Search NASA⌕ Search

SEARCH · Search NASA

Results for “Metal coordination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Metal-Dependent Photodissociation of Hydrazone Photoswitches from Rare-Earth Complexes

Rare-earth element separation processes often rely on a small decrease in ionic radii along the series of elements. Separation processes based on the distinct optical properties of REs remain less explored, although photochemical methods may offer a viable alternative. Accurate selection of the synthetic precursors of a photoswitchable acylhydrazonic ligand led to a system that could quantitatively isomerize (E−to−Z) upon irradiation with commercial LED lights. Coordination of the photoswitch with RE III nitrates (RE = La−Lu except Pm and Y) resulted in the retention of the photoswitching properties observed in solution. The lower binding affinity of the generated Z−isomer with RE III ions yielded the dissociation of the complexes upon irradiation (photodissociation) with the release of RE−nitrates in solution. The rate of the reaction was found to be dependent on the optical properties of the RE III ions, with nonemissive complexes (no 4f excited states) dissociating faster than emissive ones (having accessible 4f excited states). A thorough solid-state characterization of the complexes was performed by using crystallographic and photochemical methods. Ultimately, the accessibility of the 4f excited states of the metals following light irradiation and excitation of the ligand led to a decrease in the rate of the reaction due to quenching of the ligand excited state. These results demonstrate that the direct modulation of the metal coordination environment, combined with the metal-dependent reaction rate, could provide a strategy for the development of RE−separation processes based on differences in their optical properties.

Ions↗
DOE OSTI2024

Irreversible Trace Metal Binding to Goethite Controlled by the Ion Size

The dynamics of trace metals at mineral surfaces influence their fate and bioaccessibility in the environment. Trace metals on iron (oxyhydr)oxide surfaces display adsorption–desorption hysteresis, suggesting entrapment after aging. However, desorption experiments may perturb the coordination environment of adsorbed metals, the distribution of labile Fe(III), and mineral aggregation properties, influencing the interpretation of labile metal fractions. Here, in this study, we investigated irreversible binding of nickel, zinc, and cadmium to goethite after aging times of 2–120 days using isotope exchange. Dissolved and adsorbed metal pools exchange rapidly, with half times <90 min, but all metals display a solid-associated fraction inaccessible to isotope exchange. The size of this nonlabile pool is the largest for nickel, with the smallest ionic radius, and the smallest for cadmium, with the largest ionic radius. Spectroscopy and extractions suggest that the irreversibly bound metals are incorporated in the goethite structure. Rapid exchange of labile solid-associated metals with solution demonstrates that adsorbed metals can sustain the dissolved pool in response to biological uptake or fluid flow. Trace metal fractions that irreversibly bind following adsorption provide a contaminant sequestration pathway, limit the availability of micronutrients, and record metal isotope signatures of environmental processes.

58 GEOSCIENCES↗
DOE OSTI2021

Conflicting Roles of Coordination Number on Catalytic Performance of Single-Atom Pt Catalysts

Tailoring the coordination number (CN) of metal atoms has been increasingly recognized as one of the strategies to enhance the catalytic performance of single-atom catalysts (SACs). We here present the single-atom Pt loaded onto a semiconductor SiC substrate (Pt 1 /SiC) with a high loading of up to 9.6 wt % and a precise control of its CN from 3 to 5. The CN tuning was enabled by binding organic linkers on the substrate surface and retaining the metal-linker bonds after photoreduction and mild thermal treatment from 80 to 160 °C. At a higher temperature, Pt became coordinated with additional oxygen atoms from the surface Si–OH groups and organic linkers. This resulted in the increase of the CN from 3 for Pt 1 treated at 80 °C to 5 at 160 °C. The Pt 1 /SiCs with varying CNs effectively broke C–Br bonds in the model brominated compounds through both thermocatalysis using H 2 and photocatalysis using H + as the source for strongly reducing atomic hydrogen (H atom ). The thermocatalytic debromination kinetics increased with the decreasing CN. However, photocatalytic debromination kinetics were independent of the CN, contradictory to the prevalent understanding in literature. Furthermore, we attribute the differential CN effects on these two catalytic schemes to the differences in the pathways for the formation of H atom as well as the rate-limiting step of the overall reaction pathways. Our study presents a unique and important example as to how the performance of SACs and the role of CN can significantly vary depending on the catalytic schemes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Irreversible Trace Metal Binding to Goethite Controlled by the Ion Size

The dynamics of trace metals at mineral surfaces influence their fate and bioaccessibility in the environment. Trace metals on iron (oxyhydr)oxide surfaces display adsorption–desorption hysteresis, suggesting entrapment after aging. However, desorption experiments may perturb the coordination environment of adsorbed metals, the distribution of labile Fe(III), and mineral aggregation properties, influencing the interpretation of labile metal fractions. In this study, we investigated irreversible binding of nickel, zinc, and cadmium to goethite after aging times of 2–120 days using isotope exchange. Dissolved and adsorbed metal pools exchange rapidly, with half times <90 min, but all metals display a solid-associated fraction inaccessible to isotope exchange. The size of this nonlabile pool is the largest for nickel, with the smallest ionic radius, and the smallest for cadmium, with the largest ionic radius. Spectroscopy and extractions suggest that the irreversibly bound metals are incorporated in the goethite structure. Rapid exchange of labile solid-associated metals with solution demonstrates that adsorbed metals can sustain the dissolved pool in response to biological uptake or fluid flow. Trace metal fractions that irreversibly bind following adsorption provide a contaminant sequestration pathway, limit the availability of micronutrients, and record metal isotope signatures of environmental processes.

58 GEOSCIENCES↗
DOE OSTI2025

Cross-aldol condensation on missing linker sites of metal–organic framework UiO-66

Missing linkers induce coordinatively unsaturated Lewis acid-base pair sites in metal–organic frameworks such as UiO-66 (Zr). The Lewis acid-base pair is induced by replacing the benzene dicarboxylic acid linker with formic acid, which subsequently is thermally decomposed. The concentration of coordinatively unsaturated Zr 4+ cations was titrated with acetone. In parallel to their concentration, the catalytic activity increased while the selectivity for aldol condensation between furfural and acetone remained constant. The missing linkers generate a complex ensemble consisting of an (at least partly) accessible Zr 4+ cation surrounded by oxygen, catalyzing the cross-aldol condensation. As a result, density functional theory calculations, matching the experimental findings provide a more detailed understanding of the elementary steps during the condensation reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Synthesis and catalytic performance of polydopamine supported metal nanoparticles

Polydopamine (PDA) is an emerging nature-inspired biopolymer material that possesses many interesting properties including self-assembly and universal adhesion. PDA is also able to form coordination bonds with various metal ions, which can be reduced to metal nanoparticles (NPs) as a result of thermal annealing under protective environment. In this study, PDA has been utilized as a support material to synthesize Pt NPs in an aqueous solution at room temperature. The catalytic performance of the resulting PDA-Pt nanocomposite was evaluated using an electrochemical workstation which showed comparable activity to Pt/C material for hydrogen evolution reaction (HER). Furthermore, Cu, Ni, and Cu–Ni NPs supported on PDA were also obtained using this strategy with assistance of subsequent thermal annealing. The phase evolution of the NPs was studied by in-situ X-ray diffraction while the morphology of the nanoparticles was investigated using electron microscopic techniques. Preliminary results showed the NPs supported on PDA also possessed HER activity. This work demonstrates that PDA can be utilized as a potential support for synthesis of metal NPs that can be exploited in engineering applications such as catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Atomically Dispersed CuN x Sites from Thermal Activation of Boron Imidazolate Cages for Electrocatalytic Methane Generation

Atomically dispersed metal sites (ADMSs) have been recognized as promising candidates for electrochemical conversion. Among a diverse range of molecular precursors for ADMS synthesis, framework materials are particularly interesting due to their high degree of tunability and control over the primary coordination sphere of the metal ions. In this work, we demonstrate that a copper boron imidazolate cage, BIF-29(Cu), is a convenient precursor for a competent catalyst with isolated Cu sites coordinated by N donors for carbon dioxide electroreduction (CO 2 RR). Although BIF-29(Cu) exhibited moderate methane selectivity over hydrogen evolution reaction (HER), the methane selectivity is significantly enhanced by 2 times (55% CH 4 at –1.25 V vs RHE) after mild thermal activation. Extensive characterization methods indicate the transformation of crystalline BIF-29(Cu) into an amorphous carbonaceous material comprising isolated CuN x sites. Moreover, in situ X-ray absorbance spectroscopy indicates stable CuN x sites that are reduced during CO 2 RR. This work encourages the discovery of single-site electrocatalytic systems through a rational selection of molecular precursor and calcination parameters for promoting product selectivity.

10 SYNTHETIC FUELS↗
DOE OSTI2022

On the use of vibronic coherence to identify reaction coordinates for ultrafast excited-state dynamics of transition metal-based chromophores

In this study, the question of whether one can use information from quantum coherence as a means of identifying vibrational degrees of freedom that are active along an excited-state reaction coordinate is discussed. Specifically, we are exploring the notion of whether quantum oscillations observed in single-wavelength kinetics data exhibiting coherence dephasing times that are intermediate between that expected for either pure electronic or pure vibrational dephasing are vibronic in nature and therefore may be coupled to electronic state-to-state evolution. In the case of a previously published Fe(ιι) polypyridyl complex, coherences observed subsequent to 1 A 1 → 1 MLCT excitation were linked to large-amplitude motion of a portion of the ligand framework; dephasing times on the order of 200–300 fs suggested that these degrees of freedom could be associated with ultrafast (~100 fs) conversion from the initially formed MLCT excited state to lower-energy, metal-centered ligand-field excited state(s) of the compound. Incorporation of an electronically benign but sterically restrictive Cu(ι) ion into the superstructure designed to interfere with this motion yielded a compound exhibiting a ~25-fold increase in the compound’s MLCT lifetime, a result that was interpreted as confirmation of the initial hypothesis. However, new data acquired on a different chemical system – Cr(acac') 3 (where acac' represents various derivatives of acetylacetonate) – yielded results that call into question this same hypothesis. Coherences observed subsequent to 4 A 2 → 4 T 2 ligand-field excitation on a series of molecules implicated similar vibrational degrees of freedom across the series, but exhibited dephasing times ranging from 340 fs to 2.5 ps without any clear correlation to the dynamics of excited-state evolution in the system. Taken together, the results obtained on both of these chemical platforms suggest that while identification of coherences can indeed point to degrees of freedom that should be considered as candidate modes for defining reaction trajectories, our understanding of the factors that determine the interplay across coherences, dephasing times, and electronic and geometric structure is insufficient at the present time to view this parameter as a robust metric for differentiating active versus spectator modes for ultrafast dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Predicting metal–metal interactions. II. Accelerating generalized schemes through physical insights

Operando-computational frameworks that integrate descriptors for catalyst stability within catalyst screening paradigms enable predictions of rates and selectivity on chemically faithful representations of nanoparticles under reaction conditions. These catalyst stability descriptors can be efficiently predicted by density functional theory (DFT)-based models. The alloy stability model, for example, predicts the stability of metal atoms in nanoparticles with site-by-site resolution. In this work, we use physical insights to present accelerated approaches of parameterizing this recently introduced alloy-stability model. These accelerated approaches meld quadratic functions for the energy of metal atoms in terms of the coordination number with linear correlations between model parameters and the cohesive energies of bulk metals. By interpolating across both the coordination number and chemical space, these accelerated approaches shrink the training set size for 12 fcc p- and d-block metals from 204 to as few as 24 DFT calculated total energies without sacrificing the accuracy of our model. We validate the accelerated approaches by predicting adsorption energies of metal atoms on extended surfaces and 147 atom cuboctahedral nanoparticles with mean absolute errors of 0.10 eV and 0.24 eV, respectively. This efficiency boost will enable a rapid and exhaustive exploration of the vast material space of transition metal alloys for catalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Paramagnetic Molecular Semiconductors Combining Anisotropic Magnetic Ions with TCNQ Radical Anions

We report the synthesis, magnetic properties, and transport properties of paramagnetic metal complexes, [Co(DMF) 4 (TCNQ) 2 ](TCNQ) 2 (1), [La(DMF) 8 (TCNQ)](TCNQ) 5 (2), and [Nd(DMF) 7 (TCNQ)](TCNQ) 5 (3) (DMF = N,N-dimethylformamide, TCNQ = 7,7,8,8-tetracyanoquinodimethane). All three compounds contain fractionally charged TCNQ δ– anions (0 < δ < 1) and mononuclear complex cations in which the coordination environment of a metal center includes several DMF molecules and one or two terminally coordinated TCNQ δ– anions. The coordinated TCNQ δ– anions participate in π–π stacking interactions with noncoordinated TCNQ δ– anions, forming columnar substructures that provide efficient charge-transporting pathways. Furthermore, temperature-dependent conductivity measurements demonstrate that all three compounds exhibit semiconducting behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Stable Metal–Organic Electrocatalysts for Anion-Exchange Membrane Water Electrolyzers by Defect Engineering

Developing efficient and durable catalysts for the alkaline oxygen evolution reaction (OER) is vital to achieving practical anion-exchange membrane water electrolyzers (AEMWE) for green hydrogen production. In this work, we break the activity-stability trade-off of electrocatalysis by defect engineering of Ni-based metal-organic electrocatalysts (Ni-benzene dicarboxylate; Ni-BDC) through coordinating ferrocenecarboxylates (Fc) to the metal sites. Experimental results collectively reveal that the defect MOF (Ni-BDC:Fc_5:1) exhibits a high OER turnover frequency of 0.75 O 2 s -1 at 300 mV overpotential. Operando Raman spectroscopy and isotope-labelling electrochemical mass spectrometry measurements indicate the structure of Ni-BDC:Fc_5:1 is also more stable in service than that of pure Ni-BDC. The high activity and stability could be attributed to the moderate defects (i.e., unsaturated Ni sites) in the structure that not only increase the intrinsic activity and stability of the local active environment by inhibiting lattice oxygen exchange, but also electrochemically activates the bulk of the catalysts by creating a porous network that facilitates internal H 2 O/OH - conduction with enhanced electronic conduction. Accordingly, an AEMWE employing Ni-BDC:Fc_5:1 as the OER catalyst delivers an industrial-level current density of 1 A cm -2 at 1.73 V cell and can be steadily operated for more than 120 hours.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Direct Characterization of Atomically Dispersed Catalysts: Nitrogen-Coordinated Ni Sites in Carbon-Based Materials for CO 2 Electroreduction

Metal, nitrogen-doped carbon materials have attracted interest as heterogenous catalysts that contain MN x active sites that are analogous to molecular catalysts. Of particular interest is Ni,N-doped carbon, a catalyst that is active for the electrochemical reduction of CO 2 to CO. Critical to the understanding of these materials is proof of single atomic sites and characterization of the environment surrounding the metal atom; however, directly probing this coordination remains challenging. This challenge is addressed in this study by combining scanning transmission electron microscopy (STEM), single atom electron energy loss spectroscopy (EELS), and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Through STEM imaging, atomic dispersion of Ni in the carbon framework is confirmed and image analyses are utilized to give semiquantitative estimates of neighbor distance distributions and site densities of Ni atoms. Atomic resolution EELS demonstrates that N and Ni are colocated at the single Ni atom sites suggesting Ni–N coordination. ToF-SIMS reveals a distribution of NiN x C y - fragments that reflect the Ni–N bonding environments within Ni,N-doped carbon. The fragmentation from Ni,N-doped carbon is similar to Ni phthalocyanine, suggesting the existence of heterogenized, molecular-like NiN 4 active sites which motivates future studies that leverage insight from molecular catalysis design to develop next-generation heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Facile and Scalable Synthesis of Metal- and Nitrogen-Doped Carbon Nanotubes for Efficient Electrochemical CO 2 Reduction

Metal- and nitrogen-doped carbon (M–N–C) is a promising material to catalyze electrochemical CO 2 reduction reaction (CO 2 RR). However, most M–N–C catalysts in the literature require complicated synthesis procedures and produce small quantities per batch, limiting the commercialization potential. In this work, we developed a simple and scalable synthesis method to convert metal-impurity-containing commercial carbon nanotubes (CNTs) and nitrogen-containing organic precursors into M–N–C via one-step moderate-temperature (650 °C) pyrolysis without any other treatment nor the need to add metal precursors. Batches of catalysts in varied mass up to 10 g (150 mL in volume) per batch were synthesized, and repeatable catalytic performances were demonstrated. To the best of our knowledge, the 10 g batch is one of the largest batches of CO2RR catalysts synthesized in the literature while requiring minimal synthesis steps. The catalyst possessed single-atomic iron–nitrogen (Fe–N) sites, enabling a high performance of >95% CO product selectivity at a high current density of 400 mA/cm 2 and high stability for 45 h at 100 mA/cm 2 in a flow cell testing. The catalyst outperformed a benchmark noble-metal nanoparticle catalyst and achieved longer stability than many other reported M–N–C catalysts in the literature. The scalable and cost-effective synthesis developed in this work paves a pathway toward practical CO 2 RR applications. The direct utilization of metal impurities from raw CNTs for efficient catalyst synthesis with minimal treatment is a green and sustainable engineering approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Toward Improved Charge Separation through Conformational Control in Copper Coordination Complexes

The continued development of solar energy as a renewable resource necessitates the design and study of new approaches to sustaining photodriven charge separation (CS). To this end, we present a bioinspired approach in which triggered conformational changes are used to control electron transfer (ET) events. We report, photo-induced conformational rearrangements of a ligand are translated into changes in the coordination geometry and environment about a bound metal ion. Taking advantage of the differential coordination properties of Cu I and Cu II , these dynamics facilitate intramolecular ET from Cu I to the ligand to create a CS state. The synthesis and photophysical characterization of CuCl(dpaa R ) (dpaa = dipicolylaminoacetophenone, with R = H and OMe) is presented. These ligands incorporate a fluorophore into their framework that gives rise to a twisted intramolecular charge transfer (TICT) excited state. Excited state ligand twisting provides a tetragonal coordination geometry capable of capturing Cu II in the CS state when an internal ortho-OMe binding site is present (as in dpaaOMe). We employ NMR, IR, EPR, and optical spectroscopies, X-ray diffraction, and electrochemical methods to establish the ground state properties of the Cu I and Cu II complexes. We then investigate the photophysical dynamics of these Cu I complexes via time-resolved photoluminescence (TR-PL), and optical transient absorption (OTA) spectroscopies. We show that relative to controls lacking a TICT-active ligand, the lifetime of the CS state is enhanced ~1000-fold. Further, the presence of the ortho-OMe substituent greatly enhances the lifetime of the TICT* state and biases the coordination environment toward Cu II . The presence of Cu I decreases photoinduced degradation from 14 to <2% but does not result in significant quenching via ET. Factors affecting CS in these systems are discussed, laying the groundwork for our strategy toward solar energy conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗