Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mapper”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Spectral characterization of biophysical characteristics in a boreal forest - Relationship between Thematic Mapper band reflectance and leaf area index for Aspen

Results from analysis of a data set of simultaneous measurements of Thematic Mapper band reflectance and leaf area index are presented. The measurements were made over pure stands of Aspen in the Superior National Forest of northern Minnesota. The analysis indicates that the reflectance may be sensitive to the leaf area index of the Aspen early in the season. The sensitivity disappears as the season progresses. Based on the results of model calculations, an explanation for the observed relationship is developed. The model calculations indicate that the sensitivity of the reflectance to the Aspen overstory depends on the amount of understory present.

Badhwar, G. D.↗
NASA NTRS1985

Landsat Thematic Mapper geodetic accuracy - Implications for geocoded map compatibility

The geodetic accuracy and geometric fidelity of corrected thematic mapper (TM) imagery are evaluated. The positional accuracy requirements for the TM are for a single band to within 0.5 pixels of true earth-surface locations at any point over 90 percent of the image and for interband registration to within 0.3 pixel tolerance over 90 percent of the data. Landsat 4 and 5 TM data are analyzed to investigate: (1) single band geometric integrity, (2) 30 m resolution interband registration; (3) image to image conformity; (4) image to ground conformity; and (5) image projective geometry conformity to a mapped earth geometry. The procedures used to study these characteristics are described. The data reveal that Landsat TM digital data met or exceed map accuracy standards for horizontal control.

Bryant, N. A.↗
NASA NTRS1986

Fourier transform techniques for the evaluation of the Thematic Mapper line spread function

An endeavor was made to use Fourier transform techniques to estimate the line spread function (LSF) of the Thematic Mapper (TM) from processed data. Data near the boundary of small fields from TM scenes were sampled, fitted to a theoretical curve, lowpass filtered, and then deconvolved to obtain the LSF. Lowpass filtering improved the truncation effect and eliminated the discontinuity at both ends of the data sequence.The selection of the cutoff frequency and the order of a lowpass filter is based on a newly defined criterion which tests the distortion of the processed edge by comparing it with the original edge. A parameter of the LSF, the equivalent width, is used to compare these LSF's deconvolved from sampled edge data with those evaluated by the derivative techniques. The calculated equivalent widths using the Fourier transform techniques for infrared bands are very close to TM design specifications.

Carnahan, W. H.↗
NASA NTRS1986

Orbit determination study results for the Venus Radar Mapper orbiter

The Venus Radar Mapper (VRM), to be launched by the U.S. in July 1988 is described and Doppler-only and Doppler plus N-Delta-VLBI data analyses are contrasted in order to evaluate the importance of VLBI data to VRM orbit determination (OD). VRM OD study results are summarized by showing the accuracy of various orbital parameters for ten cases selected over a 243-day primary mission. It is concluded that VLBI data were responsible for improving the knowledge of the longitude of the ascending node with respect to the plane of the sky by a factor of 5 to 10 throughout (excluding superior conjunction) this primary mission. It is noted that there is a certain sensitivity to where along the orbit the VLBI data are acquired.

Esposito, P. B.↗
NASA NTRS1986

Venus radar mapper attitude reference quaternion

Polynomial functions of time are used to specify the components of the quaternion which represents the nominal attitude of the Venus Radar mapper spacecraft during mapping. The following constraints must be satisfied in order to obtain acceptable synthetic array radar data: the nominal attitude function must have a large dynamic range, the sensor orientation must be known very accurately, the attitude reference function must use as little memory as possible, and the spacecraft must operate autonomously. Fitting polynomials to the components of the desired quaternion function is a straightforward method for providing a very dynamic nominal attitude using a minimum amount of on-board computer resources. Although the attitude from the polynomials may not be exactly the one requested by the radar designers, the polynomial coefficients are known, so they do not contribute to the attitude uncertainty. Frequent coefficient updates are not required, so the spacecraft can operate autonomously.

Lyons, D. T.↗
NASA NTRS1985

The Landsat thematic mapper World Data Base

A World Data Base of potential thematic mapper (TM) scenes was developed to aid in acquisition planning. The World Data Base contains geopolitical, geographic and economic regions along with a format that enables users to find the satellite day, sun angle and cloud cover probability for any month of the year. Scenes that have been acquired by TM and have an average cloud cover of 30 percent of less from July 1982 when TM was launched until the Landsat system was taken over by NOAA in September 1984 are also in the World Data Base. Processed data are referenced in maps and data bases at EROS Data Center; however, a large number of acquistions have never been processed and therefore are not accessible. The World Data Base enables the rapid location of scenes and areas with the least effort making it invaluable in TM scheduling. Users of TM data can use the World Data Base to determine if scenes of interest have been acquired, the acquisition date, and if scenes have been processed to computer-compatible tape (CCT). These uses of the World Data Base make it a valuable tool in the acquisition and location of TM scenes.

Ludwig, R. W.↗
NASA NTRS1985

The geometric properties of Landsat-5 Thematic Mapper data and their conformity to Landsat-4 data and to earth's surface geometry

The geometry of two TIPS processed Landsat-5 Thematic Mapper scenes was analyzed and compared with that of SCROUNGE processed Landsat-4 data. Swath-to-swath and band-to-band registration of Washington, DC, and northeastern Iowa scenes was found to be similar to or better than that of Landsat-4 data. Results indicate a high degree of geometric conformity between the images produced by the different systems. The geometric conformity of the TIPS processed images to the Space Oblique Mercator projection, however, proved to be less accurate than the targeted processing error of 15 meters.

Walker, R. E.↗
NASA NTRS1985

Operational MTF for Landsat Thematic Mapper

The Landsat Thematic Mapper (TM) represents significant improvements in spatial, spectral, and radiometric resolution over the older Multispectral Scanner System (MSS). For the last three years, NASA has conducted the Landsat Image Data Quality Analysis (LIDQA) program to quantify the performance of the TM on the Landsat-4 and 5 spacecraft. As part of this program, analysis of the TM imagery to extract the overall system modulation transfer function (MTF) has been performed. In this paper, the San Mateo Bridge in San Francisco is described as a target for calculation of the line spread function and MTF. The analysis of two TM scenes, one from 12/31/82 and one from 8/12/83, yielded effective-instantaneous-field-of-views (EIFOVs) of 40.8 meters and 48.6 meters, respectively. These values are compared with the 33.8 meter EIFOV predicted by component modelling of the TM sensor, and the differences discussed.

Schowengerdt, R.↗
NASA NTRS1986

Geobotanical information contained in Landsat Thematic Mapper images covering southern Missouri

Landsat Thematic Mapper (TM) data collected in the late summer, fall, and winter of 1982 over forested bedrocks in southeastern Missouri were used in conjunction with forest surveys, field work, aerial photographs, and laboratory analyses to evaluate multispectral and seasonal information from visible and reflected IR data. The forested bedrock included granites, rhyolites, carbonates, and sandstones. High reflectance in band 4 (760-900 nm) in the summer scene corresponds to regions of xeric forest type. The fact that the xeric regions tend to develop flat-topped canopies, as opposed to irregular canopy surfaces of the wetter mesic areas, may partially control the TM response in bands 4, 5 (155-175 nm) and 7 (208-235 nm). The xeric regions correlated with soils having poor water retention capabilities, such as rhyolites and certain carbonate rocks with nonporous residum layers. An opposite relationship between xeric and mesic forest biomass was noted, if the commonly used TM band ratio 4/3 was used as a surrogate biomass measure. The high band 4 response over xeric forests gives anomalously high biomass estimates.

Green, G.↗
NASA NTRS1986

Thematic mapper study of Alaskan ophiolites

The combinations of Thematic Mapper (TM) bands that best distinguish basalts of the Brooks Range ophiolites were determined. Geochemical analyses, including major, trace, and rare earth elements (REE), are being done in order to study the significance of TM spectral variations that were observed within some of the sampled rock units. An image of the topography of the western Brooks Range and Colville Basin was constructed. Elevation data for the rest of Northern Alaska are being acquired to expand the area covered by the topography image. Two balanced cross sections (one along the eastern margin, the other along the western margin of the Brooks Range) are being constructed, using the techniques of fault-bend and fault-propagation folding. These are being used to obtain regional shortening estimates for the Brooks Range in an attempt to constrain tectonic models for the evolution of Northern Alaska. The TM data are being used to confirm reconnaissance maps and to obtain structural data where no maps exist. Along with the TM data, digital topography, seismic reflection profiles, and magnetic and gravity surveys are examined to better understand the evolution of the Colville Basin, north of the Brooks Range.

Bird, J. M.↗
NASA NTRS1985

Lightning mapper and the future

A trade-off analysis was completed that reveals how the lightning mapper detection efficiency will change as a function of interference filter bandwidth, pixel field of view, and telescope aperture. It is shown that the critical parameter on which we have minimum flexibility is filter band-width. The problem is that too narrow a filter bandwidth is incompatible with wide areal coverage. The trade-off analysis demonstrates that an 80 percent lightning detection efficiency will technically be relatively straight-forward, while a 90 percent detection efficiency will apparently be difficult to achieve. Three focal plane designs are currently under consideration. One would use a single large, solid state silicon integrating array with multiple output channels and off-the-focal-plane analog, time domain, background removing fibers. A second design would use the same technology, but the sensor would consist of up to four virtually independent focal plane arrays. This design reduces the areal coverage of each detector. Thus narrower interference filters could be utilized. Superior performance would be realized at a probable increase in cost. The final design would use a three-dimensional focal plane in order to perform background removal at the focal plane. Superior performance would be achieved along with reduced weight and power requirements. Unfortunately, this focal plane technology is still under development.

Christian, H. J.↗
NASA NTRS1987

Modeling energy flow and nutrient cycling in natural semiarid grassland ecosystems with the aid of thematic mapper data

Energy flow and nutrient cycling were modeled as affected by herbivory on selected intensive sites along gradients of precipitation and soils, validating the model output by monitoring selected parameters with data derived from the Thematic Mapper (TM). Herbivore production was modeled along the gradient of soils and herbivory, and validated with data derived from TM in a spatial data base.

Lewis, James K.↗
NASA NTRS1986

Venus Radar Mapper (VRM): Multimode radar system design

The surface of Venus has remained a relative mystery because of the very dense atmosphere that is opaque to visible radiation and, thus, normal photographic techniques used to explore the other terrestrial objects in the solar system are useless. The atmosphere is, however, almost transparent to radar waves and images of the surface have been produced via Earth-based and orbital radars. The technique of obtaining radar images of a surface is variously called side looking radar, imaging radar, or synthetic aperture radar (SAR). The radar requires a moving platform in which the antenna is side looking. High resolution is obtained in the cross-track or range direction by conventional radar pulse encoding. In the along-track or azimuth direction, the resolution would normally be the antenna beam width, but for the SAR case, a much longer antenna (or much sharper beam) is obtained by moving past a surface target as shown, and then combining the echoes from many pulses, by using the Doppler data, to obtain the images. The radar design of the Venus Radar Mapper (VRM) is discussed. It will acquire global radar imagery and altimetry data of the surface of Venus.

Johnson, William T. K.↗
NASA NTRS1986

Radiometric analysis of the longwave infrared channel of the Thematic Mapper on LANDSAT 4 and 5

The first objective was to evaluate the postlaunch radiometric calibration of the LANDSAT Thematic Mapper (TM) band 6 data. The second objective was to determine to what extent surface temperatures could be computed from the TM and 6 data using atmospheric propagation models. To accomplish this, ground truth data were compared to a single TM-4 band 6 data set. This comparison indicated satisfactory agreement over a narrow temperature range. The atmospheric propagation model (modified LOWTRAN 5A) was used to predict surface temperature values based on the radiance at the spacecraft. The aircraft data were calibrated using a multi-altitude profile calibration technique which had been extensively tested in previous studies. This aircraft calibration permitted measurement of surface temperatures based on the radiance reaching the aircraft. When these temperature values are evaluated, an error in the satellite's ability to predict surface temperatures can be estimated. This study indicated that by carefully accounting for various sensor calibration and atmospheric propagation effects, and expected error (1 standard deviation) in surface temperature would be 0.9 K. This assumes no error in surface emissivity and no sampling error due to target location. These results indicate that the satellite calibration is within nominal limits to within this study's ability to measure error.

Schott, John R.↗
NASA NTRS1987

Thematic mapper studies of central Andean volcanoes

A series of false color composite images covering the volcanic cordillera was written. Each image is 45 km (1536 x 1536 pixels) and was constructed using bands 7, 4, and 2 of the Thematic Mapper (TM) data. Approximately 100 images were prepared to date. A set of LANDSAT Multispectral Scanner (MSS) images was used in conjunction with the TM hardcopy to compile a computer data base of all volcanic structure in the Central Andean province. Over 500 individual structures were identified. About 75 major volcanoes were identified as active, or potentially active. A pilot study was begun combining Shuttle Imaging Radar (SIR) data with TM for a test area in north Chile and Bolivia.

Francis, Peter W.↗
NASA NTRS1986

Spectroradiometric calibration of the thematic mapper and multispectral scanner system

A list of personnel who have contributed to the program is provided. Sixteen publications and presentations are also listed. A preprint summarizing five in-flight absolute radiometric calibrations of the solar reflective bands of the LANDSAT-5 Thematic Mapper is presented. The 23 band calibrations made on the five dates show a 2.5% RMS variation from the mean as a percentage of the mean. A preprint is also presented that discusses the reflectance-based results of the above preprint. It proceeds to analyze and present results of a second, independent calibration method based on radiance measurements from a helicopter. Radiative transfer through the atmosphere, model atmospheres, the calibration methodology used at White Sands and the results of a sensitivity analysis of the reflectance-based approach is also discussed.

Slater, Philip N.↗
NASA NTRS1987

Thematic mapper study of Alaskan ophiolites

LANDSAT Thematic Mapper (TM) images were used to produce improved geologic maps of the ophiolites of the Brooks Range, and to recognize regional-scale structures that might affect the spatial distribution of the ophiolites. From the TM data, significant information was obtained concerning the distribution of rock types and structures that could not easily be acquired with conventional geologic studies. The information obtained from the TM data, in combination with other geologic data, is being used to further the understanding of the tectonic evolution of the Brooks Range. Results of the work in the Maiyumerak Mountains area are used to illustrate the information being obtained with the LANDSAT TM data, and the way that the information is being integrated with other geologic data.

Bird, John M.↗
NASA NTRS1987

Utilizing remote sensing of thematic mapper data to improve our understanding of estuarine processes and their influence on the productivity of estuarine-dependent fisheries

A stochastic spatial computer model addressing coastal resource problems in Lousiana is being refined and validated using thematic mapper (TM) imagery. The TM images of brackish marsh sites were processed and data were tabulated on spatial parameters from TM images of the salt marsh sites. The Fisheries Image Processing Systems (FIPS) was used to analyze the TM scene. Activities were concentrated on improving the structure of the model and developing a structure and methodology for calibrating the model with spatial-pattern data from the TM imagery.

Browder, Joan A.↗