SEARCH · Search NASA

Results for “Mars Ocean”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS2019

The 1997 Mars Pathfinder Spacecraft Landing Site: Spillover Deposits from an Early Mars Inland Sea

The Martian outflow channels comprise some of the largest known channels in the Solar System. Remote-sensing investigations indicate that cataclysmic floods likely excavated the channels ~3.4 Ga. Previous studies show that, in the southern circum-Chryse region, their flooding pathways include hundreds of kilometers of channel floors with upward gradients. However, the impact of the reversed channel-floor topography on the cataclysmic floods remains uncertain. Here, we show that these channel floors occur within a vast basin, which separates the downstream reaches of numerous outflow channels from the northern plains. Consequently, floods propagating through these channels must have ponded, producing an inland sea, before reaching the northern plains as enormous spillover discharges. The resulting paleohydrological reconstruction reinterprets the 1997 Pathfinder landing site as part of a marine spillway, which connected the inland sea to a hypothesized northern plains ocean. Our flood simulation shows that the presence of the sea would have permitted the propagation of low-depth floods beyond the areas of reversed channel-floor topography. These results explain the formation at the landing site of possible fluvial features indicative of flow depths at least an order of magnitude lower than those apparent from the analyses of orbital remote-sensing observations.

J. A. P. Rodriguez↗

DOE OSTI2026

Hacking Kilometer-Scale Models: A Participative Model for Climate Information

In May 2025, nearly 700 participants from all around the world coalesced at 10 regional nodes and a few satellite nodes to take part in a global hackathon of kilometer-scale (horizontal grid spacing < 10 km) regional and global Earth system models. Exciting science is emerging from these efforts, ranging across novel model analysis, new ways of integrating with satellite data, and emulation with machine learning. New technologies were trialed that enable the community to work in new and complementary ways to democratize access to global information at a local scale from a set of the world’s highest-resolution climate models. The hackathon demonstrated how exascale data can be organized to be accessible to anyone. Fundamentally, the community could apply these techniques and technologies to move toward more participative models for coproduction and delivery of diverse sources of climate information for climate scientists and citizens alike.

Climate models↗

NASA NTRS2003

Planetary Protection Considerations for JIMO

Europa is the only body in the solar system besides Mars that is currently viewed as a body of significant interest relative to the process of chemical evolution and/or the origin of life or for which scientific opinion provides a significant chance of contamination which could jeopardize a future biological experiment. Thus, both NASA and COSPAR policy require that Europa be protected from biological contamination that could result from scientific exploration conducted by robotic spacecraft. In 2000, the Task Group on the Forward Contamination of Europa (Space Studies Board) published its report on Preventing the Forward Contamination of Europa recommending a limit of 10(exp -4) probability of contamination of Europa's ocean per mission (at any time in the future) by a single viable terrestrial microbe. While NASA guidelines do not yet explicitly reflect this new recommendation, it is likely that the SSB recommendation will be adopted by NASA planetary protection in the form of a sterility requirement or at least a stringent total microbial burden requirement. In our presentation, we will present an overview of the anticipated planetary protection requirements for both orbiters and landers destined for Europa and some of the challenges these requirements will present.

Koukol, R. C.↗

NASA NTRSDate not supplied

In Situ Geochronology for the Next Decade

Geochronology, or determination of absolute ages for geologic events, underpins many inquiries into the formation and evolution of planets and our Solar System. The bombardment chronology inferred from lunar samples has played a significant role in the development of models of early Solar System and extrasolar planet dynamics, as well as the timing of volatile, organic, and siderophile element delivery. Absolute ages of ancient and recent magmatic products provide strong constraints on the dynamics of magma oceans and crustal formation, and the longevity and evolution of interior heat engines and distinct mantle/crustal source regions. Absolute dating also relates habitability markers to the timescale of evolution of life on Earth. The number of geochronologically-significant terrains across the inner Solar System far exceeds our ability to conduct sample return to all of them. Therefore NASA has invested in the development of in situ dating techniques; several such instruments will be TRL 6 by the time of the next Decadal Survey. We formulated a set of medium-class (New Frontiers) mission concepts to three different locations (the Moon, Mars, and Vesta) with a notional payload consisting of the CDEX and KArLE instruments to measure radiometric ages, an imaging spectrometer and optical cameras to provide site geologic context and sample characterization, an ICP-MS to augment sample contextualization, and a sample acquisition and handling system. A Vesta hopper and single-site lunar and Mars landers to advance Solar System chronology fit into the New Frontiers cost cap in our study. Such missions would also enable a broad suite of geologic investigations such as basic geologic characterization, geomorphologic analysis, establishing ground truth for remote sensing analyses, analyses of major, minor, trace, and volatile elements, atmospheric and other long-lived monitoring, organic molecule analyses, and soil and geotechnical properties.

Barbara A Cohen↗

NASA NTRS2010

Biogeochemical Activity of Siderophilic Cyanobacteria and Insights from their Genomes Implications for the Development of New Biosignatures

Verifying the links between genomie features in living organisms and their mineralization/demineralization activity will help to reveal traces of life on Earth and beyond. Among contemporary environments, iron-depositing hot springs (IDHS) may represent one of the most appropriate natural models for insights into ancient life since organisms may have originated on Earth and possibly Mars in association with hydrothennal activity and high [Fe(2+)]. Siderophilic or "iron-loving" cyanobacteria (CB) inhabiting IDHS may have genomic features and properties similar to those of ancient organisms because abundant Fe(2+) in IDHS has a strong potential to increase the magnitude of oxidative stress. That is why specific and/or additional proteins involved in Fe mineralization by siderophilic CB are expected. Inorganic polyphosphates (PPi) are known to increase the viability of prokaryotes Linder heavy metal concentrations and UV stress conditions. PPi have also been proposed as biosignatures. Ancient CB could have also been stressed by occasional migrations from the Fe(2+) rich Ocean to the basaltic land which was almost devoid of dissolved Fe(2+). Thus, the study of the adaptation reactions of siderophilic CB to fluctuation of dissolved Fe level may shed light on the paleophysiology of ancient oxygenic prokaryotes. Moreover, bioweathered Fe, Al, P, Cu, Ti and rare earth elements can be thought of as candidate organomarkers that document the effects of or ganic molecules in weathered rocks. However, the molecular mechanisms of the maintenance of Fe homeostasis in siderophilic CB, the role of PPi for this process and bioweathering activities are poorly understood. Here we present preliminary results describing a new mechanism of Fe mineralization in siderophilic CB, the effect of Fe on the generation of PPi bodies in siderophilic CB, their bioweathering activity and preliminary analysis of the diversity of proteins involved in the prevention of oxidative stress in phototrophs inhabiting IDHS.

Brown, I. I.↗

NASA NTRS1989

The geological record of life 3500 Ma ago: Coping with the rigors of a young earth during late accretion

Thin cherty sedimentary layers within the volcanic portions of the 3,500 to 3,300 Ma-old Onverwacht and Fig Tree Groups, Barberton Greenstone belt, South Africa, and Warrawoona Group, eastern Pilbara Block, Western Australia, contain an abundant record of early Archean life. Five principal types of organic and probably biogenic remains and or structures can be identifed: stromatolites, stromatolite detritus, carbonaceous laminite or flat stromalite, carbonaceous detrital particles, and microfossils. Early Archean stromatolites were reported from both the Barberton and eastern Pilbara greenstone belts. Systematic studies are lacking, but two main morphological types of stromatolites appear to be represented by these occurrences. Morphology of the stromalites is described. Preserved early Archean stromatolites and carbonaceous matter appear to reflect communities of photosynthetic cyanobacteria inhabiting shallow, probably marine environments developed over the surfaces of low-relief, rapidly subsiding, simatic volcanic platforms. The overall environmental and tectonic conditions were those that probably prevailed at Earth's surface since the simatic crust and oceans formed sometime before 3,800 Ma. Recent studies also suggest that these early Archean sequences contain layers of debris formed by large-body impacts on early Earth. If so, then these early bacterial communities had developed strategies for coping with the disruptive effects of possibly globe-encircling high-temperature impact vapor clouds, dust blankets, and impact-generated tsunamis. It is probable that these early Archean biogenic materials represent organic communities that evolved long before the beginning of the preserved geological record and were well adapted to the rigors of life on a young, volcanically active Earth during late bombardment. These conditions may have had parallels on Mars during its early evolution.

Lowe, Donald R.↗

NASA NTRS1990

Application of the inner solar system cratering record to the Earth

The cratering records on the Moon, Mercury, and Mars are studied to provide constraints on: (1) terrestrial conditions prior to about 3.8 Ga, (2) why biology was not extensively established prior to 3.5 Ga, (3) whether impact-induced volcanism can explain some feature of the Cretaceous/Tertiary boundary event, and (4) how common large single-impact events are in the inner solar system. Earth underwent a period of high impact rates and large basin-forming events early in its history, based on the cratering record retained in the Lunar, Mercurian, and Martian highlands. The widespread occurrence of life around 3.5 Ga is linked to the cessation of high impact rates. Impact of a 10-km-diam object into terrestrial oceans could excavate through crustal material and into mantle reservoirs, creating extended basaltic volcanic activity. Scaling laws, coupled with the record retained on Lunar and Martian plains, indicate that between one and seven craters of 90 km diam or greater could have formed on Earth in the past 65 million years.

Barlow, Nadine G.↗

NASA NTRS2017

Station Keeping with an Autonomous Underwater Glider Using a Predictive Model of Ocean Currents

We investigate the use of an autonomous underwater glider as a platform for a virtual mooring. Our approach uses a simple vehicle motion model, a predictive model of ocean currents, and a greedy search algorithm in order to simulate possible actions available to the vehicle and select an action to minimize the distance from the target point. Results from a 19 day experiment in October 2016 near Monterey Bay are presented where we test our control algorithm as well as investigate the effect of a glider’s dive profile on its ability to act as a virtual mooring.

Chien, Steve↗

NASA NTRS2017

Design and Development of the Heat Redistribution System for the Mission to Europa Spacecraft:

This paper details the conceptual design of the Heat Redistribution System (HRS) used for thermal control of the Europa Clipper spacecraft. The solar powered spacecraft will launch in the early 2020s and will study Jupiter’s Icy moon, Europa, where previous investigations have indicated the possibility of a liquid water ocean underneath its ice-encrusted surface. The spacecraft will execute multiple flybys of Europa while relying on the HRS for thermal control of the spacecraft bus. The HRS utilizes a Mechanically Pumped Fluid Loop (MPFL) to reclaim waste heat from an avionics and payload electronics compartment and redistribute it to other parts of the spacecraft, such as the propulsion module structure and the louver-radiator assembly. A “replacement heater block” provides supplemental heat when needed to maintain the spacecraft hardware above its allowable flight temperatures. Additionally, a set of thermal control valves autonomously actuate to reduce the fluid flow through the radiator during cold environment cases. The HRS was used in previous flight projects at JPL such as Mars Science Laboratory, but the uniqueness of the Europa Clipper mission has mandated changes to previous HRS designs; the most significant design drivers and design changes for this iteration of the HRS are discussed.

Bertagne, Christopher↗

NASA NTRS1994

The Greenhouse and Anti-Greenhouse Effects on Titan

Titan is the largest moon of Saturn and is the only moon in the solar system with a substantial atmosphere. Its atmosphere is mostly made of nitrogen, with a few percent CH4, 0.1% H2 and an uncertain level of Ar (less than 10%). The surface pressure is 1.5 atms and the surface temperature is 95 K, decreasing to 71 at the tropopause before rising to stratospheric temperatures of 180 K. In pressure and composition Titan's atmosphere is the closest twin to Earth's. The surface of Titan remains unknown, hidden by the thick smog layer, but it may be an ocean of liquid methane and ethane. Titan's atmosphere has a greenhouse effect which is much stronger than the Earth's - 92% of the surface warming is due to greenhouse radiation. However an organic smog layer in the upper atmosphere produces an anti-greenhouse effect that cuts the greenhouse warming in half - removing 35% of the incoming solar radiation. Models suggest that during its formation Titan's atmosphere was heated to high temperatures due to accretional energy. This was followed by a cold Triton-like period which gradually warmed to the present conditions. The coupled greenhouse and haze anti-greenhouse may be relevant to recent suggestions for haze shielding of a CH4 - NH3 early atmosphere on Earth or Mars. When the NASA/ESA mission to the Saturn System, Cassini, launches in a few years it will carry a probe that will be sent to the surface of Titan and show us this world that is strange and yet in many ways similar to our own.

McKay, C. P.↗

NASA NTRS2005

On large outflows of Arctic sea ice into the Barents Sea

Winter outflows of Arctic sea ice into the Barents Sea are estimated using a 10-year record of satellite ice motion and thickness. The mean winter volume export through the Svalbard/Franz Josef Land passage is 40 km3, and ranges from -280 km3 to 340 km3. A large outflow in 2003 is preconditioned by an unusually high concentration of thick perennial ice over the Nansen Basin at the end of the 2002 summer. With a deep atmospheric low situated over the eastern Barents Sea in winter, the result is an increased export of Arctic ice. The Oct-Mar ice area flux, at 110 x 10 to the third power km3, is not only unusual in magnitude but also remarkable in that >70% of the area is multiyear ice; the ice volume flux at~340 km3 is almost one-fifth of the ice flux through the Fram Strait. Another large outflow of Arctic sea ice through this passage, comparable to that in 2003, is found in 1996. This southward flux of sea ice represents one of two major sources of freshwater in the Barents Sea; the other is the eastward flux of water via the Norwegian Coastal Current. The possible consequences of variable freshwater input on the Barents Sea hydrography and its impact on transformation of Atlantic Water en route to the Arctic Ocean are examined with a 25-year coupled ice-ocean model.

Artic ice↗

DOE OSTI2025

VISIONARY: Virtual Intelligence System for Optimizing Novel Analytical Research Yields

VISIONARY is an AI system that accelerates energy materials discovery by automatically generating hypotheses about structure-property relationships. It analyzes patterns in materials data, identifies promising correlations, and proposes testable scientific hypotheses without human intervention. By streamlining this reasoning process, VISIONARY helps researchers efficiently identify candidate materials with desired properties, significantly speeding up the materials development pipeline for energy applications. During the project, we developed a standalone application. The application uses a combination of papers provided by the user and data collected from FutureHouse’s dataset to build an understanding of the background that the user wants to explore for the hypothesis.

36 MATERIALS SCIENCE↗

NASA NTRS2016

Mapping in the Northern Martian Plains: A Renewed Survey of the Acidalia Mensae and Colles Regions

Acidalia Mensae is an oblong field of tilted mesas roughly trending east-west, with Acidalia Colles encompassing a regime of knobby terrain trending northeast from the center of the mesa region. Each province extends for approximately 300km in their respective directions in the heart of the vast plains of Acidalia Planitia. As part of efforts in the 1980s targeting evidences for a putative northern Martian paleo-ocean – manifesting itself most notably in geologic maps of quadrangles in East Acidalia – the Acidalia Mensae region was selected and divided into three quadrangles ranging across 26.8 deg W to 36 deg W and 47.5 deg N to 52.5 deg N. The region was then mapped at a 1:1,000,000 scale using Canvas on a Viking base map. We present an updated draft of this document converted into ArcMap, including a completed fourth quadrangle that covers the bulk of the Acidalia Colles region. Previously mapped units have been updated according to the availability of new higher-resolution data – particularly, Thermal Emission Imaging System (THEMIS) Day Infrared (IR) data as a base map, paired with supporting Context Camera (CTX) and High Resolution Stereo Camera (HRSC) HRSC stamps extracted from the Mars Orbital Data Explorer repository. Geologic units and contacts for the mesa and knob regimes, interstitial alluvial units and the surrounding plains are comprehensively presented alongside lower-level features such as levels (hypothesized to be shorelines) and pitted cones (putative pingos). The project was mapped in a transverse Mercator projection. Upon minor revision, the map is to be submitted to the USGS for publication.

Siwabessy, Andrew G.↗

NASA NTRS2019

Sampling tool concepts for Enceladus Lander in-situ analysis

A potential future in-situ lander mission to the surface of Enceladus could be the lowest cost mission to determine if life exists beyond Earth since material from the subsurface ocean, where the presence of hydrothermal activity has been strongly suggested by the Cassini mission, is available on its surface after being ejected by plumes and then settling on the surface. In addition, the low radiation environment of Enceladus would not significantly alter the chemical makeup of samples recently deposited on the surface. A study was conducted to explore various sampling devices that could be used by an in-situ lander mission to provide 1cc to 5cc volume samples to instruments. In addition to temperature and vacuum environmental conditions, the low surface gravity of Enceladus (1% of Earth gravity) represents a new challenge for surface sampling that is not met by sampling systems developed for microgravity (e.g., comets and asteroids) or higher gravity (e.g., Europa 13%g, Moon 16%g, or Mars 38%g) environments. It is desired to acquire surface plume material that has accumulated in the top 1cm to ensure acquisition of the least processed material. Several sampling devices were developed or adapted and then tested in simulated conditions that resemble the Enceladus surface properties. These devices and test results are presented in this paper.

Genta, Giancarlo↗

NASA NTRSDate not supplied

Composite Technologies for Science Missions

ASTROLAB, Lunar Geophysical Network, Mars Icebreaker and Mars PLACER Net missions propose use of various types of vehicles – such as rovers, landers and flying probes - to accomplish their scientific objectives. Although designs for such vehicles are myriad, many structural components can be made using composite manufacturing technologies. Composite materials are also myriad, by nature, but carbon fiber reinforced polymers (CFRP) in particular are sought after for their high specific strength and specific stiffness. CFRP components could be especially beneficial in vehicle designs for Moon or Mars missions due to their nearly negligible coefficient of thermal expansion (CTE). CTE is a critical design characteristics in environments where significant thermal swings are prevalent, such as those of atmosphere-less Moon and Mars.MSFC/EM42 houses several relevant composites technologies. Strong and rigid struts can be filament-wound. Shells and platforms can be laid-up using automated fiber placement (for repeatability) or by hand (for small features). Monolithic structures can even be designed to reduce part count and therefore reduce the risk of joint failures. Composites are also tailorable, allowing the incorporation of different material types or formats through the thickness of a part. This includes materials which shield from radiation or electrostatic discharge. Finally, the rigidity of composite parts minimizes overall vibration and compliance within a design.Additionally, missions such as Triton Ocean World Surveyor anticipate use of traditional, metallic fuel tanks. Composite overwrapped pressure vessels (COPVs) are suitable for use in this application as well. The Triton mission even cites a concern for heat retention, for which CFRP also offers improved characteristics over traditional metallic tanks.

Lightweight↗

NASA NTRS1998

Measuring Thermal Conductivity and Moisture Absorption of Cryo-Insulation Materials

NASA is seeking to develop thermal insulation material systems suitable for withstanding both extremely high temperatures encountered during atmospheric re-entry heating and aero- braking maneuvers, as well as extremely low temperatures existing in liquid fuel storage tanks. Currently, materials used for the high temperature insulation or Thermal Protection System (TPS) are different from the low temperature, or cryogenic insulation. Dual purpose materials are necessary to the development of reusable launch vehicles (RLV). The present Space Shuttle (or Space Transportation System, STS) employs TPS materials on the orbiter and cryo-insulation materials on the large fuel tank slung under the orbiter. The expensive fuel tank is jettisoned just before orbit is achieved and it burns up while re-entering over the Indian Ocean. A truly completely reusable launch vehicle must store aR cryogenic fuel internally. The fuel tanks will be located close to the outer surface. In fact the outer skin of the craft will probably also serve as the fuel tank enclosure, as in jet airliners. During a normal launch the combined TPS/cryo-insulation system will serve only as a low temperature insulator, since aerodynamic heating is relatively minimal during ascent to orbit. During re-entry, the combined TPS/cryo-insulation system will serve only as a high temperature insulator, since all the cryogenic fuel will have been expended in orbit. However, in the event of an.aborted launch or a forced/emergency early re-entry, the tanks will still contain fuel, and the TPS/cryo-insulation will have to serve as both low and high temperature insulation. Also, on long duration missions, such as to Mars, very effective cryo-insulation materials are needed to reduce bod off of liquid propellants, thereby reducing necessary tankage volume, weight, and cost. The conventional approach to obtaining both low and high temperature insulation, such as is employed for the X-33 and X-34 spacecraft, is to use separate TPS and cryo-insulation materials, which are connected by means of adhesives or stand-offs (spacers). Three concepts are being considered: (1) the TPS is bonded directly to the cryo-insulation which, in turn, is bonded to the exterior of the tank, (2) stand-offs are used to make a gap between the TPS and the cryo-insulation, which is bonded externally to the tank, (3) TPS is applied directly or with stand-offs to the exterior so the tank, and cryo-insulation is applied directly to the interior of the tank. Many potential problems are inherent in these approaches. For example, mismatch between coefficients of thermal expansion of the TPS and cryo-insulation, as well as aerodynamic loads, could lead to failure of the bond. Internal cryo-insulation must be prevent from entering the sump of the fuel turbo-pump. The mechanical integrity of the stand-off structure (if used) must withstand multiple missions. During ground hold (i.e., prior to launch) moisture condensation must be minimized in the gap between the cryo-insulation and the TPS. The longer term solution requires the development of a single material to act as cryo- insulation during ground hold and as TPS during re-entry. Such a material minimizes complexity and weight while improving reliability and reducing cost.

Lambert, Michael A.↗

NASA NTRS2003

Nuclear Electric Propulsion for Outer Space Missions

Today we know of 66 moons in our very own Solar System, and many of these have atmospheres and oceans. In addition, the Hubble (optical) Space Telescope has helped us to discover a total of 100 extra-solar planets, i.e., planets going around other suns, including several solar systems. The Chandra (X-ray) Space Telescope has helped us to discover 33 Black Holes. There are some extremely fascinating things out there in our Universe to explore. In order to travel greater distances into our Universe, and to reach planetary bodies in our Solar System in much less time, new and innovative space propulsion systems must be developed. To this end NASA has created the Prometheus Program. When one considers space missions to the outer edges of our Solar System and far beyond, our Sun cannot be relied on to produce the required spacecraft (s/c) power. Solar energy diminishes as the square of the distance from the Sun. At Mars it is only 43% of that at Earth. At Jupiter, it falls off to only 3.6% of Earth's. By the time we get out to Pluto, solar energy is only .066% what it is on Earth. Therefore, beyond the orbit of Mars, it is not practical to depend on solar power for a s/c. However, the farther out we go the more power we need to heat the s/c and to transmit data back to Earth over the long distances. On Earth, knowledge is power. In the outer Solar System, power is knowledge. It is important that the public be made aware of the tremendous space benefits offered by Nuclear Electric Propulsion (NEP) and the minimal risk it poses to our environment. This paper presents an overview of the reasons for NEP systems, along with their basic components including the reactor, power conversion units (both static and dynamic), electric thrusters, and the launch safety of the NEP system.

Barret, Chris↗

NASA NTRS1993

Thermal and hydraulic considerations regarding the fate of water discharged by the outflow channels to the Martian northern plains

The identification of possible shorelines in the Martian northern plains suggests that the water discharged by the circum-Chryse outflow channels may have led to the formation of transient seas, or possibly even an ocean, covering as much as one-third of the planet. Speculations regarding the possible fate of this water have included local ponding and reinfiltration into the crust; freezing, sublimation, and eventual cold-trapping at higher latitudes; or the in situ survival of this now frozen water to the present day -- perhaps aided by burial beneath a protective cover of eolian sediment or lavas. Although neither cold-trapping at higher latitudes nor the subsequent freezing and burial of flood waters can be ruled out, thermal and hydraulic considerations effectively eliminate the possibility that any significant reassimilation of this water by local infiltration has occurred given climatic conditions resembling those of today. The arguments against the local infiltration of flood water into the northern plains are two-fold. First, given the climatic and geothermal conditions that are thought to have prevailed on Mars during the Late Hesperian (the period of peak outflow channel activity in the northern plains), the thickness of the cryosphere in Chryse Planitia is likely to have exceeded 1 km. A necessary precondition for the widespread occurrence of groundwater is that the thermodynamic sink represented by the cryosphere must already be saturated with ice. For this reason, the ice-saturated cryosphere acts as an impermeable barrier that effectively precludes the local resupply of subpermafrost groundwater by the infiltration of water discharged to the surface by catastraphic floods. Note that the problem of local infiltration is not significantly improved even if the cryosphere were initially dry, for as water attempts to infiltrate the cold, dry crust, it will quickly freeze, creating a seal that prevents any further infiltration from the ponded water above. The second argument against the local infiltration of flood water in the northern plains is based on hydraulic considerations. Repeated impacts have likely brecciated the Martian crust down to a depth of roughly 10 km. Given a value of permeability no greater than that inferred for the top 10 km of the Earth's crust (approximately 10(exp -2) darcies), a timescale as much as a billion years or more for the Martian groundwater system to achieve hydrostatic equilibrium, and the approximately 2-4 km elevation difference between the outflow channel source regions and the northern plains, the water confined beneath the frozen crust of the northern plains should have been under a significant hydraulic head. Thus, the existence of a hydraulic pathway between the ponded flood waters above the northern plains and the confined aquifer lying beneath it would not have led to the infiltration of flood water back into the crust, but rather the additional expulsion of groundwater onto the surface.

Clifford, S. M.↗