Mars - Correlation of optical and radar observations.
Correlation of optical and radar observations of Mars
LIGHT (VISIBLE RADIATION)↗
SEARCH · Search NASA
Results for “MARS PLANET”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Planetary trajectory handbooks for mission analysis
Planetary trajectory handbooks for mission and system analysis covering opportunities for Mercury, outer planets and Mars, contour charts, etc
Norman, S.↗
Flying automated laboratories to the planets.
Review of results obtained by instrumented spacecraft in investigation of the planets, mainly Mars. It appears that Mars is a world of varying topographical structure, some of which must have been created by the same processes that sculptured the moon and by others thus far unique in the solar system. The atmosphere is too thin to shield the surface, and there are no traces of liquid water. The very large recent dust storm is discussed. Mariner 9 has revealed definite indication of probable volcanic activity on Mars in recent geologic times.-
Pickering, W. H.↗
NASA environmental design criteria
Environmental Design Criteria Monographs have been published to give the designer of spacecraft and the planner of space missions the best information which is currently available concerning the environmental conditions existing in various areas of outer space. Information is provided concerning the solar electromagnetic radiation, the earth's atmosphere, the earth albedo, the earth's trapped radiation belts, the Mars' atmosphere, the Venus atmosphere, the surface of Mars, the planet Jupiter, the planet Mercury, the planet Saturn, Titan's atmosphere, and the assessment and control of the magnetic fields of a spacecraft.
Mills, S. A.↗
Aerothermodynamic design feasibility of a generic planetary aerocapture/aeromaneuver vehicle
Lifting aerodynamic configurations have been screened and selected for a generic planetary aerocapture/aeromaneuver vehicle where a common configuration will be utilized for missions to any of several planets including Mars, Saturn and Uranus. Hypersonic convective and radiative heat transfer to these vehicles was estimated based on a combination of three-dimensional inviscid and viscous flow field solutions and from engineering correlations developed for the numerous complete convective and radiative heat transfer evaluations in CO2 and H2-He mixtures from the Pioneer Venus and Galileo programs. Thermal protection materials have been selected and sized. It is recommended that the thermal protection system be designed for each specific mission, thus maximizing the deliverable payload. Aerothermodynamic technology needs of this generic aerocapture concept are identified.
Florence, D. E.↗
Mars: A water-rich planet
Good geomorphic evidence is presented for a planet that was once water rich, and that a lower limit on the amount of water available for a given Martian watershed may be estimated by assuming that the volume of material eroded was equal to the volume of water available. This estimate, coupled with high latitude water estimates of 50 to 100 m gives a global inventory of about 500 m total water in the subsurface. It was emphasized that this is a lower limit as considerable water may be bound in weathered debris and in primary minerals.
Carr, Michael H.↗
The tectonics of Mercury
The probable tectonic history of Mercury and the relative sequence of events are discussed on the basis of data collected by the Mariner-10 spacecraft. Results indicate that Mercury's tectonic activity was confined to its early history; its endogenic activity was principally due to a small change in the shape of its lithosphere, caused by tidal despinning, and a small change in area caused by shrinkage due to cooling. Exogenic processes, in particular the impact activity, have produced more abundant tectonic features. Many features associated with the Caloris basin are due to loading of Mercury's thick lithosphere by extrusive lavas or subsidence due to magma withdrawal. It is emphasized that tectonic features observed on Mercury yield insight into the earliest tectonic events on planets like Mars and, perhaps, the earth, where subsequent events obscured or erased the most ancient tectonic records.
Melosh, H. J.↗
Terrain mapping for a roving planetary explorer
A prototype legged vehicle is being developed for an exploratory mission on another planet, conceivably Mars, where it is to traverse uncharted areas and collect material samples. The rover can construct from range imagery a geometric terrain representation; i.e., elevation map that includes uncertainty, unknown areas, and local features. An algorithm for constructing an elevation map from a single range image is presented: by virtue of working in spherical-polar space, the algorithm is independent of the desired map resolution and the orientation of the sensor, unlike algorithms that work in Cartesian space. Also presented is a two-stage matching technique (feature matching followed by iconic matching) that identifies the transformation T corresponding to the vehicle displacement between two viewing positions. To support legged locomotion over rough terrain, methods for evaluating regions of the constructed elevation maps as footholds are developed.
Hebert, M.↗
The meteoritic contribution to dust and aerosols in the atmosphere of Mars
The continuous, planet-wide accretion of meteoritic material onto the Earth and Moon has been established by stratospheric sampling on Earth and chemical abundance analysis of the lunar soils. Meteoritic material must contribute in a similar manner to the atmospheres of all the planets and moons of the inner solar system. Although meteorites that survive planetary entry unmelted are the primary contributors, secondary contributions come from: (1) recondensed vapor in meteorite trails; and (2) fragmentation debris from low density meteoroids. These three contributions provide a constant planet-wide source of atmospheric particulates on Mars. In the size range greater than 1 micro-m in diameter micrometeorites which survive atmospheric entry unmelted are the major contributor, accounting for about 8.6 x 10(exp 6) kg/year of material. For particles less than 1 micro-m in diameter the majority of the mass is likely to come from recondensed meteoric vapor, which could account for approx. 2 x 10(exp 6) kg/year.
Flynn, G. J.↗
1991 DA: An asteroid in a bizarre orbit
Asteroidal object 1991 DA has an orbit of high inclination, crossing the planets from Mars to Uranus. This is unique for an asteroid, but not unusual for a comet of the Halley-type: it therefore seems likely that 1991 DA is an extinct or dormant comet. Previous CCD imaging has shown no indication of a coma; spectroscopic observations of 1991 DA which lack any evidence of strong comet-like emissions are reported. Numerical integrations of the orbit of this object were performed which show that is has been remarkably stable for the past approximately 20,000 yr, but chaotic before that. This may allow a new estimate to be made of the physical lifetimes of comets.
Steel, Duncan↗
Rovers as Geological Helpers for Planetary Surface Exploration
Rovers can be used to perform field science on other planetary surfaces and in hostile and dangerous environments on Earth. Rovers are mobility systems for carrying instrumentation to investigate targets of interest and can perform geologic exploration on a distant planet (e.g. Mars) autonomously with periodic command from Earth. For nearby sites (such as the Moon or sites on Earth) rovers can be teleoperated with excellent capabilities. In future human exploration, robotic rovers will assist human explorers as scouts, tool and instrument carriers, and a traverse "buddy". Rovers can be wheeled vehicles, like the Mars Pathfinder Sojourner, or can walk on legs, like the Dante vehicle that was deployed into a volcanic caldera on Mt. Spurr, Alaska. Wheeled rovers can generally traverse slopes as high as 35 degrees, can avoid hazards too big to roll over, and can carry a wide range of instrumentation. More challenging terrain and steeper slopes can be negotiated by walkers. Limitations on rover performance result primarily from the bandwidth and frequency with which data are transmitted, and the accuracy with which the rover can navigate to a new position. Based on communication strategies, power availability, and navigation approach planned or demonstrated for Mars missions to date, rovers on Mars will probably traverse only a few meters per day. Collecting samples, especially if it involves accurate instrument placement, will be a slow process. Using live teleoperation (such as operating a rover on the Moon from Earth) rovers have traversed more than 1 km in an 8 hour period while also performing science operations, and can be moved much faster when the goal is simply to make the distance. I will review the results of field experiments with planetary surface rovers, concentrating on their successful and problematic performance aspects. This paper will be accompanied by a working demonstration of a prototype planetary surface rover.
Stoker, Carol↗
Kepler Mission: A Search for Terrestrial Planets
The Kepler Mission is a search for terrestrial planets by monitoring a large ensemble of stars for the periodic transits of planets. The mission consists of a 95-cm aperture photometer with 105 square deg field of view that monitors 100,000 dwarf stars for four years. The mission is unique in its ability to detect Earth-size planets in the habitable zone of other stars in the extended solar neighborhood. An Earth-size transit of a solar-like star causes a change in brightness of about 100 ppm. Laboratory testing has demonstrated that a total system noise level of 20 ppm is readily achievable on the timescale of transits. Earth-like transits have been created and reliably measured in an end-to-end system test that has all known sources of noise including, spacecraft jitter. To detect Earth-size planets, the photometer must be spaceborne; this also eliminates the day-night and seasonal cycle interruptions of ground-based observing. The photometer will stare at a single field of stars for four years, with an option to continue for two more years. This allows for detection of four transits of planets in Mars-like orbits and detection of planets even smaller than Earth especially for short period orbits, since the signal to noise improves as the square root of the number of transits observed. In addition to detection of planets, Kepler data are also useful for understanding the activity cycles and rotation rates of the stars observed. For the 3,000 stars brighter than mv= 11.4 p-mode oscillations are measured. The mission has been selected as one of three candidates for NASA's next Discovery mission.
Koch, D.↗
Effect of Microgravity on Mammalian Lymphocytes
The effect of microgravity on mammalian system is an important and interesting topic for scientific investigation, since NASA s objective is to send manned flights to planets like Mars and eventual human colonization.The Astronauts will be exposed to microgravity environment for a long duration of time during these flights.Our objective of research is to conduct in vitro studies for the effect of microgravity on mammalian immune system.We did our preliminary investigations by exposing mammalian lymphocytes to a microgravity simulator cell bioreactor designed by NASA and manufactured at Synthecon Inc (USA).Our initial results showed no significant change in cytokine expression in these cells for a time period of forty eight hours exposure.Our future experiments will involve exposure for a longer period of time.
Banerjee, H.↗
Farming in space: environmental and biophysical concerns
The colonization of space will depend on our ability to routinely provide for the metabolic needs (oxygen, water, and food) of a crew with minimal re-supply from Earth. On Earth, these functions are facilitated by the cultivation of plant crops, thus it is important to develop plant-based food production systems to sustain the presence of mankind in space. Farming practices on earth have evolved for thousands of years to meet both the demands of an ever-increasing population and the availability of scarce resources, and now these practices must adapt to accommodate the effects of global warming. Similar challenges are expected when earth-based agricultural practices are adapted for space-based agriculture. A key variable in space is gravity; planets (e.g. Mars, 1/3 g) and moons (e.g. Earth's moon, 1/6 g) differ from spacecraft orbiting the Earth (e.g. Space stations) or orbital transfer vehicles that are subject to microgravity. The movement of heat, water vapor, CO2 and O2 between plant surfaces and their environment is also affected by gravity. In microgravity, these processes may also be affected by reduced mass transport and thicker boundary layers around plant organs caused by the absence of buoyancy dependent convective transport. Future space farmers will have to adapt their practices to accommodate microgravity, high and low extremes in ambient temperatures, reduced atmospheric pressures, atmospheres containing high volatile organic carbon contents, and elevated to super-elevated CO2 concentrations. Farming in space must also be carried out within power-, volume-, and mass-limited life support systems and must share resources with manned crews. Improved lighting and sensor technologies will have to be developed and tested for use in space. These developments should also help make crop production in terrestrial controlled environments (plant growth chambers and greenhouses) more efficient and, therefore, make these alternative agricultural systems more economically feasible food production systems. c2002 COSPAR. Published by Elsevier Science Ltd. All rights reserved.
Review↗
Refinement of planetary protection policy for Mars missions
Under existing COSPAR policy adopted in 1984, missions to Mars (landers, probes, and some orbiters) are designated as Category IV missions. As such, the procedures for implementing planetary protection requirements could include trajectory biasing, cleanrooms, bioload reduction, sterilization of hardware, and bioshields. In 1992, a U.S. National Research Council study recommended that controls on forward contamination of Mars be tied to specific mission objectives. The report recommended that Mars landers with life detection instruments be subject to at least Viking-level sterilization procedures for bioload reduction, while spacecraft (including orbiters) without life detection instruments be subject to at least Viking-level pre-sterilization procedures for bioload reduction but need not be sterilized. In light of this, it is proposed that the current policy's Category IV and its planetary protection requirements be divided into two sub-categories as follows: Category IVa, for missions comprising landers and probes without life detection experiments, which will meet a specified bioburden limit for exposed surfaces, and Category IVb, for landers and probes with life detection experiments, which will require sterilization of landed systems. In addition, Category III orbiter mission specifications are expanded to be consistent with these recommendations.
NASA Discipline Exobiology↗
Effect of Microgravity on Mammalian Lymphocytes
The effect of microgravity on mammalian system is an important and interesting topic for scientific investigation, since NASA s objective is to send manned flights to planets like Mars and eventual human colonization. The Astronauts will be exposed to microgravity environment for a long duration of time during these flights. Our objective of research is to conduct in vitro studies for the effect of microgravity on mammalian immune system and nervous system. We did our preliminary investigations by exposing mammalian lymphocytes and astrocyte cells to a microgravity simulator cell bioreactor designed by NASA and manufactured at Synthecon, Inc. (USA).Our initial results showed no significant change in cytokine expression in these cells up to a time period of 120 hours exposure. Our future experiments will involve exposure for a longer period of time.
Banerjee, H.↗
System for Packaging Planetary Samples for Return to Earth
A system is proposed for packaging material samples on a remote planet (especially Mars) in sealed sample tubes in preparation for later return to Earth. The sample tubes (Figure 1) would comprise (1) tubes initially having open tops and closed bottoms; (2) small, bellows-like collapsible bodies inside the tubes at their bottoms; and (3) plugs to be eventually used to close the tops of the tubes. The top inner surface of each tube would be coated with solder. The side of each plug, which would fit snugly into a tube, would feature a solder-filled ring groove. The system would include equipment for storing, manipulating, filling, and sealing the tubes. The containerization system (see Figure 2) will be organized in stations and will include: the storage station, the loading station, and the heating station. These stations can be structured in circular or linear pattern to minimize the manipulator complexity, allowing for compact design and mass efficiency. The manipulation of the sample tube between stations is done by a simple manipulator arm. The storage station contains the unloaded sample tubes and the plugs before sealing as well as the sealed sample tubes with samples after loading and sealing. The chambers at the storage station also allow for plug insertion into the sample tube. At the loading station the sample is poured or inserted into the sample tube and then the tube is topped off. At the heating station the plug is heated so the solder ring melts and seals the plug to the sample tube. The process is performed as follows: Each tube is filled or slightly overfilled with sample material and the excess sample material is wiped off the top. Then, the plug is inserted into the top section of the tube packing the sample material against the collapsible bellowslike body allowing the accommodation of the sample volume. The plug and the top of the tube are heated momentarily to melt the solder in order to seal the tube.
Badescu, Mircea↗