Search NASA⌕ Search

SEARCH · Search NASA

Results for “Navier Stokes simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Multidimensional Numerical Modeling of Combustion Dynamics in a Non-Premixed Rotating Detonation Engine With Adaptive Mesh Refinement

In the present work, a novel computational fluid dynamics (CFD) methodology was developed to simulate full-scale non-premixed rotating detonation engines (RDEs). A unique feature of the modeling approach was the incorporation of adaptive mesh refinement (AMR) to achieve a good trade-off between model accuracy and computational expense. Here, unsteady Reynolds-averaged Navier–Stokes (RANS) simulations were performed for an Air Force Research Laboratory (AFRL) non-premixed RDE configuration with hydrogen as fuel and air as the oxidizer. The finite-rate chemistry model, along with a ten-species detailed kinetic mechanism, was employed to describe the H 2 -Air combustion chemistry. Three distinct operating conditions were simulated, corresponding to the same global equivalence ratio of unity but different fuel/air mass flowrates. For all conditions, the capability of the model to capture essential detonation wave dynamics was assessed. An exhaustive verification and validation study was performed against experimental data in terms of a number of waves, wave frequency, wave height, reactant fill height, oblique shock angle, axial pressure distribution in the channel, and fuel/air plenum pressure. The CFD model was demonstrated to accurately predict the sensitivity of these wave characteristics to the operating conditions, both qualitatively and quantitatively. A comprehensive heat release analysis was also conducted to quantify detonative versus deflagrative burning for the three simulated cases. The present CFD model offers a potential capability to perform rapid design space exploration and/or performance optimization studies for realistic full-scale RDE configurations.

42 ENGINEERING↗

Transonic Lift and Drag Predictions using Wall Modelled Large Eddy Simulations

Wall-modelled Large Eddy Simulations (WMLES) of the NASA Common Research Model (CRM) at transonic conditions and various angles of attacks leading up to and including shock-induced flow separation are performed using the LAVA computational framework. The simulations are shown to accurately predict the lift curve slope and the onset of separation characterized by the break in the pitching moment. Furthermore, careful assessment of skin-friction drag at cruise condition and its subsequent decrease with increasing angles of attack are shown to be in agreement with viscous sublayer resolving Reynolds Averaged Navier Stokes(RANS) simulations. The small differences between WMLES and RANS appear to be of the same order as differences seen between two RANS models at the cruise-point. Some sensitivity is observed to the coefficient used in the subgrid scale model, although this can be reconciled by noting the low chord- and shock-incidence Reynolds numbers (Rex≈106) seen in the outboard regions of the wing, along with the uncertainties associated with tripping and the numerical transition that occurs near the leading edge. Among the primary drawbacks seen in the WMLES predictions is the subdued increase in wave-drag with increasing angle-of-attack and the shock intensity when compared with experimental data. Preliminary assessment suggests that additional span- and stream-wise grid resolution is likely needed in mid- and out-board portions of the wing to better resolve the shock-induced separated flow and to further investigate prediction accuracy of unsteady temporal characteristics of the problem.

ARMD↗

Flow Simulation of N3-X Hybrid Wing-Body Configuration

System studies show that a N3-X hybrid wing-body aircraft with a turboelectric distributed propulsion system using a mail-slot inlet/nozzle nacelle can meet the environmental and performance goals for N+3 generation transports (three generations beyond the current air transport technology level) set by NASA s Subsonic Fixed Wing Project. In this study, a Navier-Stokes flow simulation of N3-X on hybrid unstructured meshes was conducted, including the mail-slot propulsor. The geometry of the mail-slot propulsor was generated by a CAD (Computer-Aided Design)-free shape parameterization. A body force approach was used for a more realistic and efficient simulation of the turning and loss effects of the fan blades and the inlet-fan interactions. Flow simulation results of the N3-X demonstrates the validity of the present approach.

Kim, Hyoungjin↗

High Fidelity Simulations of a Non-Premixed Rotating Detonation Engine

Over the last two decades, detonation based propulsion concepts have received a great deal of attention as a means to achieve significant improvement in the performance of air-breathing and rocket engines. Detonative combustion mode is particularly interesting due to the resulting pressure gain from reactants to products, faster heat release, decreased entropy generation, more available work and higher thrust compared to conventional deflagrative combustion. Rotating detonation engine (RDE) is one such class of novel combustor concepts. Realistic RDE configurations utilize separate fuel and air injection schemes, hence are not perfectly premixed. Moreover, the performance of RDEs is governed by a large number of design parameters and operating conditions. In this context, computational fluid dynamics (CFD) has the potential to enhance the understanding of RDE combustion and aid future development/optimization of this technology. In the present work, a CFD model was developed to simulate a representative non-premixed RDE combustor at the US Air Force Research Laboratory (AFRL). To resolve the reacting flow in the combustor, a finite-rate chemistry model was employed. In addition, adaptive mesh refinement (AMR) was incorporated to achieve a good trade-off between model accuracy and computational expense. Unsteady Reynolds-Averaged Navier-Stokes (RANS) simulations were performed for the full combustor (including the separate fuel and air injection ports) geometry, with hydrogen as fuel and air as the oxidizer. A 10-species detailed kinetic mechanism was employed to describe the H2-Air combustion chemistry. Two different operating conditions were simulated, corresponding to the same global equivalence ratio of unity but different fuel and air mass flow rates. For both conditions, the capability of the model to capture the essential detonation wave dynamics was assessed. A validation study was performed against a wide variety of experimental data available on detonation wave frequency/height, reactant fill height, oblique shock angle, axial pressure distribution in the channel, and fuel/air plenum pressure. The CFD model predicted the sensitivity of all these wave characteristics to the operating conditions with good accuracy, both qualitatively and quantitatively. The present CFD model offers a potential capability to perform rapid design space exploration and/or performance optimization studies for realistic full-scale RDE configurations.

Cocks, Peter A.↗

Viscous simulation method for unsteady flows past multicomponent configurations

The present algorithm for the numerical simulation of flows about complex configurations (whose multiple and nonsimilar components have arbitraty geometries) employs a hybridization of the domain decomposition techniques for grid generation as well as to reduce computer-memory requirements. A fully vectorized, finite-volume, upwind-biased, approximately factored multigrid method is used to solve 3D Reynolds-averaged unsteady and compressible Navier-Stokes equations simulating supersonic flows past an ogive-nose-cylinder near or within a cavity. The time-averaged surface pressures obtained compare favorably with the wind tunnel data.

Fouladi, Kamran↗

Machine learning from RANS and LES to inform coarse grid simulations

Nuclear system thermal hydraulic analysis has historically relied on computationally inexpensive 1D codes. However, such tools are unable to capture multiscale multidimensional effects in large nuclear reactor enclosures. On the other hand, simulations with higher fidelity can be too expensive for such purposes. One of the ways to reduce computational cost is to perform simulations on a coarse grid, which, unfortunately, introduces large discretization errors. In this paper, two high-to-low data-driven approaches are investigated: (1) a coarse grid turbulence model to predict eddy viscosity and (2) correction of errors in coarse grid velocity fields. The approaches aim to reduce grid- and turbulence model-induced errors in coarse grid Reynolds-averaged Navier–Stokes (RANS) simulations. Two sources of high-fidelity data, RANS and large eddy simulations (LES), are explored. To extract the eddy viscosity from the LES data, an inverse optimization problem is solved. However, the LES eddy viscosity is shown to be comparable to the RANS eddy viscosity in terms of error reduction. Therefore, the directly available RANS eddy viscosity was used to develop a coarse grid data-driven turbulence model. Additionally, error correction in velocity is used to reduce the remaining uncertainties and bring the results closer to reality. In conclusion, the performance of the frameworks is demonstrated for a scaled upper plenum of a gas-cooled reactor facility.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Large eddy simulation of atmospheric boundary layer flow over complex terrain in comparison with RANS simulation and on-site measurements under neutral stability condition

Large eddy simulation (LES) of the atmospheric boundary layer (ABL) flow over complex terrain is presented with a validation using meteorological tower (met-tower) data through an improved neutral stability sampling approach. The proposed stability sampling procedure includes a condition based on the most-likely occurrence time-periods of the neutral ABL and reduces the variabilities of the conditional wind statistics calculated at the met-towers in comparison to our previous work. The ABL flow simulations are carried out over a potential wind site with a prominent hill based using the OpenFOAM-based simulator for on/off-shore wind farm applications by applying the Lagrangian-averaged scale-invariant dynamic sub-grid scale turbulence model. A low-dissipative scale-selective discretization scheme for the non-linear convection term in the LES governing equation is adopted implicitly to ensure both the second-order accuracy and bounded solution. The LES inflow is generated through a precursor method with a “tiling” approach based on the flow driving parameters obtained from a corresponding Reynolds-averaged Navier–Stokes (RANS) simulation. Overall, the averaged wind velocity profiles predicted by the LES approach at all met-tower locations show a similar tendency as the RANS results, which are also in reasonable agreement with the met-tower data. An obvious difference in wind speed standard deviation profiles is seen between LES and RANS, especially at regions downstream of the hill edge, where the LES shows under-predicted results at the highest measurement levels in comparison to the tower data. The computational costs of the LES are found to be about 20 times higher than the RANS simulations.

Energy & Fuels↗

Comparison of continuum and particle simulations of expanding rarefied flows

Comparisons of Navier-Stokes solutions and particle simulations for a simple two-dimensional model problem at a succession of altitudes are performed in order to assess the importance of rarefaction effects on the base flow region. In addition, an attempt is made to include 'Burnett-type' extensions to the Navier-Stokes constitutive relations. The model geometry consists of a simple blunted wedge with a 0.425 meter nose radius, a 70 deg cone half angle, a 1.7 meter base length, and a rounded shoulder. The working gas is monatomic with a molecular weight and viscosity similar to air and was chosen to focus the study on the continuum and particle methodologies rather than the implementation of thermo-chemical modeling. Three cases are investigated, all at Mach 29, with densities corresponding to altitudes of 92 km, 99 km, and 105 km. At the lowest altitude, Navier-Stokes solutions agree well with particle simulations. At the higher altitudes, the Navier-Stokes equations become less accurate. In particular, the Navier-Stokes equations and particle method predict substantially different flow turning angle in the wake near the after body. Attempts to achieve steady continuum solutions including 'Burnett-type' terms failed. Further research is required to determine whether the boundary conditions, the equations themselves, or other unknown causes led to this failure.

Lumpkin, Forrest E., III↗

USM3D-ME Contributions to the 5th AIAA High Lift Prediction Workshop

This paper presents the results of Reynolds-averaged Navier-Stokes (RANS) simulations conducted by NASA’s flow solver, mixed-element USM3D (USM3D-ME), for the 5th AIAA High-Lift Prediction Workshop. As part of the Fixed-Grid RANS Technology Focus Group (TFG), these simulations were performed to assess the accuracy and efficiency of the USM3D-ME solutions in predicting high-lift flows. The High-Lift Common Research Model (CRM-HL) served as the primary geometry. Several CRM-HL configurations were used for three case studies: a verification study (Case 1), a configuration buildup study (Case 2), and a Reynolds-number variation study (Case 3). Overall, USM3D-ME RANS results aligned with the solutions selected by the Fixed-Grid RANS TFG and available wind tunnel data Simulations for Cases 1 and Configuration 2.1 achieved machine-zero residual convergence, with aerodynamic coefficients converging to steady-state values. However, Configurations 2.2-2.4 and Case 3 encountered iterative- and grid-convergence challenges, particularly at high angles of attack. Compared with the experimental data available for Configurations 2.2-2.4, close agreement was demonstrated at low angles of attack. However, for angles of attack approaching the maximum lift conditions, the predicted lift coefficient and pitching moment deviated from experimental values. The drag-coefficient predictions were in a relatively good agreement, however, slight overpredictions were observed at the highest angle of attack corresponding to the maximum-lift condition. Although iterative convergence for Configurations 2.2-2.4 at high angles of attack remains a persistent challenge, averaging aerodynamic coefficients over the last 5000 iterations yielded satisfactory agreement with the available wind tunnel experimental data. During the workshop, the lack of iterative convergence was attributed to the vortex structures emanating from the slat brackets. To investigate this issue further, post-workshop simulations were conducted on Configuration 2.2. In one study, RANS simulations were performed on a simplified geometry with the slat brackets removed. The second study focused on performing URANS simulations on the original Configuration 2.2 geometry. Preliminary results from both studies are presented and compared with wind tunnel data for Configuration 2.2. Consistent with the findings of other participants in the Fixed-Grid RANS TFG, this study emphasizes the necessity for further exploration and advancement in RANS technology for predicting high-lift flows.

CFD↗

USM3D-ME Contributions to the 5th AIAA High Lift Prediction Workshop

This paper presents the results of Reynolds-averaged Navier-Stokes (RANS) simulations conducted by the NASA flow solver, mixed-element USM3D (USM3D-ME), for the 5th AIAA High-Lift Prediction Workshop. As part of the Fixed-Grid RANS Technology Focus Group (TFG), these simulations were performed to assess the accuracy and efficiency of the USM3D-ME solutions in predicting high-lift flows. The High-Lift Common Research Model (CRM-HL) served as the primary geometry. Several CRM-HL configurations were used for three case studies: a verification study (Case 1), a configuration buildup study (Case 2), and a Reynolds-number variation study (Case 3). Overall, USM3D-ME RANS results aligned with the solutions selected by the Fixed-Grid RANS TFG and available wind tunnel data. Simulations for Case 1 and Configuration 2.1 achieved machine-zero residual convergence, with aerodynamic coefficients converging to steady-state values. However, Configurations 2.2-2.4 and Case 3 encountered iterative- and grid-convergence challenges, particularly at high angles of attack. Compared with the experimental data available for Configurations 2.2-2.4, close agreement was demonstrated at low angles of attack. However, for angles of attack approaching the maximum lift conditions, the predicted lift coefficient and pitching moment deviated from experimental values. The drag-coefficient predictions were in relatively good agreement, however, slight overpredictions were observed at the highest angle of attack corresponding to the maximum-lift condition. Although iterative convergence for Configurations 2.2-2.4 at high angles of attack remains a persistent challenge, averaging aerodynamic coefficients over the last 5000 iterations yielded satisfactory agreement with the available wind tunnel experimental data. During the workshop, the lack of iterative convergence was attributed to the vortex structures emanating from the slat brackets. To investigate this issue further, post-workshop simulations were conducted on Configuration 2.2. In one study, RANS simulations were performed on a simplified geometry with the slat brackets removed. The second study focused on performing unsteady RANS (URANS) simulations on the original Configuration 2.2 geometry. Preliminary results from both studies are presented and compared with wind tunnel data for Configuration 2.2. Consistent with the findings of other participants in the Fixed-Grid RANS TFG, this study emphasizes the necessity for further exploration and advancement in RANS technology for predicting high-lift flows.

Aerodynamics↗

Validation of Calibrated k–ε Model Parameters for Jet-in-Crossflow

Previous efforts determined a set of calibrated, optimal model parameter values for Reynolds-averaged Navier–Stokes (RANS) simulations of a compressible jet in crossflow (JIC) using a $k–ε$ turbulence model. These parameters were derived by comparing simulation results to particle image velocimetry (PIV) data of a complementary JIC experiment under a limited set of flow conditions. Here, a $k–ε$ model using both nominal and calibrated parameters is validated against PIV data acquired from a much wider variety of JIC cases, including a realistic flight vehicle. The results from the simulations using the calibrated model parameters showed considerable improvements over those using the nominal values, even for cases that were not used in the calibration procedure that defined the optimal parameters. This improvement is demonstrated using a number of quality metrics that test the spatial alignment of the jet core, the magnitudes of multiple flow variables, and the location and strengths of vortices in the counter-rotating vortex cores on the PIV planes. These results suggest that the calibrated parameters have applicability well outside the specific flow case used in defining them and that with the right model parameters, RANS solutions for the JIC can be improved significantly over those obtained from the nominal model.

42 ENGINEERING↗

Experimental and numerical investigations of a two-body floating-point absorber wave energy converter in regular waves

This paper presents experimental and numerical studies on the hydrodynamics of a two-body floating-point absorber (FPA) wave energy converter (WEC) under both extreme and operational wave conditions. In this study, the responses of the WEC in heave, surge, and pitch were evaluated for various regular wave conditions. For extreme condition analysis, we assume the FPA system has a survival mode that locks the power-take-off (PTO) mechanism in extreme waves, and the WEC moves as a single body in this scenario. A series of Reynolds-averaged Navier-Stokes (RANS) simulations was performed for the survival condition analysis, and the results were validated with the measurements from experimental wave tank tests. For the FPA system in operational conditions, both a boundary element method (BEM) and the RANS simulations were used to analyze the motion response and power absorption performance. Additional viscous damping, primarily induced by flow separation and vortex shedding, is included in the BEM simulation as a quadratic drag force proportional to the square of body velocity. The inclusion of viscous drag improves the accuracy of BEM's prediction of the heave response and the power absorption performance of the FPA system, which agrees well with experimental data and the RANS simulation results over a broad range of incident wave periods, except near resonance in large wave height scenarios. Overall, the experimental and numerical results suggest that nonlinear effects, caused by viscous damping and interaction between waves and the FPA, significantly influence the system response and power absorption performance. Nonlinear effects were found to be particularly significant when the wave height was large and the period was near or shorter than the resonant period of the FPA system. The study is expected to be helpful for understanding the nonlinear interaction between waves and the FPA system so that the structure of the FPA can be adequately designed.

16 TIDAL AND WAVE POWER↗

Using 3D Measurements from MRI to Improve VVUQ

Magnetic resonance velocimetry (MRV) is a diagnostic that can measure 3D, three-component turbulent velocity fields in arbitrarily complex flow configurations. The approach uses magnetic resonance imaging (MRI), which is a system commonly available in radiology departments or medical research centers. MRV acquires signal from hydrogen protons in water channel flows. Despite the obvious utility of the measurements for investigating a variety of flows, comparisons with computational fluid dynamic (CFD) simulations largely retain traditional metrics, comparing velocity profiles and planes at discrete regions within the flow rather than using the 3D nature of the measured field. In this effort, MRV was conducted in a simple water channel with six spanwise-centered periodic obstacles roughly shaped as cubes. At a fully turbulent Reynolds number of 15,000, the channel includes two flows: a main streamwise flow and, in the wake of the second obstacle, an injected flow oriented perpendicular to the streamwise flow. The flow geometry includes partial obstacles on the side walls and is inherently 3D because of the interaction of the two streams and the wake features, making the flow challenging to completely measure with traditional optical techniques. Aside from line profiles and planar comparisons, two 3D metrics are used to compare the data with a steady Reynolds-averaged Navier–Stokes (RANS) simulation result. A brief discussion about the comparison is provided, including comments about uncertainty.

Benson, Mike [ORNL] (ORCID:000000023210116X)↗

OPTIMIZATION OF A NUCLEAR VESSEL OUTLET FOR INCIDENT MONITORING

Classical nuclear core fluidic design techniques require improvement to better align with modern technological innovations. The US Department of Energy’s Office of Nuclear Energy (DOE-NE) Transformational Challenge Reactor (TCR) program is deploying additive manufacturing and advanced modeling and simulation to reimagine these designs. With the aid of modern computing power, computerized design optimization can be implemented to remove unwanted pressure drop while simultaneously optimizing flow structures, resulting in new opportunities to enable advanced instrumentation and monitoring capabilities.Previous development of geometric specifications for the TCR pressure vessel’s outlet plenum used design optimization to (1) limit pressure losses below 3.5 kPa (~0.5 psi) and (2) create a fluidic plane in which the temperature variation would not exceed ±5°C. This significant limit of the allowable pressure drop stems from the overarching goal of the TCR program to apply cutting edge techniques and unconventional thinking to demonstrate potential opportunities in additive manufacturing (AM).This paper expands the previous work by optimizing thermowell locations for robust measurements by explicitly modeling them and the resulting flow impacts. Additionally, a single core coolant channel was chosen to represent an event that causes an increased bulk flow temperature increase of 100°C.High fidelity unsteady Reynolds-averaged Navier-Stokes (URANS) simulations of the conjugate heat transfer problem were run in Siemen’s Star-CCM+ for this study. Next, the bulk flow temperature of a single coolant channel was increased by 100°C and was allowed to converge again. Finally, statistical analysis using a sequential probability ratio test (SPRT) was used to determine the elapsed time the thermocouples took to discover the increased bulk flow temperature.

See, Nate↗

Calibrating hypersonic turbulence flow models with the HIFiRE-1 experiment using data-driven machine-learned models.

In this paper we study the efficacy of combining machine-learning methods with projection-based model reduction techniques for creating data-driven surrogate models of computationally expensive, high-fidelity physics models. Such surrogate models are essential for many-query applications e.g., engineering design optimization and parameter estimation, where it is necessary to invoke the high-fidelity model sequentially, many times. Surrogate models are usually constructed for individual scalar quantities. However there are scenarios where a spatially varying field needs to be modeled as a function of the model’s input parameters. Here we develop a method to do so, using projections to represent spatial variability while a machine-learned model captures the dependence of the model’s response on the inputs. The method is demonstrated on modeling the heat flux and pressure on the surface of the HIFiRE-1 geometry in a Mach 7.16 turbulent flow. The surrogate model is then used to perform Bayesian estimation of freestream conditions and parameters of the SST (Shear Stress Transport) turbulence model embedded in the high-fidelity (Reynolds-Averaged Navier–Stokes) flow simulator, using shock-tunnel data. The paper provides the first-ever Bayesian calibration of a turbulence model for complex hypersonic turbulent flows. We find that the primary issues in estimating the SST model parameters are the limited information content of the heat flux and pressure measurements and the large model-form error encountered in a certain part of the flow.

42 ENGINEERING↗

On the effects of reactant stratification and wall curvature in non-premixed rotating detonation combustors

The optimization of non-premixed rotating detonation combustors (RDCs) requires improved understanding of the coupled effects of reactant stratification, fluid property gradients, and complex shock-wave interactions on the detonation wave structure within annular geometries. In the current work, simultaneous orthogonal views of chemiluminescence and hydroxyl planar laser-induced fluorescence (PLIF) are utilized to establish the existence of a dual-wave system characterized by leading and trailing detonation waves that are closely coupled by the local flow physics. These features are persistent over a wide range of mass flow rates and are consistent with prior observations of non-premixed rotating detonations in annular geometries. The detailed instantaneous time sequences are compared with a 3D reactive unsteady Reynolds averaged Navier-Stokes (URANS) simulation to more clearly elucidate the in-situ combustion dynamics and the sensitivity to reactant inlet conditions. It is found that the dual-wave system results from unburned reactants that survive the leading detonation wave in the injector near field and are consumed within a trailing azimuthal reflected-shock combustion (ARSC) zone. By contrast, the injector far field is characterized by rapid mixing due to a sudden drop to subsonic conditions, and the bifurcated detonation wave structure collapses into a stronger, single-wave detonation front with higher overall pressure ratio as compared with the dual-wave system. While each RDC will have different inflow, mixing, and combustion characteristics, the underlying interactions between the stratified reactants and azimuthal wave dynamics identified through the combination of advanced MHz-rate diagnostics and 3D numerical simulations have important implications for the study of detonation wave stability, mode transition, and combustion efficiency in non-premixed annular RDCs.

3D URANS↗

A passive model for the evolution of subgrid-scale instabilities in turbulent flow regimes

In this work, a zero-dimensional model for the development of turbulent mixing layers driven by Rayleigh–Taylor (RT) or Richtmyer–Meshkov (RM) instabilities is presented, for application in Reynolds-Averaged Navier–Stokes (RANS) simulations. The model approximates the behavior of the turbulent mixing layer at a passively advected tracer particle that sits on the material interface of interest in the simulation, and is used to provide initial conditions for the RANS model once the mixing layer width has developed to a size that may be resolved on the computational mesh. The model relies on approximations to the Besnard–Harlow–Rauenzahn (BHR) RANS closure equations and is thus consistent the turbulent development of the mixing layer, unlike previous models of this type which have focused on the early-time laminar development of RT or RM instabilities. These instabilities will often grow through an initially laminar state before developing into turbulence, and criteria for switching from an existing laminar model to the proposed turbulent model are considered. The proposed model reproduces the mixing layer development of RT and RM instabilities seen in mixed width resolving BHR RANS simulations to a reasonable degree of accuracy, and relaxes the need for the RANS simulation to resolve the mixed width as soon as the mixing layer becomes turbulent, which may be impractical in cases where the mixing layer grows through a wide range of scales.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development and assessment of models for turbulent Rayleigh-Taylor mixing using the macroscopic forcing method

Reynolds-Averaged Navier Stokes (RANS) simulations are a popular method for designing ICF experiments, and accurate mixing models are crucial for these simulations to give good predictions. To this end, the present work seeks to demonstrate the Macroscopic Forcing Method (MFM) as a tool for both improving existing RANS models as well as assessing RANS model forms. First, MFM analysis from Lavacot et al. (Phys. Rev. Fluids, 2025) is used to develop the k–L–F model, an extension of the k–L model of Dimonte and Tipton (Phys. Fluids, 2006) that incorporates nonlocality through addition of a turbulent species flux transport equation. MFM is then applied to the k–L–F model along with the k–L and BHR–4 models to assess their forms and compare the model-implied eddy diffusivity moments to those measured from high-fidelity simulations. Furthermore, the analysis reveals that models incorporating nonlocality (k–L–F and BHR–4) match the high-fidelity simulation data better than purely local models (k–L), both in terms of mean fields and eddy diffusivity moments. However, all of the considered RANS models struggle to match temporal moments at high Atwood numbers, highlighting the importance of temporal nonlocality in these regimes and the need for additional improvement even among models incorporating nonlocality.

general physics↗