Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC MIRRORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Emittance of short-pulsed high-current ion beams formed from the plasma of the electron cyclotron resonance discharge sustained by high-power millimeter-wave gyrotron radiation

We present experimental results on measuring the emittance of short-pulsed (≤100 μs) high-current (80–100 mA) ion beams of heavy gases (Nitrogen, Argon) formed from a dense plasma of an ECR source of multiply charged ions (MCI) with quasi-gas-dynamic mode of plasma confinement in a magnetic trap of simple mirror configuration. The discharge was created by a high-power (90 kW) pulsed radiation of a 37.5-GHz gyrotron. The normalized emittance of generated ion beams of 100 mA current was (1.2–1.3) π mm mrad (70% of ions in the beams). Comparing these results with those obtained using a cusp magnetic trap, it was concluded that the structure of the trap magnetic field lines does not exert a decisive influence on the emittance of ion beams in the gas-dynamic ECR source of MCI.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Effect of the Polarization Characteristics of Probe Light on the Signal of Optically Detected Magnetic Resonance in Magnetometric and Gyroscopic Quantum Sensors

We consider the effect of the polarization characteristics of probe light on the signal of optically detected magnetic resonance in quantum sensors, including quantum magnetometers based on the phenomenon of electron paramagnetic resonance and quantum gyroscopes employing both the electron and nuclear magnetic resonance. Relationships between the magnetic resonance signal magnitude and parameters of the optical system elements, which are based on the Stokes–Mueller formalism, are derived and verified. It is found that the main destructive influence in the signal in a standard two-beam scheme is produced by phase delays introduced by both metallic and dielectric mirrors. Methods for compensation of this destructive influence are proposed and verified.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design of a new electron cyclotron resonance ion source at Oshima National College of Maritime Technology

A new electron cyclotron resonance ion/plasma source has been designed and will be built at Oshima National College of Maritime Technology by early 2014. We have developed an ion source that allows the control of the plasma parameters over a wide range of electron temperatures for material research. A minimum-B magnetic field composed of axial mirror fields and radial cusp fields was designed using mainly Nd-Fe-B permanent magnets. The axial magnetic field can be varied by three solenoid coils. The apparatus has 2.45 GHz magnetron and 2.5–6.0 GHz solid-state microwave sources.

43 PARTICLE ACCELERATORS↗

Doubly-magic nature of {sup 56}Ni: Measurement of the ground state nuclear magnetic dipole moment of {sup 55}Ni

The nuclear magnetic moment of the ground state of {sup 55}Ni (I{sup {pi}}=3/2{sup -}, T{sub 1/2}=204 ms) has been deduced to be |{mu}({sup 55}Ni)|=(0.976{+-}0.026) {mu}{sub N} using the {beta}-ray detecting nuclear magnetic resonance technique. Results of a shell model calculation in the full fp shell model space with the GXPF1 interaction reproduce the experimental value. Together with the known magnetic moment of the mirror partner {sup 55}Co, the isoscalar spin expectation value was extracted as <{sigma}{sigma}{sub z}>=0.91{+-}0.07. The <{sigma}{sigma}{sub z}> shows a trend similar to that established in the sd shell. The present theoretical interpretations of both {mu}({sup 55}Ni) and <{sigma}{sigma}{sub z}> for the T=1/2, A=55 mirror partners support the softness of the {sup 56}Ni core.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

ATTENUATION OF CORONAL MAGNETIC FIELDS IN SOLAR MICROWAVE BURSTS

Based on the observed data by the Nobeyama Radio Observatory and the nonthermal gyrosynchrotron theory, the calculated magnetic field in a loop-like radio source of the 2001 October 23 flare attenuates from hundreds to tens of Gauss, except in the region with very weak magnetic fields. Meanwhile, the viewing angle between the magnetic field and line of sight has a similar attenuation from tens to around ten degrees, implying that the transverse magnetic component attenuates much faster than the longitudinal one. All of these results can be understood by the magnetic energy release process in solar flares. Moreover, the column density of nonthermal electrons decreases from 10{sup 9−10} to 10{sup 7−8} cm{sup −2} during the flare, except in the region with very weak magnetic fields, where its value is larger than that with strong magnetic fields due to the mirroring effect. The calculated error and harmonic number of gyrofrequency better suit the region with strong magnetic fields.

79 ASTRONOMY AND ASTROPHYSICS↗

Multi-channel Doppler backscattering measurements in the C-2 field reversed configuration

A versatile heterodyne Doppler Backscattering (DBS) system is used to measure density fluctuation levels (in the wavenumber range kρ{sub s} ≤ 50), and the toroidal E × B flow velocity in the C-2 Field-Reversed Configuration (FRC). Six tunable frequencies in three waveguide bands (26 GHz ≤ f ≤ 90 GHz) are launched using monostatic beam optics, via a quasi-optical beam combiner/polarizer and an adjustable parabolic focusing mirror (inside the vacuum enclosure) achieving Gaussian beam spot sizes of 3–5.5 cm at the X/O-mode cutoff. The DBS system covers plasma densities of 0.8 × 10{sup 13} ≤ n{sub e} ≤ 1 × 10{sup 14} cm{sup −3}, and provides access to the FRC core (up to the field null) and across the FRC separatrix into the scrape-off layer plasma.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electromagnetic Moments of Proton-Rich {sup 28}P and Decomposition of Its Spin

The magnetic moment of {sup 28}P(Ipi = 3{sup +}, T{sub 1/2} = 270.3 ms) has been measured precisely by means of beta-NMR technique. The obtained magnetic moment is |mu({sup 28}P)| = 0.3115 (34) mu{sub N}. Combined with the magnetic moment of its mirror partner {sup 28}Al, the nuclear spin I = 3 is decomposed into its 4 components. The measurement of the Q moment has also been tried. From the preliminary NQR spectrum, it was found that the quadrupole coupling constant eqQ/h may be slightly larger than the prediction, which may show enhancement of the Q moment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Drift-resistive-inertial ballooning modes in quasihelical stellarators

A linear stability theory of nonideal magnetohydrodynamic (MHD) ballooning modes is investigated using a two fluid model for electron-ion plasmas. Drift-resistive-inertial ballooning mode eigenvalues and eigenfunctions are calculated for a variety of equilibria including axisymmetric shifted circular geometry (s-alpha model) as well as for three dimensional configurations relevant for the Helically Symmetric Stellarator (HSX) [F. S. B. Anderson, A. F. Almagri, D. T. Anderson, et al., Fusion Technology 27, 273 (1995)]. For typical HSX parameters, characteristic ballooning mode growth rates exceed the electron collision frequency. In this regime, electron inertial effects dominate plasma resistivity and produce an instability whose growth rate scales with the electromagnetic skin depth. However, as plasma beta is increased, the resistive and inertial effects become unimportant. Under these conditions, the mode is completely stabilized by drift frequency effects, which dominate resistivity and inertia. Numerical results indicate that in the absence of drift effects, the resistive-inertial MHD modes are purely growing and persist in regimes where ideal MHD ballooning modes are stable. It is found that the magnitudes of the linear growth rates are not sensitive to the addition of a mirror term to the magnetic spectrum that spoils the quasihelical symmetry of the configuration. The eigenvalues and eigenvectors in the strong ballooning approximation are used together with a quasilinear mixing length estimate to determine particle flux and particle diffusivity. The particle diffusivity increases with rising density gradient and collisionality in a plasma with a low electron temperature. This increase in transport is consistent with the increase observed in the edge region of HSX plasmas. The magnitude of the particle diffusivity is computed to be in the range from 5 to 10 m{sup 2}/s, which is consistent with the experimental measured particle diffusivity at the edge of HSX plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

First experiments with gasdynamic ion source in CW mode

A new type of ECR ion source—a gasdynamic ECR ion source—has been recently developed at the Institute of Applied Physics. The main advantages of such device are extremely high ion beam current with a current density up to 600–700 emA/cm{sup 2} in combination with low emittance, i.e., normalized RMS emittance below 0.1 π mm mrad. Previous investigations were carried out in pulsed operation with 37.5 or 75 GHz gyrotron radiation with power up to 100 kW at SMIS 37 experimental facility. The present work demonstrates the first experience of operating the gasdynamic ECR ion source in CW mode. A test bench of SMIS 24 facility has been developed at IAP RAS. 24 GHz radiation of CW gyrotron was used for plasma heating in a magnetic trap with simple mirror configuration. Initial studies of plasma parameters were performed. Ion beams with pulsed and CW high voltage were successfully extracted from the CW discharge. Obtained experimental results demonstrate that all advantages of the gasdynamic source can be realized also in CW operation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

PREFERENTIAL ACCELERATION AND PERPENDICULAR HEATING OF MINOR IONS IN A COLLISIONLESS CORONAL HOLE

We incorporate the cyclotron-resonant Fermi heating mechanism of Isenberg and Vasquez into an inhomogeneous, collisionless coronal hole model to investigate this kinetic process in the presence of the other known forces on the coronal hole minor ions. The model includes the effects of gravity, charge-separation electric field, and mirroring in the decreasing magnetic field of a super-radially expanding flux tube. The Fermi process, due to the existence of multiple cyclotron resonances for minor ions, acts preferentially since it is not available to thermal protons in the low-beta coronal hole. The minor ions are treated as test particles, and we consider the specific case of O{sup 5+}, which is the principal minor ion observed by the UVCS/Solar and Heliospheric Observatory instrument. We estimate an upper limit to the nonlinearly generated resonant wave power by extrapolating from the observed low-frequency fluctuations, and find that only a small fraction of this power is required to provide the observed minor ion energization. The perpendicular heating provided by this Fermi mechanism accelerates the entire minor ion distribution to high speed with respect to the bulk protons, consistent with the differentially streaming minor ion core distributions which are a distinctive property of the in situ fast solar wind. We conclude that this cyclotron-resonant Fermi process is easily capable of providing the observed preferential acceleration and heating of minor ions in the fast solar wind.

99 GENERAL AND MISCELLANEOUS↗

BXS Re-calibration

Early in the commissioning it was noticed by Cecile Limborg that the calibration of the BXS spectrometer magnet seemed to be different from the strength of the BX01/BX02 magnets. First the BX01/BX02 currents were adjusted to 135 MeV and the beam energy was adjusted to make the horizontal orbit flat. Then BX01/BX02 magnets were switched off and BXS was adjusted to make the horizontal orbit in the spectrometer line flat, without changing the energy of the beam. The result was that about 140-141 MeV were required on the BXS magnet. This measurement was repeated several times by others with the same results. It was not clear what was causing the error: magnet strength or layout. A position error of about 19 mm of the BXS magnet could explain the difference. Because there was a significant misalignment of the vacuum chamber in the BXS line, the alignment of the whole spectrometer line was checked. The vacuum chamber was corrected, but the magnets were found to be in the proper alignment. So we were left with one (or conceivably two) magnet calibration errors. Because BXS is a wedged shaped magnet, the bend angle depends on the horizontal position of the incoming beam. As mentioned, an offset of the beam position of 19 mm would increase or decrease the bend angle roughly by the ratio of 135/141. The figure of 19 mm is special and caused a considerable confusion during the design and measurement of the BXS magnet. This is best illustrated in Figure 1 which was taken out of the BXS Traveler document. The distance between the horizontal midplanes of the poles and the apex of the beam path was chosen to be 19 mm so the beam is close to the good field region throughout its entire path. Thus it seemed possible that there was an error that resulted in the beam not being on this trajectory, or conversely, that the magnetic measurements were done on the wrong trajectory and the magnet was then mis-calibrated. Mechanical measurements of the vacuum chamber made in the tunnel indicated that the vacuum chamber was in fact in the proper position with respect to the magnet - not 19 mm off to one side - so the former possibility was discounted. Review of the Fiducial Report and an interview with Keith Caban convinced me that there was no error in the coordinate system used for magnet measurements. I went and interviewed Andrew Fischer who did the magnetic measurements of BXS. He had extensive records, including photographs of the setups and could quickly answer quite detailed questions about how the measurement was done. Before the interview, I had a suspicion there might have been a sign flip in the x coordinate which because of the wedge would result in the wrong path length and a miscalibration. Andrew was able to pin-point how this could have happened and later confirmed it by looking an measurement data from the BXG magnet done just after BXS and comparing photographs. It turned out that the sign of the horizontal stage travel that drives the measurement wire was opposite that of the x coordinate in the Traveler, and the sign difference wasn't applied to the data. The origin x = 0 was set up correctly, but the wire moved in the opposite direction to what was expected, just as if the arc had been flipped over about the origin. To quantitatively confirm that this was the cause of the observed difference in calibration I used the 'grid data', which was taken with a Hall probe on the BXS magnet originally to measure the FINT (focusing effect) term, and combined it with the Hall probe data taken on the flipped trajectory, and performed the field integral on a path that should give the same result as the design path. This is best illustrated in Figure 2. The integration path is coincident with the desired path from the pivot points (x = 0) outward. Between the pivot points the integration path is a mirror image of the design path, but because the magnet is fairly uniform, for this portion it gives the same result. Most of the calibration error resulted simply from the different path length between the design path and the measured path. The results of the integration on the equivalent path are given in Table 1. The corrected calibration has been used to generate a new polynomial for BXS which was implemented in the control system.

43 PARTICLE ACCELERATORS↗

The effect of spectral anisotropy of fast magnetosonic turbulence on the plasma heating at the proton kinetic scales

The energy transport associated with the fast magnetosonic turbulence in a low-beta plasma is one of the possible driving forces of the solar wind. Two different kinds of the turbulence spectra are discussed in this paper: a unidirectional spectrum of the fluctuations propagating away from the sun and a bidirectional spectrum composed of the sunward and antisunward modes. The evolution of the system is analyzed with the help of hybrid numerical simulations at the proton kinetic scales. It is shown that in the unidirectional case, the heating is always preferentially across the background magnetic field. It is this property that allows the solar wind plasma to be propelled away from the sun by the mirror force of the inhomogeneous magnetic field. Adding the counterpropagating modes reverses the sense of the energy deposition with the parallel heating now dominating the process. However, the parallel heating is produced mostly by fast modes propagating along the magnetic field. If these modes are eliminated, the heating becomes perpendicular again.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design and fabrication of a superconducting magnet for an 18 GHz electron cyclotron resonance ion/photon source NFRI-ECRIPS

A superconducting magnet was designed and fabricated for an 18 GHz ECR ion/photon source, which will be installed at National Fusion Research Institute (NFRI) in South Korea. The magnetic system consists of a set of four superconducting coils for axial mirror field and 36 pieces of permanent magnets for hexapolar field. The superconducting coils with a cryocooler (1.5 W - 4.2 K) allow one to reach peak mirror fields of 2.2 T in the injection and those of 1.5 T in the extraction regions on the source axis, and the resultant hexapolar field gives 1.35 T on the plasma chamber wall. The unbalanced magnetic force between the coils and surrounding yoke has been minimized to 16 ton by a coil arrangement and their electrical connection, and then was successfully suspended by 12 strong thermal insulating supports made of large numbers of carbon fibers. In order to block radiative thermal losses, multilayer thermal insulations are covered on the coil windings as well as 40-K aluminum thermal shield. Also new schemes of quench detection and safety system (coil divisions, quench detection coils, and heaters) were employed. For impregnation of the windings a special epoxy has been selected and treated to have a higher breaking strength and a higher thermal conductivity, which enables the superconductors to be uniformly and rapidly cooled down or heated during a quench.

43 PARTICLE ACCELERATORS↗

Machine Protection System for the Stepper Motor Actuated SyLMAND Mirrors

SyLMAND, the Synchrotron Laboratory for Micro and Nano Devices at the Canadian Light Source, consists of a dedicated X-ray lithography beamline on a bend magnet port, and process support laboratories in a clean room environment. The beamline includes a double mirror system with flat, chromium-coated silicon mirrors operated at varying grazing angles of incidence (4 mrad to 45 mrad) for spectral adjustment by high energy cut-off. Each mirror can be independently moved by two stepper motors to precisely control the pitch and vertical position. We present in this paper the machine protection system implemented in the double mirror system to allow for safe operation of the two mirrors and to avoid consequences of potential stepper motor malfunction.

43 PARTICLE ACCELERATORS↗

Applying alpha-channeling to mirror machines

The {alpha}-channeling effect entails the use of radio-frequency waves to expel and cool high-energetic {alpha} particles born in a fusion reactor; the device reactivity can then be increased even further by redirecting the extracted energy to fuel ions. Originally proposed for tokamaks, this technique has also been shown to benefit open-ended fusion devices. Here, the fundamental theory and practical aspects of {alpha} channeling in mirror machines are reviewed, including the influence of magnetic field inhomogeneity and the effect of a finite wave region on the {alpha}-channeling mechanism. For practical implementation of the {alpha}-channeling effect in mirror geometry, suitable contained weakly damped modes are identified. In addition, the parameter space of candidate waves for implementing the {alpha}-channeling effect can be significantly extended through the introduction of a suitable minority ion species that has the catalytic effect of moderating the transfer of power from the {alpha}-channeling wave to the fuel ions.

36 MATERIALS SCIENCE↗

MHD plasma stabilization in a chain of axisymmetric adiabatic open mirror cells

Conditions for convective plasma instability in a chain of axisymmetric adiabatic mirror cells with different signs of magnetic field curvature are analyzed. The boundaries of the region that can be occupied by a stable hollow plasma in a system of two connected cells-a nonparaxial simple mirror cell and a semicusp-are determined, as well as the interval of allowed values of the ratio between the pressures in the cells. Because of the large magnetic field curvature in the component cells, the safety factor that is achieved at both-external and internal-plasma boundaries in accordance with the average min-B principle can be high. It is assumed that the unperturbed pressure in each cell is almost isotropic, in which case the mirror ratio should necessarily be large. A key role in the stability of the plasma is played by its compressibility. A comparison is made between the conditions for complete plasma stabilization against arbitrary perturbations and the conditions for stability of individual cells against the global mode. The stability of the cells against the global mode is sufficient, but not necessary, for stabilizing the chain. The analysis is done by using orthogonal coordinates associated with the unperturbed magnetic field (flux variables). Numerical simulations were carried out for nonparaxial cells from a certain three-parameter family.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma heating and hot ion sustaining in mirror based hybrids

Possibilities of plasma heating and sloshing ion sustaining in mirror based hybrids are briefly reviewed. Sloshing ions, i.e. energetic ions with a velocity distribution concentrated to a certain pitch-angle, play an important role in plasma confinement and generation of fusion neutrons in mirror machines. Neutral beam injection (NBI) is first discussed as a method to generate sloshing ions. Numerical results of NBI modeling for a stellarator-mirror hybrid are analyzed. The sloshing ions could alternatively be sustained by RF heating. Fast wave heating schemes, i.e. magnetic beach, minority and second harmonic heating, are addressed and their similarities and differences are described. Characteristic features of wave propagation in mirror hybrid devices including both fundamental harmonic minority and second harmonic heating are examined. Minority heating is efficient for a wide range of minority concentration and plasma densities; it allows one to place the antenna aside from the hot ion location. A simple-design strap antenna suitable for this has good performance. However, this scenario is appropriate only for light minority ions. The second harmonic heating can be applied for the heavy ion component. Arrangements are similar for minority and second harmonic heating. The efficiency of second harmonic heating is influenced by a weaker wave damping than for minority heating. Numerical calculations show that in a hybrid reactor scaled mirror machine the deuterium sloshing ions could be heated within the minority heating scheme, while the tritium ions could be sustained by second harmonic heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗