Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Development of New Research-Quality Low-Resource Magnetometers for Small Satellites

Researchers from the University of Michigan (UM) and NASA Goddard Spaceflight Center (GSFC) are partnering to develop new types of magnetometers for use on future small satellites. These new instruments not only fulfill stringent requirements for low-amplitude and high-precision measurements, they are also enabling the team to develop a new approach to achieve high-quality magnetic measurements from space, without the need for a boom. Typically, space-based magnetometers are deployed on a boom that extends from the space vehicle to reduce exposure of magnetic noise emanating from the spacecraft, which could potentially contaminate measurements. The UMNASA team has developed algorithms to identify and eliminate spacecraft magnetic noise, which will allow placement of these economical, science-grade instrument magnetometers on and inside the satellite bus, instead of on a boom.

Small Spacecraft↗
DOE OSTI2025

Interplay of Crystal Structure and Magnetic Properties of the Eu 5.08-x Sr x Al 3 Sb 6 Solid Solution

Zintl phases containing rare-earth metals have gained attention due to their magnetic, electronic, and thermoelectric properties. Eu 5.08 Al 3 Sb 6 is a new structure type (monoclinic space group C2/m) that can be described as a pseudorock-salt EuSb motif with the Eu-centered Sb octahedra at the origin of the unit cell, and on the C-face center, containing either Eu (8%) or an Al 4 tetrahedron modeled as a dual tetrahedron (37.5%). The complete solid solution of Eu 5.08–x Sr x Al 3 Sb 6 can be prepared; however, the cation totals vacillate from 5 to 5.24 depending on the Al content. Al K-edge XANES shows a shift to higher energy relative to the Al metal but at slightly lower energy relative to AlSb, indicating an intermediate oxidation state closer to +3 than 0. The lack of an Al K-edge shift with the incorporation of Sr suggests that changes in Sr content do not have a meaningful impact on the electronics of the Al tetrahedra. Investigation of the solid solution structures provides evidence for classifying this structure type as a polar intermetallic phase with variable composition. Magnetization measurements were collected for the solid solution and show complex magnetic ordering with competing ferromagnetic and antiferromagnetic interactions as the Sr content increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Nanorod Pair Complexes Manipulated via Magnetic Casimir Forces

Here, we demonstrate a route to modulate Casmir–Lifshitz interactions between anisotropic nanoparticles and magnetic fluids. By semiclassical quantum electrodynamics, we study ground state dispersion forces for cylindrical dielectric nanorods made of polystyrene (PS) and zinc oxide (ZnO) embedded in toluene-based host media with gold-coated magnetite nanoparticles and also predict magnetic contributions to the fully retarded excited state interaction. The variation in magnetic permeability enables tuning between repulsive and attractive interactions, and measurable magnetic Casimir traps are predicted between a pair of ZnO–PS nanoparticles whose equilibrium position can be modulated over an order of magnitude with a small variation in the size of the magnetite nanoparticle. This provides an alternative magnetic Casimir-effect pathway to reversibly tune quantum electromagnetic forces at the nanoscale for the assembly and enhancement of colloidal stability.

Excited-state interaction↗
DOE OSTI2024

Role of stacking defects on the magnetic behavior of CrCl 3

Here, in the study of van der Waals–layered magnetic materials, the properties of CrCl 3 continue to attract attention. This compound is reported to undergo antiferromagnetic ordering below ~14 K, with a ferromagneticlike region proposed to exist between 14 and 17 K. Ideally, the crystal structure is rhombohedral (R) below ~235 K, separated from a higher-temperature monoclinic (M) phase by a layer-sliding structural phase transition. However, the structural transition is often inhibited even in bulk single crystals, allowing M-type layer stacking, reported to have a 10-fold greater interlayer magnetic coupling than R-type stacking, to be present at low temperature. To clarify the effect of stacking defects on CrCl 3 , we report magnetization measurements on samples of varying crystalline quality. At low applied magnetic field, some crystals predominantly show the T N = 14 K peak, but other crystals show hysteretic behavior and a magnetization enhancement at a slightly higher temperature (14 < T ≲ 17 K.) Samples with anomalous behavior exhibit a transition around ~2 T in isothermal magnetization-field data, evidence that M-type stacking defects are the source of these anomalies. Ground powder samples are especially likely to show strongly anomalous behavior. We suggest that the anomalous behavior arises from few-layer magnetic domains that form just above T N in an environment of mixed interlayer magnetic coupling strength. We argue that the influence of M-type stacking boundaries on sublattice magnetization is already observable in reported neutron scattering data, and may be responsible for an enhancement near 17 K in reported specific heat data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Strategies for mitigating residual magnetic field effect on pre-production PIP-II SSR2 cryomodule performance

This paper outlines the strategy aimed at mitigating the adverse effects of residual magnetic fields on the performance of pre-production SSR2 superconducting cavities within the context of the PIP-II project at Fermilab. Residual magnetic fields can significantly impact cavity performance, leading to reduced quality factor. To address this challenge, our strategy integrates various approaches including magnetic shielding, careful selection of materials, quality controls aimed at measuring magnetic permeability, magnetic hygiene to reduce residual magnetic field at the installation phase. Additionally, experimental studies are being planned to analyze the behavior of the cavities under different magnetic field conditions, and the effectiveness of advanced demagnetization procedures.

43 PARTICLE ACCELERATORS↗
NASA NTRS1979

A low energy electron magnetometer

The concept of a highly sensitive magnetometer based on the deflection of low energy electron beams in magnetic fields is analyzed. Because of its extremely low mass and consequently high e/m ratio, a low energy electron is easily deflected in a magnetic field, thus providing a basis for very low field measurement. Calculations for a specific instrument design indicate that a low energy electron magnetometer (LEEM) can measure magnetic fields as low as 1000 nT. The anticipated performance of LEEM is compared with that of the existing high resolution magnetometers in selected applications. The fast response time of LEEM makes it especially attractive as a potential instrument for magnetic signature analysis in large engineering systems.

Singh, J. J.↗
DOE OSTI2025

Oakridge PPU Magnets: Results and Measurements

The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL) is being upgraded from 1.0 GeV to 1.3 GeV (or 1.4 to 2.8 MW). Several water-cooled magnets have been upgraded to transport 30% higher beam energy. Fermilab contributed the magnet design for the new chicane magnets and injection/extraction septum. Designing the magnets was a challenging task because the new magnets required good combined integrated field quality and needed to occupy the old magnets space but with about 20% greater integrated magnetic field. Additional strong requirements applied to the magnets fringe field so as not to disturb the circulating beam. After fabrication of the magnets, an extensive measurement campaign was developed and performed at Fermilab’s Magnet Test Facility. The measurements needed to assess magnet performance and provide comparison to design calculations. These included verification of field strength and harmonics along an 8 m length and 200 mm good field diameter for the chicane dipoles, end-field Hall probe mapping of these magnets, and measurements along two differently curved trajectories within the ∼3 m septum gradient magnet. Details of the measurements and systems are presented along with results and comparison to field models.

DiMarco, J. [Fermilab] (ORCID:0000000228400036)↗
NASA NTRS1992

Evolution of vector magnetic fields and the August 27 1990 X-3 flare

Vector magnetic fields in an active region of the sun are studied by means of continuous observations of magnetic-field evolution emphasizing magnetic shear build-up. The vector magnetograms are shown to measure magnetic fields correctly based on concurrent observations and a comparison of the transverse field with the H alpha fibril structure. The morphology and velocity pattern are examined, and these data and the shear build-up suggest that the active region's two major footprints are separated by a region with flows, new flux emergence, and several neutral lines. The magnetic shear appears to be caused by the collision and shear motion of two poles of opposite polarities. The transverse field is shown to turn from potential to sheared during the process of flux cancellation, and this effect can be incorporated into existing models of magnetic flux cancellation.

Wang, Haimin↗
NASA NTRS1980

Zeeman observations of W Sgr

A new precise method for measuring magnetic fields on Zeeman plates of the southern Cepheid 'W Sgr' is reviewed. Ten plates over the 7.6(d) period of pulsation show two extrema in the measured values of the effective magnetic field. The method has a precision of + or - 0.4 microns in the Zeeman shift corresponding to + or - 50 Gauss (g). A negative spike of -220 g occurred at the time of arrival of the compressional wave of pulsation at the stellar surface. A positive field of +270 g occurred at the phase of most rapid contraction near the temperature minimum of the pulsation cycle.

Wood, H. J.↗
DOE OSTI2026

Structural, magnetic and electrical transport properties of YMnAl

The intermetallic compound YMnAl, crystallizing in the cubic C-15 (MgCu 2 -type) structure, was prepared using arc-melting and annealing. Rietveld refinement of the XRD pattern yields a lattice parameter of a = 7.816(1) Å⁠. The system exhibits antiferromagnetic order with a transition temperature of approximately 38 K, along with indications of a spin-glass–like phase. The effective magnetic moment, estimated from Curie–Weiss fitting of the susceptibility versus temperature curve, is 6.06 μ B /f.u. and the Curie–Weiss temperature of −79 K confirming the antiferromagnetic nature. Isothermal magnetization measurements below and above the Néel temperature show no saturation, with a maximum magnetization of 0.09 μ B /f.u observed at an applied field of 9 T. The temperature dependence of resistivity exhibits a negative temperature coefficient, characteristic of dirty metals. Hall effect measurements indicate the absence of an anomalous Hall contribution. The Hall coefficient RH, carrier concentration n, and mobility μ estimated from R XY (H) are -1.05×10 -8 m 3 /C, 5.92×10 26 m -3 and 1.05×10 -3 m 2 /V.s, respectively. Our first-principles calculations indicate that YMnAl in the orthorhombic (Imma) structure has the lowest energy; however, the substitutional disorder occurring during experimental synthesis may favor the formation of the cubic Laves phase.

Crystallography↗
DOE OSTI2026

Precise Modeling of a Complex Solenoidal Magnetic Field Using a Combination of Analytic Functions and a PINN

We demonstrate an iterative approach to modeling a sparsely measured magnetic field in a large-bore solenoid. This approach uses a hybrid of traditional and machine learning techniques. The traditional technique is a linear least-squares fit using a series solution to Laplace's equation, while the machine learning technique involves the training of a physics-informed neural network (PINN) on the least-squares fit residuals. We use a newly defined activation function "DELTAsnake," a modification to the snake activation function proposed by Ziyin et al. that allows for stronger curvature and non-monotonicity. The combined model approximately obeys Maxwell's equations to a level sufficient for producing high quality physics simulations and analysis. Our approach is applied to a highly realistic calculation of the expected magnetic field in the Mu2e experiment's Detector Solenoid which includes a simple model for the expected statistical measurement uncertainties. Using ten toy measurement simulations, we demonstrate the capabilities of our model in comparison to the least-squares method alone; the least-squares method alone results in a reduced chi-squared statistic of ${2.15 \pm 0.01}$, while our approach improves the reduced chi-square to ${1.034 \pm 0.005}$. Furthermore, for an average toy simulation, we show that the range of the RMS of the three field component residuals reduces from ${0.07-0.37}$ Gauss to ${0.05-0.07}$ Gauss. We find that this novel method is robust against a realistic systematic uncertainty deriving from Hall probe calibration bias and can be used to significantly reduce the number of measurements required to achieve an accurate model.

Kampa, Cole [Caltech] (ORCID:0000000192972920)↗
NASA NTRS1982

Magsat data availability

It is pointed out that a new era in near-earth magnetic field measurements began with NASA's launch of Magsat in October 1979 into a twilight, sun-synchronous orbit with 96.76 deg inclination, 561-km apogee, and 352-km perigee. A cesium vapor and a fluxgate magnetometer were employed to measure the magnetic field. A measurement of the spacecraft attitude to 20 arcseconds was required to achieve 6 nT (nanotesla) accuracy in the component measurements. This was accomplished with the aid of two star cameras on board the spacecraft and a sun sensor attached to the vector magnetometer. Magsat remained in orbit until June 11, 1980. Magsat has conducted the first truly global geomagnetic survey since the studies performed by the Polar Orbiting Geophysical Observatory (POGO) satellites. A global vector survey was provided of the main geopotential field and lower altitude measurements of crustal anomalies were conducted. Details concerning the availability of these data are discussed.

Langel, R. A.↗
DOE OSTI2025

d -Electron Heavy Fermion Behavior in a Near-Room-Temperature Polar Metallic Ferrimagnet: A Case of Mn 5 SiC

Polycrystalline Mn 5 SiC was synthesized by using a high-temperature solid-state method. Mn 5 SiC adopts a polar space group (Cmc2 1 ) with six crystallographic Mn sites confirmed by X-ray and neutron diffraction, transmission electron microscopy, and second harmonic generation experiments. The complex crystal structure features edge-sharing trigonal prisms and icosahedra, as well as face/edge-sharing pentagonal prisms. Magnetic measurements indicate ferrimagnetic ordering with a transition temperature of 284 K. The ferrimagnetic structure (magnetic space group Cm’c’2 1 ) was further identified by powder neutron diffraction, where collinear Mn spins align along the crystallographic c-axis. The refined magnetic moment for each crystallographic Mn site at 4 K is 1.8(2), −2.42(9), −1.72(8), 0.51(6), 0.50(4), and 1.7(2) μ B . Density functional theory calculations confirm both the metallic behavior and the ferrimagnetic structure observed experimentally and further provide insight into the observed Mn moment dependence across crystallographic sites. The resistivity and specific heat measurements and density functional theory calculations reveal a substantially large Kadowaki–Woods ratio of 5 × 10 –5 μΩ·cm/(mJ/mol) 2 and a many-body renormalization factor of 5.5, indicating the unusual heavy Fermion behavior in such an itinerant magnetic metal.

Messegee, Zachary T. [George Mason University, Fai↗
NASA NTRS1977

Magsat: A satellite for measuring near earth magnetic fields

Magsat, designed for making measurements of the geomagnetic vector field, is evaluated. For accurate vector measurements the attitude of the fluxgate magnetometer will be determined to about 15 arc-seconds. Expected measurement accuracy will be 6 (gamma) in each component and 3 in magnitude. The Magsat data will be applied to solid earth studies including modeling of the Earth's main magnetic field, delineation of regional magnetic anomalies of crustal origin, and interpretation of those anomalies in terms of geologic and geophysical models. An opportunity will be presented to the scientific community to participate in data use investigations.

Langel, R. A.↗
DOE OSTI2026

Compositional Tuning of Magnetic Properties in a Series of Transition Metal Site-Deficient UCo x Bi 2 and UNi x Bi 2 Phases

Varying the electronic structure of topological materials through aliovalent substitution is a primary approach to tuning their physical properties. Unlike substitution, metal site deficiency intrinsic to some structure types, including HfCuSi 2 -type, has rarely been employed for controlling the properties of topological phases. In this report, we describe the synthesis and characterization of two new series of compounds, UCoxBi 2 and UNixBi 2 , which demonstrate the variation of transition metal content through synthetic conditions. Magnetic measurements reveal the dependence between the extent of transition metal incorporation and the magnetism of the resulting phase. DFT calculations demonstrated the ability to model their formation and predict the stability ranges of transition metal-site deficient compounds.

Crystal structure↗
NASA NTRS1991

Makeup and uses of a basic magnet laboratory for characterizing high-temperature permanent magnets

A set of instrumentation for making basic magnetic measurements was assembled in order to characterize high intrinsic coercivity, rare earth permanent magnets with respect to short term demagnetization resistance and long term aging at temperatures up to 300 C. The major specialized components of this set consist of a 13 T peak field, capacitor discharge pulse magnetizer; a 10 in. pole size, variable gap electromagnet; a temperature controlled oven equipped with iron cobalt pole piece extensions and a removable paddle that carries the magnetization and field sensing coils; associated electronic integrators; and sensor standards for field intensity H and magnetic moment M calibration. A 1 cm cubic magnet sample, carried by the paddle, fits snugly between the pole piece extensions within the electrically heated aluminum oven, where fields up to 3.2 T can be applied by the electromagnet at temperatures up to 300 C. A sample set of demagnetization data for the high energy Sm2Co17 type of magnet is given for temperatures up to 300 C. These data are reduced to the temperature dependence of the M-H knee field and of the field for a given magnetic induction swing, and they are interpreted to show the limits of safe operation.

Niedra, Janis M.↗
NASA NTRS2012

C/NOFS Measurements of Stormtime Magnetic Perturbations in the Low-latitude Ionosphere

The Vector Electric Field Investigation suite on the C/NOFS satellite includes a fluxgate magnetometer to monitor the Earth's magnetic fields in the low-latitude ionosphere. Measurements yield full magnetic vectors every second over the range of +/- 45,000 nT with a one-bit resolution of 1.37 nT (16 bit AID) in each component. The sensor's primary responsibility is to support calculations of both VxB and ExB with greater accuracy than can be obtained using standard magnetic field models. The data also contain information about large-scale current systems, that, when analyzed in conjunction with electric field measurements, promise to significantly expand understanding of equatorial electrodynamics. We first compare in situ measurements with the POMME (POtsdam Magnetic Model of the Earth) model to establish in-flight sensor "calibrations" and to compute magnetic residuals. At low latitudes the residuals are predominately products of the stormtime ring current. Since C/NOFS provides a complete coverage of all local times every 97 minutes, magnetic field data allow studies of the temporal evolution and local-time variations of stormtime ring current. The analysis demonstrates the feasibility of using instrumented spacecraft in low-inclination orbits to extract a timely proxy for the provisional Dst index and to specify the ring current's evolution.

Le, Guan↗