Search NASA⌕ Search

SEARCH · Search NASA

Results for “JET stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Noise Sources in a Low-Reynolds-Number Turbulent Jet at Mach 0.9

The mechanisms of sound generation in a Mach 0.9, Reynolds number 3600 turbulent jet are investigated by direct numerical simulation. Details of the numerical method are briefly outlined and results are validated against an experiment at the same flow conditions. Lighthill's theory is used to define a nominal acoustic source in the jet, and a numerical solution of Lighthill's equation is compared to the simulation to verify the computational procedures. The acoustic source is Fourier transformed in the axial coordinate and time and then filtered in order to identify and separate components capable of radiating to the far field. This procedure indicates that the peak radiating component of the source is coincident with neither the peak of the full unfiltered source nor that of the turbulent kinetic energy. The phase velocities of significant components range from approximately 5% to 50% of the ambient sound speed which calls into question the commonly made assumption that the noise sources convect at a single velocity. Space-time correlations demonstrate that the sources are not acoustically compact in the streamwise direction and that the portion of the source that radiates at angles greater than 45 deg. is stationary. Filtering non-radiating wavenumber components of the source at single frequencies reveals that a simple modulated wave forms for the source, as might be predicted by linear stability analysis. At small angles from the jet axis the noise from these modes is highly directional, better described by an exponential than a standard Doppler factor.

Freund, Jonathan B.↗
NASA NTRS1979

Temperature and species concentration measurements in a swirl-stabilized combustor

An experimental evaluation of a swirl-stabilized combustor is presented. The combustor is composed of two confined, concentric, swirling jets. The inner jet flow is lean premixed methane and air; the outer flow is air. Combustion is stabilized on a swirl-induced recirculation zone. Mean temperature and mean concentrations of major species are measured throughout the combustor, including the recirculation zone. Fine wire thermocouples are used to measure temperature. A gas chromatograph and a chemi-luminescence analyzer are employed to analyze samples extracted by a water-cooled gas-sampling probe. Results are presented in the form of isotherms and isopleths of species concentration in the combustor for two swirl conditions: co-swirl and counter-swirl. The effects of swirl on the combustion are discussed in light of flame quenching due to rapid dilution and cooling of the reacting inner jet flow by mixing with the outer flow. Evidence for probe induced perturbations of the combustion process is observed.

Oven, M. J.↗
DOE OSTI2022

The role of cool-flame fluctuations in high-pressure spray flames, studied using high-speed optical diagnostics and Large-Eddy Simulations

Here this work investigates the low- and high-temperature ignition and combustion processes, applied to the Engine Combustion Network Spray A flame, combining advanced optical diagnostics and large-eddy simulations (LES). Simultaneous high-speed (50 kHz) formaldehyde (CH 2 0) planar laser-induced fluorescence (PLIF) and line-of-sight OH* chemiluminescence imaging were used to measure the low- and high-temperature flame, during ignition as well as during quasi-steady combustion. While tracking the cool flame at the laser sheet plane, the present experimental setup allows detection of distinct ignition spots and dynamic fluctuations of the lift-off length over time, which overcomes limitations for flame tracking when using schlieren imaging. After significant development to improve LES prediction of the low-and high-temperature flame position, both during the ignition processes and quasi-steady combustion, the simulations were analyzed to gain understanding of the mixture variance and how this variance affects formation/consumption of CH 2 0. Analysis of the high-temperature ignition period shows that a key improvement in the LES is the ability to predict heterogeneous ignition sites, not only in the head of the jet, but in shear layers at the jet edge close to the position where flame lift-off eventually stabilizes. The LES analysis also shows concentrated pockets of CH 2 0, in the center of jet and at 20 mm downstream of the injector (in regions where the equivalence ratio is greater than 6), that are of similar length scale and frequency as the experiment (approximately 5–6 kHz). The periodic oscillation of CH 2 0 match the frequency of pressure waves generated during auto-ignition and reflected within the constant-volume vessel throughout injection. The ability of LES to capture the periodic appearance and destruction of CH 2 0 is particularly important because these structures travel downstream and become rich premixed flames that affect soot production.

42 ENGINEERING↗
NASA NTRS1972

Effects of an in-flight thrust reverser on the stability and control characteristics of a single-engine fighter airplane model

The changes in thrust minus drag performance as well as longitudinal and directional stability and control characteristics of a single-engine jet aircraft attributable to an in-flight thrust reverser of the blocker-deflector door type were investigated in a 16-foot transonic wind tunnel. The longitudinal and directional stability data are presented. Test conditions simulated landing approach conditions as well as high speed maneuvering such as may be required for combat or steep descent from high altitude.

Mercer, C. E.↗
NASA NTRS1999

Influence of Buoyant Convection on the Stability of Enclosed Laminar Flames

Enclosed diffusion flames are commonly found in practical combustion systems, such as the power-plant combustor, gas turbine combustor, and jet engine after-burner. In these systems, fuel is injected into a duct with a co-flowing or cross-flowing air stream. In combustors, this flame is anchored at the burner (i.e., fuel jet inlet) unless adverse conditions cause the flame to lift off or blow out. Investigations of burner stability study the lift off, reattachment, and blow out of the flame. There have been numerous studies of flame stability. Relatively few studies have investigated the stability of flames with an oxidizer co-flow, compared with the number of studies on (nearly) free jet diffusion flames. The air flow around the fuel jet can significantly alter the lift off, reattachment and blow out of the jet diffusion flame. In normal gravity, however, the effects of the air flow on flame stability are often complicated by the presence of buoyant convection. A comparison of normal-gravity and microgravity flames can provide clear indication of the influence of forced and buoyant flows on the flame stability. The overall goal of the Enclosed Laminar Flames (ELF) research, described at the following URL site: http://zeta.lerc.nasa.gov/expr/elf.htm, is to improve our understanding of the effects of buoyant convection on the structure and stability of co-flow diffusion flames.

Brooker, John E.↗
DOE OSTI2022

Understanding the role of flow dynamics in thermoacoustic combustion instability

Thermoacoustic combustion instability is one of the most challenging operational issues in several high-performance, low-emissions combustion technologies, including gas turbines, aircraft engines, rockets, and industrial boilers. Driven by the coupling between combustor acoustics and flame heat release rate fluctuations, thermoacoustic combustion instability can lead to reduced operability, increased emissions, and, in the most extreme cases, catastrophic failure of combustor components. The feedback loop between acoustics and combustion is often facilitated by fluid mechanic oscillations, referred to as “velocity coupling,” whereby acoustic oscillations drive flow fluctuations, which in turn create fluctuations in the flame. The character of these fluid mechanic oscillations is highly dependent on the structure of the flow field and the receptivity of the flow to external excitation. Combustor flow fields use features like fluid recirculation and shear to enhance flame holding and reduce emissions, but these are also the same features that can make the flow receptive to acoustic excitation or even drive self-excited oscillations. Here, in this paper, we discuss the basics of thermoacoustic instability with a focus on the role of hydrodynamic oscillations in typical combustor flows. To facilitate this discussion, we explore the hydrodynamic instability characteristics of several key combustor unit flows (wakes, swirling jets, etc.) and show how the hydrodynamic stability of a flow is an important consideration in determining a combustor’s propensity for thermoacoustic oscillations. Several examples of coupling between hydrodynamics and thermoacoustics are discussed to illustrate this important link. The paper concludes by discussing the potential for designing flow fields that are thermoacoustic instability resistant, either through a reduction in the receptivity of the flow or through nonlinear coupling mechanisms by which self-excited flow instabilities can suppress velocity-coupled combustion oscillations.

42 ENGINEERING↗
DOE OSTI2023

Quantitation of olefins in sustainable aviation fuel intermediates using principal component analysis coupled with vacuum ultraviolet spectroscopy

Olefins, a common intermediate from biomass conversion processes, are undesirable in jet fuel because of their poor thermal stability. This paper presents an approach for olefin quantitation using 2D gas chromatography coupled with vacuum ultraviolet spectroscopy. Principal component analysis was used to reduce the dimensionality of the spectroscopic data from a highly olefinic fuel intermediate. A principal component template was created that enabled olefin quantitation, which was compared to the existing GCxGC-VUV approach from the literature. The principal component method was able to identify and quantify trace amounts of cyclodienes, which were present at only 0.01 wt% in the fuel sample. The principal component approach also identifies species that fall outside of the GCxGC template. For instance, quantitation with the literature method resulted in an olefin concentration of 0.95 times that of the principal component method due to olefins falling outside of the expected GCxGC regions. The principal component results were compared with 13 C and 1 H NMR data, which confirmed that the fuel had a high concentration of olefins and alkanes with little aromatic content.

Kosir, Shane↗
NASA NTRS1973

Initial flight and simulator evaluation of a head up display for standard and noise abatement visual approaches

A preliminary assessment was made of the adequacy of a simple head up display (HUD) for providing vertical guidance for flying noise abatement and standard visual approaches in a jet transport. The HUD featured gyro-stabilized approach angle scales which display the angle of declination to any point on the ground and a horizontal flight path bar which aids the pilot in his control of the aircraft flight path angle. Thirty-three standard and noise abatement approaches were flown in a Boeing 747 aircraft equipped with a head up display. The HUD was also simulated in a research simulator. The simulator was used to familiarize the pilots with the display and to determine the most suitable way to use the HUD for making high capture noise abatement approaches. Preliminary flight and simulator data are presented and problem areas that require further investigation are identified.

Bourquin, K.↗
NASA NTRS1977

Thermal stability of some aircraft turbine fuels derived from oil shale and coal

Thermal stability breakpoint temperatures are shown for 32 jet fuels prepared from oil shale and coal syncrudes by various degrees of hydrogenation. Low severity hydrotreated shale oils, with nitrogen contents of 0.1 to 0.24 weight percent, had breakpoint temperatures in the 477 to 505 K (400 to 450 F) range. Higher severity treatment, lowering nitrogen levels to 0.008 to 0.017 weight percent, resulted in breakpoint temperatures in the 505 to 533 K (450 to 500 F) range. Coal derived fuels showed generally increasing breakpoint temperatures with increasing weight percent hydrogen, fuels below 13 weight percent hydrogen having breakpoints below 533 K (500 F). Comparisons are shown with similar literature data.

Reynolds, T. W.↗
NASA NTRS1980

Determination of jet fuel thermal deposit rate using a modified JFTOT

Three fuels having different breakpoint temperatures were studied in the modified jet fuel thermal oxidation tester. The lower stability fuel with a breakpoint of 240 C was first stressed at a constant temperature. After repeating this procedure at several different temperatures, an Arrehenius plot was drawn from the data. The correlation coefficient and the energy of activation were calculated to be 0.97 and 8 kcal/mole respectively. Two other fuels having breakpoint temperatures of 271 C and 285 C were also studied in a similar manner. A straight line was drawn through the data at a slope equivalent to the slope of the lower stability fuel. The deposit formation rates for the three fuels were determined at 260 C, and a relative deposit formation rate at this temperature was calculated and plotted as a function of the individual fuel's breakpoint temperatures.

Nowack, C. J.↗
NASA NTRS1981

Preliminary analysis of STS-1 entry flight data

A preliminary analysis of data acquired during the first shuttle orbiter reentry is presented. Heating levels were higher than predicted. Variations in measured versus predicted lift to drag ratio and trim are discussed, as are plots showing time histories of control surface and jet activity. The confidence felt in the stability and control derivatives is only fair. Confidence in the derivatives extracted for Mach numbers below 3.5 is especially weak, because these derivatives were affected by sideslip data contaminated by wind and turbulence, nonindependent rudder motions, and buffet. The sources of the data used are described. Recommendations are presented for changes to the Aerodynamic Data Book, and for planning future flights.

Source record↗
NASA NTRS1990

Stochastic performance robustness of aircraft control systems

Stochastic robustness, a simple technique used to estimate the robustness of linear, time-invariant systems, is applied to a twin-jet transport aircraft control system. Concepts behind stochastic stability robustness are extended to stochastic performance robustness. Stochastic performance robustness measures based on classical design specifications and measures specific to aircraft handling qualities are introduced. Confidence intervals for both individual stochastic robustness measures and for comparing two measures are presented. The application of stochastic performance robustness, the use of confidence intervals, and tradeoffs between performance objectives are demonstrated by means of the twin-jet aircraft example.

Stengel, Robert F.↗
DOE OSTI2020

Understanding and mitigating process drift in aerosol jet printing

Aerosol jet printing offers a versatile, high-resolution prototyping capability for flexible and hybrid electronics. Despite its rapid growth in recent years, persistent problems such as process drift hinder the adoption of this technology in production environments. Here we explore underlying causes of process drift during aerosol jet printing and introduce an engineered solution to improve deposition stability. In this work it is shown that the ink level within the cartridge is a critical factor in determining atomization efficiency, such that the reduction in ink volume resulting from printing itself can induce significant and systematic process drift. By integrating a custom 3D-printed cartridge with an ink recirculation system, ink composition and level within the cartridge are better maintained. This strategy allows extended duration printing with improved stability, as evidenced by 30 h of printing over 5 production runs. This provides an important tool for extending the duration and improving reliability for aerosol jet printing, a key factor for integration in practical manufacturing operations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The H I content of red geyser galaxies

Red geysers are a specific type of quiescent galaxy, denoted by twin jets emerging from their galactic centres. These bisymmetric jets possibly inject energy and heat into the surrounding material, effectively suppressing star formation by stabilizing cool gas. In order to confirm the presence and evolutionary consequences of these jets, this paper discusses the scaling, stacking, and conversion of 21-cm H I flux data sourced from the H I -MaNGA survey into H I gas-to-stellar mass (G/S) spectra. Our samples were dominated by non-detections, or galaxies with weak H I signals, and consequently by H I upper limits. The stacking technique discussed successfully resolved emission features in both the red geyser G/S spectrum and the control sample G/S spectrum. From these stacked spectra, we find that on average, red geyser galaxies have G/S of 0.086 ± 0.011 (random) + 0.029 (systematic), while non-red geyser galaxies of similar stellar mass have a G/S ratio of 0.039 ± 0.018 (random) + 0.013 (systematic). Therefore, we find no statistically significant evidence that the H I content of red geysers is different from the general quiescent population.

79 ASTRONOMY AND ASTROPHYSICS↗