Search NASA⌕ Search

SEARCH · Search NASA

Results for “Logistics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Programmable Thermostat Module Upgrade for the Multipurpose Logistics Module

The STS-121/ULF 1.1 mission was the maiden flight of the programmable thermostat module (PTM) system used to control the 28 V shell heaters on the multi-purpose logistics module (MPLM). These PTMs, in conjunction with a data recorder module (DRM), provide continuous closed loop temperature control and data recording of MPLM on-orbit heater operations. This Technical Memorandum discusses the hardware design, development, test, and verification (DDT&V) activities performed at the Marshall Space Flight Center as well as the operational implementation and mission performance.

Clark, D. W.↗

Multi-Purpose Logistics Module (MPLM) Cargo Heat Exchanger

This paper describes the New Shuttle Orbiter's Multi- Purpose Logistics Modulo (MPLM) Cargo Heat Exchanger (HX) and associated MPLM cooling system. This paper presents Heat Exchanger (HX) design and performance characteristics of the system.

Zampiceni, John J.↗

Front-End Analysis Cornerstone of Logistics

The presentation provides an overview of Front-End Logistics Support Analysis (FELSA), when it should be performed, benefits of performing FELSA and why it should be performed, how it is conducted, and examples.

Nager, Paul J.↗

International Space Station (ISS) Gas Logistics Planning in the Post Shuttle Era

Over its life the International Space Station (ISS) has received gas (nitrogen, oxygen, and air) from various sources. Nitrogen and oxygen are used in the cabin to maintain total pressure and oxygen partial pressures within the cabin. Plumbed nitrogen is also required to support on-board experiments and medical equipment. Additionally, plumbed oxygen is required to support medical equipment as well as emergency masks and most importantly EVA support. Gas are supplied to ISS with various methods and vehicles. Vehicles like the Progress and ATV deliver nitrogen (both as a pure gas and as air) and oxygen via direct releases into the cabin. An additional source of nitrogen and oxygen is via tanks on the ISS Airlock. The Airlock nitrogen and oxygen tanks can deliver to various users via pressurized systems that run throughout the ISS except for the Russian segment. Metabolic oxygen is mainly supplied via cabin release from the Elektron and Oxygen Generator Assembly (OGA), which are water electrolyzers. As a backup system, oxygen candles (Solid Fuel Oxygen Generators-SFOGs) supply oxygen to the cabin as well. In the past, a major source of nitrogen and oxygen has come from the Shuttle via both direct delivery to the cabin as well as to recharge the ISS Airlock tanks. To replace the Shuttle capability to recharge the ISS Airlock tanks, a new system was developed called Nitrogen/Oxygen Recharge System (NORS). NIORS consists of high pressure (7000 psi) tanks which recharge the ISS Airlock tanks via a blowdown fill for both nitrogen and oxygen. NORS tanks can be brought up on most logistics vehicles such as the HTV, COTS, and ATV. A proper balance must be maintained to insure sufficient gas resources are available on-orbit so that all users have the required gases via the proper delivery method (cabin and/or plumbed).

Leonard, Daniel J.↗

NASA Space Rocket Logistics Challenges

The Space Launch System (SLS) is the new NASA heavy lift launch vehicle in development and is scheduled for its first mission in 2017. SLS has many of the same logistics challenges as any other large scale program. However, SLS also faces unique challenges. This presentation will address the SLS challenges, along with the analysis and decisions to mitigate the threats posed by each.

Bramon, Chris↗

SpaceNet: Modeling and Simulating Space Logistics

This paper summarizes the current state of the art in interplanetary supply chain modeling and discusses SpaceNet as one particular method and tool to address space logistics modeling and simulation challenges. Fundamental upgrades to the interplanetary supply chain framework such as process groups, nested elements, and cargo sharing, enabled SpaceNet to model an integrated set of missions as a campaign. The capabilities and uses of SpaceNet are demonstrated by a step-by-step modeling and simulation of a lunar campaign.

Lee, Gene↗

Collaborative Autonomous Logistics

This video shows a demonstration of collaborative autonomous logistics. Turtlebot, a 1-g stand-in for Astrobee, carried REALM sensors around a mockup of ISS in ARGOS to autonomously survey for a cargo bag stowed in a drawer. It provided the location of the bag to Robonaut, which then autonomously climbed across the mockup to the drawer. Robonaut then used the Affordance Template manipulation framework to localize and open the drawer and then again localize and retrieve the cargo bag.

Badger, Julia M.↗

Surviving and Thriving in Space and on Earth's Oceans, Human Logistics and Sustainability: Comparisons and Considerations

Ocean exploration sailing journeys from hundreds of years ago typically required large vessels and large crews (in comparison with today’s space capsules) to travel between the continents and around the world. Modern sailors of today are able to complete similar distant voyages, in small vessels, with a minimal crew, comparable in size to modern space travel crews. This paper uses a systems engineering approach (e.g. using the NASA Human Integration Design Handbook (HIDH), NASA-SP-2010-3407, 2010 and the “Advanced Life Support Baseline Values and Assumptions Document, (BVAD)” NASA-CR-2004-208941, 2004.), to examine and compare the logistics and sustainability aspects of a small crew traveling on Earth's oceans in sailing vessels versus humans traveling in space. The “Mālama Honua Worldwide Voyage” of the Hōkūleʻa, a replica of an ancient Hawaiian double hulled sailing canoe, will be used as a baseline minimalist case study. This is a good comparison case since the Polynesian exploration of the vast (and virtually empty) Pacific Ocean with limited resources is an analogue to human space travel. A modern sailboat is compared to the ancient Polynesian methods and then a space craft is assessed with similar functional decomposition methods. In 1992 during his second Space Shuttle mission (STS-52, Columbia) Astronaut Lacy Veach received a radio message from a student: "What are the similarities and differences between canoe and space travel?" Astronaut Charles Lacy Veach answered, "Both are voyages of exploration. Hōkūle‘a is in the past, Columbia is in the future." Navigator Nainoa Thompson added from the sailing canoe, "Columbia is the highest achievement of modern technology today, a voyaging canoe was the highest achievement of technology in its day." This paper is dedicated to the memory of two great Hawaiian astronauts: US Air Force Colonel Charles Lacy Veach and US Air Force Colonel Ellison Onizuka and to legendary waterman and Hōkūleʻa crew member Eddie Aikau who was lost at sea in 1978, at the beginning of a 30-day, 2,500-mile (4,000km) journey by the Hōkūleʻa to follow the ancient route of the Polynesian migration between the Hawaiian and Tahitian island chains.

Robert P Mueller↗

Trajectory Design for a Solar Necklace of Repurposed Gateway Logistics Modules

The Solar Necklace mission concept, initially formed from a study conducted by the Compass Team at NASA’s Glenn Research Center, aims to maximize the scientific potential of a spacecraft’s lifetime by redefining their proposed disposal trajectories. By repurposing logistics modules (LMs) initially designated for heliocentric disposal after servicing NASA’s Gateway, a constellation of spacecraft could be placed around the sun. This paper assesses the feasibility of reusing vehicles equipped with solar science packages, sending them into a heliocentric orbit to enhance solar science capabilities, and potentially provide early warning capabilities for future piloted spacecraft. A comprehensive analysis of the trajectory design aspects for the Solar Necklace mission was performed, highlighting key components of the study such as Earth-relative drift rates, ∆v requirements, Earth-flyby opportunities, number of lunar flybys, and final orbital state parameters. Additionally, the paper serves as a proof-of-concept for the repurposing of Gateway LMs using convenient, low-cost methods of advancing solar science, space weather understanding, and climate research.

Mission Design↗

FUTURE LOGISTICS AND OPERATIONAL ADAPTABILITY

While we cannot predict the future, we can ascertain trends and examine them through the use of alternative futures methodologies and tools. From a logistics perspective, we know that many different futures are possible, all of which are obviously dependent on decisions we make in the present. As professional logisticians we are obligated to provide the field - our Soldiers - with our best professional opinion of what will result in success on the battlefield. Our view of the future should take history and contemporary conflict into account, but it must also consider that continuity with the past cannot be taken for granted. If we are too focused on past and current experience, then our vision of the future will be limited indeed. On the one hand, the future must be explained in language that does not defy common sense. On the other hand, the pace of change is such that we must conduct qualitative and quantitative trend analyses, forecasting, and explorative scenario development in ways that allow for significant breaks - or "shocks" - that may "change the game". We will need capabilities and solutions that are constantly evolving - and improving - to match the operational tempo of a radically changing threat environment. For those who provide quartermaster services, this article will briefly examine what this means from the perspective of creating what might be termed a preferred future.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Direct-field acoustic testing of a flight system : logistics, challenges, and results.

Before a spacecraft can be considered for launch, it must first survive environmental testing that simulates the launch environment. Typically, these simulations include vibration testing performed using an electro-dynamic shaker. For some spacecraft however, acoustic excitation may provide a more severe loading environment than base shaker excitation. Because this was the case for a Sandia Flight System, it was necessary to perform an acoustic test prior to launch in order to verify survival due to an acoustic environment. Typically, acoustic tests are performed in acoustic chambers, but because of scheduling, transportation, and cleanliness concerns, this was not possible. Instead, the test was performed as a direct field acoustic test (DFAT). This type of test consists of surrounding a test article with a wall of speakers and controlling the acoustic input using control microphones placed around the test item, with a closed-loop control system. Obtaining the desired acoustic input environment - proto-flight random noise input with an overall sound pressure level (OASPL) of 146.7 dB-with this technique presented a challenge due to several factors. An acoustic profile with this high OASPL had not knowingly been obtained using the DFAT technique prior to this test. In addition, the test was performed in a high-bay, where floor space and existing equipment constrained the speaker circle diameter. And finally, the Flight System had to be tested without contamination of the unit, which required a contamination bag enclosure of the test unit. This paper describes in detail the logistics, challenges, and results encountered while performing a high-OASPL, direct-field acoustic test on a contamination-sensitive Flight System in a high-bay environment.

33 ADVANCED PROPULSION SYSTEMS↗

glmnetLRC f/k/a lrc package: Logistic Regression Classification

Methods for fitting and predicting logistic regression classifiers (LRC) with an arbitrary loss function using elastic net or best subsets. This package adds additional model fitting features to the existing glmnet and bestglm R packages. This package was created to perform the analyses described in Amidan BG, Orton DJ, LaMarche BL, et al. 2014. Signatures for Mass Spectrometry Data Quality. Journal of Proteome Research. 13(4), 2215-2222. It makes the model fitting available in the glmnet and bestglm packages more general by identifying optimal model parameters via cross validation with an customizable loss function. It also identifies the optimal threshold for binary classification.

Source record↗

Case Study: Link Logistics Industrial Solar PV

This case study describes how Link Logistics uses community solar programs and other internal procedures to increase NOI at a warehouse property through leasing roof space for solar installation.

solar, solar PV, photovoltaic, onsite solar, indus↗

Scheduling the Remediation of Port Hope: Logistical and Regulatory Challenges of a Multiple Site Urban Remediation Project - 13119

The Port Hope Project is part of the larger CAN$1.28 billion Port Hope Area Initiative (PHAI), a community-based program for the development and implementation of a safe, local, long-term management solution for historic Low-Level Radioactive Waste (LLRW) in the Municipalities of Port Hope and Clarington, Ontario, Canada. Atomic Energy of Canada (AECL) is the Project Proponent, Public Works and Government Services (PWGSC) is managing the procurement of services and the MMM Group Limited - Conestoga Rovers and Associates Joint Venture (MMM-CRA Joint Venture) is providing detailed design and construction oversight and administration services for the Project. The Port Hope Project includes the construction of a long-term waste management facility (LTWMF) in the Municipality of Port Hope and the remediation of 18 (eighteen) large-scale LLRW, numerous small-scale sites still being identified and industrial sites within the Municipality. The total volume to be remediated is over one million cubic metres and will come from sites that include temporary storage sites, ravines, beaches, parks, private commercial and residential properties and vacant industrial sites all within the urban area of Port Hope. Challenges that will need to be overcome during this 10 year project include: - Requirements stipulated by the Environmental Assessment (EA) that affect Project logistics and schedule. - Coordination of site remediation with the construction schedule at the LTWMF. - Physical constraints on transport routes and at sites affecting production rates. - Despite being an urban undertaking, seasonal constrains for birds and fish (i.e., nesting and spawning seasons). - Municipal considerations. - Site-specific constraints. - Site interdependencies exist requiring consideration in the schedule. Several sites require the use of an adjacent site for staging. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

SHASTA-HELP: Hydrogen Estimator for Logistical Planning Tool

Underground reservoirs offer a promising option for medium- and long-term hydrogen storage that could potentially be safer and more cost-effective than surface alternatives. Currently, there are three underground hydrogen storage (UHS) facilities in the United States, which operate solely in salt caverns and store hydrogen primarily for industrial purposes. Salt formations favorable for geologic storage are geographically limited in the U.S. If a hydrogen economy is to develop, expansion of UHS to other geologic formations such as depleted gas fields and saline aquifers will be necessary to increase the availability of hydrogen storage. While research into the feasibility of storing hydrogen in these formations is ongoing, tools and methodologies are needed for characterizing the hydrogen storage potential in these reservoirs. We introduce the Hydrogen Estimator for Logistical Planning (HELP) tool from the Subsurface Hydrogen Assessment, Storage, and Technology Acceleration (SHASTA) project (https://edx.netl.doe.gov/shasta). SHASTA-HELP is a suite of web-based tools that have numerous capabilities for UHS project planning.

Haeri, Foad↗