Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mesh refinement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Incremental triangulation by way of edge swapping and local optimization

This document is intended to serve as an installation, usage, and basic theory guide for the two dimensional triangulation software 'HARLEY' written for the Silicon Graphics IRIS workstation. This code consists of an incremental triangulation algorithm based on point insertion and local edge swapping. Using this basic strategy, several types of triangulations can be produced depending on user selected options. For example, local edge swapping criteria can be chosen which minimizes the maximum interior angle (a MinMax triangulation) or which maximizes the minimum interior angle (a MaxMin or Delaunay triangulation). It should be noted that the MinMax triangulation is generally only locally optical (not globally optimal) in this measure. The MaxMin triangulation, however, is both locally and globally optical. In addition, Steiner triangulations can be constructed by inserting new sites at triangle circumcenters followed by edge swapping based on the MaxMin criteria. Incremental insertion of sites also provides flexibility in choosing cell refinement criteria. A dynamic heap structure has been implemented in the code so that once a refinement measure is specified (i.e., maximum aspect ratio or some measure of a solution gradient for the solution adaptive grid generation) the cell with the largest value of this measure is continually removed from the top of the heap and refined. The heap refinement strategy allows the user to specify either the number of cells desired or refine the mesh until all cell refinement measures satisfy a user specified tolerance level. Since the dynamic heap structure is constantly updated, the algorithm always refines the particular cell in the mesh with the largest refinement criteria value. The code allows the user to: triangulate a cloud of prespecified points (sites), triangulate a set of prespecified interior points constrained by prespecified boundary curve(s), Steiner triangulate the interior/exterior of prespecified boundary curve(s), refine existing triangulations based on solution error measures, and partition meshes based on the Cuthill-McKee, spectral, and coordinate bisection strategies.

Wiltberger, N. Lyn↗
NASA NTRS2000

A Domain-Decomposed Multilevel Method for Adaptively Refined Cartesian Grids with Embedded Boundaries

Preliminary verification and validation of an efficient Euler solver for adaptively refined Cartesian meshes with embedded boundaries is presented. The parallel, multilevel method makes use of a new on-the-fly parallel domain decomposition strategy based upon the use of space-filling curves, and automatically generates a sequence of coarse meshes for processing by the multigrid smoother. The coarse mesh generation algorithm produces grids which completely cover the computational domain at every level in the mesh hierarchy. A series of examples on realistically complex three-dimensional configurations demonstrate that this new coarsening algorithm reliably achieves mesh coarsening ratios in excess of 7 on adaptively refined meshes. Numerical investigations of the scheme's local truncation error demonstrate an achieved order of accuracy between 1.82 and 1.88. Convergence results for the multigrid scheme are presented for both subsonic and transonic test cases and demonstrate W-cycle multigrid convergence rates between 0.84 and 0.94. Preliminary parallel scalability tests on both simple wing and complex complete aircraft geometries shows a computational speedup of 52 on 64 processors using the run-time mesh partitioner.

Aftosmis, M. J.↗
NASA NTRS2005

Application of Parallel Adjoint-Based Error Estimation and Anisotropic Grid Adaptation for Three-Dimensional Aerospace Configurations

This paper demonstrates the extension of error estimation and adaptation methods to parallel computations enabling larger, more realistic aerospace applications and the quantification of discretization errors for complex 3-D solutions. Results were shown for an inviscid sonic-boom prediction about a double-cone configuration and a wing/body segmented leading edge (SLE) configuration where the output function of the adjoint was pressure integrated over a part of the cylinder in the near field. After multiple cycles of error estimation and surface/field adaptation, a significant improvement in the inviscid solution for the sonic boom signature of the double cone was observed. Although the double-cone adaptation was initiated from a very coarse mesh, the near-field pressure signature from the final adapted mesh compared very well with the wind-tunnel data which illustrates that the adjoint-based error estimation and adaptation process requires no a priori refinement of the mesh. Similarly, the near-field pressure signature for the SLE wing/body sonic boom configuration showed a significant improvement from the initial coarse mesh to the final adapted mesh in comparison with the wind tunnel results. Error estimation and field adaptation results were also presented for the viscous transonic drag prediction of the DLR-F6 wing/body configuration, and results were compared to a series of globally refined meshes. Two of these globally refined meshes were used as a starting point for the error estimation and field-adaptation process where the output function for the adjoint was the total drag. The field-adapted results showed an improvement in the prediction of the drag in comparison with the finest globally refined mesh and a reduction in the estimate of the remaining drag error. The adjoint-based adaptation parameter showed a need for increased resolution in the surface of the wing/body as well as a need for wake resolution downstream of the fuselage and wing trailing edge in order to achieve the requested drag tolerance. Although further adaptation was required to meet the requested tolerance, no further cycles were computed in order to avoid large discrepancies between the surface mesh spacing and the refined field spacing.

Lee-Rausch, E. M.↗
NASA NTRS1992

Mesh generation/refinement using fractal concepts and iterated function systems

A novel method of mesh generation is proposed which is based on the use of fractal concepts to derive contractive, affine transformations. The transformations are constructed in such a manner that the attractors of the resulting maps are a union of the points, lines and surfaces in the domain. In particular, the mesh nodes may be generated recursively as a sequence of points which are obtained by applying the transformations to a coarse background mesh constructed from the given boundary data. A Delaunay triangulation or similar edge connection approach can then be performed on the resulting set of nodes in order to generate the mesh. Local refinement of an existing mesh can also be performed using the procedure. The method is easily extended to three dimensions, in which case the Delaunay triangulation is replaced by an analogous 3D tesselation.

Bova, S. W.↗
NASA NTRS1998

3D Navier-Stokes Time Accurate Solutions Using Multipartitioning Parallel Computation Methodology

A parallel CFD code solving 3D time accurate Navier-Stokes equations with multipartitioning parallel Methodology is being developed in collaboration with Ohio State University within the Air Vehicle Directorate, at Wright Patterson Air Force Base. The advantage of the multipartitioning parallel method is that the domain decomposition will not introduce domain boundaries for the implicit operators. A ring structure data communication is employed so that the implicit time accurate method can be implemented for multi-processors with the same accuracy as for the single processor. No sub-iteration is needed at the domain boundaries. The code has been validated for some typical unsteady flows, which include Coutte Flow, flow passing a cylinder. The code now is being employed for a large scale time accurate wall jet transient flow computation. 'ne preliminary results are promising. The mesh has been refined to capture more details of the flow field. The mesh refinement computation is in progress and would be difficult to successfully implement without the parallel computation techniques used. A modified version of the code with more efficient inversion of the diagonalized block matrix is currently being tested.

Zha, Ge-Cheng↗
NASA NTRS1999

Parallel Tetrahedral Mesh Adaptation with Dynamic Load Balancing

The ability to dynamically adapt an unstructured grid is a powerful tool for efficiently solving computational problems with evolving physical features. In this paper, we report on our experience parallelizing an edge-based adaptation scheme, called 3D_TAG. using message passing. Results show excellent speedup when a realistic helicopter rotor mesh is randomly refined. However. performance deteriorates when the mesh is refined using a solution-based error indicator since mesh adaptation for practical problems occurs in a localized region., creating a severe load imbalance. To address this problem, we have developed PLUM, a global dynamic load balancing framework for adaptive numerical computations. Even though PLUM primarily balances processor workloads for the solution phase, it reduces the load imbalance problem within mesh adaptation by repartitioning the mesh after targeting edges for refinement but before the actual subdivision. This dramatically improves the performance of parallel 3D_TAG since refinement occurs in a more load balanced fashion. We also present optimal and heuristic algorithms that, when applied to the default mapping of a parallel repartitioner, significantly reduce the data redistribution overhead. Finally, portability is examined by comparing performance on three state-of-the-art parallel machines.

Oliker, Leonid↗
NASA NTRS1994

Laminar and turbulent flow computations of Type 4 shock-shock interference aerothermal loads using unstructured grids

This report presents computations for the Type 4 shock-shock interference flow under laminar and turbulent conditions using unstructured grids. Mesh adaptation was accomplished by remeshing, refinement, and mesh movement. Two two-equation turbulence models were used to analyze turbulent flows. The mean flow governing equations and the turbulence governing equations are solved in a coupled manner. The solution algorithm and the details pertaining to its implementation on unstructured grids are described. Computations were performed at two different freestream Reynolds numbers at a freestream Mach number of 11. Effects of the variation in the impinging shock location are studied. The comparison of the results in terms of wall heat flux and wall pressure distributions is presented.

Vemaganti, Gururaja R.↗
NASA NTRS1991

A finite dynamic element for laminated composite plates and shells

Development of finite dynamic elements can result in a significant reduction of computing time and cost for calculation of natural frequencies and mode shapes, which is an essential part of flutter prediction. Analysis with and without the dynamic terms is an alternative to constructing a new finite element mesh, to determine whether the mesh is sufficiently refined. Finite dynamic elements show spectacular improvement in convergence of higher modes with mesh refinement, but the improvement for lower modes is not so great. Cost reduction ratios greater than 20 have been observed for some modes. An average cost reduction ratio of 12 was achieved for the first six modes of a swept, tapered sandwich composite plate, at the 3 percent error level. Another set of calculations was made to determine the mesh density and cost parameters for which none of the first 12 frequencies was in error by more than 3 percent. It was found that the computing cost parameter for the dynamic element was about three times lower than the basic triangular element and 5.9 times lower than an eight-node isoparametric element.

Martin, C. W.↗
NASA NTRS1991

A solution-adaptive mesh algorithm for dynamic/static refinement of two and three dimensional grids

An adaptive grid algorithm has been developed in two and three dimensions that can be used dynamically with a solver or as part of a grid refinement process. The algorithm employs a transformation from the Cartesian coordinate system to a general coordinate space, which is defined as a parallelepiped in three dimensions. A weighting function, independent for each coordinate direction, is developed that will provide the desired refinement criteria in regions of high solution gradient. The adaptation is performed in the general coordinate space and the new grid locations are returned to the Cartesian space via a simple, one-step inverse mapping. The algorithm for relocation of the mesh points in the parametric space is based on the center of mass for distributed weights. Dynamic solution-adaptive results are presented for laminar flows in two and three dimensions.

Benson, Rusty A.↗
NASA NTRS1997

Adaptive Meshing Techniques for Viscous Flow Calculations on Mixed Element Unstructured Meshes

An adaptive refinement strategy based on hierarchical element subdivision is formulated and implemented for meshes containing arbitrary mixtures of tetrahendra, hexahendra, prisms and pyramids. Special attention is given to keeping memory overheads as low as possible. This procedure is coupled with an algebraic multigrid flow solver which operates on mixed-element meshes. Inviscid flows as well as viscous flows are computed an adaptively refined tetrahedral, hexahedral, and hybrid meshes. The efficiency of the method is demonstrated by generating an adapted hexahedral mesh containing 3 million vertices on a relatively inexpensive workstation.

Mavriplis, D. J.↗
NASA NTRS1986

Unsteady separated boundary layer in a transonic diffuser flow with self-excited oscillations

A numerical investigation of two-dimensional unsteady boundary layer in a transonic diffuser flow with self-excited oscillations and strong flow separation by solving the compressible, Reynolds-averaged, thin-layer Navier-Stokes equations with two-equations turbulence model is described. Three different meshes with constant streamwise mesh distribution and varying vertical mesh distribution were used. Results obtained indicate that a refinement of mesh studied here has minimal effect on the mean boundary layer flow but significantly increases the amplitude of oscillation of all flow variables. Comparisons of unsteady wall pressure, velocity profile, terminal shock, and separation pocket among computations and with experiment are presented.

Hsieh, T.↗
NASA NTRSDate not supplied

LAVA Voronoi Mesher for Wall-Modeled Large-Eddy Simulations

The unstructured Voronoi mesher currently being developed within the Launch, Ascent, and Vehicle Aerodynamics (LAVA) software framework at NASA Ames Research Center is described in detail. The discussions include, but are not limited to, the strategies used in the seeding and smoothing phases to ensure a high-quality mesh for Wall-Modeled Large-Eddy Simulations (WMLES), the methods behind the cell clipping algorithm responsible for conforming the mesh to a complex geometry, and the approach to create a global mesh from the distinct Voronoi cells. Applications and benefits of the Voronoi meshing approach are also presented. The automated meshing paradigm introduced was able to significantly reduce the time necessary to create a high-quality mesh around a complex geometry when compared against the current LAVA curvilinear overset meshing standard. For example, the task of generating a single mesh around the high-lift common research model requires the full dedication of a mesh generation expert for a period between one and two months. A family of meshes with different refinement levels up to six hundred million cells can be generated by a single engineer in a day or two. This technology has the potential for decreasing the turnaround time for conducting WMLES around complex geometries, as well as facilitating comprehensive mesh refinement studies.

Victor C B Sousa↗
NASA NTRS2007

Simulating Space Capsule Water Landing with Explicit Finite Element Method

A study of using an explicit nonlinear dynamic finite element code for simulating the water landing of a space capsule was performed. The finite element model contains Lagrangian shell elements for the space capsule and Eulerian solid elements for the water and air. An Arbitrary Lagrangian Eulerian (ALE) solver and a penalty coupling method were used for predicting the fluid and structure interaction forces. The space capsule was first assumed to be rigid, so the numerical results could be correlated with closed form solutions. The water and air meshes were continuously refined until the solution was converged. The converged maximum deceleration predicted is bounded by the classical von Karman and Wagner solutions and is considered to be an adequate solution. The refined water and air meshes were then used in the models for simulating the water landing of a capsule model that has a flexible bottom. For small pitch angle cases, the maximum deceleration from the flexible capsule model was found to be significantly greater than the maximum deceleration obtained from the corresponding rigid model. For large pitch angle cases, the difference between the maximum deceleration of the flexible model and that of its corresponding rigid model is smaller. Test data of Apollo space capsules with a flexible heat shield qualitatively support the findings presented in this paper.

Wang, John T.↗
NASA NTRS2006

Parallel, Gradient-Based Anisotropic Mesh Adaptation for Re-entry Vehicle Configurations

Two gradient-based adaptation methodologies have been implemented into the Fun3d refine GridEx infrastructure. A spring-analogy adaptation which provides for nodal movement to cluster mesh nodes in the vicinity of strong shocks has been extended for general use within Fun3d, and is demonstrated for a 70 sphere cone at Mach 2. A more general feature-based adaptation metric has been developed for use with the adaptation mechanics available in Fun3d, and is applicable to any unstructured, tetrahedral, flow solver. The basic functionality of general adaptation is explored through a case of flow over the forebody of a 70 sphere cone at Mach 6. A practical application of Mach 10 flow over an Apollo capsule, computed with the Felisa flow solver, is given to compare the adaptive mesh refinement with uniform mesh refinement. The examples of the paper demonstrate that the gradient-based adaptation capability as implemented can give an improvement in solution quality.

Bibb, Karen L.↗
NASA NTRS1991

Unstructured and adaptive mesh generation for high Reynolds number viscous flows

A method for generating and adaptively refining a highly stretched unstructured mesh suitable for the computation of high-Reynolds-number viscous flows about arbitrary two-dimensional geometries was developed. The method is based on the Delaunay triangulation of a predetermined set of points and employs a local mapping in order to achieve the high stretching rates required in the boundary-layer and wake regions. The initial mesh-point distribution is determined in a geometry-adaptive manner which clusters points in regions of high curvature and sharp corners. Adaptive mesh refinement is achieved by adding new points in regions of large flow gradients, and locally retriangulating; thus, obviating the need for global mesh regeneration. Initial and adapted meshes about complex multi-element airfoil geometries are shown and compressible flow solutions are computed on these meshes.

Mavriplis, Dimitri J.↗
NASA NTRS1991

Unstructured and adaptive mesh generation for high Reynolds number viscous flows

A method for generating and adaptively refining a highly stretched unstructured mesh suitable for the computation of high-Reynolds-number viscous flows about arbitrary two-dimensional geometries was developed. The method is based on the Delaunay triangulation of a predetermined set of points and employs a local mapping in order to achieve the high stretching rates required in the boundary-layer and wake regions. The initial mesh-point distribution is determined in a geometry-adaptive manner which clusters points in regions of high curvature and sharp corners. Adaptive mesh refinement is achieved by adding new points in regions of large flow gradients, and locally retriangulating; thus, obviating the need for global mesh regeneration. Initial and adapted meshes about complex multi-element airfoil geometries are shown and compressible flow solutions are computed on these meshes.

Mavriplis, D. J.↗
NASA NTRS1998

Dynamic Load Balancing for Adaptive Unstructured Grids

Dynamic mesh adaptation on unstructured grids is a powerful tool for computing unsteady three-dimensional problems that require grid modifications to efficiently resolve solution features. By locally refining and coarsening the mesh to capture phenomena of interest, such procedures make standard computational methods more cost effective. Highly refined meshes are required to accurately capture shock waves, contact discontinuities, vortices, and shear layers in fluid flow problems. Adaptive meshes have also proved to be useful in several other areas of computational science and engineering like computer vision and graphics, semiconductor device modeling, and structural mechanics. Local mesh adaptation provides the opportunity to obtain solutions that are comparable to those obtained on globally-refined grids but at a much lower cost. Additional information is contained in the original extended abstract.

Biswas, Rupak↗