Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mathematical Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Resolution of the 1D regularized Burgers equation using a spatial wavelet approximation

The Burgers equation with a small viscosity term, initial and periodic boundary conditions is resolved using a spatial approximation constructed from an orthonormal basis of wavelets. The algorithm is directly derived from the notions of multiresolution analysis and tree algorithms. Before the numerical algorithm is described these notions are first recalled. The method uses extensively the localization properties of the wavelets in the physical and Fourier spaces. Moreover, the authors take advantage of the fact that the involved linear operators have constant coefficients. Finally, the algorithm can be considered as a time marching version of the tree algorithm. The most important point is that an adaptive version of the algorithm exists: it allows one to reduce in a significant way the number of degrees of freedom required for a good computation of the solution. Numerical results and description of the different elements of the algorithm are provided in combination with different mathematical comments on the method and some comparison with more classical numerical algorithms.

Liandrat, J.↗
NASA NTRS1972

Hydrodynamic water impact

The hydrodynamic impact of a falling body upon a viscous incompressible fluid was investigated by numerically solving the equations of motion. Initially the mathematical model simulated the axisymmetric impact of a rigid right circular cylinder upon the initially quiescent free surface of a fluid. A compressible air layer exists between the falling cylinder and the liquid free surface. The mathematical model was developed by applying the Navier-Stokes equations to the incompressible air layer and the incompressible fluid. Assuming the flow to be one dimensional within the air layer, the average velocity, pressure and density distributions were calculated. The liquid free surface was allowed to deform as the air pressure acting on it increases. For the liquid the normalized equations were expressed in two-dimensional cylindrical coordinates. The governing equations for the air layer and the liquid were expressed in finite difference form and solved numerically. For the liquid a modified version of the Marker-and-Cell method was used. The mathematical model has been reexamined and a new approach has recently been initiated. Essentially this consists of examining the impact of an inclined plate onto a quiesent water surface with the equations now formulated in cartesian coordinates.

Kettleborough, C. F.↗
NASA NTRS1991

Identification of linear multivariable systems from a single set of data by identification of observers with assigned real eigenvalues

A formulation is presented for identification of linear multivariable from a single set of input-output data. The identification method is formulated with the mathematical framework of learning identifications, by extension of the repetition domain concept to include shifting time intervals. This method contrasts with existing learning approaches that require data from multiple experiments. In this method, the system input-output relationship is expressed in terms of an observer, which is made asymptotically stable by an embedded real eigenvalue assignment procedure. Through this relationship, the Markov parameters of the observer are identified. The Markov parameters of the actual system are recovered from those of the observer, and then used to obtain a state space model of the system by standard realization techniques. The basic mathematical formulation is derived, and numerical examples presented to illustrate.

Phan, Minh↗
NASA NTRS2012

Model-Based Method for Sensor Validation

Fault detection, diagnosis, and prognosis are essential tasks in the operation of autonomous spacecraft, instruments, and in situ platforms. One of NASA s key mission requirements is robust state estimation. Sensing, using a wide range of sensors and sensor fusion approaches, plays a central role in robust state estimation, and there is a need to diagnose sensor failure as well as component failure. Sensor validation can be considered to be part of the larger effort of improving reliability and safety. The standard methods for solving the sensor validation problem are based on probabilistic analysis of the system, from which the method based on Bayesian networks is most popular. Therefore, these methods can only predict the most probable faulty sensors, which are subject to the initial probabilities defined for the failures. The method developed in this work is based on a model-based approach and provides the faulty sensors (if any), which can be logically inferred from the model of the system and the sensor readings (observations). The method is also more suitable for the systems when it is hard, or even impossible, to find the probability functions of the system. The method starts by a new mathematical description of the problem and develops a very efficient and systematic algorithm for its solution. The method builds on the concepts of analytical redundant relations (ARRs).

Vatan, Farrokh↗
NASA NTRS2010

Empirical Method to Estimate Hydrogen Embrittlement of Metals as a Function of Hydrogen Gas Pressure at Constant Temperature

High pressure Hydrogen (H) gas has been known to have a deleterious effect on the mechanical properties of certain metals, particularly, the notched tensile strength, fracture toughness and ductility. The ratio of these properties in Hydrogen as compared to Helium or Air is called the Hydrogen Environment Embrittlement (HEE) Index, which is a useful method to classify the severity of H embrittlement and to aid in the material screening and selection for safety usage H gas environment. A comprehensive world-wide database compilation, in the past 50 years, has shown that the HEE index is mostly collected at two conveniently high H pressure points of 5 ksi and 10 ksi near room temperature. Since H embrittlement is directly related to pressure, the lack of HEE index at other pressure points has posed a technical problem for the designers to select appropriate materials at a specific H pressure for various applications in aerospace, alternate and renewable energy sectors for an emerging hydrogen economy. Based on the Power-Law mathematical relationship, an empirical method to accurately predict the HEE index, as a function of H pressure at constant temperature, is presented with a brief review on Sievert's law for gas-metal absorption.

Lee, Jonathan A.↗
NASA NTRS1991

Identification of linear multivariable systems from a single set of data by identification of observers with assigned real eigenvalues

This paper presents a formulation for identification of linear multivariable systems from a single set of input-output data. The identification method is formulated with the mathematical framework of learning identification, by extension of the repetition domain concept to include shifting time intervals. This contrasts existing learning approaches that require data from multiple experiments. In this method, the system input-output relationship is expressed in terms of an observer, which is made asymptotically stable by an embedded real eigenvalue assignment procedure. Through this relationship, the Markov parameters of the observer are identified. The Markov parameters of the actual system are recovered from those of the observer, and then used to obtain a state space model of the system by standard realization techniques. The basic mathematical formulation is derived, and numerical examples presented to illustrate the proposed method.

Phan, Minh↗
NASA NTRS1972

Sunspot analysis and prediction

Evaluation of several procedures that apply rarely used and exotic mathematical functions yields a unique method of application of common trigonometric functions. These functions appear to produce results in the development of a mathematical model capable of describing all available sunspot data.

Source record↗
NASA NTRS1985

A Uniform Subdivision Method for Triangular Bezier Patches

A subdivision method for Bezier triangles is presented that parallels the development of Lane-Riesenfeld for Bezier Curves. The method is developed from the mathematical description of the patch, and the resulting algorithm does not require evaluation of the blending functions. This method subdivides the triangle uniformly so that the lengths of the sides of the subtriangles are uniformly reduced. This method is a member of the class of methods first presented by Goldman, which contain subdivision methods that arise from degenerate subdivision of Bezier tetrahedra. It is shown that a certain method is a natural extension of the Lane-Riesenfeld results for Bezier curves.

Joy, K. I.↗
NASA NTRS2017

Cause and Cure-Deterioration in Accuracy of CFD Simulations with Use of High-Aspect-Ratio Triangular/Tetrahedral Grids

In the multi-dimensional space-time conservation element and solution element16 (CESE) method, triangles and tetrahedral mesh elements turn out to be the most natural building blocks for 2D and 3D spatial grids, respectively. As such, the CESE method is naturally compatible with the simplest 2D and 3D unstructured grids and thus can be easily applied to solve problems with complex geometries. However, because (a) accurate solution of a high-Reynolds number flow field near a solid wall requires that the grid intervals along the direction normal to the wall be much finer than those in a direction parallel to the wall and, as such, the use of grid cells with extremely high aspect ratio (103 to 106) may become mandatory, and (b) unlike quadrilateral hexahedral grids, it is well-known that accuracy of gradient computations involving triangular tetrahedral grids tends to deteriorate rapidly as cell aspect ratio increases. As a result, the use of triangular tetrahedral grid cells near a solid wall has long been deemed impractical by CFD researchers. In view of (a) the critical role played by triangular tetrahedral grids in the CESE development, and (b) the importance of accurate resolution of high-Reynolds number flow field near a solid wall, as will be presented in the main paper, a comprehensive and rigorous mathematical framework that clearly identifies the reasons behind the accuracy deterioration as described above has been developed for the 2D case involving triangular cells. By avoiding the pitfalls identified by the 2D framework, and its 3D extension, it has been shown numerically.

CFD↗
NASA NTRS2003

New Technique of High-Performance Torque Control Developed for Induction Machines

Two forms of high-performance torque control for motor drives have been described in the literature: field orientation control and direct torque control. Field orientation control has been the method of choice for previous NASA electromechanical actuator research efforts with induction motors. Direct torque control has the potential to offer some advantages over field orientation, including ease of implementation and faster response. However, the most common form of direct torque control is not suitable for the highspeed, low-stator-flux linkage induction machines designed for electromechanical actuators with the presently available sample rates of digital control systems (higher sample rates are required). In addition, this form of direct torque control is not suitable for the addition of a high-frequency carrier signal necessary for the "self-sensing" (sensorless) position estimation technique. This technique enables low- and zero-speed position sensorless operation of the machine. Sensorless operation is desirable to reduce the number of necessary feedback signals and transducers, thus improving the reliability and reducing the mass and volume of the system. This research was directed at developing an alternative form of direct torque control known as a "deadbeat," or inverse model, solution. This form uses pulse-width modulation of the voltage applied to the machine, thus reducing the necessary sample and switching frequency for the high-speed NASA motor. In addition, the structure of the deadbeat form allows the addition of the high-frequency carrier signal so that low- and zero-speed sensorless operation is possible. The new deadbeat solution is based on using the stator and rotor flux as state variables. This choice of state variables leads to a simple graphical representation of the solution as the intersection of a constant torque line with a constant stator flux circle. Previous solutions have been expressed only in complex mathematical terms without a method to clearly visualize the solution. The graphical technique allows a more insightful understanding of the operation of the machine under various conditions.

Kenny, Barbara H.↗
NASA NTRS1972

The effect of multiple encounters on short period comet orbits

The observed orbital elements of short period comets are found to be consistent with the hypothesis of derivation from long period comets as long as two assumptions are made. First, the distribution of short period comets has been randomized by multiple encounters with Jupiter and second, the short period comets have lower velocities of encounter with Jupiter than is generally expected. Some 16% of the observed short period comets have lower encounter velocities than is allowed mathematically using Laplace's method. This may be due to double encounter processes with Jupiter and Saturn, or as a result of prolonged encounters. The distribution of unobservable short period comets can be inferred in part from the observed comets. Many have orbits between Jupiter and Saturn with somewhat higher inclinations than those with perihelions near the earth. Debris from those comets may form the major component of the zodiacal dust.

Lowrey, B. E.↗
NASA NTRS1972

A critical discussion of theories of flame spread across solid and liquid fuels.

Mathematical descriptions of flames spreading over liquid and solid fuels are obtained, using basic assumptions derived from observations or physical reasoning. A review of existing theories shows that they are incomplete in that they either treat an uncoupled problem of the condensed phase where the spreading rate and heat flux at the surface are given, or they merely determine the spreading rate in terms of a new vaguely defined eigenvalue. An important difference between the liquid and solid cases, due to convection, is pointed out, and it is shown that solid-fuel flame-spread theories which claim to apply to the liquid case, in reality do not apply to it. A mathematical formulation and a method of solution are presented for the phenomenon of flame spread over solid fuels with forward heat conduction in both the solid and the gas. The method uses an energy integral over the field to determine the spreading rate in terms of the basic properties of the fuel and air.

Sirignano, W. A.↗
NASA NTRS1973

The effect of multiple encounters on short-period comet orbits.

The observed orbital elements of short-period comets are found to be consistent with the hypothesis of derivation from long-period comets as long as two assumptions are made. First, the distribution of short-period comets has been randomized by multiple encounters with Jupiter and second, the short-period comets have low velocities of encounter with Jupiter. Some 16% of the observed short-period comets have lower encounter velocities than is allowed mathematically using Laplace's method. This may be due to double-encounter processes with Jupiter and Saturn. The distribution of unobservable short-period comets can be inferred in part from the observed comets. It is shown that there may be many short-period comets having orbits between Jupiter and Saturn with somewhat higher inclinations than those with perihelia near the earth.

Lowrey, B. E.↗
NASA NTRS1973

Synthesis of vibration dampers

A method which uses a mathematical accelerometer is proposed for determining the 3rd derivative of the displacement in shock absorbers.

Kamayev, V. A.↗