Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETISM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Single crystal neutron and magnetic measurements of Rb 2 Mn 3 (VO 4 ) 2 CO 3 and K 2 Co 3 (VO 4 ) 2 CO 3 with mixed honeycomb and triangular magnetic lattices

Two new alkali vanadate carbonates with divalent transition metals have been synthesized as large single crystals via a high-temperature (600 °C) hydrothermal technique. Compound I, Rb 2 Mn 3 (VO 4 ) 2 CO 3 , crystallizes in the trigonal crystal system in the space group P[3 with combining macron]1c, and compound II, K 2 Co 3 (VO 4 ) 2 CO 3 , crystallizes in the hexagonal space group P6 3 /m. Both structures contain honeycomb layers and triangular lattices made from edge-sharing MO 6 octahedra and MO 5 trigonal bipyramids, respectively. The honeycomb and triangular layers are connected along the c-axis through tetrahedral [VO 4 ] groups. The MO 5 units are connected with each other by carbonate groups in the ab-plane by forming a triangular magnetic lattice. The difference in space groups between I and II was also investigated with Density Functional Theory (DFT) calculations. Single crystal magnetic characterization of I indicates three magnetic transitions at 77 K, 2.3 K, and 1.5 K. The corresponding magnetic structures for each magnetic transition of I were determined using single crystal neutron diffraction. At 77 K the compound orders in the MnO 6 -honeycomb layer in a Néel-type antiferromagnetic orientation while the MnO 5 triangular lattice ordered below 2.3 K in a colinear ‘up–up–down’ fashion, followed by a planar ‘Y’ type magnetic structure. K 2 Co 3 (VO 4 ) 2 CO 3 (II) exhibits a canted antiferromagnetic ordering below T N = 8 K. Here, the Curie–Weiss fit (200–350 K) gives a Curie–Weiss temperature of –42 K suggesting a dominant antiferromagnetic coupling in the Co 2+ magnetic sublattices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Coherent magnetic nanoinclusions induce charge localization in half-Heusler alloys leading to high- T c ferromagnetism and enhanced thermoelectric performance

Performance improvement traditionally realized through a combination of power factor optimization via electronic doping and lattice thermal conductivity reduction using nanostructuring have reached their optimal limits in many leading thermoelectric materials, making further enhancement in the thermoelectric figure of merit extremely challenging. Here, a novel approach to electronic transport engineering using coherent magnetic nanoinclusions is demonstrated. It was found that the incorporation of coherent magnetic full-Heusler (FH) nanoinclusions (Ti(Ni 4/3 Fe 2/3 )Sn) into a half-Heusler (HH) matrix (Ti 0.25 Zr 0.25 Hf 0.5 NiSn 0.975 Sb 0.025 ) with optimal doping level and lattice thermal conductivity leads to high Curie temperature ferromagnetism (T c ~ 650 K) along with a large reduction in the effective carrier density within the HH matrix. It is believed that the embedded magnetic FH nanoinclusions interact with the spin of itinerant carriers, leading to charge localization and the formation of overlapping bound magnetic polarons (BMPs). This gives rise to significant enhancements of both carrier mobility and thermopower, which minimizes the reduction in the overall power factor, simultaneously with a large drop in the total thermal conductivity owing to the reduction of the electronic contribution to the thermal conductivity. Here, whe implementation of the magnetic nanoinclusions strategy in a variety of state-of-the-art thermoelectric materials could pave the way towards even larger figures of merit.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Magnetic vortex nucleation modes in static magnetic fields

The magnetic vortex nucleation process in nanometer- and micrometer-sized magnetic disks undergoes several phases with distinct spin configurations called the nucleation states. Before formation of the final vortex state, small submicron disks typically proceed through the so-called C-state while the larger micron-sized disks proceed through the more complicated vortex-pair state or the buckling state. This work classifies the nucleation states using micromagnetic simulations and provides evidence for the stability of vortex-pair and buckling states in static magnetic fields using magnetic imaging techniques and electrical transport measurements. Lorentz Transmission Electron Microscopy and Magnetic Transmission X-ray Microscopy are employed to reveal the details of spin configuration in each of the nucleation states. We further show that it is possible to unambiguously identify these states by electrical measurements via the anisotropic magnetoresistance effect. Combination of the electrical transport and magnetic imaging techniques confirms stability of a vortex-antivortex-vortex spin configuration which emerges from the buckling state in static magnetic fields.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2018

Megagauss-level magnetic field production in cm-scale auto-magnetizing helical liners pulsed to 500 kA in 125 ns

We present Auto-magnetizing (AutoMag) liners [Slutz et al., Phys. Plasmas 24, 012704 (2017)] are designed to generate up to 100 T of axial magnetic field in the fuel for Magnetized Liner Inertial Fusion [Slutz et al., Phys. Plasmas 17, 056303 (2010)] without the need for external field coils. AutoMag liners (cylindrical tubes) are composed of discrete metallic helical conduction paths separated by electrically insulating material. Initially, helical current in the AutoMag liner produces internal axial magnetic field during a long (100 to 300 ns) current prepulse with an average current rise rate dI/dt=5 kA/ns. After the cold fuel is magnetized, a rapidly rising current (200 kA/ns) generates a calculated electric field of 64 MV/m between the helices. Such field is sufficient to force dielectric breakdown of the insulating material after which liner current is reoriented from helical to predominantly axial which ceases the AutoMag axial magnetic field production mechanism and the z-pinch liner implodes. Proof of concept experiments have been executed on the Mykonos linear transformer driver to measure the axial field produced by a variety of AutoMag liners and to evaluate what physical processes drive dielectric breakdown. Lastly, a range of field strengths have been generated in various cm-scale liners in agreement with magnetic transient simulations including a measured field above 90 T at I = 350 kA. By varying the helical pitch angle, insulator material, and insulator geometry, favorable liner designs have been identified for which breakdown occurs under predictable and reproducible field conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Tunnel diode resonator for precision magnetic susceptibility measurements in a mK temperature range and large DC magnetic fields

Precision radio-frequency measurements of the magnetic susceptibility using the tunnel diode resonator (TDR) technique are used to study the delicate effects in magnetic and superconducting materials. High resolution (in ppb range) measurements are particularly important for studies of the London and Campbell penetration depths in a superconductor and for the investigation of magnetic transitions in (anti)ferromagnets. Due to the small rf magnetic-excitation in a mOe range, the TDR is especially useful at low-temperatures in a mK range, if Joule heating generated in the TDR circuitry is efficiently removed and the circuit is stabilized with sub-mK precision. Unfortunately, the circuit has significant magnetic field dependence, and therefore, most of the precision TDR measurements at low-temperatures were conducted in zero magnetic field. In this work, we describe the design of a setup for precision TDR measurements in a dilution refrigerator down to ~40 mK with a 14 T superconducting magnet. The key features of our design are the separated electronics components and the placement of the most field sensitive parts in the field-compensated zone far from the center of solenoid as well as the heat-sinking at a higher temperature stage. As a result, the performance of the working setup is demonstrated using several superconductors.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Rethinking the magnetic properties of lepidocrocite: A density functional theory and cluster expansion study

The iron oxyhydroxide lepidocrocite (g-FeOOH) is an abundant mineral critical to a number of chemical and technological applications. Of particular interest is the ground state and nite temperature magnetic order, and the subsequent impact this has upon crystal properties. The magnetic properties, investigated in this work are governed primarily through superexchange interactions, and have been calculated using density functional theory and cluster expansion methods. Quantication of these exchange terms has facilitated the determination of the ground state magneto-crystalline structure and subsequent calculation of its lattice constants, elastic moduli, cohesive enthalpy, and electronic density of states. Further, using a collinear magnetic conguration model, the magnetic heat capacity versus temperature has been studied and the Neel temperature obtained.

Pope, Daniel J.↗
DOE OSTI2023

Performance of low-loss demountable joints between CORC ® cable-in-conduit-conductors at magnetic fields up to 8 T developed for fusion magnets

Abstract High-temperature superconductors (HTS) are promising candidates for use in the high-field magnets needed in particle accelerators and fusion reactors. HTS conductor on round core (CORC ® ) cables and wires wound from ReBa 2 Cu 3 O 7- x (REBCO) coated tapes are being developed for use in high-field magnet applications including fusion magnets operating at currents beyond 80 kA, requiring them to be bundled into cable-in-conduit conductor (CICC) configurations. The use of HTS cables enable demountable superconducting fusion magnets that would allow easier access to the fusion machine for maintenance and parts replacement. Such demountable magnets require practical, low-resistance joints, capable of injecting current uniformly into the many REBCO tapes that make up different cable designs. Optimization steps on CORC ® cables have resulted in high-current terminations and joints with a joint resistance measured between a pair of 30-tape CORC ® cables of 51 nΩ at 76 K and 1.9 nΩ at 4 K. Demountable joints between CICCs consisting of six CORC ® cables arranged in flat and round configurations were also tested and compared to joints between low-temperature superconducting (LTS) CICCs consisting of NbTi Rutherford cables. Samples were paired into two configurations (LTS-to-LTS and HTS-to-HTS) with a demountable joint between them that were each tested in series with currents up to 10 000 A in an applied background magnetic field of up to 8 T. The total loop resistance of the HTS-to-HTS sample, including their terminations and joint, was about 4 nΩ at 4 K in self-field with the resistance of the copper pressed joint being less than 1 nΩ. At 8 T, the total loop resistance increased to 6.9 nΩ with the pressed joint contributing 1.4 nΩ. These initial tests prove the feasibility of producing remountable (dry) joints with low resistance between superconducting magnet windings in future compact fusion machines.

Physics↗
DOE OSTI2018

Tuning the Magnetic Properties and Structural Stabilities of the 2-17-3 Magnets Sm 2 Fe 17 X 3 (X=C, N) by Substituting La or Ce for Sm

Designing a permanent magnet with reduced critical rare-earth content is of paramount importance in the development of cost-effective modern technologies. By performing comprehensive first-principles calculations, we investigate the potential avenues for reducing the critical rare-earth content in Sm 2 Fe 17 N 3 and Sm 2 Fe 17 C 3 by making a La or Ce substitution for Sm. The calculated magnetic properties of base compounds are in good agreement with the previous low-temperature (4.2-K) experimental measurements, and they show a large axial anisotropy. Although La or Ce substitution results in a slight reduction of magnetic anisotropy, the magnetic moments of Fe atoms mostly remain unchanged. Specifically, large axial anisotropies of 7.2 and 4.1 MJ/m 3 are obtained for SmCeFe 17 N 3 and SmLaFe 17 N 3 , respectively. These values of anisotropies are comparable to the state-of-the-art permanent magnet Nd 2 Fe 14 B. The foremost limitation of Sm 2 Fe 17 X 3 magnets for practical application is the formation nitrogen or carbon vacancies at high temperatures. By calculating the N- (C)- vacancy formation energy, we show that La or Ce substitution enhances the vacancy formation energy. Here, this enhanced vacancy formation energy will likely improve the thermodynamic stability of these alloys at high temperatures. Therefore, La- or Ce-substituted Sm 2 Fe 17 C 3 and Sm 2 Fe 17 N 3 compounds are promising candidates for high-performance permanent magnets with substantially reduced rare-earth content.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Controlling magnetic order, magnetic anisotropy, and band topology in the semimetals Sr(Mn 0.9 Cu 0.1 )Sb 2 and Sr(Mn 0.9 Zn 0.1 )Sb 2

Neutron diffraction and magnetic susceptibility studies show that orthorhombic single-crystals of topological semimetals Sr(Mn 0.9 Cu 0.1 ) Sb 2 and Sr(Mn 0.9 Zn 0.1 )Sb 2 undergo three-dimensional C-type antiferromagnetic (AFM) ordering of the Mn 2+ moments at T N = 200 ± 10 and 210 ± 12 K, respectively, significantly lower than that of the parent SrMnSb 2 with T N = 297 ± 3 K. Magnetization versus applied magnetic field (perpendicular to MnSb planes) below T N exhibits slightly modified de Haas van Alphen oscillations for the Zn-doped crystal as compared to that of the parent compound. By contrast, the Cu-doped system does not show de Haas van Alphen magnetic oscillations, suggesting that either Cu substitution for Mn changes the electronic structure of the parent compound substantially, or that the Cu sites are strong scatterers of carriers that significantly shorten their mean free path thus diminishing the oscillations. Density functional theory (DFT) calculations including spin-orbit coupling predict the C-type AFM state for the parent, Cu-, and Zn-doped systems and identify the a -axis (i.e., perpendicular to the Mn layer) as the easy magnetization direction in the parent and 12.5% of Cu or Zn substitutions. In contrast, 25% of Cu content changes the easy magnetization to the b-axis (i.e., within the Mn layer). Here, we find that the incorporation of Cu and Zn in SrMnSb 2 tunes electronic bands near the Fermi level resulting in different band topology and semimetallicity. The parent and Zn-doped systems have coexistence of electron and hole pockets with opened Dirac cone around the Y-point whereas the Cu-doped system has dominant hole pockets around the Fermi level with a distorted Dirac cone. The tunable electronic structure may point out possibilities of rationalizing the experimentally observed de Haas van Alphen magnetic oscillations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Prediction of a magnetic Weyl semimetal without spin-orbit coupling and strong anomalous Hall effect in the Heusler compensated ferrimagnet Ti 2 MnAl

We predict a magnetic Weyl semimetal in the inverse Heusler Ti 2 MnAl, a compensated ferrimagnet with a vanishing net magnetic moment and a Curie temperature of over 650 K. Despite the vanishing net magnetic moment, we calculate a large intrinsic anomalous Hall effect (AHE) of about 300 S/cm. It derives from the Berry curvature distribution of the Weyl points, which are only 14 meV away from the Fermi level and isolated from trivial bands. Different from antiferromagnets Mn 3 X (X=Ge, Sn, Ga, Ir, Rh, and Pt), where the AHE originates from the noncollinear magnetic structure, the AHE in Ti 2 MnAl stems directly from the Weyl points and is topologically protected. The large anomalous Hall conductivity (AHC) together with a low charge carrier concentration should give rise to a large anomalous Hall angle. In contrast to the Co-based ferromagnetic Heusler compounds, the Weyl nodes in Ti 2 MnAl do not derive from nodal lines due to the lack of mirror symmetries in the inverse Heusler structure. Since the magnetic structure breaks spin-rotation symmetry, the Weyl nodes are stable without SOC. Moreover, because of the large separation between Weyl points of opposite topological charge, the Fermi arcs extent up to 75% of the reciprocal lattice vectors in length. Furthermore, this makes Ti 2 MnAl an excellent candidate for the comprehensive study of magnetic Weyl semimetals. It is the first example of a material with Weyl points, large anomalous Hall effect, and angle despite a vanishing net magnetic moment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Magnetization reversal and local switching fields of ferromagnetic Co/Pd microtubes with radial magnetization

Three-dimensional nanomagnetism is a rapidly growing field of research covering both noncollinear spin textures and curved magnetic geometries including microtubular structures. Here, we spatially resolve the field-induced magnetization reversal of free-standing ferromagnetic microtubes utilizing multifrequency magnetic force microscopy (MFM). The microtubes are composed of Co/Pd multilayer films with perpendicular magnetic anisotropy that translates to an anisotropy with radial easy axis upon rolling-up. Simultaneously mapping the topography and the perpendicular magnetostatic force derivative, the relation between surface angle and local magnetization configuration is evaluated for a large number of locations with slopes exceeding 45 degrees. The angle-dependence of the switching field is concurrent with the Kondorsky model, i.e., the rolled-up nanomembrane behaves like a planar magnetic film with perpendicular anisotropy and a pinning dominated magnetization reversal. Additionally, we discuss methodological challenges when detecting magnetostatic force derivatives near steep surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Competing magnetic states in multiferroic BaYFeO 4 : A high magnetic field study

Spin-driven ferroelectricity phenomena have drawn great interest in the scientific community due to potential application in spintronics and their complex physical mechanisms. A noticeable example of this is multiferroic BaYFeO 4 that exhibits an unconventional magnetoelectric (ME) coupling due to the uncorrelated behavior of the ferroelectric and cycloidal states under an applied magnetic field. To shed more light on this spin-driven ME effect, a high-quality sample of BaYFeO 4 was synthesized by a standard solid-state reaction method, and its high-field (up to 9 T) magnetic properties have been systematically investigated by means of magnetometry, magnetocaloric effect, and Mössbauer measurements over a wide temperature range (5–400 K). In addition, its crystal and magnetic structures have been studied using x-ray and neutron powder diffraction. Results obtained in this work indicate that Fe spins form a long-range spin density wave (SDW) antiferromagnetic (AFM) order at $T_{\text{N1}}$ ~ 50K, which transforms into the cycloidal AFM order at $T_{\text{N2}}$ ~ 35K. A spin-glass-like state emerges below $T^\ast$ ~ 17K, and coexists with the long-range cycloidal AFM one in this temperature range. Magnetocaloric and Mössbauer measurements consistently confirm the robustness of both the long-range SDWand cycloidal AFM orders under applied magnetic fields up to 6 T, whereas the spin-glass state is converted into the ferromagnetic (FM) state when the applied magnetic field exceeds 1 T. These findings pinpoint the fact that the magnetic field evolution of spin correlations from the AFM to FM character in the spin-glass state is responsible for the magnetic field dependence of ferroelectricity in BaYFeO 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Magnetic order and spin liquid behavior in [Mo 3 ] 11+ molecular magnets

Molecular magnets based on [Mo 3 ] 11+ units with one unpaired electron per trimer have attracted recent interest due to the identification of quantum spin liquid candidacy in some family members. Here, we present comprehensive measurements on polycrystalline samples of ZnScMo 3 O 8 , MgScMo 3 O 8 , and Na 3 Sc 2 Mo 5 O 16 with the same Mo 3 O 13 magnetic building blocks. In this work, the crystal structures are characterized with x-ray or neutron powder diffraction and the magnetic ground states are determined by performing ac and dc susceptibility, specific heat, neutron powder diffraction, and muon spin relaxation measurements. Our work indicates that ZnScMo 3 O 8 and MgScMo 3 O 8 have ferromagnetic Curie-Weiss temperatures of 18.5 and 11.9 K, ordered ground states with net moments (low-moment ferromagnetism or canted antiferromagnetism), and zero field ordering temperatures of $T_c$ = 6 K and $T_c$ < 2 K, respectively. On the other hand, Na 3 Sc 2 Mo 5 O 16 hosts a dynamical magnetic ground state with no evidence for magnetic ordering or spin freezing down to 20 mK despite an antiferromagnetic Curie-Weiss temperature of –36.2 K, and therefore is a candidate for quantum spin liquid behavior. By comparing the present results to past work on the same family of materials, we construct a phase diagram which illustrates that the magnetic ground states of these Mo-based molecular magnets are very sensitive to small changes in the nearest-neighbor Mo-Mo distance.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Magnetic design of the commutational magnet and quadrupoles for PERLE accelerator

PERLE (Powerful Energy Recovery LINAC for Experiment) is a high-power Energy Recovery LINAC (ERL) facility with 20 mA beam current and beam energy from 250 MeV to 500 MeV featuring three passes through two cryomodules. It is a hub for validation of the ERL technology development towards future energy and intensity frontier machines. Design challenges of PERLE and its beam parameters make it a test-bed to validate multi-turn high current ERL operation for the LHeC. It will be the first ERL for some pioneering experiment of the eN interaction with radioactive nuclei. In this work, design and optimization of the commutational magnet (B-com) used to spread/combine the three beams and one series of the quadrupole magnet is discussed. It gives the design parameters including: yoke geometry, pole profile, and material, and calculation of the excitation current needed to drive the magnet, the coil parameters and the number of turns. The B-com magnet is optimized for a 30° bending angle with magnetic field of 0.88 T along the magnet length and a harmonic content of 0.036%. The quadrupole magnet is designed for a gradient field of 34.15 T/m and experiences saturation above this value. Further studies to avoid saturation and achieve the maximum gradient of 44.1 T/m required by the beam dynamics is undergoing.

Abukeshek, R.↗
DOE OSTI2023

Emergent orbital magnetization in Kitaev quantum magnets

Unambiguous identification of the Kitaev quantum spin liquid (QSL) in materials remains a huge challenge despite many encouraging signs from various measurements. To facilitate the experimental detection of the Kiteav QSL, here we propose to use remnant charge response in Mott insulators hosting QSL to identify the key signatures of QSL. We predict an emergent orbital magnetization in a Kitaev system in an external magnetic field. The direction of the orbital magnetization can be flipped by rotating the external magnetic field in the honeycomb plane. The orbital magnetization is demonstrated explicitly through a detailed microscopic analysis of the multiorbital Hubbard-Kanamori Hamiltonian and also supported by a phenomenological picture. We first derive the localized electrical loop current operator in terms of the spin degrees of freedom. Thereafter, utilizing the Majorana representation, we estimate the loop currents in the ground state of the chiral Kitaev QSL state, and obtain the consequent current textures, which are responsible for the emergent orbital magnetization. Finally, we discuss the possible experimental techniques to visualize the orbital magnetization which can be considered as the signatures of the underlying excitations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetic Energy Release, Plasma Dynamics, and Particle Acceleration in Relativistic Turbulent Magnetic Reconnection

In strongly magnetized astrophysical plasma systems, magnetic reconnection is believed to be the primary process during which explosive energy release and particle acceleration occur, leading to significant high-energy emission. Past years have witnessed active development of kinetic modeling of relativistic magnetic reconnection, supporting this magnetically dominated scenario. A much less explored issue in studies of relativistic reconnection is the consequence of three-dimensional dynamics, where turbulent structures are naturally generated as various types of instabilities develop. This paper presents a series of three-dimensional, fully kinetic simulations of relativistic turbulent magnetic reconnection (RTMR) in positron–electron plasmas with system domains much larger than kinetic scales. Our simulations start from a force-free current sheet with several different modes of long-wavelength magnetic field perturbations, which drive additional turbulence in the reconnection region. Because of this, the current layer breaks up and the reconnection region quickly evolves into a turbulent layer filled with coherent structures such as flux ropes and current sheets. Additionally, we find that plasma dynamics in RTMR is vastly different from its 2D counterpart in many aspects. The flux ropes evolve rapidly after their generation, and can be completely disrupted by the secondary kink instability. This turbulent evolution leads to superdiffusive behavior of magnetic field lines as seen in MHD studies of turbulent reconnection. Meanwhile, nonthermal particle acceleration and the timescale for energy release can be very fast and do not depend strongly on the turbulence amplitude. Additionally, the main acceleration mechanism is a Fermi-like acceleration process supported by the motional electric field, whereas the nonideal electric field acceleration plays a subdominant role. We also discuss possible observational implications of three-dimensional RTMR in high-energy astrophysics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Sub-Alfvénic Turbulence: Magnetic-to-kinetic Energy Ratio, Modification of Weak Cascade, and Implications for Magnetic Field Strength Measurements

Abstract We study the properties of sub-Alfvénic magnetohydrodynamic (MHD) turbulence, i.e., turbulence with Alfvén mach number M A = V L / V A < 1, where V L is the velocity at the injection scale and V A is the Alfvén velocity. We demonstrate that MHD turbulence can have different properties, depending on whether it is driven by velocity or magnetic fluctuations. If the turbulence is driven by isotropic bulk forces acting upon the fluid, i.e., is velocity driven, in an incompressible conducting fluid we predict that the kinetic energy is M A − 2 times larger than the energy of magnetic fluctuations. This effect arises from the long parallel wavelength tail of the forcing, which excites modes with k ∥ / k ⊥ < M A . We also predict that as the MHD turbulent cascade reaches the strong regime, the energy of slow modes exceeds the energy of Alfvén modes by a factor M A − 1 . These effects are absent if the turbulence is driven through magnetic fluctuations at the injection scale. We confirm our predictions with numerical simulations. Since the assumption of magnetic and kinetic energy equipartition is at the core of the Davis–Chandrasekhar–Fermi (DCF) approach to measuring magnetic field strength in sub-Alfvénic turbulence, we conclude that the DCF technique is not universally applicable. In particular, we suggest that the dynamical excitation of long azimuthal wavelength modes in the galactic disk may compromise the use of the DCF technique. We discuss alternative expressions that can be used to obtain magnetic field strength from observations and consider ways of distinguishing the cases of velocity and magnetically driven turbulence using observational data.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1974

Magnetization and magnetic susceptibility of DyH3

The magnetization and differential magnetic susceptibility of powdered samples of DyH3 have been measured at 4.2 K in applied magnetic fields ranging to 9 Teslas. The differential magnetic susceptibility has also been studied in zero applied field as a function of temperature. The magnetization data are described by an equation of the form M = aB/(1 + bB + cB. The ratio a/b is a measure of the saturation magnetization and gives an effective moment of 5.12 Bohr magnetons per ion. The zero field susceptibility exhibits a maximum at T = 3.45 K, and an inflection point near 2.85 K. The susceptibility at 4.2 K has a 1/B squared dependence on the applied magnetic field for B approximately greater than 0.3 Teslas.

Flood, D. J.↗