallic phases. Similar metallic phases may form during impact accretion of planets and in impacted material found on the lunar surface and near terrestrial impact craters. In particular, the minute, isolated Fe particles found in lunar soils may have formed by such a process. Furthermore, the metallic spheres within the shocked glass have a globular texture similar to the textures of metallic spheroids from lunar samples and the estimated, slow cooling rate of less than or equal to 140 C/s for our spheres is consistent with the interpretation that the lunar spheroids formed by slow cooling within a melted target.

Rowan, Linda R.↗
NASA NTRS2024

Evidence for a ~1 Ga Hypervelocity Impact Event Found in Northwest Greenland

There are likely many undiscovered impact structures on Earth, but several challenges prevent their detection, including possible concealment beneath large ice sheets. In recent years, geophysical, geochemical, and microphysical evidence has mounted for a ca. 58 Ma impact structure under the Hiawatha Glacier, northwest Greenland. Here, we report evidence for a second, much older hypervelocity impact event in this region, recorded in an impact melt rock sample collected from a glaciofluvial deposit in Inglefield Land. Secondary ion mass spectrometry U-Pb analyses of shock metamorphosed zircon grains yielded a previously unrecorded, Proterozoic best estimate impact age of 1039 ± 16 Ma (mean square of weighted deviates = 2.9). Based on Archean−Proterozoic target rock U-Pb ages obtained from unshocked zircon grains and the location of the melt rock sample along the ice margin, we suggest this sample was derived from a hypervelocity impact structure farther inland, concealed by the Greenland Ice Sheet. This study demonstrates the ability to uncover new impact events in some of the most inaccessible areas on Earth and the possibility of sampling multiple impact structures from one location when examining ex situ material. Our results have implications for current and future Martian and lunar returned samples that demonstrably bear complex impact histories.

William R. Hyde↗
NASA NTRS2013

A Moderate D/H Ratio for a Surficial Water Reservoir on Mars

Martian surface morphology implies that Mars was once warm enough to maintain persistent liquid water on its surface and that water played a significant role in the formation of weathered/altered terrains [e.g., 1, 2, 3]. Volatiles exhaled by volcanic activity would have been the dominant greenhouse gases and would have significantly affected the Martian climate. The enrichment of some volatile elements in the atmosphere, which would have dissolved in surface water, could also have influenced water chemistry (e.g., acidity) and played a significant role in weathering and aqueous alteration processes. While much of this picture is qualitative, Martian meteorites contain records of major Martian volatile reservoirs. This study characterizes Martian surficial volatile reservoirs based on in situ ion microprobe analyses of volatile abundances and H-isotopes of glassy phases (groundmass glass [GG] and impact melt [IM]) in Martian basalts (shergottites). Although these meteorites are of igneous origin, some glassy phases underwent impact-induced modification that trapped surficial and atmospheric volatile components [4, 5]; e.g., inert gases contained in IMs from EETA79001 (EETA79) match the relative abundances of modern Martian atmosphere [6]. Analyses of these glassy phases demonstrate that surficial volatile reservoirs have distinct D/H ratios from their magmatic volatiles.

Usui, Tomohiro↗
NASA NTRS1982

Chemical systematics among the moldavite tektites

The compositional variations that occur among the moldavite tektites are caused principally by incomplete mixing of two components during fusion. With the possible exception of silica, there is no evidence for significant losses of volatile species by fractional vaporization. Chemical constraints have been calculated for the two source-materials that contributed to the moldavites. If these tektites were formed by impact fusion, as is commonly believed, then the compositional systematics preserved within the moldavites suggest that hypersonic flow and ejection of impact melts are orderly processes. Insights gained from the study of tektites should prove useful in interpreting the chemistries of impact glasses from other bodies in the solar system.

Delano, J. W.↗
NASA NTRS2015

Revisiting the West Clearwater Lake Impact Structure, Canada

The West and East Clearwater Lake impact structures are two of the most distinctive and recognizable impact structures on Earth. Known regionally as the "Clearwater Lake Complex", these structures are located in northern Quebec, Canada (56 deg 10 N, 74 deg 20 W) approximately 125 km east of Hudson Bay. The currently accepted diameters are 36 km and 26 km for the West and East structures, respectively. Long thought to represent a rare example of a double impact, recent age dating has called this into question with ages of approximately 286 Ma and approximately 460-470 Ma being proposed for the West and East structures, respectively. Relatively little is known about the East Clearwater Lake structure. There is no surface exposure and what information there is comes from geophysics and two drill cores obtained in the 1960s. In contrast, the West Clearwater Lake structure is relatively well preserved with large ring of islands in the approximately 30 km diameter lake. Much of the work done on West Clearwater stems from field investigations carried out in 1977 driven by the Apollo program, with a focus on the impact melt rocks and other impactites, which are well exposed on the ring of islands. To our knowledge, the Clearwater Lake impact structures have not been the focus of detailed impact geology field investigations since the 1977 expedition and the only geological map that exists is from the 1960s and is at the reconnaissance level. Our knowledge of impact cratering processes have increased substantially since this time, as have the analytical techniques available for samples. This provided the motivation for a joint Canadian-US-UK expedition to the West Clearwater Lake impact structure in August and September 2015, under the auspices of the FINESSE (Field Investigations to Enable Solar System Science and Exploration) project, part of NASA's Solar System Exploration Research Virtual Institute (SSERVI). We focus here on the impactites of the West Clearwater Lake impact structure. Other ongoing studies, also presented at this conference, focus on central uplift formation, the impact-generated hydrothermal system, xxxx and using WCIS as an analog test site for crew studies of sampling protocols].

West Clearwater Lake↗
NASA NTRS1986

An experimental investigation of agglutinate melting mechanisms - Shocked mixtures of Apollo 11 and 16 soils

Mixtures of chemically contrasting lunar soils have been shocked at pressures ranging from 18.2-62.0 GPa. Other than the generation of impact melts, modal and textural changes caused by shock include destruction of pore space and fused soil clasts and conversion of plagioclase to maskelynite. The loss of the fused soil component in these runs indicates that low agglutinate contents in shocked and/or compacted regolith breccias cannot be considered by themselves to be evidence of formation from immature regolith. From the petrographic and chemical data it appears that the impact glass formed mainly from the fine fraction and the fused soil component in the target, with relatively minor contributions from the other coarse clasts. The impact glasses exhibit the same chemical enrichments and depletions as their corresponding fine fractions and plot on or near a mixing line between the bulk and fine fraction of the soil in which they were formed. From this as well as several other studies it appears that the fusion of the finest fraction model is valid and that it accurately predicts the chemical systematics of impact glass formed from lunar soil. In addition, fusion of agglutinates present in the target soil is an important process.

Simon, S. B.↗
NASA NTRS2001

Exploration of the Eltanin Impact Area (Bellingshausen Sea): Expedition ANT XVIII5a

The impact of the Eltanin asteroid into the Bellingshausen Sea (2.15 Ma) is the only known impact in a deep-ocean (approx. 5 km) basin. On 26 March 2001, the FS Polarstern returned to the impact area during expedition ANT XVIII/5a. Over a period of 14 days, this region was explored by detailed bathymetric mapping, acoustic profiling of sediment deposits, and direct sampling with 18 piston cores and four gravity cores. Preliminary shipboard examination of microfossils showed that sixteen of the piston cores and three gravity cores contained sediments at least as old as the impact event and have a high probability of containing a record of the disturbances caused by the impact. During the expedition, portions of eleven piston cores were opened for preliminary examination of the impact deposits. Visual examination of cores and microscopic identification of suspect impact melt particles were were used to identify ejecta and X-ray radiographs of the opened core segments permitted analysis of sediment structures. Impact deposits were found in nine of the eleven opened cores, and a similar success rate is anticipated in the seven cores remaining to be opened. These preliminary observations indicate that the highest concentrations of meteoritic ejecta and the largest particle sizes appear to occur in the region north of the San Martin seamounts. Recovered debris includes cm-sized melt rocks and a 2.5 cm meteorite. This expedition has confirmed the presence of high concentrations of meteoritic ejecta across a region at least as large as 10(exp 5) sq km. Quantitative analyses of ejecta distribution within this region will require further study, but previous estimates of 1 km for the minimum diameter of the Eltanin asteroid, appear safe.

Gersonde, Rainer↗
NASA NTRS1992

Geological evidence for a 2.6-Ga strewn field of impact spherules in the Hamersley Basin of Western Australia

Sand-sized spherules up to 1.7 mm across with spherulitic, vesicular, and other crystalline textures that consist mainly of K-feldspar help define a unique horizon in the well-preserved 2.6-Ga Wittenoom Formation in the Hamersley Basin of Western Australia. This layer is informally known as the spherule marker bed. In the northeastern part of the Hamersley Basin, similar spherules again occur at only one horizon, but here they are a minor constituent of a dolomitic debris-flow deposit known as the dolomixtite layer. The dolomixtite layer occurs in the Carawine Dolomite, which is stratigraphically equivalent to the Wittenoom Formation. Moreover, paleocurrent data from closely associated carbonate and volcaniclastic turbidites indicate the spherule marker bed was deposited in deeper-water paleoenvironments than the dolomixtite layer. Therefore, the dolomixtite layer is believed to be a proximal equivalent of the spherule marker bed. The layers that host the spherules are interpreted to be the deposits of a major sediment gravity flow that exhumed and redeposited most of the spherules after shallow burial, although the flow is not believed to have been a direct result of the proposed impact. The most likely site for the proposed impact would have been in the early Precambrian ocean close to the northeastern edge of the Pilbara Craton. Another thin horizon in the overlying Brockman Iron Formation contains spherules that again consist largely of K-feldspar and have internal textures strikingly similar to those of the Wittenoom Formation and Carawine Dolomite. The close resemblance of these spherules to those of the Wittenoom Formation and Carawine Dolomite suggests they also originated as impact melt droplets, even though they are admixed with volcaniclastic detritus. The stratigraphic separation between the two suggests that a second major impact occurred near the Hamersley Basin after a time interval of about 75 m.y. elapsed. This suggests the record of impacts in early Precambrian strata is richer than is generally appreciated.

Simonson, Bruce M.↗
NASA NTRS1997

Some things we can infer about the Moon from the Composition of the Apollo 16 Regolith

Characteristics of the regolith of Cayley plains as sampled at the Apollo 16 lunar landing site are reviewed and new compositional data are presented for samples of less than 1 mm fines ('soils') and 1-2 mm regolith particles. As a means of determining which of the many primary (igneous) and secondary (crystalline breccias) lithologic components that have been identified in the soil are volumetrically important and providing an estimate of their relative abundances, more than 3 x 10(exp 6) combinations of components representing nearly every lithology that has been observed in the Apollo 16 regolith were systematically tested to determine which combinations best account for the composition of the soils. Conclusions drawn from the modeling include the following. At the site, mature soil from the Cayley plains consists of 64.5% +/- 2.7% components representing 'prebasin' materials: anorthosites, feldspathic breccias, and a small amount (2.6% +/- 1.5% of total soil) of nonmare, mafic plutonic rocks, mostly gabbronorites. On average, these components are highly feldspathic, with average concentrations of 3l-32% Al2O3 and 2-3% FeO and a molar Mg/(Mg+Fe) ratio of O.68. The remaining 36% of the regolith is syn- and postbasin material: 28.8% +/- 2.4% mafic impact-melt breccias (MIMBS, i.e., 'LKFM' and 'VHA basalts') created at the time of basin formation, 6.0% +/- 1.4% mare-derived material (impact and volcanic glass, crystalline basalt) with an average TiO2 concentration of 2.4%, and 1% postbasin meteoritic material. The MIMBs are the principal (80-90%) carrier of incompatible trace elements (rare earths, Th, etc.) and the carrier of about one-half of the siderophile elements and elements associated with mafic mineral phases (Fe, Mg, Mn, Cr, Sc). Most (71 %) of the Fe in the present regolith derives from syn- and postbasin sources (MIMBS, mare-derived material, and meteorites). Thus, although the bulk composition of the Apollo 16 regolith is nominally that of noritic anorthosite, the noritic part (the MIMBs) and anorthositic parts (the prebasin components) are largely unrelated.

Korotev, Randy L.↗
NASA NTRS2009

Sulfur Speciation in the Martian Regolith Component in Shergottite Glasses

We have shown that Gas-Rich Impact-Melt (GRIM) glasses in Shergotty, Zagami, and EET79001 (Lith A and Lith B) contain Martian regolith components that were molten during impact and quenched into glasses in voids of host rock materials based on neutron-capture isotopes, i.e., Sm-150 excesses and Sm-149 deficits in Sm, and Kr-80 excesses produced from Br [1, 2]. These GRIM glasses are rich in S-bearing secondary minerals [3.4]. Evidence for the occurrence of CaSO4 and S-rich aluminosilicates in these glasses is provided by CaO-SO3 and Al2O3-SO3 correlations, which are consistent with the finding of gypsum laths protruding from the molten glass in EET79001 (Lith A) [5]. However, in the case of GRIM glasses from EET79001 (Lith B), Shergotty and Zagami, we find a different set of secondary minerals that show a FeO-SO3 correlation (but no MgOSO3 correlation), instead of CaO-SO3 and Al2O3-SO3 correlations observed in Lith A. These results might indicate different fluidrock interactions near the shergottite source region on Mars. The speciation of sulfur in these salt assemblages was earlier studied by us using XANES techniques [6], where we found that Lith B predominantly contains Fe-sulfide globules (with some sulfate). On the other hand, Lith A showed predominantly Casulfite/ sulfate with some FeS. Furthermore, we found Fe to be present as Fe2+ indicating little oxidation, if any, in these glasses. To examine the sulfide-sulfate association in these glasses, we studied their Fe/Ni ratios with a view to find diagnostic clues for the source fluid. The Fe-sulfide mineral (Fe(0.93)Ni(0.3)S) in EET79001, Lith A is pyrrhotite [7, 8]. It yields an Fe/Ni ratio of 31. In Shergotty, pyrrhotite occurs with a molar ratio of Fe:S of 0.94 and a Ni abundance of 0.12% yielding a Fe/Ni ratio of approx.500 [8]. In this study, we determined a NiO content of approx.0.1% and FeO/NiO ratio of approx.420 in S-rich globules in #507 (EET79001, Lith B) sample using FE-SEM. In the same sample (bulk), using EMPA, we determined a FeO/NiO ratio of approx.700 (raster mode). Using similar techniques, we determined a NiO content of approx.0.015% and a FeO/NiO ratio of approx.800 in #506 (EET79001, Lith A). Moreover, a NiO content of approx.150 ppm and 6.1% FeO were found in Lith A GRIM glasses using neutron activation analysis [9] yielding a FeO/NiO ratio of approx.420. The FeO/NiO ratios in secondary mineral phases in S-rich pockets of EET79001 (Lith A/B) and Shergotty are high (approx.400) compared to the FeO/NiO ratio of 31 in Lith A pyrrhotite. These results suggest similar kind of fluids interacted with different rock materials to yield the observed variations in GRIM glasses in EET79001 Lith A and B.

Rao, M. N.↗
NASA NTRS1978

Petrogenesis of melt rocks, Manicouagan impact structure, Quebec

It is suggested, on the basis of previous theoretical studies of shock waves, that the Manicouagan melt formed in 1 or 2 s in a 5-km-radius hemisphere near the point of impact. The melt and the less shocked debris surrounding it flowed downward and outward for a few minutes until the melt formed a lining of a 5- to 8-km deep, 15- to 22-km-radius cavity. Extremely turbulent flow thoroughly homogenized the melt and promoted the incorporation and progressive digestion of debris that had been finely fragmented (but not melted) to grain sizes of less than one mm by the passage of the shock waves. The equilibration of clasts and melt, plagioclase nucleation, and readjustment of the crater floor are discussed.

Simonds, C. H.↗
NASA NTRS1987

Tektite-like bodies at Lonar Crater, India - Implications for the origin of tektites

Homogeneous dense glass bodies (both irregular and splash form) with high silica contents (about 67 pct SiO2) occur in the vicinity of Lonar Crater, India. Their lack of microlites and mineral remnants and their uniform chemical composition virtually preclude a volcanic origin. They are similar to tektites reported in the literature. While such a close association of tektite-like bodies with impact craters is already known (Aouelloul Crater, Mauritania; Zhamanshin Crater, U.S.S.R.), the tektite-like bodies at Lonar Crater are unique in that they occur in an essentially basaltic terrain. Present geochemical data are consistent with these high silica glass bodies being impact melt products of two-thirds basalt and one-third local intertrappean sediment (chert). The tektite-like bodies of the impact craters Lonar, Zhamanshin, and Aouelloul are generally similar. Strong terrestrial geochemical signatures reflect the target rock REE patterns and abundance ratios and demonstrate their terrestrial origin resulting from meteorite impact, as has been suggested by earlier workers.

Murali, A. V.↗