Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multi-dimensional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Influence of NOx Chemistry on the Prediction of Natural Gas End-Gas Autoignition

Research on the influence of NOx (NO/NO2) chemistry on HC oxidation has shown that NOx plays an important role in the promotion/inhibition of HC autoignition [1-6]. Current data for n-heptane, iso-octane, ethanol, and toluene [3, 4] have shown that NO chemistry inhibits autoignition at low temperatures and concentrations. However, at medium and high temperatures and low concentrations, autoignition is promoted, decreasing the Negative Temperature Coefficient (NTC) effect. This autoignition promotion, however, becomes weaker as NO concentrations are increased. Additionally, fundamental kinetics studies have suggested that NOx chemistry also promotes the autoignition of smaller HC, such as CH4 [7-10], C2H6 [11-14], and C3H8 [15]. Additionally to the chemical kinetics studies, a growing body of evidence supports the importance of NOx chemistry on SI engine simulations [16, 17]. Foong et al. [18] suggested that the addition of NO in their models significantly improved the agreement between simulations and experiments where the onset of knock was advanced due to the presence of NO, and Morganti et al. [19] showed that NO addition in the residual-gas was necessary for their models to obtain good agreement with experimental data. Lastly, Mohr et al. [20, 21] investigated the effect of Natural Gas (NG) reactivity and EGR substitution rate and composition on homogeneous ignition delay, flame speeds, and EGAI for stoichiometric NG/oxidizer/EGR blends. They observed that the addition of EGR composed of only inert species (CO2 and Ar) suppressed homogeneous autoignition in all NG fuels tested under all conditions. However, for all NG fuels tested, increasing EGR rates with reactive species (Ar, CO2, CO, and NO) promoted homogeneous autoignition under all conditions, thus reproducing the same trends for various NG fuel compositions that were observed in other studies and fuels. For this reason, a study is being conducted to analyze the effects of NOx chemistry on the prediction of NG/air/EGR homogeneous autoignition. This study has been divided into two tasks. First, the addition of NOx chemistry to the ARIES82 mechanism [20] is being validated using homogeneous ignition delay data collected by Mohr [20, 21]. Second, once the new modified mechanism with NOx reactions has been validated, it will be employed on engine multi-dimensional modeling presented in [22, 23] to analyze the influence of NOx chemistry on NG EGAI. Results thus far have shown that homogeneous ignition delay calculations are sensitive to NOx chemistry, where the modified mechanisms captured well all trends and closely matched the homogeneous ignition delays observed by Mohr et al. Also, the results in this work suggest that NOx chemistry is necessary to correctly capture the trends in NG homogeneous autoignition when EGR with reactive species is used since the opposite behavior is observed when only inert species are considered for the EGR composition.

03 NATURAL GAS↗

Understanding and Explicitly Measuring Linguistic and Stylistic Properties of Deception via Generation and Translation

Massive digital disinformation is one of the main risks of modern society. Hundreds of models and linguistic analyses have been done to compare and contrast misleading and credible content online. However, most models do not remove the confounding factor of a topic or narrative when training, so the resulting models learn a clear topical separation for misleading versus credible content. We study the feasibility of using two strategies to disentangle the topic bias from the models to understand and explicitly measure linguistic and stylistic properties of content from misleading versus credible content. First, we develop conditional generative models to create news content that is characteristic of different credibility levels. We perform multi-dimensional evaluation of model performance on mimicking both the style and linguistic differences that distinguish news of different credibility using machine translation metrics and classification models. We show that even though generative models are able to imitate both the style and language of the original content, additional conditioning on both the news category and the topic leads to reduced performance. In a second approach, we perform deception style ``transfer" by translating deceptive content into the style of credible content and vice versa. Extending earlier studies, we demonstrate that, when conditioned on a topic, deceptive content is shorter, less readable, more biased, and more subjective than credible content, and transferring the style from deceptive to credible content is more challenging than the opposite direction.

Saldanha, Emily G.↗

Method for fabricating embedded nanostructures with arbitrary shape

A layered heterostructure, comprising alternating layers of different semiconductors, wherein one of the atom species of one of the semiconductors has a faster diffusion rate along an oxidizing interface than an atom species of the other semiconductor at an oxidizing temperature, can be used to fabricate embedded nanostructures with arbitrary shape. The result of the oxidation will be an embedded nanostructure comprising the semiconductor having slower diffusing atom species surrounded by the semiconductor having the higher diffusing atom species. The method enables the fabrication of low- and multi-dimensional quantum-scale embedded nanostructures, such as quantum dots (QDs), toroids, and ellipsoids.

Wang, George T.↗

The quest to understand the fundamental structure of nuclear matter – outlook to QCD and the Electron-Ion Collider

Nuclear matter is made of quarks that are bound by gluons that also bind themselves. Unlike with the more familiar atomic and molecular matter, the interactions and structures in nuclear matter are inextricably mixed up, and observed properties of nucleons and nuclei, such as mass and spin, emerge out of this complex system. Ongoing and future QCD research offers the exciting prospect to obtain a multi-dimensional picture of the inner quark-gluon structure of protons and atomic nuclei and to inform us how the properties and structure of nuclear matter have emerged from the dynamics of QCD. This program is initiated at the 12-GeV Upgraded Jefferson Lab, concentrating on imaging the region in nucleon and nuclear structure where quarks prevail. A future Electron-Ion Collider (EIC) is planned at Brookhaven National Lab, in partnership with Jefferson Lab. The EIC will have a versatile range of beam energies, polarizations, and ion species, as well as high luminosity, to precisely image quarks, gluons, and their interactions in protons and complex atomic nuclei. The goal is an understanding of the internal structure of nuclear matter comparable to our knowledge of the electronic structure of atoms. The present status of the EIC will also be presented.

Ent, Rolf↗

Fission Product Transport in TRISO Particles and Pebbles

This document demonstrates completion of the goals described in the technical narrative of the FOA project titled: ”Modeling and Simulation Development Pathways to Accelerating KP-FHR Licensing” regarding fission product transport in the Kairos-proposed fuel pebble by INL and Kairos Power. Showcased in this report are code developments and simulations in BISON that extend the state of the art in computation and understanding of fission product transport in a TRISO fuel particle and pebble. These enhancements lay the foundation for making predictions of fission product transport that can be used as input in the fuel licensing process. This was achieved by installing existing fuel material models originally used in PARFUME, developing a new failure probability method that is efficient and multi-dimensional, employing material homogenization, and expanding verification and validation simulations to demonstrate the efficacy of the work. All this work is leveraged to spotlight the main deliverable; a three-dimensional model and corresponding demonstration simulation of a pebble, which will serve as the starting point for models used to predict fission product release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tracking Radioactive Isotopes in HVAC and Application for Hot Cell Analyses - 20155

In recent years, the surge in the number of isotope production facilities under design has increased the need to analyze isotope migration in facility Heating, Ventilation, and Air Conditioning (HVAC) during normal operations and accident scenarios. These facilities are used to produce isotopes for medical, security, and industrial applications and as such are subject to license and regulatory requirements 10CFR20, 10CFR30, 10CFR50, and 10CFR70. GOTHIC, a general-purpose thermal-hydraulics software package, includes the ability to model isotopic tracers, radioactive decay and isotope migration as well as HEPA and charcoal filters for isotope retention. A GOTHIC model was developed by Zachry Nuclear Engineering (ZNE) to examine the effect of negative room pressure, HEPA filtration, and HVAC fluctuations on radiation areas, hot cells and gloveboxes. Radioactive tracers were used to simulate the concentration of spills within contaminated areas, track the migration of isotopes of interest, and determine the isotopic retention and buildup on facility HEPA filters. A variety of isotopes with concern to dose (e.g., Kr-85, Sr-90, I-131, etc.), including their decay and progeny, are included in the analysis. Negative pressures are maintained in the regions of interest by a representative central HVAC system equipped with a volumetric fan that exhausts to the environment after a series of isolation valves and HEPA filters. GOTHIC is an industry trusted tool for providing engineering solutions for a variety of applications, including fission product tracking, aerosol and particulate transport and ventilation assessments. The software provides an integrated analysis environment that includes a graphical user interface (GUI) for constructing analysis models, a numerical solver that includes parallel processing capabilities and a post-processor for evaluating simulation results. It solves the conservation equations for mass, momentum and energy for multicomponent, multi-phase flow in lumped parameter and multi-dimensional geometries (1, 2, or full 3D), including the effects of turbulence, diffusion and buoyancy. It has been developed and maintained under a Quality Assurance program in compliance with the requirements of 10CFR50 Appendix B and applicable portions of ASME NQA-1 since 1995. GOTHIC has been used for assessing both forced and natural convection conditions for a wide range of applications, including: - Tracking concentration of hazardous gases and chemicals for habitability and safety assessments - Determining ventilation and filtration requirements and optimizing location and arrangement of these systems - Room heat-up, including diverse and Flexible coping strategies for Extended Loss of AC Power (FLEX/ELAP) - Equipment Qualification (EQ) A distinctive feature of GOTHIC is the ability to track many different fields/substances in a simulation, including user defined tracer elements, in the liquid, vapor and droplet fields as well as surfaces and filters. This capability allows GOTHIC to model fission product transport and release or the removal of particulates or harmful toxins from exhaust gases using a spray scrubber or other types of filtration systems. GOTHIC also includes models for engineered equipment, such as fans, filters, charcoal filters, dryers/demisters, dampers, etc. The aerosols and other filtered material are removed or accumulated in these components. The range of aerosol and radiological applications that GOTHIC has been used for includes: - Source Term: Primary Coolant (Equilibrium) Activity; Non-Water Coolant Source/Leakage. - Conditions for Iodine Re-evolution: Sump/Suppression Pool Conditions and pH; - RWST Conditions and pH. - Isotope Removal Mechanisms: Containment Sprayed and Unsprayed Region Mixing; Charcoal Filter Heating due to Iodine decay. - Radionuclide Transport and Decay: Post-LOCA Release in containment; Transport between connected Compartments and vent systems; Groundwater transport of radionuclides. - Non-Newtonian Fluid modeling for sludge, waste tanks, etc. ADAMS ML071581053 (titled 'Best Practice Guidelines for the use of CFD in Nuclear Reactor Safety Applications') poses guidelines for applying single phase CFD codes in nuclear reactor safety problems and GOTHIC is listed as a 'tool for 3D flows' and 'dispersal and deposition of radionuclides.' The Nuclear Quality Assurance (NQA) pedigree of GOTHIC is an important aspect for applications in the nuclear industry. The fundamental tracer models (convective transport, molecular and turbulent diffusion, removal mechanisms, etc.) have been verified using analytical solutions and validated against applicable separate effects tests. Also, GOTHIC has been benchmarked to many integrated effects tests, including Phebus FP (Fission Product). GOTHIC gives good agreement for the buildup and decay of fission products in Phebus Test 3. The model developed by ZNE demonstrates GOTHIC's applicability and acceptability for use in analyzing the migration and retention of radioactive isotopes and their progeny in normal operation and accident scenario analyses for isotope production facilities, hot cells, and gloveboxes. The tracer activities calculated by GOTHIC can then be used in downstream radiation transport and shielding codes like RADTRAD-NAI{sup C}, MCNP{sup R}, and MicroShield{sup R} to determine on-site and of-site doses. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The MOOSE fluid properties module

The fluid properties module in MOOSE~\cite{lindsay2022moose} serves a variety of fluid simulation applications based on MOOSE, including the MOOSE Navier Stokes module~\cite{moose_ns}, Pronghorn~\cite{pgh}, the MOOSE thermal hydraulics module, SAM~\cite{sam}, RELAP-7~\cite{relap7}, Sockeye~\cite{sockeye}, Pronghorn-subchannel~\cite{subchannel} and the MOOSE porous flow module~\cite{porous}. These applications are used to solve coarse mesh multi-dimensional thermal-hydraulics~\cite{pgh}, 1D systems analysis~\cite{sam,relap7} in nuclear reactor analysis, heat pipe modeling~\cite{sockeye} and porous flow simulations~\cite{porous} for underground gas storage and water seepage. The use of consistent fluid properties across fluid flow applications facilitates coupled flow simulations~\cite{anl_sam_pgh,osti_1889653}. Each application has historically driven the implementation of several fluid properties, which were later extended to be compatible with other applications. The unique diversity of applications of the module, due to its presence in MOOSE, has driven its expansion to new fluids, such as advanced nuclear reactor coolants and, more recently, arbitrary functions or tables-based property definitions, as detailed in section~\ref{content}, as well as numerous thermophysical properties and variable sets, as detailed in subsection~\ref{sec:prop}. The need for different discretizations of flow equations based on the compressibility of the fluid has motivated support for both primitive (pressure- and temperature-based) and conservative (internal energy- and specific volume-based) flow variables in the module. Thermodynamic relations are used to convert between these two formulations, as needed. The module serves a dual purpose of providing fluid properties for direct use in flow simulations and facilitating the implementation of user-specific fluid properties. Contributions of new properties for existing fluids or new fluids are strongly encouraged.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Latest developments in the MOOSE fluid properties module

The fluid properties module in MOOSE serves a variety of fluid simulation applications based on MOOSE, including the MOOSE Navier Stokes module~\cite{moose_ns}, Pronghorn~\cite{pgh}, SAM~\cite{sam}, the MOOSE thermal hydraulics module, RELAP-7~\cite{relap7} and subchannel~\cite{subchannel}. It is used for coarse mesh multi-dimensional thermal-hydraulics~\cite{pgh}, 1D systems analysis~\cite{sam,relap7} in nuclear reactor analysis, and porous flow simulations~\cite{porous} for underground gas storage and water seepage. The use of consistent fluid properties across fluid flow applications facilitates coupled simulations~\cite{anl_sam_pgh}. The module offers a consistent set of interfaces to implement to create a new fluid property. There are numerous fluid properties of interest in the entirety of all fields of fluid flow simulations, and this is exacerbated by the use of different variable sets depending on the compressibility of the fluid. For single-phase fluids, the following variable sets may be used to compute fluid properties: (pressure, temperature) and (specific volume, specific internal energy). Some properties may also be computed using the (pressure, density) or the (specific volume, specific enthalpy) variable sets. In order to reduce the challenge of adding a new fluid property, properties may be implemented partially.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Development of Segregated Thermal-Hydraulics Solvers in MOOSE

The simulation of fluid flows is an essential part of the design and analysis of nuclear systems. Algorithms able to simulate flows at different fidelity levels are available in the Multiphysics Object-Oriented Simulation Environment (MOOSE) and MOOSE-based applications such as Pronghorn \cite{novak2018pronghorn}, Pronghorn-Subchannel, RELAP-7, and SAM. Currently, significant effort is being invested in the development of coarse-mesh Computational Fluid Dynamics (CFD) capabilities within MOOSE and Pronghorn for the simulation of Generation IV nuclear reactors. Traditionally, the solution algorithms in MOOSE have relied on Newton or quasi-Newton methods (such as the preconditioned Jacobian-free Newton-Krylov method) where residuals and Jacobians (or approximations thereof) are constructed. Both Newton and quasi-Newton methods require the solution of a linear system at each nonlinear Newton iteration with the Jacobian as the system matrix. The Jacobian contains blocks originating from all variables in the problem (i.e., for thermal-hydraulics at least pressure, velocities, and temperature). Due to the formulation of the problem in a general multiphysics setting on unstructured mesh, creating a good preconditioner for the linear system can be challenging, thus many fluid applications have utilized direct solver-based methods such as LU factorization. However, with increasing system size and complexity in multi-dimensional problems, the direct solution of linear systems becomes computationally expensive both in execution time and and memory. For this reason, recent effort has focused on adapting segregated solution algorithms for CFD problems in MOOSE. These algorithms use fixed-point iteration between segregated systems whose assembly and preconditioning are easier those of the monolithic system. Initial results show that the segregated solution algorithm outperforms the monolithic approach in terms of memory usage and for large 3D problems in terms of CPU time as well.

42 ENGINEERING↗

Development of Segregated Thermal-Hydraulics Solvers in MOOSE

The simulation of fluid flows is an essential part of the design and analysis of nuclear systems. Algorithms able to simulate flows at different fidelity levels are available in the Multiphysics Object-Oriented Simulation Environment (MOOSE) and MOOSE-based applications such as Pronghorn \cite{novak2018pronghorn}, Pronghorn-Subchannel, RELAP-7, and SAM. Currently, significant effort is being invested in the development of coarse-mesh Computational Fluid Dynamics (CFD) capabilities within MOOSE and Pronghorn for the simulation of Generation IV nuclear reactors. Traditionally, the solution algorithms in MOOSE have relied on Newton or quasi-Newton methods (such as the preconditioned Jacobian-free Newton-Krylov method) where residuals and Jacobians (or approximations thereof) are constructed. Both Newton and quasi-Newton methods require the solution of a linear system at each nonlinear Newton iteration with the Jacobian as the system matrix. The Jacobian contains blocks originating from all variables in the problem (i.e., for thermal-hydraulics at least pressure, velocities, and temperature). Due to the formulation of the problem in a general multiphysics setting on unstructured mesh, creating a good preconditioner for the linear system can be challenging, thus many fluid applications have utilized direct solver-based methods such as LU factorization. However, with increasing system size and complexity in multi-dimensional problems, the direct solution of linear systems becomes computationally expensive both in execution time and and memory. For this reason, recent effort has focused on adapting segregated solution algorithms for CFD problems in MOOSE. These algorithms use fixed-point iteration between segregated systems whose assembly and preconditioning are easier those of the monolithic system. Initial results show that the segregated solution algorithm outperforms the monolithic approach in terms of memory usage and for large 3D problems in terms of CPU time as well.

42 ENGINEERING↗

An open-source hybrid unstructured mesh - CAD fusion multiphysics analysis workflow in SALAMANDER

Plasma facing components in fusion devices will endure extreme neutron and heat fluxes. To facilitate their design using simulation tools, the open-source Fusion Module, Fusion ENergy Integrated multiphys-X (FENIX) framework is being developed to model these components with a high-fidelity multi-physics multi-dimensional approach. It can iteratively resolve couplings between all the physics at play, from neutron radiation, to thermomechanics, to near-wall plasma dynamics. This framework is based on the Multiphysics Object Oriented Simulation Environment (MOOSE), which is developed by a collaboration of US National Laboratories since 2008, for advanced nuclear, geomechanics simulations and other applications. FENIX couples numerous simulation tools, including OpenMC, the Tritium Migration Analysis Program v8, the NekRS CFD software, and most MOOSE modules. For the coupling of radiation transport and other physics, FENIX supports a hybrid workflow between Computer Assisted Design (CAD) and unstructured mesh geometries. The CAD can be generated from skinning the unstructured mesh, to enable a coarse geometry for efficient particle transport, but still resolving the local material compositions and temperature gradients. Neutron transport is performed using DAGMC on the CAD, and Cardinal, integrated in FENIX, maps tallied quantities, such as the heat deposition or the tritium generation rates, from a tally volumetric mesh to the other physics’ unstructured mesh. This coupling was exercised on a simplified tokamak geometry, coupling neutron transport with the heat conduction equation, and on a monoblock divertor problem, coupling additionally with tritium migration. Mesh convergence studies highlight the importance of the mapping conservativeness. Coupling with thermo-mechanics is further enabled by the generalization of the approach to moving meshes. The presentation will include these coupled analysis as well as an update on status of the FENIX framework.

70 - PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cluster Dynamics Modeling Needs for the Advanced Materials and Manufacturing Technologies Program

This milestone report aims to identify and assess the cluster dynamics (CD) modeling requirements within the Department of Energy's Office of Nuclear Energy (DOE-NE) Advanced Materials and Manufacturing Technologies (AMMT) program and to communicate these needs to the DOE-NE Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. The goal is to ensure NEAMS is well-informed about the CD modeling requirements to support AMMT's mission of accelerating the development, qualification, demonstration, and deployment of advanced structural materials and manufacturing for nuclear energy applications. CD modeling is an essential tool for predicting the degradation of structural materials under irradiation, which is a key component of AMMT's accelerated qualification process. The AMMT program focuses on both additively manufactured and wrought structural alloys, such as laser powder-bed fusion 316H austenitic stainless steel, alloy 709, Haynes 244, and alloy 617. These materials require a generalized CD modeling framework to facilitate rapid model development and computational simulation. A flexible, generalized CD software, similar to the Multiphysics Object-Oriented Simulation Environment (MOOSE) finite element framework, would enable modeling of various cluster types, including defect clusters, defect-solute clusters, and multicomponent clusters, incorporating thermodynamics and kinetics parameters. Radiation effects, microstructural feature evolution, and multi-dimensional modeling are critical considerations for the CD model. The usability of the CD code should allow for easy modification and coupling with MOOSE-based simulations. Additionally, the software should adhere to Nuclear Quality Assurance-1 standards, include a testing suite for verification and validation, and be version-controlled within a national laboratory-managed Git repository. Benchmark problems are needed to assess code predictions and performance.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Surrogate Neural Architecture Codesign Package (SNAC-Pack)

Neural architecture search (NAS) is a powerful approach for automating model design, but existing methods often optimize for accuracy alone or rely on proxy metrics such as bit operations (BOPs) that correlate poorly with hardware cost. This gap is particularly large for FPGA deployment, where cost is dominated by a multi-dimensional budget of lookup tables, DSPs, flip-flops, BRAM, and latency. We present the Surrogate Neural Architecture Codesign Package (SNAC-Pack), an open-source AutoML framework for hardware-aware neural architecture codesign and end-to-end FPGA deployment. SNAC-Pack runs a multi-objective global search with Optuna and NSGA-II, loading trials to a shared SQLite store that enables parallel workers across compute nodes. A hardware surrogate model outputs per-trial resource and latency estimates, avoiding the synthesis cost that would otherwise dominate the search loop. A local search stage then applies quantization-aware training (QAT) together with iterative magnitude pruning in a combined compression loop, after which the final model is synthesized to FPGA firmware via the hls4ml Python library. A YAML configuration and an optional agentic frontend let users run the pipeline on new datasets without modifying the framework. We demonstrate SNAC-Pack on jet classification at the Large Hadron Collider and superconducting qubit readout, discovering compact architectures that match or exceed strong baselines on the task metric while reducing FPGA resource utilization and, in the qubit readout case, reducing the design space exploration process from months of manual fine-tuning to hours of automated search.

Weitz, Jason [UC, San Diego]↗

Multi-Split Variable Refrigerant Flow (VRF) System Building Energy Simulations Using Performance Maps

Multi-split variable refrigerant flow (VRF) systems are highly energy-efficient HVAC (heating, ventilation and air conditioning) technologies that connect a single outdoor unit to multiple independent indoor terminal units using a common refrigerant circuit and a variable-speed compressor. Building energy simulations that incorporate VRF systems help model their unique operational characteristics and predict energy consumption in specific building designs. Traditionally, EnergyPlus models these systems by employing multiple sets of performance curves to characterize both individual terminal units and the outdoor unit. However, producing these curves is labor intensive and error prone, and they often do not capture all the key input and output variables. This paper introduces a novel approach that uses multi-dimensional performance maps to model VRF systems in building environments for space cooling. In this approach, performance maps are developed at the component level—separately for the outdoor unit and for each indoor terminal. The new modeling method is validated within EnergyPlus via a Python plug-in that contains a simple solver loop to coordinate the component-level, indoor, and outdoor unit maps. Furthermore, because performance maps can span more variables than traditional performance curves, they offer the opportunity to implement advanced controls, such as enhanced dehumidification and compressor modulation. A VRF air conditioner’s hardware system was modeled using the DOE/ORNL Heat Pump Design Model, which was automated to produce extensive performance maps for both the indoor and outdoor units.

Shen, Bo [ORNL] (ORCID:0000000336600393)↗

3D mesh regularization within an ALE code using a weighted line sweeping method

The Lagrangian formalism is widely used to simulate hydrodynamic responses in complex engineering applications, particularly those involving strong shock waves. However, as the mesh moves with the fluid, it can become highly distorted, requiring a regularization step. This involves constructing a new grid and remapping conservative quantities onto it to restore mesh quality. This work introduces a regularization method for block-structured meshes within a 3D ALE (Arbitrary Lagrangian-Eulerian) code. The proposed approach prevents mesh tangling while preserving the anisotropic features of the initial Lagrangian mesh. This regularization technique incorporates aspect ratio-based weights to control mesh smoothing. Unlike uniform rezoning techniques, this weighted approach maintains proximity to the Lagrangian mesh while improving mesh quality. Here, the method effectively handles concave geometries by mitigating the grid attraction phenomenon, which typically leads to mesh concentration along concave edges. Numerical experiments demonstrate its efficiency in regularizing severely deformed meshes, and its integration within the ALE framework is validated on challenging hydrodynamic test cases, including the triple point problem.

42 ENGINEERING↗

A conceptual framework for residential energy security in the context of clean energy transitions

Energy security is a crucial aspect of human well-being. As climate change impacts become more evident, countries are constructing equitable, resilient, and sustainable clean energy transition policies to reduce emissions while ensuring energy security. Climate policies globally highlight the importance of national energy security. Furthermore, adequate and affordable access to household energy is also critical to the continued prioritization of climate mitigation. However, past energy security discussions within the broader climate research and policymaking community primarily focused on national-level energy supply as a critical metric of energy security. Less research has explored the potential implications of energy transitions for residential energy security, often focusing on a single dimension of residential energy security. Thus, we conduct a review of journal articles and governmental plans to develop a conceptual framework of residential energy security and facilitate communication among researchers and policymakers. The framework is designed around four foundational pillars, five metrics measuring residential energy security, and seven drivers influencing the metrics. Additionally, we provide policy examples to show how this framework can be applied to inform decision-making. Thus, this paper makes important contributions to the literature by (a) creating a framework to better understand the concept of energy security at the household level for future research and policy-relevant communications, (b) identifying gaps in the current literature, and (c) highlighting instances where aspects of residential energy security are discussed in policies and governmental plans, which help serve as guiding examples for future applications of our framework in the policymaking processes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A cell-centered AMR-ALE framework for 3D multi-material hydrodynamics. Part II: linesweep ALE rezoning for nonconformal block-structured AMR meshes

The simulation of flows presenting contact discontinuities, vorticity, and large variations in spatial scales can be performed in a framework coupling Arbitrary Lagrangian Eulerian (ALE) algorithms and Adaptive Mesh Refinement (AMR). This coupling requires adaptation of ALE rezoning techniques to meshes containing nonconformal nodes arising from both the AMR topology and the junction of mesh blocks. Here, in this paper, we present an ALE rezoning strategy that is compatible with such meshes, and that can also act as a disentangling algorithm. Emphasis is put on an algorithm that respects intrinsic Lagrangian mesh properties in order to preserve accuracy around discontinuities. To that end, we adapt the weighted linesweep algorithm to nonconformal block-structured AMR meshes. Then, we present control parameters introduced in the method for it to be applicable in practical situations. Notably, the method is coupled to a specific metric optimization in order to palliate some shortcomings of the linesweep method. Finally, numerical test cases are presented that feature the capabilities of the ALE-AMR algorithm for flows that present discontinuities, vorticity, and a variety of scales. Notably, we show that our ALE-AMR algorithm gives results at least similar to Euler-AMR, but provides better accuracy in cases where discontinuities are involved, thanks to a method that respects the Lagrangian features of the mesh. Additionally, it enables Euler-AMR-like computations on domains with temporally varying domain boundaries.

Adaptive mesh refinement↗

New Mobility Technology Assessment - Benefits, Risks, and Safety

The age of vehicle automation is upon us. The fundamental perception and control technology is maturing as we speak (and write) with robo-taxis proliferating in select US cities. The news cycle is no longer filled with technological skepticism, but rather societal commentary on our collective response and use of the technology. This maturing of the technology is also accompanied by a renaissance in new types of urban movement technology to more effectively link people with goods, services, and employment, particularly in dense development areas where vehicle congestion (even automated vehicles) prevents high quality mobility. The National Renewable Energy Laboratory, through the DOE Clean Energy to Communities (C2C) program has worked with two jurisdictions to assess the benefits, risks, and safety concerns for a new product offering based on suspended cable technology which is fully automated and proposes an aerial network of self-propelled gondolas. The recognized need, independent of the technology, is to fairly assess the benefits of the proposed transportation system, assess its technical maturity, as well as risks and safety concerns. Using this new technology as an example, a technology represented by Swyft Cities, NREL developed a succession of mini-studies that characterized the technical maturity level, assessed the proposed benefits for Greenville, SC, examined the risks involved in moving forward with an emerging mobility technology, and determined the governing safety protocols and standards that are applicable to the space. These mini-case studies, though centered on Swyft Cities aerial automated gondola technology, are highly transferable to any type of new mobility technology and lays out a repeatable process for assessing new technology within an city or community context.

33 ADVANCED PROPULSION SYSTEMS↗