Search NASA⌕ Search

SEARCH · Search NASA

Results for “Inorganic Crystallization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Crystal and Electronic Structures of A 2 NaIO 6 Periodate Double Perovskites (A = Sr, Ca, Ba): Candidate Wasteforms for I-129 Immobilization

The synthesis, structure, and thermal stability of the periodate double perovskites A 2 NaIO 6 (A= Ba, Sr, Ca) were investigated in the context of potential application for the immobilization of radioiodine. A combination of X-ray diffraction and neutron diffraction, Raman spectroscopy, and DFT simulations were applied to determine accurate crystal structures of these compounds and understand their relative stability. The compounds were found to exhibit rock-salt ordering of Na and I on the perovskite B-site; Ba 2 NaIO 6 was found to adopt the Fm- 3 m aristotype structure, whereas Sr 2 NaIO 6 and Ca 2 NaIO 6 adopt the P 2 1 / n hettotype structure, characterized by cooperative octahedral tilting. DFT simulations determined the Fm- 3 m and P 2 1 / n structures of Ba 2 NaIO 6 to be energetically degenerate at room temperature, whereas diffraction and spectroscopy data evidence only the presence of the Fm- 3 m phase at room temperature, which may imply an incipient phase transition for this compound. The periodate double perovskites were found to exhibit remarkable thermal stability, with Ba 2 NaIO 6 only decomposing above 1050 °C in air, which is apparently the highest recorded decomposition temperature so far recorded for any iodine bearing compound. As such, these compounds offer some potential for application in the immobilization of iodine-129, from nuclear fuel reprocessing, with an iodine incorporation rate of 25–40 wt%. The synthesis of these compounds, elaborated here, is also compatible with both current conventional and future advanced processes for iodine recovery from the dissolver off-gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Spin–Flop and Metamagnetic Transition in Monoclinic Eu 4 Bi 6 Se 13

This study explores an investigation of the crystallographic, electronic, and magnetic properties of the europium-based bismuth selenide compound Eu 4 Bi 6 Se 13 , with particular focus on its magnetic anisotropy. This compound adopts a monoclinic crystal structure classified under the P2 1 /m space group (#11). It exhibits distinctive structural features, including substantial Eu–Se coordination numbers (6 and 8), Bi–Se ladders, and linear chains of Eu atoms that propagate along the b-axis. Electronic resistivity assessments indicate that Eu 4 Bi 6 Se 13 exhibits metallic behavior. As the magnetic field is oriented along the b-axis, magnetic characterization reveals uniaxial magnetic anisotropy, with metamagnetic transitions appearing at approximately 12 kOe and a lower field. In the field below 10 kOe, the spin-flop transition is observed with possible domain-induced hysteresis. This behavior supports the identification of metamagnetic features in field-dependent measurements attributable to the europium spins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ironing out the transition metal contribution to the magnetism of the n = 3 members of the homologous series Pr n +1 M n Ge 3 n +1 (M = Fe, Co): Pr 4 Fe 3 Ge 10 vs. Pr 4 Co 3 Ge 10

The Ln n+1 M n X 3n+1 (Ln = lanthanide, M = transition metal, and X = tetrel) homologous series provides a platform to study collective phenomena in quantum materials. Here, in this work, we compare the crystal growth, structure, and magnetic properties of the n = 3 members of the Pr n+1 M n Ge 3n+1 (M = Fe, Co) analogues, Pr 4 Fe 3 Ge 10 (a = 4.3207 (10) Å, b = 35.523 (8) Å, c = 4.2982 (15) Å, and V = 659.7 (3) Å 3 ) and Pr 4 Co 3 Ge 10 (a = 4.3091 (12) Å, b = 35.750 (9) Å, c = 4.2807 (11) Å, and V = 659.4 (3) Å 3 ). We determined that the ideal flux growth conditions for each compound are highly dependent on the concentration of Sn flux and quench temperature. Pr 4 Fe 3 Ge 10 orders ferromagnetically at 10 K along the c-direction while Pr 4 Co 3 Ge 10 orders antiferromagnetically at 16 K along the b-direction. For both compounds, we observed a magnetic moment higher than that expected for only Pr 3+ ions (3.58 µ B /Pr), implying that the transition metal ions contribute to magnetic ordering (3.91, 3.48, and 3.69 µ B /Pr for Pr 4 Fe 3 Ge 10 , and 3.76, 4.04, and 3.83 µ B /Pr for Pr 4 Co 3 Ge 10 measured along the a-, b-, and c-directions, respectively). Moreover, the zero-field Mössbauer spectrum obtained at 4.2 K for Pr 4 Fe 3 Ge 10 demonstrates that the iron sites participate in magnetic ordering.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Interplay between Mixed and Pure Exciton States Controls Singlet Fission in Rubrene Single Crystals

Singlet fission (SF) is a multielectron process in which one singlet exciton S converts into a pair of separated triplet excitons T. SF is widely studied as it may help overcome the Shockley−Queisser efficiency limit for semiconductor photovoltaic cells. To elucidate and control the SF mechanism, great attention has been given to the identification of intermediate states in SF materials, which often appear elusive due to the complexity and fast time scales of the SF process. Here, we apply 14 fs-1 ms transient absorption techniques to high-purity rubrene single crystals to disentangle the intrinsic fission dynamics from the effects of defects and grain boundaries and to identify reliably the fission intermediates. Our data demonstrates that above-gap excitation directly generates a hybrid vibronically assisted mixture of singlet state and triplet-pair multiexciton [S/TT], which rapidly (<100 fs) and coherently branches into pure singlet or triplet excitations. The relaxation of [S/TT] to S is followed by a relatively slow and temperature-activated (48 meV activation energy) incoherent fission process. The SF competing pathways and intermediates revealed here unify the observations and models presented in previous studies of SF in rubrene and offer alternative strategies for the development of SF-enhanced photovoltaic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Improvement of Oxygen Reduction Performance in Alkaline Media by Tuning Phase Structure of Pd–Bi Nanocatalysts

Tuning the crystal phase of bimetallic nanocrystals offers an alternative avenue to improving their electrocatalytic performance. Herein, we present a facile and one-pot synthesis approach that is used to enhance the catalytic activity and stability toward oxygen reduction reaction (ORR) in alkaline media via control of the crystal structure of Pd-Bi nanocrystals. By merely altering the types of Pd precursors under the same conditions, the monoclinic structured Pd 5 Bi 2 and conventional face-centered cubic (fcc) structured Pd 3 Bi nanocrystals with comparable size and morphology can be precisely synthesized, respectively. Interestingly, the carbon-supported monoclinic Pd 5 Bi 2 nanocrystals exhibit superior ORR activity in alkaline media, delivering a mass activity (MA) as high as 2.05 A/mg Pd . After 10,000 cycles of ORR durability test, the monoclinic structured Pd 5 Bi 2 /C nanocatalysts still remain a MA of 1.52 A/mg Pd , which is 3.6 times, 16.9 times, and 21.7 times as high as those of the fcc Pd 3 Bi/C counterpart, commercial Pd/C, and Pt/C electrocatalysts, respectively. Moreover, structural characterizations of the monoclinic Pd 5 Bi 2 /C nanocrystals after the durability test demonstrate the excellent retention of the original size, morphology, composition, and crystal phase, greatly alleviating the leaching of the Bi component. Overall, this work provides new insight for the synthesis of multimetallic catalysts with a metastable phase and demonstrates phase-dependent catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Chemical Compensation Challenges in Processing Antiferroelectric PbZrO 3 Thin Films

The electric field-induced antipolar-to-polar phase transition in antiferroelectric materials is accompanied by large changes in the structural and functional response, making them attractive for many applications ranging from pulsed energy capacitors to high-strain-high (blocking-)force actuators, solid-state heating and cooling systems, and optoelectronic devices. PbZrO 3 , as an end member of the PZT, (x)PbZr 1–x Ti x O 3 , solid solution, has been the subject of many studies. However, processing of perovskite PbZrO 3 is extremely challenging due to phase instabilities induced by Pb loss at the temperatures necessary for perovskite crystallization. Here, we discuss the challenges associated with Pb loss, as well as its compensation through bulk Pb overstoichiometry and interfacial PbO additions, in chemical solution processed, highly oriented PbZrO 3 thin films. For both 042 o - and 001 o -oriented (o-orthorhombic distortion) PbZrO 3 thin films, the crystallization interfaces are the most important contributors to Pb loss and off-stoichiometric outcomes, and no single approach was sufficient to address these challenges. Pb-rich and Pb-deficient nonperovskite phases including ZrO x were only observable through microscopic characterization, and X-ray diffraction alone could not rule out the presence of such secondary phases. “Ideal” macroscopic antiferroelectric polarization-electric field double hysteresis curves were observed despite (at times) the large presence of secondary phases. However, reduced saturation polarization and increased phase transition electric fields were observed concomitantly with the presence of secondary phase(s) and tentatively assigned to the voltage drop across the ZrO x nanocrystals. Based on these results, it is imperative that the presence of secondary phases always be addressed (beyond X-ray diffraction spectra) in order to correctly evaluate the properties of antiferroelectric films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Tunable Magnetic Exchange between Rare-Earth Metal 5d and Iron 3d States: A Case Study of the Multiple Magnetic Transitions in Gd 6 FeBi 2 and the Solid Solutions Dy 6– x Gd x FeBi 2 (1 ≤ x ≤ 5) with Curie Temperatures in the Range 120–350 K

In this paper, the room-temperature magnet Gd 6 FeBi 2 was comprehensively characterized by means of temperature-dependent single-crystal X-ray diffraction, magnetization measurements, and experimental electron density and electronic structure computations. This work explores the electron-spin effects of Fe on this structure and suggests that Gd6FeBi2 shows structural features and exchange interactions, which are clearly distinguishable from other analogues, including the solid solutions Dy 6–x Gd x FeBi 2 (0 ≤ x ≤ 5). The unique traits of Gd 6 FeBi 2 and its derivatives encompass abnormal variations of lattice parameters with the temperature, as well as the presence of multiple magnetic transitions of complex nature. Based on the comprehensive analyses, it can be suggested that the unique magnetic response in this material is the result from tunable Fe spin states, which are coupled with strong Gd 5d–Fe 3d interactions, which differ from other members of this large, structural family. In the ground state, according to density functional theory calculations, the Fe atom carries two net electrons, whose spins are coupled in an antiparallel fashion to the spins of the Gd electrons. Near the Curie temperature, the Fe net moment is reduced intermittently, coupled with a multiple of magnetic transitions. The magnetic correlations are manifested in unexpected variations of the lattice parameters as a function of temperature, suggesting spin–lattice interactions. Furthermore, this study emphasizes the important role of Gd 5d electrons in tuning Fe 3d-based magnetic contribution, which enables better understanding on the spin coupling in other related compounds and sheds light on the development of new magnetic and spintronic compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Synthesis and structural characterization of the new Zintl phases Ba 3 Cd 2 P 4 and Ba 2 Cd 2 P 3 . Rare example of small gap semiconducting behavior with negative thermopower within the range 300 K-700 K

The new Zintl phases Ba 3 Cd 2 P 4 and Ba 2 Cd 2 P 3 have been synthesized using Pb flux, which allowed for the growth of 4-5 mm large crystals. The structures were determined utilizing single-crystal X-ray diffraction methods. Both compounds crystalize in the monoclinic crystal system (space group C2/m (No. 12)) and their structures are closely related. The structure of Ba 3 Cd 2 P 4 can be seen as being comprised of divalent Ba atoms and conjoined CdP 4 tetrahedra in the form of [Cd 2 P 4 ] 6- layers. Within the layers, homoatomic P–P bonds are present, which if cleaved, leave two infinite [CdP 3 ] 7- chains running along the crystallographic b-axis. The other structure, that of Ba 2 Cd 2 P 3 , can be rationalized as also having divalent Ba atoms and conjoined CdP4 tetrahedra in the form of [Cd 2 P 3 ] 6- layers. These layers, again, can be visualized as chains that run down the crystallographic b-axis, which are further connected by P-P dimers. Electronic band structure calculations show that each structure has an optimal number of valence electrons, and therefore conform to the Zintl-Klemm concept. Accordingly, the two compounds can be considered small band gap semiconductors, with band gaps of ca. 0.1 eV and 0.6 eV for Ba3Cd2P4 and Ba 2 Cd 2 P 3 , respectively. Electrical resistivity measurements show that Ba3Cd2P4 displays a large resistivity value at room temperature and an experimental band gap of ca. 0.05 eV, which fits reasonably well with the theoretical predictions. Thermopower measurements show that throughout the temperature range 300 K-700 K, Ba 3 Cd 2 P 4 displays a negative Seebeck coefficient. Here, the extremum value of -84 μV is reached at 630 K, suggestive of an n-type semiconductor, a rarity among Zintl phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structure and Magnetic Properties of Homoleptic Trivalent Tris(alkyl)lanthanides

Six new solvent-free, homoleptic paramagnetic tris(alkyl)lanthanides Ln{C(SiHMe 2 ) 3 } 3 (1Ln) and Ln{C(SiHMe 2 ) 2 Ph} 3 (2Ln) (Ln = Gd, Dy, and Er) were synthesized to investigate the magnetic properties of 4f organometallic compounds stabilized by secondary Ln←H–Si and benzylic interactions. The unit cell of 1Gd contains one independent molecule (Z = 2), while 1Dy and 1Er crystallize with four independent isostructural molecules per unit cell (Z = 16). In all molecules, as in other 1Ln compounds, the three tris(dimethylsilyl)methyl ligands form a trigonal planar LnC 3 core, and six secondary interactions involving Ln←H–Si bonding in Ln{C(SiHMe 2 ) 3 } 3 form above and below the equatorial plane. Two and five crystallographically independent molecules of each 2Ln (2Gd, Z = 8; 2Dy, Z = 20) form with three π-coordinated phenyl groups in addition to either one or two secondary Ln←H–Si interactions per molecule. The packing of these midseries organolanthanide compounds contrasts the single crystallographically unique molecules in previously reported La{C(SiHMe 2 ) 3 } 3 (1La, Z = 2, Z' = 1) and La{C(SiHMe 2 ) 2 Ph} 3 (2La, Z = 2, Z' = 1/3). 2La doped with 2Dy can adopt the crystallographic structure of 2La, which promotes magnetic properties, namely a higher χ m T value at low temperatures as well as stronger magnetic anisotropy. The ac susceptibility data for 10% 2Dy doped into 2La suggests slow relaxation at low temperatures with a relaxation barrier of ~45 K. The computed saturated magnetization of 1Er (M ≈ 4.5 μ B ) and 1Dy (M ≈ 6 μ B ) matches the experimental values, while the computed value for 2Dy better matches the value measured for 2Dy diluted in 2La (M ≈ 5 μ B ). Gas-phase calculations predict that the ground-state and first excited-state multiplet separations are larger for 1Er than 2Er, while the ordering for dysprosium is 1Dy > 2Dy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

From Layered Antiferromagnet to 3D Ferromagnet: LiMnBi-to-MnBi Magneto-Structural Transformation

Here, the intermetallic compound LiMnBi was synthesized by the two-step solid-state reaction from the elements. The synthesis temperature of 850 K was selected based on in-situ high-temperature powder X-ray diffraction data. LiMnBi crystalizes in the layered-like PbClF structure type (a = 4.3131(7) Å, c = 7.096(1) Å at 100 K, P4/nmm space group, Z = 2). LiMnBi structure is built of the alternating [MnBi] and Li layers, as determined from single-crystal X-ray diffraction data. Magnetic properties measurements and solid-state 7 Li Nuclear Magnetic Resonance data collected for polycrystalline LiMnBi samples indicate the long-range antiferromagnetic ordering of Mn sublattice at ~340 K, with no superconductivity down to 5 K detected. LiMnBi is air- and water-sensitive. In aerobic conditions, Li can be extracted from LiMnBi structure to form Li 2 O/LiOH and MnBi (NiAs structure type, P6 3 /mmc). The obtained MnBi polymorph was previously reported to be one of the strongest rare-earth-free ferromagnets, yet its bulk synthesis in powder form is cumbersome. The proposed magneto-structural transformation from ternary LiMnBi to ferromagnetic MnBi involves condensation of the MnBi4 tetrahedra upon Li deintercalation and is exclusive to LiMnBi. In contrast, ferromagnetic MnBi cannot be obtained from either isostructural NaMnBi and KMnBi, or from the structurally related CaMn 2 Bi 2 . Such a distinctive transformation in the case of LiMnBi is presumed to be due to its fitting reactivity to yield MnBi and favorable interlayer distance between [MnBi] layers, while the interlayer distance in NaMnBi and KMnBi structural analogs is unfavorably long. The studies of delithiation from the layered-like LiMnBi under different chemical environments indicate that the yield of the MnBi depends on the type of solvent used and the kinetics of the reaction. A slow rate and mild reaction media lead to a high fraction of the MnBi product. The saturation magnetization of the “as-prepared” MnBi is ~50 % of the expected value of 81.3 emu/g. Overall, this study adds a missing member to the family of ternary pnictides and illustrates how soft-chemistry methods can be used to obtain “difficult-to-synthesize” compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Magnetism in Mixed Valence, Defect, Cubic Perovskites: BaIn 1– x Fe x O 2.5+δ , x = 0.25, 0.50, and 0.75. Local and Average Structures

The series BaIn 1–x Fe x O 2.5+δ , x = 0.25, 0.50, and 0.75, has been prepared under air-fired and argon-fired conditions and studied using X-ray diffraction, d.c. and a.c. susceptibility, Mössbauer spectroscopy, neutron diffraction, X-ray near edge absorption spectroscopy (XANES), and X-ray pair distribution (PDF) methods. While Ba 2 In 2 O 5 (BaInO 2.5 ) crystallizes in an ordered brownmillerite structure, Ibm2, and Ba 2 Fe 2 O 5 (BaFeO 2.5 ) crystallizes in a complex monoclinic structure, P2 1 /c, showing seven Fe 3+ sites with tetrahedral, square planar, and octahedral environments, all phases studied here crystallize in the cubic perovskite structure, Pm$\bar{}3}$m, with long-range disorder on the small cation and oxygen sites. 57 Fe Mössbauer studies indicate a mixed valency, Fe 4+ /Fe 3+ , for both the air-fired and argon-fired samples. The increased Fe 3+ content for the argon-fired samples is reflected in increased cubic cell constants and in the increased Mössbauer fraction. It appears that the Pm$\bar{}3}$m phases are only metastable when fired in argon. From a slightly modified percolation theory for a primitive cubic lattice (taking into account the presence of random O atom vacancies), long-range spin order is permitted for the x = 0.50 and 0.75 phases. Instead, the d.c. susceptibility shows only zero-field-cooled (ZFC) and field-cooled (FC) divergences at ~6 K [5 K] for x = 0.50 and at ~22 K [21 K] for x = 0.75, with values for the argon-fired samples in [ ]. Neutron diffraction data for the air-fired samples confirm the absence of long-range magnetic order at any studied temperature. For the air-fired x = 0.50, a.c. susceptibility data show a frequency-dependent χ'(max) and spin glass behavior, while for x = 0.75, χ'(max) is invariant with frequency, ruling out either a spin glass or a superparamagnetic ground state. These behaviors are discussed in terms of competing Fe 3+ –Fe 3+ antiferromagnetic exchange and ferromagnetic Fe 3+ –Fe 4+ exchange. The PDF and 57 Fe Mössbauer data indicate a local structure at short interatomic distances, which deviates strongly from the average Pm$\bar{}3}$m model. Fe Mössbauer, PDF, and XANES data show a systematic dependence on x and indicate that the Fe 3+ sites are largely fourfold-coordinated and Fe 4+ sites are fivefold- or sixfold-coordinated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Tuning the Radius Ratio to Enhance Thermoelectric Properties in the Zintl Compounds AM 2 Sb 2 (A = Ba, Sr; M = Zn, Cd)

Five novel Zintl phase solid solutions in the Ba 1–x Sr x Zn 2–y Cd y Sb 2 (0 ≤ x ≤ 0.13(1); 0 ≤ y ≤ 0.32(2)) system were successfully synthesized by the molten Pb metal-flux method, and the powder X-ray diffraction and single-crystal X-ray diffraction analyses proved that all five title compounds adopted the BaCu 2 S 2 -type phase having the orthorhombic Pnma space group (Z = 4, Pearson code oP20) with five crystallographically independent atomic sites. The previously studied BaCu 2 S 2 -type antimonides demonstrated a limited tolerance for doping in contrast to the CaAl 2 Si 2 -type antimonides. To understand the relatively narrower phase width and limited dopability of the title BaCu 2 S 2 -type phase than the CaAl 2 Si 2 -type phase in the overall Ba 1–x Sr x Zn 2–y Cd y Sb 2 system, the radius ratio of cations and anionic elements r + /r – for two structure types were thoroughly investigated. For the first time, the r + /r – ratio was identified as a critical factor for the phase selectivity: (1) r + /r – > 1 favored the BaCu 2 S 2 -type phase, and (2) r + /r – < 1 favored the CaAl 2 Si 2 -type phase. Further, we also revealed the structural transformation mechanism from the more widely observed CaAl 2 Si 2 -type phase to the title BaCu 2 S 2 -type phase as the relatively larger cationic elements were introduced to the system. A series of DFT calculations using the three hypothetical models indicated that a resonance peak near EF in the density of states curves was descended from the relatively flat band structure at several special symmetry points rationalizing the enhanced Seebeck coefficients of Ba 0.94(1) Sr 0.06 Zn 1.86(3) Cd 0.14 Sb 2 and Ba 0.96(1) Sr 0.04 Zn 1.68(2) Cd 0.32 Sb 2 . Electron localization function analysis rationalized the correlation between the polarity change of anionic Zn/Cd–Sb bonds and the charge carrier mobility on the anionic frameworks. Temperature-dependent thermoelectric properties were studied for the four title compounds, and the results proved that the Sr and Cd doping in the title Ba 1–x Sr x Zn 2–y Cd y Sb 2 system successfully enhanced the ZT values through the increased Seebeck coefficients and the reduced total thermal conductivities.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Bismuth as a Reactive Solvent in the Synthesis of Multicomponent Transition-Metal-Bearing Bismuthides

Employment of liquid bismuth (Bi) allows the facile single-crystal growth of compounds containing elements with high melting points, provided that these elements have reasonably high solubility in Bi. Utilization of the Bi flux approach yielded two new ternary bismuthides, SrNi 0.17(1) Bi 2 [a defect variant of the BaCuSn 2 type, space group Cmcm , α = 4.879(2) Å, b = 17.580(6) Å, and c = 4.696(2) Å] and CaTi 3 Bi 4 [NdTi 3 (Sn 0.1 Sb 0.9 ) 4 structure type, space group Fmmm , a = 5.6295(7) Å, b = 9.8389(1) Å, and c = 23.905(3) Å]. In addition, the ternary antimonide CaV3Sb4, isostructural with CaTi 3 Bi 4 , was synthesized from antimony (Sb) flux, and analyzed with the goal of validating structural assessment of the bismuthide analogue, where the X-ray crystallographic work proved to be very challenging. All synthesized compounds exhibit complex crystal structures featuring quasi-two-dimensional building blocks of different topologies. First-principle calculations reveal hypervalent bonding in the homoatomic Bi subunits. Lastly, physical property measurements indicate metallic conductivity and the absence of localized magnetism in the studied compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Porous Organic Cage Membranes for Molecular Gas Separations (Final Technical Report for DE-SC0021357)

This proposal aims at demonstrating the development of a novel family of membranes, composed of porous organic cages (POC) which offer the possibility of displaying high separation performance for challenging molecular gas separations relevant to natural gas purification, and olefin/paraffin separation. The proposed POCs synthesized in membrane form will display the most desirable properties of polymers (facile processability and flexibility) and inorganic materials (hierarchically ordered pores with molecular sieving properties) leading to highly selective and permeable membranes. POCs should display distinctive structural, compositional, adsorption and transport properties than those of conventional porous materials, opening the doors for a new research direction in membrane science, and gas separations. Our preliminary results demonstrate the feasibility of preparing POC crystals with controlled size, and continuous POC membranes with remarkable high permeances, and separation ability for CO 2 /CH 4 , N 2 /CH 4 and C 3 H 6 /C 3 H 8 separations serving as a solid foundation for our proposed work. Fundamentally, this proposal aims at elucidating separation mechanisms of different gas mixtures related to natural gas composition, and olefin/paraffin separation over porous organic cage membranes. The proposed research will result in fundamental understanding of adsorption and transport properties of industrially relevant gas molecules through novel microporous membranes, and may lead to the development of a cost effective membrane technology for natural gas purification, and olefin/paraffin separation surpassing the conventional benchmark technology distillation. Furthermore, we aim at demonstrating selective water transport through POC membranes, which can be positively impactful in numerous industrial applications in which water is present. The ability to fabricate thin, chemically and mechanically stable POC membranes for societal relevant gas separations constitute a new and distinctive direction in membrane science. Our proposed work aims at addressing some of the challenges recognized in the Research Agenda for Transforming Separation Science . Specifically: (a) advancing understanding of complex mixtures on separation performance; (b) exploring thermodynamic and kinetic mechanisms through the elucidation of separation mechanisms, and (c) study potential stability issues of the membranes to be assessed by evaluating the long term membrane stability and performance at various temperatures and pressures. The team is uniquely qualified to execute the proposed work. The PI has solid expertise in the rational molecular engineering design of porous crystalline membranes for molecular gas separations. The PNNL collaborator has extensive experience in the synthesis, characterization, and functional applications of microporous crystals, with particular emphasis on gas adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Controlling the Interface between Salts, Solvates, Co-crystals, and Ionic Liquids with Non-stoichiometric Protic Azolium Azolates [Plus Supporting Information]

In this work, a non-stoichiometric approach to control the solid-state behavior of protic ionic liquids (PILs) was demonstrated by direct mixing of 4,5-dicyanoimidazole (HDCNim) with either 1-ethylimidazole (C 2 im) or 1-butylimidazole (C 4 im) in different mole fractions. Isolation and characterization of three crystalline materials (all having melting points < 100 °C, thus fitting the PIL definition) revealed three different but closely related systems. The structure of [HC 2 im][DCNim] consists of a confused proton system, which is so named for the fast proton exchange between basic and acidic fragments and the formation of hydrogen-bonded anionic oligomers. The compound [HC 2 im][DCNim]·HDCNim consists of an oligomeric delocalized anion (a confused proton located between two azole fragments, in which one acts as a neutral moiety while the other as an ionic fragment, DCNim-H-DCNim) and [HC 4 im][DCNim]·HDCNim can be classified as a salt co-crystal. We believe that these observations will allow a deeper understanding of the behavior of “confused protons” and provide additional strategies for controlling the properties of important classes of materials such as active pharmaceutical ingredients.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Rotational Dynamics of an Amphidynamic Zirconium Metal–Organic Framework Determined by Dielectric Spectroscopy

A zirconium metal–organic framework with a difluorophenylene rotator bearing a permanent electric dipole of ~3.2 D was synthesized, and its rotational motion was analyzed by temperature- and frequency-dependent broadband dielectric spectroscopy. While solid-state NMR confirms fast rotation qualitatively, the dissipation factors measured between 113 and 153 K suggested an activation energy E a = 2.6 kcal/mol, but deviations from a single Debye relaxation suggested a dynamic process that cannot be accounted for by a well-defined potential with a single activation barrier. The dynamic heterogeneity of the dipolar rotor was confirmed by analysis in terms of a Cole–Cole relaxation, which suggested a mean barrier of ~1.9 kcal/mol, with a heterogeneity that decreases as temperature increases. Based on the single-crystal structure, we propose that the kinetic heterogeneity results from a temperature-dependent potential where rotation motion is mediated by the escape of the rotator from an energy well created by a double Ph–H···F–Ph hydrogen bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Epitaxial growth mechanism of heterogeneous catalytic oxidation of Mn(II) on manganite under oxic conditions

Manganese oxides are ubiquitous in soils and sediments, and their formation and transformation processes affect the migration and transformation of heavy metals and organic pollutants. Most previous work has been focused the oxidation of Mn(II) on Mn(IV) oxide surface, but it remains poorly understood how Mn(II) interacts with manganite under oxic conditions. Here, the interactions between manganite and dissolved Mn(II) within pH 5.0–9.0 under oxic conditions were systematically studied. The results indicated that adsorbed Mn(II) was directly oxidized to manganite on the surface, and the oxidation rate increased with increasing pH and oxygen partial pressure. Electrons are likely transferred in bulk manganite during the oxidation process of Mn(II). Although manganite induced Mn(II) oxidation and the epitaxial growth of bulk particles, there was no obvious change in mineral phase. Dissolved oxygen accelerated the growth of manganite in Mn(II) solution. Compared with the absence of manganite, the presence of manganite inhibited the formation of hausmannite from Mn(II) oxidation by oxygen in air. Furthermore, this study reveals the catalytic oxidation process and mechanism of Mn(II) on manganite surface, and improves the understanding of manganite crystal growth in supergene environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗