Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microscopy Module”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Nucleotide- and metalloid-driven conformational changes in the arsenite efflux ATPase ArsA

Arsenite (As III ) is toxic to all organisms due to its ability to tightly bind exposed thiols within cells. An important As III resistance mechanism in prokaryotes involves proteins encoded by thearsoperon. A central component of thearsoperon in many bacteria is the cytoplasmic ATPase, ArsA, which orchestrates a series of nucleotide-dependent handoffs, starting with the capture of As III by the ArsD metallochaperone and culminating in its removal from the cell by the ArsB efflux pump. Although the mechanism of ArsA has been widely studied, the molecular details of how nucleotide hydrolysis modulates these events remain unclear. ArsA is an archetypal member of the intradimeric Walker A (IWA) family of ATPases, implicated in a diversity of complex biological functions. Conformational changes typical of IWA ATPases have been postulated to drive these molecular events but have not been demonstrated. We report cryogenic electron microscopy (cryo-EM) structures of ArsA in MgADP-bound and MgATP-boundopenstates, as well as a distinctclosedMgATP-bound state liganded to As III . X-ray absorption spectroscopy (XAS) confirmed three-coordinate binding of As III to the conserved cysteines at the metalloid-binding site of the closed state. Coupled with biochemical characterization, our cryo-EM structures reveal key conformational changes in the ArsA catalytic cycle consistent with other IWA ATPases and provide the structural basis for allosteric activation of nucleotide hydrolysis by As III . This work establishes how the nucleotide state of ArsA transiently creates a high-affinity binding site that can sequester metalloid within the cell, followed by a nucleotide-driven handoff to ArsB for efflux.

Science & Technology - Other Topics↗
DOE OSTI2021

PERFORMANCE CHARACTERIZATION OF THE DIRECT CONTACT MEMBRANE DISTILLATION MODULE OPERATED WITH HIGHLY CONCENTRATED SOLUTION

The experimental study was conducted to characterize the performance of the flat sheet Direct Contact Membrane Distillation. The length degradation was studied in a short and long module with and without spacers. The experimental study is validated using the predicted flux for a wide range of operating conditions using deionized water. Three different membranes are used in the parametric study for feed Reynolds number varied between 500 and 2000, and inlet feed temperature varied between 45°C and 80°C. PTFE membrane was shown to be more effective than the PVDF due to its higher permeability coefficient and higher hydrophobicity. Fouling study was conducted on the selected PTFE membrane with various feed Reynolds numbers between 500 and 2000 and feed inlet temperature between 50°C and 80°C. Membranes used in the fouling study were characterized using scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) for the morphology and chemical composition of the fouling layer. 36 hours of operation with 10 wt% NaCl (100,000 ppm) at feed inlet temperatures 80°C and 60°C and fixed Reynolds 2000 demonstrated a drop in flux by 31% and 27%, respectively. Low flow rate and high temperature are favorable conditions for fouling formation and reduced permeate flux for highly concentrated solutions. The spacers improved the flux by 30.8% and 27.6% at the operating Reynolds numbers 2000 the short and long channel modules. This study helps to design and optimize DCMD modules for industrial-size desalination and water treatment applications.

Kim, Deliya↗
DOE OSTI2021

Effects of varying gelatin coating concentrations on RANKL induced osteoclastogenesis

Here, we assessed the effects of varying concentrations of gelatin coating on Receptor Activator of Nuclear Factor κ-B Ligand (RANKL)-induced RAW264.7 murine macrophage differentiation into osteoclast (OC) via osteoclastogenesis. The microstructures of coating surfaces with different concentrations of gelatin were examined by scanning electron microscopy and atomic force microscopy. Increased gelatin coating concentrations led to decreased gel rigidity but increased surface adhesion force attenuated OC differentiation and the decreased actin ring formation in RANKL-induced osteoclastogenesis. The decreased actin ring formation is associated with decreased lysosomal-associated membrane protein 1 (LAMP1) activity and bone resorption in the differentiated OCs with different gelatin coating concentrations as compared to the cells differentiated without gelatin coatings. In addition, increasing concentrations of gelatin coating attenuated the medium TGF-β1 protein levels and the expression levels of TGF-β and type-I (R1) and type-II (R2) TGF-β receptors in OCs, suggesting the gelatin-induced suppression of TGF-β signaling for the regulation of RNAKL-induced OC differentiation. Taken together, these findings showed that changes in gelatin coating concentrations, which were associated with altered gel thickness and substrate rigidity, might attenuate TGF-β signaling events to modulate OC differentiation and concomitant actin ring formation and bone matrix resorption in RANKL-induced osteoclastogenesis.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

The cryoelectron microscopy structure of the human CDK-activating kinase

The human CDK-activating kinase (CAK), a complex composed of cyclin-dependent kinase (CDK) 7, cyclin H, and MAT1, is a critical regulator of transcription initiation and the cell cycle. It acts by phosphorylating the C-terminal heptapeptide repeat domain of the RNA polymerase II (Pol II) subunit RPB1, which is an important regulatory event in transcription initiation by Pol II, and it phosphorylates the regulatory T-loop of CDKs that control cell cycle progression. Here, we have determined the three-dimensional (3D) structure of the catalytic module of human CAK, revealing the structural basis of its assembly and providing insight into CDK7 activation in this context. The unique third component of the complex, MAT1, substantially extends the interaction interface between CDK7 and cyclin H, explaining its role as a CAK assembly factor, and it forms interactions with the CDK7 T-loop, which may contribute to enhancing CAK activity. We have also determined the structure of the CAK in complex with the covalently bound inhibitor THZ1 in order to provide insight into the binding of inhibitors at the CDK7 active site and to aid in the rational design of therapeutic compounds.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

High Temperature, Isothermal Growth Promotes Close Packing and Thermal Stability in DNA-Engineered Colloidal Crystals

Here, we report a strategy to accelerate the synthesis and increase the crystallinity of colloidal crystals engineered with DNA. Specifically, by holding the DNA-modified Au particle building blocks above the T m of the individual nanoparticle building blocks, but slightly below the T m of the anticipated colloidal crystal during the assembly process, crystallinity is increased, and enthalpically-favored phases with high degrees of facet registration are observed. We studied the utility of this approach with systems for which the commonly adopted slow-cooling approach yielded primarily amorphous aggregates. In particular, we used it to synthesize high-volume fraction colloidal crystals from large (80 nm) anisotropic nanoparticles (cubes and rhombic dodecahedra) with short (<14 nm) DNA designed to restrict the degrees of freedom for the DNA bonds and maintain the anisotropy of the particle building block. Small-angle X-ray scattering and electron microscopy studies show that the crystalline phases synthesized via this method are more thermally stable than their corresponding aggregate phases, likely due to an increased number of DNA-DNA bonds between particles. Crystal size tunability (between 0.5 and 15 µm edge lengths) and epitaxial growth were demonstrated using this strategy by modulating the NaCl concentration in tandem with previously synthesized colloidal crystal nuclei. Taken together, this isothermal strategy provides a route to deliberately crystallize a wide variety of anisotropic colloidal materials and expands the phase space accessible to nanoparticles modified with DNA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Crystal structure of Mdm12 and combinatorial reconstitution of Mdm12/Mmm1 ERMES complexes for structural studies

Membrane contact sites between organelles serve as molecular hubs for the exchange of metabolites and signals. In yeast, the Endoplasmic Reticulum – Mitochondrion Encounter Structure (ERMES) tethers these two organelles likely to facilitate the non-vesicular exchange of essential phospholipids. Present in Fungi and Amoebas but not in Metazoans, ERMES is composed of five distinct subunits; among those, Mdm12, Mmm1 and Mdm34 each contain an SMP domain functioning as a lipid transfer module. We previously showed that the SMP domains of Mdm12 and Mmm1 form a hetero-tetramer. Here we describe our strategy to diversify the number of Mdm12/Mmm1 complexes suited for structural studies. We use sequence analysis of orthologues combined to protein engineering of disordered regions to guide the design of protein constructs and expand the repertoire of Mdm12/Mmm1 complexes more likely to crystallize. Using this combinatorial approach we report crystals of Mdm12/Mmm1 ERMES complexes currently diffracting to 4.5 Å resolution and a new structure of Mdm12 solved at 4.1 Å resolution. Our structure reveals a monomeric form of Mdm12 with a conformationally dynamic N-terminal β-strand; it differs from a previously reported homodimeric structure where the N-terminal β strands where swapped to promote dimerization. Based on our electron microscopy data, we propose a refined pseudo-atomic model of the Mdm12/Mmm1 complex that agrees with our crystallographic and small-angle X-ray scattering (SAXS) solution data. - Highlights: • We solved a 4.1 Å resolution crystal structure of Mdm12, the soluble subunit of ERMES. • The two Mdm12 apo monomers differ in the conformation of their N-terminal β-strands. • We reconstituted and crystallized two distinct Mdm12/Mmm1 complexes. • SAXS analysis of the complexes agrees with our previous electron microscopy data. • The structure suggests a head-to-tail association in the Mdm12/Mmm1 complex.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2017

Molecular basis of human CD22 function and therapeutic targeting

CD22 maintains a baseline level of B-cell inhibition to keep humoral immunity in check. As a B-cell-restricted antigen, CD22 is targeted in therapies against dysregulated B cells that cause autoimmune diseases and blood cancers. Here we report the crystal structure of human CD22 at 2.1 Å resolution, which reveals that specificity for α2-6 sialic acid ligands is dictated by a pre-formed β-hairpin as a unique mode of recognition across sialic acid-binding immunoglobulin-type lectins. The CD22 ectodomain adopts an extended conformation that facilitates concomitant CD22 nanocluster formation on B cells and binding to trans ligands to avert autoimmunity in mammals. We structurally delineate the CD22 site targeted by the therapeutic antibody epratuzumab at 3.1 Å resolution and determine a critical role for CD22 N-linked glycosylation in antibody engagement. Our studies provide molecular insights into mechanisms governing B-cell inhibition and valuable clues for the design of immune modulators in B-cell dysfunction.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Microwave-assisted synthesis of well-shaped UiO-66-NH2 with high CO2 adsorption capacity

Highlights: • Well-shaped UiO-66-NH{sub 2} was prepared through microwave heating in a short time. • Addition of HAc improves crystallinity and CO{sub 2} adsorption capacity of the UiO-66-NH{sub 2}. • UiO-66-NH{sub 2} prepared by microwave heating shows a higher CO{sub 2}/N{sub 2} adsorption selectivity. - Abstract: In a detailed study, the influence of microwave irradiation, synthesis time and temperature, addition of acetic acid (HAc) as a modulator on the morphology, crystallinity and stability of UiO-66-NH{sub 2} is investigated to develop a reliable and reproducible strategy for the preparation of well-shaped UiO-66-NH{sub 2}. The UiO-66-NH{sub 2} were characterized by powder X-ray diffraction (PXRD), field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), and gas adsorption. It is found that well-shaped UiO-66-NH{sub 2} with a high CO{sub 2} adsorption capacity can be synthesized in a short time by microwave heating. The UiO-66-NH{sub 2} crystals synthesized by microwave heating are of high quality and show a superior CO{sub 2} adsorption capacity (5.8 mmol/g at 273k and 1 bar) due to the strong interactions between the −NH{sub 2} group and CO{sub 2}. The CO{sub 2}/N{sub 2} selectivity of the obtained UiO-66-NH{sub 2} at 298 K and 1 bar is 66, which is much higher than that of the pristine UiO-66 of 17.8.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Probing Surface Plasmon Dynamics in Periodic Nanostructures through Ultrafast Electron Microscopy

Surface plasmon polaritons (SPPs) can be manipulated to localize and guide light in subwavelength distances, enabling them to find applications in a wide range of areas, from sensing to quantum computing. Among several methods of SPP excitation, periodic arrays of nano- and microstructures are of particular interest, as they enable engineering SPP properties through structural parameters. Here, in this study, using the photon-induced near-field electron microscopy (PINEM) technique, we investigated the mode formation, coupling, interference, and decay of SPPs in square and hexagonal arrays of circular nanoholes under both visible and near-infrared excitation. Polarization-resolved analysis revealed the key factors governing SPP localization and interference patterns, showing that the periodicity and symmetry of the array primarily determine the SPP interference patterns and their orientation, while pump polarization mainly modulates their intensity. Time-resolved PINEM measurements demonstrated the spatial dependence of the SPP temporal characteristics. In addition, cathodoluminescence (CL) spectroscopy was employed to examine the intrinsic plasmonic characteristics of the structure. Finite difference time domain (FDTD) simulations showed strong agreement with both PINEM and CL measurements on the spatial and spectral behavior of SPPs. Understanding the spatiotemporal dynamics of SPPs on nanostructures beyond the diffraction limit is crucial for optimizing plasmonic structures for advanced photonic and quantum technologies.

Plasmonics↗
DOE OSTI2021

Imaging two-dimensional generalized Wigner crystals

The Wigner crystal has fascinated condensed matter physicists for nearly 90 years. Signatures of two-dimensional (2D) Wigner crystals were first observed in 2D electron gases under high magnetic field, and recently reported in transition metal dichalcogenide moiré superlattices. Direct observation of the 2D Wigner crystal lattice in real space, however, has remained an outstanding challenge. Conventional scanning tunnelling microscopy (STM) has sufficient spatial resolution but induces perturbations that can potentially alter this fragile state. Here we demonstrate real-space imaging of 2D Wigner crystals in WSe 2 /WS 2 moiré heterostructures using a specially designed non-invasive STM spectroscopy technique. This employs a graphene sensing layer held close to the WSe 2 /WS 2 moiré superlattice. Local STM tunnel current into the graphene layer is modulated by the underlying Wigner crystal electron lattice in the WSe 2 /WS 2 heterostructure. Different Wigner crystal lattice configurations at fractional electron fillings of n = 1/3, 1/2 and 2/3, where n is the electron number per site, are directly visualized. The n = 1/3 and n = 2/3 Wigner crystals exhibit triangular and honeycomb lattices, respectively, to minimize nearest-neighbour occupations. The n = 1/2 state spontaneously breaks the original C3 symmetry and forms a stripe phase. Here our study lays a solid foundation for understanding Wigner crystal states in WSe 2 /WS 2 moiré heterostructures and provides an approach that is generally applicable for imaging novel correlated electron lattices in other systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Nature and evolution of incommensurate charge order in manganites visualized with cryogenic scanning transmission electron microscopy

Incommensurate charge order in hole-doped oxides is intertwined with exotic phenomena such as colossal magnetoresistance, high-temperature superconductivity, and electronic nematicity. Here, we map, at atomic resolution, the nature of incommensurate charge–lattice order in a manganite using scanning transmission electron microscopy at room temperature and cryogenic temperature (~93 K). In diffraction, the ordering wave vector changes upon cooling, a behavior typically associated with incommensurate order. However, using real space measurements, we discover that the ordered state forms lattice-locked regions over a few wavelengths interspersed with phase defects and changing periodicity. The cations undergo picometer-scale (~6 pm to 11 pm) transverse displacements, suggesting that charge–lattice coupling is strong. We further unearth phase inhomogeneity in the periodic lattice displacements at room temperature, and emergent phase coherence at 93 K. Such local phase variations govern the long-range correlations of the charge-ordered state and locally change the periodicity of the modulations, resulting in wave vector shifts in reciprocal space. These atomically resolved observations underscore the importance of lattice coupling and phase inhomogeneity, and provide a microscopic explanation for putative “incommensurate” order in hole-doped oxides.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Surfactants Used in Colloidal Synthesis Modulate Ni Nanoparticle Surface Evolution for Selective CO 2 Hydrogenation

Colloidal chemistry holds promise to prepare uniform and size-controllable pre-catalysts; however, it remains a challenge to unveil the atomic-level transition from pre-catalysts to active catalytic surfaces under the reaction conditions to enable the mechanistic design of catalysts. In this work, we report an ambient-pressure X-ray photoelectron spectroscopy study, coupled with in situ environmental transmission electron microscopy, infrared spectroscopy, and theoretical calculations, to elucidate the surface catalytic sites of colloidal Ni nanoparticles for CO 2 hydrogenation. We show that Ni nanoparticles with phosphine ligands exhibit a distinct surface evolution compared with amine-capped ones, owing to the diffusion of P under oxidative (air) or reductive (CO 2 + H 2 ) gaseous environments at elevated temperatures. The resulting NiP x surface leads to a substantially improved selectivity for CO production, in contrast to the metallic Ni, which favors CH 4 . The further elimination of surface metallic Ni sites by designing multi-step P incorporation achieves unit selectivity of CO in high-rate CO 2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Large-Area Material and Junction Damage in c–Si Solar Cells by Potential-Induced Degradation

This paper reports a new potential-induced degradation (PID) mechanism for crystalline silicon (c-Si), where Na diffuses everywhere and causes large-area material and junction degradation with point defects. Multiple characterization techniques are combined - Kelvin probe force microscopy, electron-beam induced current, dark lock-in thermography, transmission electron microscopy, time-of-flight secondary-ion mass spectrometry, and microwave photoconductance decay - as well as density functional theory (DFT) calculations. These characterization techniques and theoretical calculations are complementary in various aspects of a material's chemical, structural, electrical, and optoelectrical nature, as well as in atomic, nanometer, micrometer, millimeter, and cell and module scales. All results point consistently to a new discovery: substantial large-area deterioration of materials and junctions play a major role in c-Si PID (in addition to the previously reported local shunting defect caused by Na diffusion to planar defects). Furthermore, this new finding reveals a key PID component and leads to a new strategy for tailoring c-Si photovoltaics to ultimately resolve the PID issue.

14 SOLAR ENERGY↗
DOE OSTI2018

Kinetics of the Topochemical Transformation of (PbSe) m (TiSe 2 ) n (SnSe 2 ) m (TiSe 2 ) n to (Pb 0.5 Sn 0.5 Se) m (TiSe 2 ) n

Solid-state reaction kinetics on atomic length scales have not been heavily investigated due to the long times, high reaction temperatures, and small reaction volumes at interfaces in solid-state reactions. All of these conditions present significant analytical challenges in following reaction pathways. Herein we use in situ and ex situ X-ray diffraction, in situ X-ray reflectivity, high-angle annular dark field scanning transmission electron microscopy, and energy-dispersive X-ray spectroscopy to investigate the mechanistic pathways for the formation of a layered (Pb 0.5 Sn 0.5 Se) 1+δ (TiSe 2 ) m heterostructure, where m is the varying number of TiSe 2 layers in the repeating structure. Thin film precursors were vapor deposited as elemental-modulated layers into an artificial superlattice with Pb and Sn in independent layers, creating a repeating unit with twice the size of the final structure. At low temperatures, the precursor undergoes only a crystallization event to form an intermediate (SnSe 2 ) 1+γ (TiSe 2 ) m (PbSe) 1+δ (TiSe 2 ) m superstructure. At higher temperatures, this superstructure transforms into a (Pb 0.5 Sn 0.5 Se) 1+δ (TiSe 2 ) m alloyed structure. The rate of decay of superlattice reflections of the (SnSe 2 ) 1+γ (TiSe 2 ) m (PbSe) 1+δ (TiSe 2 ) m superstructure was used as the indicator of the progress of the reaction. Here, we show that increasing the number of TiSe 2 layers does not decrease the rate at which the SnSe 2 and PbSe layers alloy, suggesting that at these temperatures it is reduction of the SnSe 2 to SnSe and Se that is rate limiting in the formation of the alloy and not the associated diffusion of Sn and Pb through the TiSe 2 layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Advanced Characterization of Thin Film Solar Cells

Polycrystalline thin-film solar cells have reached a levelized cost of energy that is competitive with all other sources of electricity. The technology has significantly improved in recent years, with laboratory cell efficiencies for cadmium telluride (CdTe), perovskites, and copper indium gallium diselenide (CIGS) each exceeding 22 percent. Both CdTe and CIGS solar panels are now produced at the gigawatt scale. However, there are ongoing challenges, including the continued need to improve performance and stability while reducing cost. Advancing polycrystalline solar cell technology demands an in-depth understanding of efficiency, scaling, and degradation mechanisms, which requires sophisticated characterization methods. These methods will enable reseachers and manufacturers to improve future solar modules and systems. This work provides researchers with a concise overview of the status of thin-film solar cell technology and characterization. Chapters describe material systems and their properties and then provide an in-depth look at relevant characterization methods and the learning facilitated by each of these. Following an introductory chapter, the book provides systematic and thorough coverage of the following topics: trends to improve CdTe solar cell performance; Cu(In,Ga)Se2 and related materials; perovskite solar cells; photovoltaic device modelling; luminescence and thermal imaging of thin-film photovoltaic materials, devices, and modules; application of spatially resolved spectroscopy characterization techniques on Cu2ZnSnSe4 solar cells; time-resolved photoluminescence characterization of polycrystalline thin-film solar cells; fundamentals of electrical material and device spectroscopies applied to thin-film polycrystalline chalcogenide solar cells; nanometer-scale characterization of thin-film solar cells by atomic force microscopy-based electrical probes; scanning transmission electron microscopy characterization of solar cells; photoelectron spectroscopy methods in solar cell research; time-of-flight secondary-ion mass spectrometry and atom probe tomography; and solid-state nuclear magnetic resonance characterization for photovoltaic applications. The final chapter provides an overview and describes future prospects.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2018

Bacterial and Archaeal Viruses of Himalayan Hot Springs at Manikaran Modulate Host Genomes

Hot spring-associated viruses, particularly the archaeal viruses, remain under-examined compared to bacteriophages. Previous metagenomic studies of the Manikaran hot springs in India suggested an abundance of viral DNA, which prompted us to examine the virus–host (bacterial and archaeal) interactions in sediment and microbial mat samples collected from the thermal discharges. Here, we characterize the viruses (both bacterial and archaeal) from this Himalayan hot spring using both metagenomics assembly and electron microscopy. We utilized four shotgun samples from sediment (78–98°C) and two from microbial mats (50°C) to reconstruct 65 bacteriophage genomes (24–200 kb). We also identified 59 archaeal viruses that were notably abundant across the sediment samples. Whole-genome analyses of the reconstructed bacteriophage genomes revealed greater genomic conservation in sediments (65%) compared to microbial mats (49%). However, a minimal phage genome was still maintained across both sediment and microbial mats suggesting a common origin. To complement the metagenomic data, scanning-electron and helium-ion microscopy were used to reveal diverse morphotypes of Caudovirales and archaeal viruses. The genome level annotations provide further evidence for gene-level exchange between virus and host in these hot springs, and augments our knowledgebase for bacteriophages, archaeal viruses and Clustered Regularly Interspaced Short Palindromic Repeat cassettes, which provide a critical resource for studying viromes in extreme natural environments.

Caudovirales↗
DOE OSTI2021

Unconventional chiral charge order in kagome superconductor KV 3 Sb 5

Intertwining quantum order and non-trivial topology is at the frontier of condensed matter physics. A charge-density-wave-like order with orbital currents has been proposed for achieving the quantum anomalous Hall effect in topological materials and for the hidden phase in cuprate high-temperature superconductors. However, the experimental realization of such an order is challenging. Here we use high-resolution scanning tunnelling microscopy to discover an unconventional chiral charge order in a kagome material, KV 3 Sb 5 , with both a topological band structure and a superconducting ground state. Through both topography and spectroscopic imaging, we observe a robust 2 × 2 superlattice. Spectroscopically, an energy gap opens at the Fermi level, across which the 2 × 2 charge modulation exhibits an intensity reversal in real space, signalling charge ordering. At the impurity-pinning-free region, the strength of intrinsic charge modulations further exhibits chiral anisotropy with unusual magnetic field response. Therefore theoretical analysis of our experiments suggests a tantalizing unconventional chiral charge density wave in the frustrated kagome lattice, which can not only lead to a large anomalous Hall effect with orbital magnetism, but also be a precursor of unconventional superconductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Thickness-dependent polarization-induced intrinsic magnetoelectric effects in L a 0.67 S r 0.33 Mn O 3 / PbZ r 0.52 T i 0.48 O 3 heterostructures

The polarization of PbZr 0.52 Ti 0.48 O 3 thin film is switched by changing film thickness through the competition between the strain relaxation-induced flexoelectric fields and the interfacial effects. Without an applied electric field, this reversal of polarization is exploited to control the magnetic properties of La 0.67 Sr 0.33 MnO 3 by the competition/cooperation between the charge-mediated and the strain-mediated effects. Scanning transmission electron microscopy, polarized near-edge x-ray absorption spectroscopy, and half-integer diffraction measurements are employed to decode the intrinsic magnetoelectric effects in the La 0.67 Sr 0.33 MnO 3 /PbZr 0.52 Ti 0.48 O 3 heterostructures. Here, with PbZr 0.52 Ti 0.48 O 3 films <48nm, the polarization-driven carrier density modulation around the La 0.67 Sr 0.33 MnO 3 /PbZr 0.52 Ti 0.48 O 3 interface and the strain-mediated Mn 3d orbital occupancy work together to enhance the magnetism of 14-unit-cell La 0.67 Sr 0.33 MnO 3 film; with PbZr 0.52 Ti 0.48 O 3 layers > 48nm, the strain-induced change of bond length/angle of MnO 6 accompanied with a modified spin configuration are responsible for the decrease in the Curie temperature and magnetization of 14-unit-cell La 0.67 Sr 0.33 MnO 3 film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗