Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mars Exploration Rover (MER)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

MER Surface Phase; Blurring the Line Between Fault Protection and What is Supposed to Happen

An assessment on the limitations of communication with MER rovers and how such constraints drove the system design, flight software and fault protection architecture, blurring the line between traditional fault protection and expected nominal behavior, and requiring the most novel autonomous and semi-autonomous elements of the vehicle software including communication, surface mobility, attitude knowledge acquisition, fault protection, and the activity arbitration service.

surface operations↗

The Chemistry and Mineralogy of Mars Soils: A Tour of Landed Mission Results from the Last 45 years

Eight landed missions demonstrated that martian soils (defined as loose, unconsolidated surface material) consist of basaltic mineralogy, iron (hydr)oxides, amorphous material, sulfate, chloride, (per)chlorate, nitrate, carbonate, and possible organic C. The Viking Lander 1 and 2 (1976), Mars Pathfinder (1997), and Mars Exploration Rover (MER-A,B) (2004) missions determined that martian soil was similar at all landing sites by having mafic chemistry, high S (~ 7 wt.% SO3) and Cl (0.7 wt.%), and spectral detections of poorly crystalline and crystalline Fe-(hydr)oxide phases. The MER Mössbauer spectrometers detected Fe-bearing olivine and pyroxene along with magnetite, nano-phase Fe-oxides (npOx), hematite, and ferric sulfate. The 2008 Phoenix Lander instrumentation measured a soil pH of 7.7 and detected ~0.6 wt.% perchlorate, 3-5 wt.% Ca-rich carbonate and carbon (500 gC/g) consistent with oxidized organics and Fe-rich carbonate. The 2012 Mars Science Laboratory (MSL) rover (Gale Crater) through X-ray diffraction detected plagioclase feldspar, pyroxene, magnetite, hematite, anhydrite, and quartz, with the balance being composed of Si/Fe-containing amorphous (30 to 40 wt.%) material. MSL evolved gas analysis detected (per)chlorate (0.4 wt.% ClO4), nitrate (0.23 wt.%), along with minor Fe/Mg sulfate and oxidized organic C (~2000 gC/g). Limited pedogenesis may have occurred at the 2018 InSight landing site and in one Gusev Crater soil (MER-B) which have 3 to 10 cm-thick duricrust horizons consistent with atmospheric water vapor interactions with soil salts. Martian soil primary mineralogy was derived mostly from local rock (volcanic, sedimentary) that is largely basaltic planet wide. Secondary minerals [e.g., sulfate, chloride, perchlorate, nitrate, carbonate, Fe-(hydr)oxides] in martian soils formed from oxidative aqueous alteration processes and were likely derived from a combination of local sedimentary rock sources and the global bright dust. The Mars 2020 mission will collect soil for Earth return to enable a thorough assessment of the nature and origin of martian soil.

Mars↗

Lithium-Ion rechargeable batteries on Mars Rover

NASA's Mars Rovers, Spirit and Opportunity, have been roving on the surface of Mars, capturing impressive images of its terrain and analyzing the drillings from Martian rocks, to answer the ever -puzzling questions of life beyond Earth and origin of our planets. These rovers are being enabled by an advanced rechargeable battery system, lithium-ion, for the first time on a space mission of this scale, for keeping the rover electronics warm, and for supporting nighttime experimentation and communications. These rover Li-ion batteries are characterized by their unique low temperature capability, in addition to the usual advantages associated with Li-ion chemistry in terms of mass, volume and energy efficiency. To enable a rapid insertion of this advanced Li-ion chemistry into flight missions, we have performed several performance assessment studies on several prototype cells over the last few years. These tests mainly focused primarily on the long-term performance characteristics, such as cycling and storage, as described in our companion paper. In addition, various tests have been performed on MER cells and engineering and proto flight batteries; under conditions relevant to these missions. For example, we have examined the performance of the cells in: a) an inverted orientation, as during integration and launch, and b) conditions of low rate discharge, between 3.0-2.5 V to support the mission clock. Likewise, we have determined the impedance of the proto-flight Rover battery assembly unit in detail, with a view to asses whether a current-limiting resistor would be unduly stressed, in the event of a shorting induced by a failed pyro. In this paper we will describe these studies in detail, as well as the performance of Li-ion batteries in Spirit and Opportunity rovers, during cruise and on Mars.

2003 Mars Exploration Rover (MER)↗

MAPGEN Planner: Mixed-Initiative Activity Planning for the Mars Exploration Rover Mission

This document describes the Mixed-initiative Activity Plan Generation system MAPGEN. The system is be- ing developed as one of the tools to be used during surface operations of NASA's Mars Exploration Rover mission (MER). However, the core technology is general and can be adapted to different missions and applications. The motivation for the system is to better support users that need to rapidly build activity plans that have to satisfy complex rules and fit within resource limits. The system therefore combines an existing tool for activity plan editing and resource modeling, with an advanced constraint-based reasoning and planning framework. The demonstration will show the key capabilities of the automated reasoning and planning component of the system, with emphasis on how these capabilities will be used during surface operations of the MER mission.

Ai-Chang, Mitch↗

Characterization of Layered Deposits inside Valles Marineris

This report represents the final progress report on our study of the Melas Chasma region on Mars that was proposed as a landing site for the Mars Exploration Rover mission (MER). During this two-year proposal (which was extended over three years by a no-cost extension), we conducted a thorough study of the layered deposits in western Melas Chasma that had been the location of a high priority MER mission landing ellipse within Valles Marineris. All available data sets from orbiter missions, including MOC, MOLA, THEMIS visible and infrared images were all used to analyze this site. The major outcome of this work was a published paper in the Journal of Geophysics and Research Planets [Weitz et al., 2004]. Our geologic mapping and interpretation of the MOC images suggest the landing ellipse contains three main geomorphologic units: (1) a blocky deposit consisting of bright blocks in a darker matrix (BD); (2) sand sheets composed of dark dunes; and (3) landslide deposits emanating from the wallrock to the west [Weitz et al., 2003]. Furthermore, we propose that the morphology of the BD unit in western Melas is a mass wasting deposit composed of blocks of Interior Layered Deposits (ILDs) mixed in with wallrock material. However, more recent MOC images indicate that in the eastern portion of the ellipse and adjacent to a large hill, there are blocks of material resembling those seen in BD. Hence, we cannot rule out the source of BD was this hill. Unfortunately, sand dunes obscure much of the deposit around this hill, making it impossible to precisely determine the connection between the hill and BD, whereas BD can be traced directly to the southern Melas wallrock. If BD resulted from a mass wasting event in the southern wallrock, then we would expect the material to be concentrated further to the north, as now appears to be the case. In summary, the exact source location for BD continues to remain a mystery, but we favor an origin from either the southern wallrock [Weitz et el., 2002] or the eastern hill.

Weitz, Catherine↗

Microbiological cleanliness of the Mars Exploration Rover spacecraft

Planetary protection for Mars missions is described, and the approach being taken by the Mars Exploration Rover Project is discussed. Specific topics include alcohol wiping, dry heat microbial reduction, microbiological assays, and the Kennedy Space center's PHSF clean room.

planetary protection Mars Exploration Rover MER↗

Remote image analysis for Mars Exploration Rover mobility and manipulation operations

NASA's Mars Exploration Rovers are two sixwheeled, 175-kg robotic vehicles which have operated on Mars for over a year as of March 2005. The rovers are controlled by teams who must understand the rover's surroundings and develop command sequences on a daily basis. The tight tactical planning timeline and everchanging environment call for tools that allow quick assessment of potential manipulator targets and traverse goals, since command sequences must be developed in a matter of hours after receipt of new data from the rovers. Reachability maps give a visual indication of which targets are reachable by each rover's manipulator, while slope and solar energy maps show the rover operator which terrain areas are safe and unsafe from different standpoints.

image understanding↗

Validation of Lithium-ion cell technology for JPL's 2003 Mars Exploration Rover Mission

n early 2004 JPL successfully landed two Rovers, named Spirit and Opportunity, on the surface of Mars after traveling >300 million miles over a 6-7 month period. In order to operate for extended duration on the surface of Mars, both Rovers are equipped with rechargeable Lithium-ion batteries, which were designed to aid in the launch, correct anomalies during cruise, and support surface operations in conjunction with a triple-junction deployable solar arrays. The requirements of the Lithium-ion battery include the ability to provide power at least 90 sols on the surface of Mars, operate over a wide temperature range (-20 C to +40 C), withstanding long storage periods (e.g., cruise period), operate in an inverted position, and support high currents (e.g., firing pyro events). In order to determine the viability of Lithium-ion technology to meet these stringent requirements, a comprehensive test program was implemented aimed at demonstrating the performance capability of prototype cells fabricated by Lithion, Inc. (Yardney Technical Products, Inc.). The testing performed includes, determining the (a) room temperature cycle life, (b) pulse capability as a function of temperature, (e) self-discharge and storage characteristics mission profile capability, (f) cycle life under mission simulation conditions, (g) impedance characteristics, (h) impact of cell orientation, and (i) performance in 8-cell engineering batteries. As will be discussed, the Lithium-ion prototype cells and batteries were demonstrated to meet, as well as, exceed the requirements defined by the mission.

2003 Mars Exploration Rover (MER)↗

Landing on Mars

here have been five fully successful robotic landings on Mars. The systems used to deliver these robots to the surface have shown large design diversity and continue to evolve. How will future Mars landing systems evolve to eventually deliver precious human cargo? We do not yet know the answers, but current trends tell us an interesting and daunting tale.

Mars Science Laboratory (MSL)↗

Propulsive maneuver design for the Mars Exploration Rover mission

Starting from approximately 150 candidate Martian landing sites, two distinct sites have been selected for further investigation by sophisticated rovers. The two rovers, named 'Spirit' and 'Opportunity', begin the surface mission respectively to Gusec Crater and Meridiani Planum in January 2004. the rovers are essentially robotic geologists, sent on a mission to research for evidence in the rocks and soil pertaining to the historical presence of water and the ability to possibly sustain life. Before this scientific search can commence, precise trajectory targeting and control is necessary to achieve the entry requirements for the selected landing sites within the constraints of the flight system. The maneuver design challenge is to meet or exceed these requirements while maintaining the necessary design flexibility to accommodate additional project concerns. Opportunities to improve performance and reduce risk based on trajectory control characteristics are also evaluated.

Opportunity↗