Search NASA⌕ Search

SEARCH · Search NASA

Results for “LANDING SIMULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

The role of simulation in determining safe aircraft landing separation criteria

The role of flight simulation in determining safe aircraft landing separation criteria is reviewed and discussed. A broad conclusion is made that previous vortex-encounter simulations were useful for predicting the general response of an aircraft in the presence of trailing vortices and the type of separation criteria to emphasize. These simulations, however, were generally limited in scope and validation. Broad requirements for an accepted simulation methodology are presented. Key technological issues are addressed, including the addition of high-fidelity vortex models and aircraft/vortex interaction effects in the simulation, and validation of simulations with experimental data. Finally, results from a preliminary one-degree-of-freedom simulation are shown. These indicate that reduced landing spacings may be feasible and that current aircraft categorizations should be reviewed.

Stuever, Robert A.↗

Unsteady Simulation of a Landing-Gear Flow Field

This paper presents results of an unsteady Reynolds-averaged Navier-Stokes simulation of a landing-gear flow field. The geometry of the four-wheel landing gear assembly consists of several of the fine details including the oleo-strut, two diagonal struts, a door, yokes/pin and a flat-plate simulating the wing surface. The computational results, obtained by using 13.3 million grid points, are presented with an emphasis on the characteristics of the unsteadiness ensuing from different parts of the landing-gear assembly, including vortex shedding patterns and frequencies of dominant oscillations. The results show that the presence of the diagonal struts and the door significantly influence the flow field. Owing to the induced asymmetry, vortices are shed only from one of the rear wheels and not the other. Present computations also capture streamwise vortices originating from the upstream corners of the door.

Li, Fei↗

A compilation and analysis of typical approach and landing data for a simulator study of an externally blown flap STOL aircraft

A piloted simulation study has been made of typical landing approaches with an externally blown flap STOL aircraft to ascertain a realistic dispersion of parameter values at both the flare window and touchdown. The study was performed on a fixed-base simulator using standard cockpit instrumentation. Six levels of stability and control augmentation were tested during a total of 60 approaches (10 at each level). A detached supplement containing computer printouts of the flare-window and touchdown conditions for all 60 runs has been prepared.

Middleton, D. B.↗

Mechanical Testing of Soils from the South Range of the Utah Test and Training Range: Derivation of Soil Properties to Support the Earth Entry System Landing for Mars Sample Return

This report summarizes results from laboratory tests conducted by Applied Research Associates, Inc. (ARA) on soil samples collected from multiple sites within the South Range of the U.S. Air Force Utah Test and Training Range (UTTR). The goal of the laboratory tests was to establish soil constitutive properties and develop computational soil models enabling NASA to simulate impact landings of the Earth Entry System (EES) for the Mars Sample Return (MSR) mission. Test methods and results are presented describing the strength, compressibility, and stiffness of soils in the UTTR South Range including methods to incorporate the measured properties into Ansys LS-DYNAÒ constitutive material models for EES landing simulations.

Soil↗

Motion/visual cueing requirements for vortex encounters during simulated transport visual approach and landing

This paper addresses the issues of motion/visual cueing fidelity requirements for vortex encounters during simulated transport visual approaches and landings. Four simulator configurations were utilized to provide objective performance measures during simulated vortex penetrations, and subjective comments from pilots were collected. The configurations used were as follows: fixed base with visual degradation (delay), fixed base with no visual degradation, moving base with visual degradation (delay), and moving base with no visual degradation. The statistical comparisons of the objective measures and the subjective pilot opinions indicated that although both minimum visual delay and motion cueing are recommended for the vortex penetration task, the visual-scene delay characteristics were not as significant a fidelity factor as was the presence of motion cues. However, this indication was applicable to a restricted task, and to transport aircraft. Although they were statistically significant, the effects of visual delay and motion cueing on the touchdown-related measures were considered to be of no practical consequence.

Parrish, R. V.↗

Large-Eddy Simulation of Shallow Cumulus over Land: A Composite Case Based on ARM Long-Term Observations at Its Southern Great Plains Site

Based on long-term observations by the Atmospheric Radiation Measurement program at its Southern Great Plains site, a new composite case of continental shallow cumulus (ShCu) convection is constructed for large-eddy simulations (LES) and single-column models. The case represents a typical daytime nonprecipitating ShCu whose formation and dissipation are driven by the local atmospheric conditions and land surface forcing and are not influenced by synoptic weather events. The case includes early morning initial profiles of temperature and moisture with a residual layer; diurnally varying sensible and latent heat fluxes, which represent a domain average over different land surface types; simplified large-scale horizontal advective tendencies and subsidence; and horizontal winds with prevailing direction and average speed. Observed composite cloud statistics are provided for model evaluation. The observed diurnal cycle is well reproduced by LES; however, the cloud amount, liquid water path, and shortwave radiative effect are generally underestimated. LES are compared between simulations with an all-or-nothing bulk microphysics and a spectral bin microphysics. The latter shows improved agreement with observations in the total cloud cover and the amount of clouds with depths greater than 300 m. When compared with radar retrievals of in-cloud air motion, LES produce comparable downdraft vertical velocities, but a larger updraft area, velocity, and updraft mass flux. Both observations and LES show a significantly larger in-cloud downdraft fraction and downdraft mass flux than marine ShCu.

58 GEOSCIENCES↗

The impact of climate, CO2, nitrogen deposition and land use change on simulated contemporary global river flow

We investigated how climate, rising atmospheric CO2 concentration, increasing anthropogenic nitrogen deposition and land use change influenced continental river flow over the period 1948-2004 using the Community Land Model version 4 (CLM4) with coupled river transfer model (RTM), a global river routing scheme. The model results indicate that the global mean river flow shows significant decreasing trend and climate forcing likely functions as the dominant controller of the downward trend during the study period. Nitrogen deposition and land use change account for about 5% and 2.5% of the decrease in simulated global scale river flow, respectively, while atmospheric CO2 accounts for an upward trend. However, the relative role of each driving factor is heterogeneous across regions in our simulations. The trend in river flow for the Amazon River basin is primarily explained by CO2, while land use change accounts for 27.4% of the downward trend in river flow for the Yangtze rive basin. Our simulations suggest that to better understand the trends of river flow, it is not only necessary to take into account the climate, but also to consider atmospheric composition, carbon-nitrogen interaction and land use change, particularly for regional scales.

Shi, Xiaoying↗

Sensitivity of Global Terrestrial Gross Primary Production to Hydrologic States Simulated by the Community Land Model Using Two Runoff Parameterizations

The terrestrial water and carbon cycles interact strongly at various spatio-temporal scales. To elucidate how hydrologic processes may influence carbon cycle processes, differences in terrestrial carbon cycle simulations induced by structural differences in two runoff generation schemes were investigated using the Community Land Model 4 (CLM4). Simulations were performed with runoff generation using the default TOPMODEL-based and the Variable Infiltration Capacity (VIC) model approaches under the same experimental protocol. The comparisons showed that differences in the simulated gross primary production (GPP) are mainly attributed to differences in the simulated leaf area index (LAI) rather than soil moisture availability. More specifically, differences in runoff simulations can influence LAI through changes in soil moisture, soil temperature, and their seasonality that affect the onset of the growing season and the subsequent dynamic feedbacks between terrestrial water, energy, and carbon cycles. As a result of a relative difference of 36% in global mean total runoff between the two models and subsequent changes in soil moisture, soil temperature, and LAI, the simulated global mean GPP differs by 20.4%. However, the relative difference in the global mean net ecosystem exchange between the two models is small (2.1%) due to competing effects on total mean ecosystem respiration and other fluxes, although large regional differences can still be found. Our study highlights the significant interactions among the water, energy, and carbon cycles and the need for reducing uncertainty in the hydrologic parameterization of land surface models to better constrain carbon cycle modeling.

carbon↗

An in-flight simulation of approach and landing of a STOL transport with adverse ground effect

The results of an in-flight simulation program undertaken to study the problems of landing a representative STOL transport in the presence of adverse ground effects are presented. Landings were performed with variations in ground effect magnitude, ground effect lag, and thrust response. Other variations covered the effects of augmented lift response, SAS-failures, turbulence, segmented approach, and flare warning. The basic STOL airplane required coordinated use of both stick and throttle for consistently acceptable landings, and the presence of adverse ground effects made the task significantly more difficult. Ground effect lag and good engine response gave noticeable improvement, as did augmented lift response.

Ellis, D. R.↗

Comparing the Performance of Three Land Models in Global C Cycle Simulations: A Detailed Structural Analysis: Structural Analysis of Land Models

Land models are valuable tools to understand the dynamics of global carbon (C) cycle. Various models have been developed and used for predictions of future C dynamics but uncertainties still exist. Diagnosing the models’ behaviors in terms of structures can help to narrow down the uncertainties in prediction of C dynamics. In this study three widely used land surface models, namely CSIRO’s Atmosphere Biosphere Land Exchange (CABLE) with 9 C pools, Community Land Model (version 3.5) combined with Carnegie-Ames-Stanford Approach (CLM-CASA) with 12 C pools and Community Land Model (version 4) (CLM4) with 26 C pools were driven by the observed meteorological forcing. The simulated C storage and residence time were used for analysis. The C storage and residence time were computed globally for all individual soil and plant pools, as well as net primary productivity (NPP) and its allocation to different plant components’ based on these models. Remotely sensed NPP and statistically derived HWSD, and GLC2000 datasets were used as a reference to evaluate the performance of these models. Results showed that CABLE exhibited better agreement with referenced C storage and residence time for plant and soil pools, as compared with CLM-CASA and CLM4. CABLE had longer bulk residence time for soil C pools and stored more C in roots, whereas, CLM-CASA and CLM4 stored more C in woody pools due to differential NPP allocation. Overall, these results indicate that the differences in C storage and residence times in three models are largely due to the differences in their fundamental structures (number of C pools), NPP allocation and C transfer rates. Our results have implications in model development and provide a general framework to explain the bias/uncertainties in simulation of C storage and residence times from the perspectives of model structures.

54 ENVIRONMENTAL SCIENCES↗

Multi-Model Monte Carlo Estimators for Trajectory Simulation

Predicting landing radius and other quantities of interest (QoI) for entry, descent, andlanding (EDL) applications requires a viable uncertainty propagation method for quantifying the impact of uncertainties in aerodynamics, atmosphere, mass properties, etc. While standard Monte Carlo (MC) simulation is the de facto standard for producing robust and unbiasedstatistical estimators, it is often infeasible for expensive, high-fidelity models. Low-fidelity models are commonly constructed to replace the high-fidelity model in MC simulation for computational speedup, but at the expense of accuracy and unbiasedness. Emerging multi-model MC methods are bridging this gap by combining predictions from two or more modelsof varying fidelity and computational cost for efficient and unbiased uncertainty propagation.This works establishes a proof of concept for using multi-model MC to increase the speed and precision of trajectory simulation for EDL. It is shown that combining a high-fidelity EDL model with low-fidelity models (e.g., data-driven, reduced physics) in this manner has the potential to yield significant efficiency and accuracy gains for certain EDL QoIs versusa standard MC approach. Moreover, the unbiasedness of multi-model MC predictions ishighlighted by showing increased accuracy versus an approach that leverages a low-fidelity model alone.

James E Warner↗

ADVANCES IN PLUME-SURFACE INTERACTION SIMULATION CAPABILITY UNDER LUNAR LANDING CONDITIONS

The Fluid Dynamics Branch at theNASA Marshall Space Flight Center has assembled a portfolio of simulation tools to predict Plume-SurfaceInteraction (PSI) environments during extra-terrestrial propulsive landings. Particular focus is on engineering support for lunar landers such as robotic CommercialLunar Payload Services (CLPS) and the HumanLander System (HLS). Extension of existing PSI simulation capabilities are required to accurately capture the complex plume flow conditions and surface soil particle composition effects that arise in the lunar environment. The required model development and implementation, and extensive verification and validation of the key simulation tools, Loci/Chem [1]and Loci/Boltzmann [2], and Loci/GGFS [3] are now performed under a NASA Space Technology MissionDirectorate (STMD) funded multi-year GameChanging Development (GCD) project. The project will implement and mature these new modeling features and verify and validate them for the Mars andMoon environments with the aid of existing and new experiments to be performed under this project

Plume Surface Interaction↗

Aeroacoustic Simulations of a Nose Landing Gear with FUN3D: A Grid Refinement Study

A systematic grid refinement study is presented for numerical simulations of a partially-dressed, cavity-closed (PDCC) nose landing gear configuration that was tested in the University of Florida's open-jet acoustic facility known as the UFAFF. The unstructured-grid flow solver FUN3D is used to compute the unsteady flow field for this configuration. Mixed-element grids generated using the Pointwise (Registered Trademark) grid generation software are used for numerical simulations. Particular care is taken to ensure quality cells and proper resolution in critical areas of interest in an effort to minimize errors introduced by numerical artifacts. A set of grids was generated in this manner to create a family of uniformly refined grids. The finest grid was then modified to coarsen the wall-normal spacing to create a grid suitable for the wall-function implementation in FUN3D code. A hybrid Reynolds-averaged Navier-Stokes/large eddy simulation (RANS/LES) turbulence modeling approach is used for these simulations. Time-averaged and instantaneous solutions obtained on these grids are compared with the measured data. These CFD solutions are used as input to a FfowcsWilliams-Hawkings (FW-H) noise propagation code to compute the farfield noise levels. The agreement of the computed results with the experimental data improves as the grid is refined.

Vatsa, Veer N.↗

A Comparative Study of Simulated and Measured Main Landing Gear Noise for Large Civil Transports

Computational results for the NASA 26%-scale model of a six-wheel main landing gear with and without a toboggan-shaped noise reduction fairing are presented. The model is a high-fidelity representation of a Boeing 777-200 aircraft main landing gear. A lattice Boltzmann method was used to simulate the unsteady flow around the model in isolation. The computations were conducted in free-air at a Mach number of 0.17, matching a recent acoustic test of the same gear model in the Virginia Tech Stability Wind Tunnel in its anechoic configuration. Results obtained on a set of grids with successively finer spatial resolution demonstrate the challenge in resolving/capturing the flow field for the smaller components of the gear and their associated interactions, and the resulting effects on the high-frequency segment of the farfield noise spectrum. Farfield noise spectra were computed based on an FWH integral approach, with simulated pressures on the model solid surfaces or flow-field data extracted on a set of permeable surfaces enclosing the model as input. Comparison of these spectra with microphone array measurements obtained in the tunnel indicated that, for the present complex gear model, the permeable surfaces provide a more accurate representation of farfield noise, suggesting that volumetric effects are not negligible. The present study also demonstrates that good agreement between simulated and measured farfield noise can be achieved if consistent post-processing is applied to both physical and synthetic pressure records at array microphone locations.

Konig, Benedikt↗

Agreement of Analytical and Simulation-Based Estimates of the Required Land Depth in Climate Models

Previous analytical and simulation-based analyses suggest that deeper land surface models are needed to realistically simulate the terrestrial thermal state in climate models, with implications for land-atmosphere interactions. Analytical approaches mainly focused on the subsurface propagation of harmonics such as the annual temperature signal, and a direct comparison with climate-change model output has been elusive. Here, this study addresses the propagation of a harmonic pulse fitted to represent the timescale and amplitude of anthropogenic warming. Its comparison to land model simulations with stepwise increased bottom boundary depth leads to an agreement between the simulation-based and analytical frameworks for long-term climate trends. Any depth increase gradually decreases the relative error in the subsurface thermodynamics, and a minimum depth of 170 m is recommended to simulate the ground climate adequately. The approach provides an accurate estimate of the required land-model depth for climate-change simulations and assesses the relative bias in insufficiently deep land models.

54 ENVIRONMENTAL SCIENCES↗

Flight test of an automatic approach and landing concept for a simulated space shuttle represented by the NASA Convair 990 aircraft

Unpowered automatic approaches and landings were conducted to study navigation, guidance, and control problems associated with terminal area, approach, and landing operation for the space shuttle. A Convair 990 aircraft was equipped with a digital flight-control computer connected to the aircraft control systems and displays. The flight tests evaluated, from 11,300 m to touchdown, the performance of a navigation and guidance concept that utilized blended radio/inertial navigation with VOR, DME, and ILS as the ground radio navigation aids. The results from 36 automatic approaches and landings are analyzed. Preliminary results indicate that this concept may provide sufficient accuracy that automatic landing of the unpowered shuttle orbiter can be accomplished on a conventional size runway.

Smith, D. W.↗