Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multiphysics problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Sodium-Cooled Fast Reactor Reference Plant Model

This report details the progress of Idaho National Laboratory (INL) in creating a reference plant multiphysics model for the Advanced Burner Test Reactor (ABTR). This model was developed under Task 13 of the U.S. Nuclear Regulatory Commission project “Development and Modeling Support for Advanced Non-Light Water Reactors,” and is an extension of the reference plant model developed in Task 4b, which was improved upon in the following ways. (1) The discrete ordinates method was used in lieu of the super-homogenization (SPH)-corrected diffusion approximation in order to better capture the anisotropic scattering contribution and the neutron leakage change due to thermal expansion. (2) The novel neutronic spatial discretization approach, termed the ring-heterogeneous (RH) approximation, was conceptualized and introduced to capture the differential expansion of the materials in the core. This new technique proved capable of preserving fission rates and maintaining the eigenvalue within 2.5% and 266 pcm with 9 neutron energy groups, respectively. Separating the different materials in the core enables the differential expansion of materials to be explicitly accounted for, eliminating the need for problem-specific cross-section functionalization techniques. (3) The SAM model for the core and system thermal-hydraulics analysis was updated to include 61 channels instead of just four representative ones. This enables users to obtain improved spatial resolution for sodium temperature and density scalar fields. (4) All the mesh files were created via the Multiphysics Object-Oriented Simulation Environment (MOOSE) Reactor module, eliminating all reliance on external tools for mesh creation. (5) Finally, the fuel axial expansion now leverages the HT9 and UPuZr material properties that have been validated against experimental data. The reference plant model was used to perform a full-core unprotected loss of flow (ULOF) transient calculation, including neutronics, thermal and mechanical feedback mechanisms. Future work will be devoted to further enhancements of the model. Potential improvements to the model include the addition of the control rod driveline expansion feedback and the upgrading of the support plate model so as to explicitly include 3D effects. Additionally, a Nuclear Energy Advanced Modeling and Simulation funded parallel effort has completely automated the creation of the ring-heterogeneous (RH) mesh from the fully heterogeneous (FH) geometry, thus maximizing user friendliness for the sodium fast reactor sodium-cooled fast reactor (SFR) workflow and will be incorporated in future work.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Isopod (inverse Optimization And Design): Moose-based Application For Performing Inverse Optimization On Multiphysics Modeling And Simulation

ISOPOD (InverSe OPtimizatiOn and Design) will be a MOOSE (Multiphysics Object Oriented Simulation Environment)-based framework which will iteratively estimate the parameters by minimizing the difference between simulated and experimental observables. While inverse optimization has long been used for parameter estimation, the unique feature of ISOPOD is rapid solution of new inverse problems, leading to accelerated Research, Development and Demonstration (RD&D) for complex parameter estimation problems. This will be achieved by extending the software structure of MOOSE to inverse optimization, as well as building on the unique automatic differentiation feature of MOOSE.

Munday, LynnB↗

Improvement and Verification of Online Cross Section Generation Capability of Griffin for TRISO-fueled Reactors

Griffin, a MOOSE-based reactor multiphysics code jointly developed by Idaho National Laboratory and Argonne National Laboratory under the DOE Office of Nuclear Energy’s NEAMS program, has pursued the development of an online multigroup cross section generation capability for a few years to enable high-fidelity, problem-dependent neutronics analyses of advanced thermal reactors. Recent advancements in Griffin’s online multigroup cross section generation capability have significantly improved the accuracy, robustness, and efficiency of self-shielding calculations for both prismatic and pebble-bed TRISO-fueled reactor applications. Key developments include a unified fuel self-shielding method applicable to both TRISO and annular compact/spherical shell fuel zone geometries; an advanced Dancoff Category-based Equivalence Theory using a bell function for non-fuel resonance treatment, achieving more than an order-of-magnitude speedup compared to the Tone method; an on-the-fly multigroup equivalence approach to mitigate group condensation errors; and a streaming correction method for pebble-bed homogenization. A proof-of-concept demonstration of on-the-fly group condensation with consistent P0 transport correction was also achieved. The method reproduced direct fine-group solutions with excellent accuracy (eigenvalue errors within 10 pcm and pin-power differences within 0.5%), but due to performance limitations of the current fixed-source solver, improvements to solver efficiency will be addressed in future work. Verification tests were performed on graphite-moderated TRISO-fueled two-dimensional core benchmark problems representing gas-cooled microreactors, heat pipe-cooled microreactors, gas-cooled pebble-bed reactors, and fluoride salt-cooled high-temperature reactors. Across all cases, Griffin showed excellent agreement with Serpent2 continuous energy Monte Carlo solutions: eigenvalue errors within 200 pcm, pin-power root-mean-square errors within 2%, and control rod and drum worth errors less than 2%. It should be noted that, for the benchmark problem, cross section generation contributed less than 3% of the total simulation times. These results demonstrate that Griffin’s online cross section generation capability delivers accurate and efficient reactor physics solutions across a wide spectrum of TRISO-fueled advanced reactor designs. With further improvements to the fine-group fixed-source solver and planned extensions to depletion, transients, and coupled neutron–gamma transport, Griffin will be well-positioned to become a powerful and comprehensive tool for advanced reactor analysis.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Verification and Validation Approach for COMSOL Multiphysics to Support High Flux Isotope Reactor (HFIR)

Over the last several decades, many reactors have successfully been converted from high enriched uranium (HEU) to low enriched uranium (LEU) fuels in United States in support of its global non-proliferation objectives. Of the reactors slated for conversion, five high-performance research reactors (HPRRs) remain. The high-flux isotope reactor (HFIR) at Oak Ridge National Laboratory (ORNL) is one of the five. Conversion of HFIR requires the qualification of a new fuel. To aid in the conversion process as well as improve safety margins, COMSOL Multiphysics was chosen to support and eventually supplement the steady-state heat-transfer code (SSHTC). In order to use COMSOL as a supplementary tool, i.e. one used for safety basis calculations, the code needs to undergo a verification and validation process. Verification and validation are important processes for the use of any software; however, physics-based solvers have a unique challenge, in that the validation is much more rigorous and its domain is only applicable to the general scope of the problem. This document details the verification and validation of COMOSL for analysis of HFIR. This report is intended for two different users: (1) current and future users of COMSOL for HFIR and (2) for individuals interested in assessing the scope of the validation of COMSOL for HFIR. This report is divided into six sections. The first of which details the process of verification and validation. Section one provides an overview of key concepts from ASME V&V 10, 20, and 40 and how these concepts are used to provide a validation of any multiphysics software. Section two covers the approach needed in order to validate multiphysics software for a given HFIR analysis. Parts three through five split up the key concepts highlighted in section two. The final section provides concluding remarks which demonstrate the scope and limitations of the validation study and how these may be expanded and improved.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A layered 2D computational framework: Theory and applications to nuclear fuel behavior

Nuclear fuel performance computer codes have been developed over the last 50 years to analyze fuel behavior under various operating conditions. Traditionally, these codes used quasi-two-dimensional (also commonly known as 1.5D) representations of the fuel rod, which model the rod using a set of one-dimensional axisymmetric models that represent the behavior at specific axial positions on the rod. Modern fuel performance codes have the ability to investigate full three-dimensional (3D) effects and couple to other physics-based codes for true multiphysics simulations. However, with increasing complexity comes increasing computational costs. Many phenomena of interest involve azimuthally-varying behavior that cannot be represented using the aforementioned quasi-two-dimensional approach, but do not require the use of a full 3D model. To efficiently address these problems, there is a need for a computational framework that provides a compromise between the quasi-two-dimensional and full 3D models. In this paper, we present a new quasi-three-dimensional approach that represents the fuel as a set of 2D planar models that represent the behavior of the fuel cross-section at various axial positions. Presented here are the theory behind the methodology, test cases to illustrate proper implementation, and practical applications of its use in the BISON fuel performance code for a variety of cases in nuclear fuel analysis, such as fuel fracture, axial fuel relocation, and cladding distension and oxidation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Improvements to the New CTH Code Verification & Validation Test Suite (FY2020)

The CTH multiphysics hydrocode, which is used for a wide range of important calculations, has undertaken in recent years to overhaul its software quality and testing processes. A key part of this effort entailed building a new, robust V&V test suite made up of traditional hydrocode verification problems, such as those listed in the ASC Tri-Lab Test Suite and the Enhanced Tri-Lab Test Suite, as well as validation problems for some of CTHs most frequently used equations of state, materials models, and other key capabilities. Substantial progress towards this goal was made in FY19. In FY20, this test suite has been expanded to include verification and validation tests of the Sesame and JWL equation of state models as well as the Mader verification problem from the Tri-Lab Test Suite and the Blake verification problem - a linear elastic analog to the Hunter problem from the Enhanced Tri-Lab Test Suite. This report documents CTH performance on the new test suite problems. Verification test results are compared to analytic solutions and, for most tests, convergence results are presented. Validation test results are compared to experimental data and mesh refinement studies are included. CTH performs well overall on the new test problems. Convergence rates for the Blake and Mader problems are comparable to those for similar ASC codes. The JWL and Sesame verification tests show good agreement with analytic solutions. Likewise, CTH simulation results show good agreement with experimental validation data for the Sesame and JWL equations of state for the materials tested. Future V&V work will focus on adding tests for other key capabilities like fracture and high explosive models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Block-Structured Operator Inference for Coupled Multiphysics Model Reduction

This work presents a block-structured formulation of Operator Inference as a way to learn structured reduced-order models for multiphysics systems. The approach specifies the governing equation structure for each physics component and the structure of the coupling terms. Once the multiphysics structure is specified, the reduced-order model is learned from snapshot data following the nonintrusive Operator Inference methodology. In addition to preserving physical system structure, which in turn permits preservation of system properties such as stability and second-order structure, the block-structured approach has the advantages of reducing the overall dimensionality of the learning problem and admitting tailored regularization for each physics component. The numerical advantages of the block-structured formulation over a monolithic Operator Inference formulation are demonstrated for aeroelastic analysis, which couples aerodynamic and structural models. For the benchmark test case of the AGARD 445.6 wing, block-structured Operator Inference provides an average 20% online prediction speedup over monolithic Operator Inference across subsonic and supersonic flow conditions in both the stable and fluttering parameter regimes while preserving the accuracy achieved with monolithic Operator Inference.

42 ENGINEERING↗

Demonstration of a new unstructured mesh IMC x-ray transport capability in LAP codes

In this document, the Advanced Simulation and Computing (ASC) Transport Project’s Jayenne team presents evidence that the Los Alamos National Laboratory (LANL) Level 2 milestone statement, Demonstrate a new unstructured mesh IMC x-ray transport capability in LAP codes, due Q4 FY20, has been satisfied with the release and integration of the Jayenne team’s Implicit Monte Carlo (IMC) solver libraries into the lumos multiphysics solver. The Jayenne project’s software includes the algorithms and features prescribed by the milestone description. The lumos software is maintained by the Lagrangian Applications Project (LAP) along with the hydrodynamics code flag and operates under the same ASC program as Jayenne. A set of demonstration problems has been specified, executed, and analyzed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Natural equilibria in steady-state neutron diffusion with temperature feedback

The critical diffusion equation with feedback is investigated within the context of steady-state multiphysics. It is proposed that for critical configurations there is no need to include the multiplication factor k in the formulation of the diffusion equation. This is notable because exclusion of k from the coupled system of equations precludes the mathematically tenuous notion of a nonlinear eigenvalue problem. On the other hand, it is shown that if the factor k is retained in the diffusion equation, as is currently common practice, then the resulting problem is equivalent to the constrained minimization of a functional representing the critical equilibrium of neutron and temperature distributions. The unconstrained solution corresponding to k = 1 represents the natural equilibrium of a critical system at steady-state. Computational methods for solving the constrained problem (with k) are briefly reviewed from the literature and a method for the unconstrained problem (without k) is outlined. A numerical example is studied to examine the effects of the constraint in the nonlinear system. (authors)

97 MATHEMATICS AND COMPUTING↗

Uncertainty Quantification and Sensitivity Analysis for Coupled VERA-CS and FRAPCON

The current nuclear power plant fleet in the U.S. is facing numerous challenges economically ranging from low natural gas price to the rapidly growing renewable energy sources such as wind and solar power. In order for the nuclear industry to keep the viability of its operating fleet, new innovations have to be introduced to lower the costs to operate the fleet. One area that could contribute to the cost reduction is to lower the fuel cycle cost and improve the plant safety through initiatives such as higher burnup fuel and accident tolerant fuel. At the same time, the nuclear industry has to address future challenges on the horizon such as load following and other flexible operating strategies as well as those associated with new regulations such as 10 CFR 50.69 and 10 CFR50.46c etc. All these require coupled analysis of core neutronics, thermal hydraulics and fuel performance, which necessitates the development of a multi-physics toolkit. Since different models, assumptions, and fidelities have gone into various computer codes, how to consistently propagate uncertainties in a multi-physics environment warrants careful evaluation. The U.S. DOE's Light Water Reactor Sustainability (LWRS) Program initiated a project to develop analytical capabilities to support the industry to address these challenges. The general idea behind the initiative was the development of an integrated multiphysics evaluation model. This integrated evaluation model is called LOTUS which stands for LOCA Toolkit for the U.S. Light Water Reactors. The focus of LOTUS is to establish the automation of the interface between the five disciplines. LOTUS framework ensures that uncertainties can be easily propagated to solve the problems forward and backward (inverse) with large numbers of simulations. The objective of this work is to perform uncertainty quantification (UQ) and sensitivity analysis (SA) on a coupling of CASL's Virtual Environment for Reactor Applications-Core Simulator (VERA-CS) and NRC's fuel performance code FRAPCON. The work presented herein is a subset of the overall LOTUS framework. The figures of merit (FOM) selected for analysis are minimum departure from nucleate boiling ratio (MDNBR), maximum fuel centerline temperature (MFCT), and the gap conductance at peak power (GCPP). All FOM are obtained at the end of the of a depletion case for a half cycle lasting 263 days. The minimum is taken over all spatial location for each pin at the end of the half cycle. This value is calculated in VERACS alone and has been analyzed in previous work by Brown and Zhang. The MFCT is available in both VERA-CS and FRAPCON, but is calculated via different methods (see Model Inconsistencies section for more details). For this work, only the FRAPCON values are reported due to the code's maturity from extensive validation in fuel performance. Previous work includes SA on a standalone nuclear fuel performance code VTT-modified FRAPCON- 3.4 by Ikonen. The GCPP is the gap conductance at the location corresponding to maximum power in the fuel rod. This value is available in FRAPCON alone and highlights the capability of LOTUS to obtain unique fuel performance metrics for each pin in a core simulation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NEAMS Technical Area Support in MOOSE

The MOOSE framework is a foundational capability used by the NEAMS program to create over 15 different simulation tools for advanced nuclear reactors. Due to this ubiquity, improvements to the framework in support of modeling and simulation goals are critical to the program. These improvements can take many forms including optimization, improved user experience, streamlined application programming interfaces (APIs), parallelism, and other new capabilities. The work transcribed in this report was conducted in direct support of the simulation tools and has already been deployed. The capabilities outlined in this report include enabling selective polynomial basis refinement, implementing a custom convergence system, building a scalable preconditioner for saddle-point problems, and much more.

97 MATHEMATICS AND COMPUTING↗

Composing preconditioners for multiphysics PDE systems with applications to Generalized MHD

New patch smoothers or relaxation techniques are developed for solving linear matrix equations coming from systems of discretized partial differential equations (PDEs). One key linear solver challenge for many PDE systems arises when the resulting discretization matrix has a near null space that has a large dimension, which can occur in generalized magnetohydrodynamic (GMHD) systems. Patch-based relaxation is highly effective for problems when the null space can be spanned by a basis of locally supported vectors. The patch-based relaxation methods that we develop can be used either within an algebraic multigrid (AMG) hierarchy or as stand-alone preconditioners. These patch-based relaxation techniques are a form of well-known overlapping Schwarz methods where the computational domain is covered with a series of overlapping sub-domains (or patches). Patch relaxation then corresponds to solving a set of independent linear systems associated with each patch. In the context of GMHD, we also reformulate the underlying discrete representation used to generate a suitable set of matrix equations. In general, deriving a discretization that accurately approximates the curl operator and the Hall term while also producing linear systems with physically meaningful near null space properties can be challenging. Unfortunately, many natural discretization choices lead to a near null space that includes non-physical oscillatory modes and where it is not possible to span the near null space with a minimal set of locally supported basis vectors. Further discretization research is needed to understand the resulting trade-offs between accuracy, stability, and ease in solving the associated linear systems.

97 MATHEMATICS AND COMPUTING↗

Interface Problem Formulation Improvements with Application to Nuclear Fuel Performance Analysis

The U.S. Department of Energy’s Nuclear Energy Advanced Modeling and Simulation Program aims to develop predictive capabilities by applying computational methods to the analysis and design of advanced reactor and fuel cycle systems. This program has been providing engineering scale support for the development of BISON, a high-fidelity and high-resolution fuel performance tool. This report documents new developments and robustness improvements in mechanical and thermal (gap heat transfer) contact formulations. The improvements range from the migration of industrial level (“assessment”) nuclear fuel model setups to the usage of mortar formulations, the addition of frictional contact to one-dimensional layered representations of fuel and cladding components, and the addition of the Petrov-Galerkin approach to dual mortar, which improves performance on curved, relatively coarse meshes. In addition, the Lagrange-multiplier enforcement of mechanical mortar contact constraints has been extended to two additional types of enforcement: penalty and augmented Lagrange-Uzawa. We show that the latter approach yields the same interface results as dual mortar in the Multiphysics Object-Oriented Simulation Environment, with the advantage of not worsening the condition number of the system matrix—thereby enabling the use of some general implementations of iterative preconditioners, at the expense of additional system evaluations (i.e., augmentations).

42 ENGINEERING↗

Demonstration of NEAMS Multiphysics Tools for Fast Reactor Applications

The SHARP toolkit is a high-fidelity reactor simulation tool developed under the U.S. Department of Energy, Office of Nuclear Energy Advanced Modeling and Simulation (NEAMS) Campaign. SHARP toolkit is comprised of the neutronics module PROTEUS thermal hydraulics module Nek5000, and structural mechanics module Diablo. During FY17 and FY18, the PROTEUS and Nek5000 components of SHARP were applied to solve challenging sodium-cooled fast reactor (SFR) problems. In particular, selected hot channel factors (HCF) for a prototype metal-fueled SFR design (the AFR-100) were analyzed in high fidelity, and the “SHARP zooming capability” for SFRs was developed and demonstrated to reduce computational expense for full core problems in cases where detailed data is needed in selected fuel assemblies. After the previous success applying SHARP to challenging SFR problems, the focus in FY19 and FY20 expanded to additional fast reactor applications including lead cooled fast reactors (LFR) and sodium cooled fast reactors (SFR). The specific technical tasks were (1) assessment of hot channel factors for LFR, for which no data currently exists, and (2) demonstration of zooming capability in assemblies of the Versatile Test Reactor (VTR). First-of-a-kind hot channel factor (HCF) estimation for LFR with high fidelity codes (PROTEUS/Nek5000) was successfully demonstrated in this study which began in FY19 and continued in FY20. Selected HCF were computed and compared with SFR data (AFR-100, EBR-II). The findings confirm that different reactor types, design parameters and uncertainties lead to different HCFs. Careful estimation of HCF for a specific design is necessary to obtain appropriate HCFs. In addition to improvement in HCF accuracy, high fidelity tools generate data to help the designer better understand the mechanism of the impact from these uncertainties. For example, the impact of cladding thickness manufacturing tolerance resulted in non-intuitive effects in the corner pins of the LFR assembly. This procedure of computing HCF using high fidelity models shows promise and flexibility for being repeated for any arbitrary reactor of choice. Along with the application on SFR and LFR, the capability of the tools has also been matured to deal with different reactor types and designs. Progress was made towards extending the previously demonstrated SHARP zooming capability to non-fueled SFR assemblies. In particular, in FY19 a gamma transport capability was implemented in both high fidelity PROTEUS solvers in order to accurately account for heat deposition caused by gamma particles, which accounts for ~10% of total core power. Neutronics verification cases were carried out for a candidate Versatile Test Reactor (VTR) design using the new gamma transport capability in PROTEUS. Comparisons were made with continuous energy MCNP calculations and shown to agree well. The models for the full core design with heterogeneous control and fuel assemblies is in progress for PROTEUS-SN and completed with MCNP. The MCNP power distributions were transferred to Nek5000 to perform thermal hydraulic calculations of the control and fuel assembly.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

VUSAT - A VERA-CS Uncertainty and Sensitivity Analysis Toolkit

VERA-CS (the Virtual Environment for Reactor Applications, Core Simulator) is a high-fidelity multiphysics core simulator under development by the Consortium for Advanced Simulation of Light Water Reactors (CASL). VERA-CS includes three main components: MPACT for reactor physics and neutron transport, COBRA-TF for thermal-hydraulics, and ORIGEN for isotopic depletion. VERA-CS has been applied to an array of problems including core physics analysis, and the modeling for all of the fuel cycles of Watts Bar Nuclear Unit 1 (WBN1). MPACT is a 3D pin-resolved reactor transport code developed by Oak Ridge National Laboratory (ORNL) and the University of Michigan. COBRA-TF (CTF) is a three-field two-phase flow subchannel analysis code developed by ORNL and North Carolina State University. CTF solves the mass, momentum, and energy equations for the liquid, vapor, and droplet phases for each subchannel in the core and captures the axial flow within each channel as well as cross-flow between channels. Direct coupling between neutronics (MPACT) and thermal-hydraulics (CTF) in VERA-CS provides temperature and density feedback. CTF includes a number of models important for LWR safety and design analysis including flow regime dependent two-phase wall heat transfer, inter-phase heat transfer and drag, droplet breakup, and quench-front tracking. ORIGEN is developed by ORNL and released through the SCALE package. ORIGEN is directly integrated in MPACT through its API to calculate the changes in nuclides for every depletable cross-section region. Uncertainties exist in safety calculations with computer codes for nuclear reactor modeling and simulation, and they come from code limitations, scaling inaccuracies embedded in the experimental data, and uncertainties associated with the state of the reactor at the initiation of the transient. Consequently, for applications of high fidelity calculations using VERA-CS, proper uncertainty quantification (UQ) and sensitivity analysis (SA) of the computing models of reactor neutronics and thermal-hydraulics are important to comprehensively understand the results. New methods in UQ and SA have to be developed in multi-physics calculations using VERA-CS. Toward this end, a software package called VUSAT which stands for VERA-CS Uncertainty and Sensitivity Analysis Toolkit has been developed to facilitate the applications of VERA-CS within the context of best estimate plus uncertainty (BEPU) analysis framework. In this work, the VUSAT application to analyze departure from nucleate boiling (DNB) is presented.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

FLEXO: A Portably Performant Code for Pulsed Power Target Physics

FLEXO (Flux-Limited Extended-MHD Ohm's Law) is a production-line multiphysics code developed at Sandia to enable more predictive modeling of target physics on pulsed-power devices. FLEXO uses an extended magnetohydrodynamics (XMHD) model which includes a generalized Ohm's law (GOL), an electron inertia term, and Hall physics. This report describes the code's numerical methods, its computational performance, and test problems of interest.

42 ENGINEERING↗

A Full-Induction Magnetohydrodynamics Solver for Liquid Metal Fusion Blankets in Vertex-CFD

Multiphysics modeling of liquid metal fusion blankets, which produce tritium and convert energy of neutrons created via fusion reactions into heat, is crucial for predicting performance, ensuring structural integrity, and optimizing energy production. While traditional blanket modeling of liquid metal flows during normal steady operating conditions commonly employs the inductionless approximation of the magnetohydrodynamics (MHD) equations, transient scenarios, when the plasma-confining magnetic field varies on millisecond time scales, require a full-induction MHD approach that dynamically evolves the magnetic field via the time-dependent induction equation. This paper presents the formulation, implementation, and initial verification of a full-induction MHD solver integrated within the open-source Vertex-CFD framework, which aims to achieve tight multiphysics coupling, a flexible software design enabling easy extension and addition of physics models, and performance portability across computing platforms. The solver utilizes finite element spatial discretization, implicit Runge–Kutta time integration, and an inexact Newton method to solve the resulting discrete nonlinear system, leveraging Trilinos packages for efficient computation. Verification against selected benchmark problems demonstrates accuracy and robustness of the solver. Furthermore, when the solver is applied to an idealized blanket model in 2.5D and full 3D, results obtained with Vertex-CFD are in good agreement with recently published quasi-2D simulations. These findings establish a computational foundation for future simulations of transient MHD phenomena in liquid metal blankets with Vertex-CFD, and open avenues for future extensions and performance optimizations.

Endeve, Eirik [ORNL] (ORCID:0000000312519507)↗