Search NASA⌕ Search

SEARCH · Search NASA

Results for “Modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Elastic properties of crystalline and liquid gallium at high pressures

The elastic properties of gallium, such as the bulk modulus B, the shear modulus G, and the Poisson's ratio {sigma}, are investigated and the relative change in the volume is determined in the stability regions of the Ga I, Ga II, and liquid phases at pressures of up to 1.7 GPa. The observed lines of the Ga I-Ga II phase transition and the melting curves of the Ga I and Ga II phases are in good agreement with the known phase diagram of gallium; in this case, the coordinates of the Ga I-Ga II-melt triple point are determined to be 1.24 {+-} 0.40 GPa and 277 {+-} 2 K. It is shown that the Ga I-Ga II phase transition is accompanied by a considerable decrease in the moduli B (by 30%) and G (by 55%) and an increase in the density by 5.7%. The Poisson's ratio exhibits a jump from typically covalent values of approximately 0.22-0.25 to values of approximately 0.32-0.33, which are characteristic of metals. The observed behavior of the elastic characteristics is described in the framework of the model of the phase transition from a 'quasi-molecular' (partially covalent) metal state to a 'normal' metal state. An increase in the Poisson's ratio in the Ga I phase from 0.22 to 0.25 with an increase in the pressure can be interpreted as a decrease in the degree of covalence, i.e., the degree of spatial anisotropy of the electron density along the bonds, whereas the large value of the pressure derivative of the bulk modulus (equal to approximately 8) observed up to the transition to the Ga II phase or the melt is associated not only with the quasicovalent nature of the Ga I phase but also with the structural features. In view of the presence of seven neighbors for each gallium atom in the Ga I phase, the gallium lattice can be treated as a structure intermediate between typical open-packed and close-packed structures. Premelting effects, such as a flattening of the isothermal dependence of the shear modulus G(p) with increasing pressure and an increase in the slope of the isobaric dependences G(T) with increasing temperature, are revealed in the vicinity of the melting curve. The bulk modulus of liquid gallium near the melting curve proves to be rather close to the corresponding values for the normal metal Ga II.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Integrating Experiments and Well Logs to Predict Caney Shale Static Mechanical Properties During Production with Supervised Machine Learning

Caney shale is one of the emerging oil reservoirs in Oklahoma. Understanding the impact of effective stress on its mechanical properties is critical for predicting hydraulic fracture geometry and overall hydrocarbon production. The objective of our study is to evaluate the impact of effective stress on the dynamic Young’s modulus using ultrasonic velocity measurements for Caney shale samples. A triaxial cell was utilized to measure ultrasonic (P-wave and S-wave) velocities for ten downhole Caney shale samples under various effective stresses to indirectly assess the impact of pore pressure change. The dynamic Young’s moduli estimated from these measurements were integrated with available conventional well logs (excluding sonic logs) and triaxial test results from Benge et al. (2021) to predict the static Young’s modulus using Random Forest (RF) and Extreme Gradient Boosting (XGBoost) models. The results showed that the estimated dynamic Young’s moduli from ultrasonic measurements were higher than the corresponding static Young’s modulus of cores from the same vertical well at similar depths. With increasing effective stress, the dynamic Young’s modulus increased for all samples. The estimated dynamic-to-static correction factor tended to be higher in zones of high neutron porosity (PHIN) and low density compared to other zones. Finally, SHapley Additive exPlanations (SHAP) for RF and XGBoost models identified depth, gamma ray (GR), and PHIN as key features for predicting the static Young’s modulus. This study enhances our understanding of the dynamic and static Young’s moduli for the Caney shale interval, as a function of effective stress and conventional well logs. The findings from this study can improve predictions of production throughout the well's lifespan by offering insights into the mechanical property degradation resulting from pore pressure depletion.

Kholy, Sherif M.↗

Simulation of Distortion and Residual Stress Development During Heat Treatment of Steel Castings

Heat treatment and associated processing, such as quenching, are critical during high strength steel casting production. These processes must be managed closely to prevent thermal and residual stresses that may result in distortion, cracking (particularly after machining), re-work, and weld repair. The risk of casting distortion limits aggressive quenching that can be beneficial to the process and yield an improved outcome. As a result of these distortions, adjustments must be made to the casting or pattern design, or tie bars must be added. Straightening castings after heat treatments can be both time-consuming and expensive. Residual stresses may reduce a casting's overall service performance, possibly resulting in catastrophic failure. Stress relieving may help, but expends additional energy in the process. Casting software is very limited in predicting distortions during heat treatment, so corrective measures most often involve a tedious trial-and-error procedure. An extensive review of existing heat treatment residual stress and distortion modeling revealed that it is vital to predict the phase transformations and microstructure of the steel along with the thermal stress development during heat treatment. After reviewing the state-of-the-art in heat treatment residual stress and distortion modeling, an existing commercial code was selected because of its advanced capabilities in predicting phase transformations, the evolving microstructure and related properties along with thermal stress development during heat treatment. However, this software was developed for small parts created from forgings or machined stock, and not for steel castings. Therefore, its predictive capabilities for heat treatment of steel castings were investigated. Available experimental steel casting heat treatment data was determined to be of insufficient detail and breadth, and so new heat treatment experiments were designed and performed, casting and heat treating modified versions of the Navy-C ring (a classical test shape for heat treatment experiments) for several carbon and low alloy steels in order to generate data necessary to validate the code. The predicted distortions were in reasonable agreement with the experimentally measured values. However, the final distortions in the castings were small, making it difficult to determine how accurate the predictions truly are. It is recommended that further validation of the software be performed with the aid of additional experiments with large production steel castings that experience significant heat treatment distortions. It is apparent from this research that the mechanical properties of the bonded sand used for cores and sand molds are key in producing accurate stress simulation results. Because of this, experiments were performed to determine the temperature-dependent elastic modulus of a resin-bonded sand commonly utilized in the steel casting industry. The elastic modulus was seen to vary significantly with heating and cooling rates. Also, the retained room temperature elastic modulus after heating was seen to degrade significantly when the sand was heated above 125°C. The elastic modulus curves developed in this work can readily be utilized in casting simulation software. Additional experiments with higher heating rates are recommended to determine the behavior of the elastic modulus in the sand close to the mold-metal interface. The commercial heat treatment residual stress and distortion code, once fully validated, is expected to result in an estimated energy savings of 2.15 trillion BTU's/year. Along with these energy savings, reduction of scrap and improvement in casting yield will result in a reduction of the environmental emissions associated with the melting and pouring of the metal which will be saved as a result of this technology.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Graphite Microstructural Characterization Using Time-Domain and Correlation-Based Ultrasonics

Among techniques that have been used to determine elastic modulus in nuclear graphites, ultrasonic methods have enjoyed wide use and standards using contacting piezoelectric tranducers have been developed to ensure repeatability of these types of measurements. However, the use of couplants and the pressures used to effectively couple transducers to samples can bias measurements and produce results that are not wholly related to the properties of the graphite itself. In this work, we have investigated the use of laser ultrasonic methods for making elastic modulus measurements in nuclear graphites. These methods use laser-based transmitters and receivers to gather data and do not require use of ultrasonic couplants or mechanical contact with the sample. As a result, information directly related to the elastic responses of graphite can be gathered even if the graphite is porous, brittle and compliant. In particular, we have demonstrated the use of laser ultrasonics for the determination of both Young’s modulus and shear modulus in a range of nuclear graphites including those that are being considered for use in future nuclear reactors. These results have been analyzed to assess the contributions of porosity and microcracking to the elastic responses of these graphites. Laser-based methods have also been used to assess the moduli of NBG-18 and IG-110 where samples of each grade were oxidized to produce specific changes in porosity. These data were used to develop new models for the elastic responses of nuclear graphites and these models have been used to infer specific changes in graphite microstructure that occur during oxidation that affect elastic modulus. Specifically, we show how ultrasonic measurements in oxidized graphites are consistent with nano/microscale oxidation processes where basal plane edges react more readily than basal plane surfaces. We have also shown the use of laser-based methods to perform shear-wave birefringence measurements and have shown how these measurements can be used to assess elastic anisotropy in nuclear graphites. Using models developed in this program, ultrasonic data were interpreted to extract orientation distribution coefficients that could be used to represent anisotropy in these materials. This demonstration showed the use of ultrasonic methods to quantify anisotropy and how these methods provide more detailed information than do measurements of thermal expansion – a technique commonly used for assessing anisotropy in nuclear graphites. Finally, we have employed laser-based, ultrasonic-correlation techniques in attempts to quantify aspects of graphite microstructure such as pore size and distribution. Results of these measurements indicate that additional work must be performed to make this ultrasonic approach viable for quantitative microstructural characterization.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Microstructural Characterization of FeCrAl C26M Tubes

The present report summarizes the initial nanoindentation characterization of a FeCrAl alloy, C26M. Microstructural analysis using electron backscatter diffraction showed a highly textured system with the axial surface favoring orientations near the [110] and the longitudinal surface near the [111]. A large spread of grain sizes was observed from a few μm’s to 100 μm with an average grain size of ~70 μm. Nanoindentation with a Berkovich tip measured a similar hardness and modulus of ~4.4 GPa and ~240 GPa on the two surfaces, respectively. Mounting specimens in epoxy was found to be the cause of a lower stiffness and, consequently, a lower hardness and modulus value. Spherical nanoindentation was measured on the longitudinal surface of the tube to determine the nanoindentation modulus and nanoindentation yield strength. Using a 10 μm tip, the measured modulus was ~220 GPa and the yield strength was ~1.4 GPa. Indentation with a 100 μm tip resulted in a measured modulus value of ~220 GPa and yield strength of ~1.1 GPa. Some early characterization of the differences in spherical nanoindentation response of the axial and longitudinal surfaces showed a small difference between the two, but a more detailed analysis with a stiffer mounting configuration is needed to draw conclusions.

36 MATERIALS SCIENCE↗

AGC-1 Sister Specimen Testing Data Report

The AGC-1 irradiation capsule will provide irradiation creep design data and data for the effects of irradiation creep on key physical properties of several candidate graphites for the Next Generation Nuclear Plant (NGNP). A further objective of the AGC-1 creep capsule is to provide design data for the effects of neutron irradiation on the properties of a range of NGNP candidate graphites, Characterization, both non-destructively and destructively, of AGC-1 graphite creep “sister” specimens for the major grades, i.e., NBG-17, NBG-18, H-451, PCEA, IG-110, and IG-430 has been performed and is reported here. The properties measured were: bulk density by mensuration and Hg-immersion; tensile properties, including strength, stress-strain behavior, static Young’s modulus, and strain to failure; compressive properties, including strength, stress-strain behavior, static elastic modulus, and strain to failure; elastic constants, including dynamic Young’s modulus (fundamental frequency method), and sonic elastic constants, including Young’s modulus, shear modulus, and Poisson’s ratio; pore size distribution (by Hg-intrusion); crystal structure (by x-ray diffraction, XRD); specific heat (elevated temperature), and thermal conductivity (elevated temperature). Significant differences were noted in the physical properties between the grades examined and are attributed to factors such as density, structure (filler particle size and pore size) and the forming method. Some difficulties were encountered with mechanical testing of small (sub-standard) size specimens due to volume and grain size-section size effects. These difficulties are well understood and are an inevitable consequence of conducting property evaluations on small irradiation specimens. These data are judged to be sufficient to yield adequate fractional change in properties when combined with post-irradiation characterization data. However, the complication associated with small specimen testing reinforces the need to conduct full characterization programs to establish the baseline design properties of the NGNP candidate graphites. A sufficient body of experimental data has been acquired from the AGC-1 creep “sister” specimens to fully characterize the properties of interest for the major grades included in the AGC-1 capsule. These data, in combination with the pre-irradiation characterization data packages for the actual AGC-1 creep and control specimens, provide a sound and sufficient pre-irradiation data set for determination of the effects of irradiation induced dimensional change and creep strain on the physical properties of the nuclear graphite grades in the AGC-1 capsule.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

First-principles studies of Al-Ni intermetallic compounds

The structural properties, heats of formation, elastic properties, and electronic structures of Al-Ni intermetallic compounds are analyzed here in detail by using density functional theory. Higher calculated absolute values of heats of formation indicate a very strong chemical interaction between Al and Ni for all Al-Ni intermetallic compounds. According to the computational single crystal elastic constants, all the Al-Ni intermetallic compounds considered here are mechanically stable. The polycrystalline elastic modulus and Poisson's ratio have been deduced by using Voigt, Reuss, and Hill (VRH) approximations, and the calculated ratio of shear modulus to bulk modulus indicated that AlNi, Al{sub 3}Ni, AlNi{sub 3} and Al{sub 3}Ni{sub 5} compounds are ductile materials, but Al{sub 4}Ni{sub 3} and Al{sub 3}Ni{sub 2} are brittle materials. With increasing Ni concentration, the bulk modulus of Al-Ni intermetallic compounds increases in a linear manner. The electronic energy band structures confirm that all Al-Ni intermetallic compounds are conductors. - Graphical abstract: Calculated bulk modulus compared to experimental and other theoretical values for the Al-Ni intermetallic compounds.

36 MATERIALS SCIENCE↗

Investigation of the Mechanical Properties of GdBa{sub 2}Cu{sub 3}O{sub 7−δ} Added with Nanosized Ferrites ZnFe{sub 2}O{sub 4} and CoFe{sub 2}O{sub 4} Using Ultrasonic Measurement

Recently, there is much interest in studying the effect of nanosized ferrites addition on high- T{sub c} superconductors. However, little information is available on the mechanical properties. We have investigated the effect of (CoFe{sub 2}O{sub 4}){sub x} and (ZnFe{sub 2}O{sub 4}){sub x} nanosized ferrites with 0.01 ≤ x ≤ 0.40 on the mechanical properties of the high- T{sub c} superconducting compound GdBa{sub 2}Cu{sub 3}O{sub 7−δ} (Gd-123) prepared by the conventional solid-state reaction technique. Elastic parameters including shear modulus (G), bulk modulus (B), and Young’s modulus (E) of all samples were inspected using ultrasonic measurements and compared with Vickers microhardness results. Furthermore, the porosity of the samples was investigated and correlated to Young’s modulus, which was corrected to zero porosity using different models. The corrected values were correlated with Vickers microhardness. Moreover, the Debye temperature (θ{sub D}) and the electron-phonon coupling factor (λ) were also determined as a function of x. We observed that the different nanoparticles addition has influenced the Gd-123 compound differently. For (ZnFe{sub 2}O{sub 4}){sub x} added samples, the mechanical properties and Debye temperature improved up to x = 0.06, then deteriorated with further addition. However, (CoFe{sub 2}O{sub 4}){sub x} addition improved the mechanical properties for all samples with x up to 0.40. We found that the proportionality constant between the corrected values of E and H{sub v} and G and H{sub v} are strongly dependent on the porosity corrections and the kind of superconducting material. This indicates that the widely used formula E = 81.96 H{sub v} may not be valid for all types of superconducting materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic, Mechanical, and Electronic Properties of RhH{sub x} (x = 0, 0.25, 0.75, 1) from First-Principles Calculations

The magnetic, mechanical, and electronic properties of RhH{sub x} (x = 0, 0.25, 0.75, 1) have been investigated by first-principles calculations based on density functional theory. It is shown that RhH{sub x} (x = 0.25, 0.75, 1) in the cubic structure are magnetic except for Rh. The total magnetic moments of RhH{sub x} (x = 0.25, 0.75, 1) decrease with increasing content of H, which mainly results from the change of the Rh moments. The calculated elastic constants indicate that RhH{sub x} (x = 0, 0.25, 0.75, 1) in the cubic structure are mechanically stable. With increasing H content, the bulk modulus, shear modulus, and Young modulus gradually decrease except the bulk modulus of RhH. By means of the values of the B/G ratio, it is concluded that H doping improves the ductile properties of Rh. The strong hybridization between H-s and Rh-d is the origin of magnetism for RhH{sub x} (x = 0.25, 0.75, 1) and decreases with increasing H content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First Principle Mechanical and Thermodynamic Properties of Some TbX (X = S, Se) Compounds

The mechanical and thermodynamic results of some terbium chalcogenides, TbX (X = S, Se) compounds have been examined using full-potential linear augmented plane wave (FP-LAPW) method based on density functional theory. The local spin density approximation with Hubbard potential (LSDA+U) has been used for proper treatment of 4f-electrons of Tb. The magnetic moment of TbS and TbSe was calculated to be 5.44μ{sub B} and 5.57μ{sub B}, respectively. The ground state properties such as lattice parameter, bulk modulus, and pressure derivative of bulk modulus were obtained and found in good agreement with already available theory and experiment results. The mechanical properties such as Young modulus (E), shear modulus (G), Poisson ratio (υ), Cauchy pressure and B/G ratio were also predicted. Further, in thermodynamic properties, Debye temperatures (θ{sub D}), specific heats at constant volume(C{sub V}), thermal expansion co-efficient (α), and entropies (S) and their behavior with high temperature(0–1200 K) and pressure (0–50 GPa) were also predicted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plate motion in sheared granular fault system

Plate motion near the fault gouge layer, and the elastic interplay between the gouge layer and the plate under stick-slip conditions, is key to understanding the dynamics of sheared granular fault systems. Here, a two-dimensional implementation of the combined finite-discrete element method (FDEM), which merges the finite element method (FEM) and the discrete element method (DEM), is used to explicitly simulate a sheared granular gouge fault system. In this work we focus on investigating the influence of normal load, driving shear velocity and plate stiffness on the velocities and displacements in the direction parallel to the shear direction (x-direction) measured at locations on the upper and lower plates just adjacent to the gouge. The simulations show that during slip phases the magnitudes of the measured velocities on the upper and lower plates are proportional to the normal load and may be inversely proportional to the square root of the plate's shear modulus. Whereas, the driving shear velocity does not show distinct influence on the measured velocities. Additionally, large slip velocities are generally associated with large macroscopic friction coefficient drops. For the models subjected to smaller normal loads, larger shear velocities and with stiffer shear plates, the same magnitude of slip velocity could cause a larger drop of macroscopic friction coefficient. During stick phases, the velocities of the upper and lower plates are respectively slightly greater and slightly smaller than half of the driving shear velocity and are both in the same direction of shear. The shear strain rate of the gouge is calculated from this velocity difference between the upper and lower plate during stick phases and thus the gouge effective shear modulus can be calculated. The results show that the gouge effective shear modulus increases proportionally with normal load, while the influence of shear velocity and plate stiffness on gouge effective shear modulus is minor. The simulations address the dynamics of a laboratory-scale fault gouge system and may aid in revealing the complexities of earthquake frictional dynamics.

58 GEOSCIENCES↗

Full potential study of the elastic, electronic, and optical properties of spinels MgIn{sub 2}S{sub 4} and CdIn{sub 2}S{sub 4} under pressure effect

The structural, elastic, electronic, and optical properties of cubic spinel MgIn{sub 2}S{sub 4} and CdIn{sub 2}S{sub 4} compounds have been calculated using a full relativistic version of the full-potential linearized-augmented plane wave with the mixed basis FP/APW+lo method. The exchange and correlation potential is treated by the generalized-gradient approximation (GGA). Moreover, the Engel-Vosko GGA formalism is also applied to optimize the corresponding potential for band structure calculations. The ground state properties, including the lattice constants, the internal parameter, the bulk modulus, and the pressure derivative of the bulk modulus are in reasonable agreement with the available data. Using the total energy-strain technique, we have determined the full set of first-order elastic constants C{sub ij} and their pressure dependence, which have not been calculated or measured yet. The shear modulus, Young's modulus, and Poisson's ratio are calculated for polycrystalline XIn{sub 2}S{sub 4} aggregates. The Debye temperature is estimated from the average sound velocity. Electronic band structures show a direct band gap ({Gamma}-{Gamma}) for MgIn{sub 2}S{sub 4} and an indirect band gap (K-{Gamma}) for CdIn{sub 2}S{sub 4}. The calculated band gaps with EVGGA show a significant improvement over the GGA. The optical constants, including the dielectric function {epsilon}({omega}), the refractive index n({omega}), the reflectivity R({omega}), and the energy loss function L({omega}) were calculated for radiation up to 30 eV. -- Graphical abstract: Calculated total and partial densities of states for MgIn{sub 2}S{sub 4} and CdIn{sub 2}S{sub 4}

36 MATERIALS SCIENCE↗

Theoretical investigations of the physical properties of zircon-type YVO{sub 4}

The crystal structure, electronic properties, elastic properties, hardness and thermodynamic properties of the laser host material zircon-type YVO{sub 4} are studied using the pseudopotential plane wave method within the local density approximation (LDA) and generalized gradient approximation (GGA). The calculated ground state values such as lattice parameter, bulk modulus and its pressure derivative, the band structure and densities of states were in favorable agreement with previous works and the existed experimental data. The elastic constants C{sub ij}, the aggregate elastic moduli (B, G, E), Poisson's ratio and elastic anisotropy have been investigated. In YVO{sub 4}, V-O bonds with shorter bond length and larger Mulliken population make great contribution to hardness than Y-O bonds. Using quasi-harmonic Debye model considering the phonon effects, bulk modulus, heat capacity and thermal expansion coefficient of YVO{sub 4} are calculated within a range of 0-6 GPa and 0-1200 K. - Graphical Abstract: (a) Directional dependence of Young's modulus in zircon-type YVO{sub 4} and (b) projections of the directional dependent Young's modulus in different planes for zircon-type YVO{sub 4}. The units are in GPa. Highlights: Black-Right-Pointing-Pointer This paper systematically studied the physical properties of zircon-type YVO{sub 4} from first-principles calculations. Black-Right-Pointing-Pointer Zircon-type YVO{sub 4} is mechanically stable and it is ductile for B/G>1.75 and v>0.26. Black-Right-Pointing-Pointer Universal elastic anisotropy index A{sup U} for zircon-type YVO{sub 4} is 2.41, so YVO{sub 4} is anisotropic. Black-Right-Pointing-Pointer V-O bonds with shorter bond length and larger Mulliken population make greater contribution to the hardness of YVO{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elastic and electronic properties of the Ti{sub 5}X{sub 3} (X=Si, Ge, Sn, Pb) compounds from first-principles calculations

The structural stabilities, elastic and electronic properties of Ti{sub 5}X{sub 3} (X=Si, Ge, Sn, Pb) compounds with D8{sub 8} structure have been systematically investigated within the frame work of density functional theory. With increase of atomic number of the element X, the calculated lattice constants of Ti{sub 5}X{sub 3} compounds are found to increase, while stabilities of these compounds decrease because the formation enthalpies increase. Moreover, with exception of C{sub 12}, the calculated elastic constants C{sub ij} are reduced with increase of atomic number of element X, the bulk, shear, Young's modulus and Debye temperature are also lowered, while Poisson's ratio is larger, and the ductility is slightly improved. The elastic anisotropies were further studied, especially the 3D direction dependence of these elastic modulus was visually described. The density of states and charge density distribution reveal bonding feature of Ti{sub 5}X{sub 3}. Especially, the X-X and Ti-X covalent bonding strength is found to decrease with increase of atomic number of element X. - Graphical abstract: The charge density contour plots on the (0 0 0 1) plane for Ti{sub 5}Si{sub 3} (a), Ti{sub 5}Ge{sub 3} (b), Ti{sub 5}Sn{sub 3} (c) and Ti{sub 5}Pb{sub 3} (d). Highlights: Black-Right-Pointing-Pointer The elastic constants except C{sub 12} were lowered with increase of atomic number of X. Black-Right-Pointing-Pointer The bulk and shear modulus as well as Young's modulus was also decreased. Black-Right-Pointing-Pointer The elastic anisotropies of Ti{sub 5}X{sub 3} were further studied visually. Black-Right-Pointing-Pointer The X-X and Ti-X covalent bonding strength was lowered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoindentation mapping defects filtration for heterogeneous materials using generative adversarial networks

Advanced composite materials with multiple phases and heterogeneous microstructure necessitate spatial mapping characterization of elastic modulus to develop constitutive relations and overall mechanical response. Such modulus mapping can be obtained using the nanoindentation technique, where the indenter tip raster over the selected microstructure region. Typically, a surface preparation procedure is done in the specimens to ensure proper contact between the indenter tip and sample surface. However, a near-perfect surface finish is unachievable in heterogeneous materials, primarily with ceramic reinforcements, due to the differential material removal rate during polishing. Thus, the nanoindenter records localized erroneous measurements due to differences in surface roughness and corresponding force response. This study establishes a novel deep learning-based strategy to rectify incorrect experimental spatial measurements acquire during nanoindentation modulus mapping. Here, the integrated bicubic interpolation and generative adversarial networks (GANs) model was trained using 14 ceramic and 18 metallic data sets, each comprising 65,536 measurements. The developed algorithm was validated against experimental measurements on four unknown specimens. The standard deviation in measured elastic modulus reduces by ~50% in ceramics and ~72% in metallic samples. This computational framework proposes a novel approach to reducing uncertainty in materials’ properties using state-of-the-art computer vision techniques.

36 MATERIALS SCIENCE↗

Characterization of Polyamide Thin Films by Atomic Force Microscopy

This study directly compares the mechanical behavior of novel molecular layer deposition (MLD) and analogous interfacial polymerization (IP) polyamide thin films in environments relevant to reverse osmosis (RO) membrane operation. The elastic modulus of the films was determined using atomic force microscopy (AFM) in dry, hydrated, and chlorinated states. Surface roughness characteristics were also obtained given their potential influence on AFM modulus measurements. The much smoother MLD films demonstrated a statistically higher modulus in all states as compared to their IP counterparts. The MLD films maintained a modulus ~3X and ~5X greater than that of IP films after hydration and chlorination, respectively. Such differences in behavior may be due to the higher density and correspondingly lower void content of the MLD films. Results from this study provide a rationale for future development of MLD for fabrication of polyamide films for incorporation in RO membranes.

atomic force microscopy↗

Atomic force microscopy based nanoindentation study of onion abaxial epidermis walls in aqueous environment

An atomic force microscopy based nanoindentation method was employed to study how the structure of cellulose microfibril packing and matrix polymers affect elastic modulus of fully hydrated primary plant cell walls. The isolated, single-layered abaxial epidermis cell wall of an onion bulb was used as a test system since the cellulose microfibril packing in this cell wall is known to vary systematically from inside to outside scales and the most abundant matrix polymer, pectin, can easily be altered through simple chemical treatments such as ethylenediaminetetraacetic acid and calcium ions. Experimental results showed that the pectin network variation has significant impacts on the cell wall modulus, and not the cellulose microfibril packing.

36 MATERIALS SCIENCE↗