Search NASA⌕ Search

SEARCH · Search NASA

Results for “Neutron Diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Neutron Characterization of 3D Printed Gas Turbine Alloy With Internal Cooling Structure

The objective of this research work is to investigate the residual strains induced by the presence of a exit hole and internal hollow geometry present in a 3D printed IN718 similar to that seen in a gas turbine blade. The specimens were manufactured with an internal hollow structure that ended with an exit hole, and fabricated by direct metal laser sintering additive manufacturing technique. Using this technique, metal powder was melted by a laser source and rapidly cooled to form the part layer by layer. Rapid heating and cooling generate large thermal gradients and residual stresses in the 3D printed material. To be aligned with industry standards, specimens were heat-treated to relieve most of the residual stresses as well as to investigate whether IN718 still preserved a nonhomogeneous stress state after the thermal treatment. Roughness and microstructure analysis was performed to understand the heat-treated sample properties. To investigate the volumetric residual strain, the neutron diffraction technique was used with a definite neutron wavelength. Bragg’s law was used to determine lattice spacing. Interplanar lattice spacing and stress-free state lattice spacings were measured to calculate the strains. Residual strains were measured in the x and y direction to understand the impact of the presence of a exit hole and internal hollow geometry. The results of volumetric residual strain in the x and y directions showed no significant variations in the distribution of the strain due to the presence of a hollow structure as well as the exit hole. Overall, no significant stress concentration was observed in the heat treated sample. Sample geometry, instrumentation for neutron diffraction, and material properties are discussed in detail in this paper.

Raju, Nandhini↗
DOE OSTI2019

Consequences of magnetic ordering in chiral M n 1 / 3 Nb S 2

We have investigated here the structural, magnetic, thermodynamic, and charge-transport properties of M n 1 / 3 Nb S 2 single crystals through x-ray and neutron diffraction, magnetization, specific heat, magnetoresistance, and Hall-effect measurements. M n 1 / 3 Nb S 2 displays a magnetic transition at T C ~ 45 K with highly anisotropic behavior expected for a hexagonal-structured material. Below T C , neutron diffraction reveals increased scattering near the structural Bragg peaks having a wider Q dependence along the c axis than the nuclear Bragg peaks. This indicates either a short-range ferromagnetic (FM) order with a domain size of ~250 nm along the c axis or a possible magnetic modulation with a large pitch length. The expectation of a significant Dzyaloshinskii-Moriya interaction in this chiral-structured magnet, along with the helical state discovered in isostructural C r 1 / 3 Nb S 2 , suggest either a long period helical state with q ~ 0.0025 Å - 1 , or FM regions separated by magnetic solitons, may be responsible for the apparent small size of the FM domains. Here, the domain length along the c axis is substantially larger than the pitch length of 48 nm found for the helimagnetic state in C r 1 / 3 Nb S 2 . Specific-heat-capacity measurements confirm a second-order magnetic phase transition with a substantial magnetic contribution that persists to low temperature. The low-temperature specific-heat capacity is consistent with a large density of low-lying magnetic excitations that are likely associated with topologically interesting magnetic modes. Changes to the magnetoresistance, the magnetization, and the magnetic neutron diffraction, which become more apparent below 20 K, imply a modification in the character of the magnetic ordering corresponding to the magnetic contribution to the specific-heat capacity. These determinations signify a more complex magnetic structure both at zero and finite fields for M n 1 / 3 Nb S 2 than for the well-investigated C r 1 / 3 Nb S 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Improved joint X-ray and neutron refinement procedure in Phenix

Neutron diffraction is one of the three crystallographic techniques (X-ray, neutron and electron diffraction) used to determine the atomic structures of molecules. Its particular strengths derive from the fact that H (and D) atoms are strong neutron scatterers, meaning that their positions, and thus protonation states, can be derived from crystallographic maps. However, because of technical limitations and experimental obstacles, the quality of neutron diffraction data is typically much poorer (completeness, resolution and signal to noise) than that of X-ray diffraction data for the same sample. Further, refinement is more complex as it usually requires additional parameters to describe the H (and D) atoms. The increase in the number of parameters may be mitigated by using the `riding hydrogen' refinement strategy, in which the positions of H atoms without a rotational degree of freedom are inferred from their neighboring heavy atoms. However, this does not address the issues related to poor data quality. Therefore, neutron structure determination often relies on the presence of an X-ray data set for joint X-ray and neutron (XN) refinement. In this approach, the X-ray data serve to compensate for the deficiencies of the neutron diffraction data by refining one model simultaneously against the X-ray and neutron data sets. To be applicable, it is assumed that both data sets are highly isomorphous, and preferably collected from the same crystals and at the same temperature. However, the approach has a number of limitations that are discussed in this work by comparing four separately re-refined neutron models. To address the limitations, a new method for joint XN refinement is introduced that optimizes two different models against the different data sets. This approach is tested using neutron models and data deposited in the Protein Data Bank. The efficacy of refining models with H atoms as riding or as individual atoms is also investigated.

36 MATERIALS SCIENCE↗
DOE OSTI2018

DEMAND, a Dimensional Extreme Magnetic Neutron Diffractometer at the High Flux Isotope Reactor

A two-dimensional (2D) Anger camera detector has been used at the HB-3A four-circle single-crystal neutron diffractometer at the High Flux Isotope Reactor (HFIR) since 2013. The 2D detector has enabled the capabilities of measuring sub-mm crystals and spin density maps, enhanced the efficiency of data collection and phase transition detection, and improved the signal-to-noise ratio. Recently, the HB-3A four-circle diffractometer has been undergoing a detector upgrade towards a much larger area, magnetic-field-insensitive, Anger camera detector. The instrument will become capable of doing single-crystal neutron diffraction under ultra-low temperatures (50 mK), magnetic fields (up to 8 T), electric fields (up to 11 kV/mm), and hydrostatic high pressures (up to 45 GPa). Furthermore, half-polarized neutron diffraction is also available to measure weak ferromagnetism and local site magnetic susceptibilities. With the new high-resolution 2D detector, the four-circle diffractometer has become more powerful for studying magnetic materials under extreme sample environment conditions; hence, it has been given a new name: DEMAND.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Isotropic parallel antiferromagnetism in the magnetic field induced charge-ordered state of $\mathrm{Sm Ru_4 P_{12}}$ caused by $p - f$ hybridization

Nature of the field-induced charge-ordered phase (phase II) of SmRu 4 P 12 has been investigated by resonant x-ray diffraction (RXD) and polarized neutron diffraction (PND), focusing on the relationship between the atomic displacements and the antiferromagnetic (AFM) moments of Sm. From the analysis of the interference between the nonresonant Thomson scattering and the resonant magnetic scattering, combined with the spectral function obtained from x-ray magnetic circular dichroism, it is shown that the AFM moment of Sm prefers to be parallel to the field (m AF ∥ H), giving rise to large and small moment sites around which the P 12 and Ru cage contract and expand, respectively. This is associated with the formation of the staggered ordering of the Γ 7 -like and Γ 8 -like crystal-field states, providing a strong piece of evidence for the charge order. PND was also performed to obtain complementary and unambiguous conclusion. In addition, isotropic and continuous nature of phase II is demonstrated by the field-direction invariance of the interference spectrum in RXD. Finally, crucial role of the p-f hybridization is shown by resonant soft x-ray diffraction at the P K edge (1s↔3p), where we detected a resonance due to the spin polarized 3p orbitals reflecting the AFM order of Sm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Neutron scattering study of tantalum monohydride and monodeuteride

Powder samples of TaH 0.89 and TaD0.96 are synthesized under a hydrogen (deuterium) pressure of 2.8 GPa and a temperature of 250 °C, then quenched to the liquid nitrogen temperature, recovered to ambient pressure and studied by neutron diffraction (ND) and inelastic neutron scattering (INS). The ND study shows that both hydrogen and deuterium atoms occupy tetrahedral interstitial sites in a distorted body centered cubic (bcc) crystal structure of metal atoms, while the ordering scenarios in TaH 0.89 and TaD 0.96 are different. Hydrogen and deuterium atoms are ordered in a layered fashion, forming long period superstructures with space groups P$\bar{4}$ and P222, respectively, so that the unit cells of the crystal structures of TaH 0.89 and TaD 0.96 are $\sqrt{2}$ × $\sqrt{2}$ × 7 and $\sqrt{2}$ × $\sqrt{2}$ × 8 supercells of the initial cubic unit cell. The INS study demonstrates a pronounced “soft” (trumpet-like) anharmonicity of the potential well for H and D atoms.

08 HYDROGEN↗
DOE OSTI2018

Phase transformations in oxides above 2000°C: experimental technique development

Here, the oxidation of boride and carbide-based ultra-high-temperature ceramics is the primary limiting factor for their use as aerodynamic surfaces. Understanding the behaviour of the oxides that can result from oxidation of metal borides and carbides at very high temperatures is essential to optimise and tailor the performance of these materials; yet experimental thermodynamic and structural data for refractory oxides above 2000°C are mostly absent. The following techniques that can be applied to fill this gap are discussed: (i) commercial ultra-high-temperature differential thermal analysis for investigation of phase transformations and melting in inert environments to 2500°C, (ii) a combination of laser heating with a splittable nozzle aerodynamic levitator for splat quenching and drop calorimetry from temperatures limited only by sample evaporation, (iii) synchrotron X-ray and neutron diffraction on laser-heated aerodynamically levitated oxide samples for in situ observation of phase transformations in variable atmospheres, refinement of high-temperature structures and thermal expansion. Recent experimental findings include anomalous thermal expansion of the defect fluorite phase of YSZ, thermodynamics of pyrochlore–fluorite transformation from high-temperature structure refinements, and measurement of thermal expansion to the melting temperatures and fusion enthalpies of Zr, Hf, La, Yb and Lu oxides. These methods provide temperatures, enthalpies and volume change for phase transformations above 2000°C, which are required for thermodynamic assessments and calculation of phase diagrams of multicomponent systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Complementary Measurements of Residual Stresses Before and After Base Plate Removal in an Intricate Additively-Manufactured Stainless-Steel Valve Housing

Residual stress measurements using neutron diffraction and the contour method were performed on a valve housing made from 316 L stainless steel powder with intricate three-dimensional internal features using laser powder-bed fusion additive manufacturing. The measurements captured the evolution of the residual stress fields from a state where the valve housing was attached to the base plate to a state where the housing was cut free from the base plate. Making use of this cut, thus making it a non-destructive measurement in this application, the contour method mapped the residual stress component normal to the cut plane (this stress field is completely relieved by cutting) over the whole cut plane, as well as the change in all stresses in the entire housing due to the cut. The non-destructive nature of the neutron diffraction measurements enabled measurements of residual stress at various points in the build prior to cutting and again after cutting. Good agreement was observed between the two measurement techniques, which showed large, tensile build-direction residual stresses in the outer regions of the housing. The contour results showed large changes in multiple stress components upon removal of the build from the base plate in two distinct regions: near the plane where the build was cut free from the base plate and near the internal features that act as stress concentrators. These observations should be useful in understanding the driving mechanisms for builds cracking near the base plate and to identify regions of concern for structural integrity. Neutron diffraction measurements were also used to show the shear stresses near the base plate were significantly lower than normal stresses, an important assumption for the contour method because of the asymmetric cut.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Enhancing fatigue life by ductile-transformable multicomponent B2 precipitates in a high-entropy alloy

Catastrophic accidents caused by fatigue failures often occur in engineering structures. Thus, a fundamental understanding of cyclic-deformation and fatigue-failure mechanisms is critical for the development of fatigue-resistant structural materials. Here we report a high-entropy alloy with enhanced fatigue life by ductile-transformable multicomponent B2 precipitates. Its cyclic-deformation mechanisms are revealed by real-time in-situ neutron diffraction, transmission-electron microscopy, crystal-plasticity modeling, and Monte-Carlo simulations. Multiple cyclic-deformation mechanisms, including dislocation slips, precipitation strengthening, deformation twinning, and reversible martensitic phase transformation, are observed in the studied high-entropy alloy. Its improved fatigue performance at low strain amplitudes, i.e., the high fatigue-crack-initiation resistance, is attributed to the high elasticity, plastic deformability, and martensitic transformation of the B2-strengthening phase. This study shows that fatigue-resistant alloys can be developed by incorporating strengthening ductile-transformable multicomponent intermetallic phases.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetic structure of triangular lattice compound Tb2Ni0.90Si2.94

AlB 2 -type ternary intermetallic compound Tb 2 Ni 0.90 Si 2.94 (space group P 6=mmm, hP 3, No. 191) was reported to exhibit spin freezing behaviour of the ferromagnetic clusters present in the system below T f = 9:9 K, along with the presence of spatially limited antiferromagnetic phase. In this work, on the basis of variable temperature zero-field neutron diffraction measurements, we have shown that the antiferromagnetic phase transition occurs for the compound below T N ~13 K. Neutron diffraction study indicates ab-plane non-collinear sine-modulated antiferromagnetic ordering of the system with wave vectors of k 1 = [±1/6, ±1/6, 0] and k 2 = [±1/3, ±1/3, 0] down to 1.7 K. The weak and diffuse nature of the magnetic Bragg peaks along with limited coherence length further confirm the short-range nature of the antiferromagnetic phase in this compound.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Magnetic interactions in PdCrO 2 and their effects on its magnetic structure

We report a neutron scattering study of the metallic triangular lattice antiferromagnet PdCrO 2 . Powder neutron diffraction measurements confirm that the crystalline space group symmetry remains R$\bar{3}$m below T N . This implies that magnetic interactions consistent with the crystal symmetry do not stabilize the noncoplanar magnetic structure, which was one of two structures previously proposed on the basis of single crystal neutron diffraction measurements. Inelastic neutron scattering measurements find two gaps at low energies, which can be explained as arising from a dipolar-type exchange interaction. This symmetric anisotropic interaction also stabilizes a magnetic structure very similar to the coplanar magnetic structure, which was also suggested by the single crystal diffraction study. In conclusion, the higher-energy magnon dispersion can be modelled by linear spin-wave theory with exchange interactions up to sixth nearest neighbors, but discrepancies remain which hint at additional effects unexplained by the linear theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Presence of Induced Weak Ferromagnetism in Fe-Substituted YFe x Cr 1–x O 3 Crystalline Compounds

Fe-substituted YFe x Cr 1–x O 3 crystalline compounds show promising magnetic and multiferroic properties. Here we report the synthesis and characterization of several compositions from this series. Using the autocombustion route, various compositions (x = 0.25, 0.50, 0.6, 0.75, 0.9, and 1) were synthesized as high-quality crystalline powders. In order to obtain microscopic and atomic information about their structure and magnetism, characterization was performed using room temperature X-ray diffraction and energy dispersion analysis as well as temperature-dependent neutron diffraction, magnetometry, and 57 Fe Mössbauer spectrometry. Rietveld analysis of the diffraction data revealed a crystallite size of 84 (8) nm for YFeO 3 , while energy dispersion analysis indicated compositions close to the nominal compositions. The magnetic results suggested an enhancement of the weak ferromagnetism for the YFeO 3 phase due to two contributions. First, a high magnetocrystalline anisotropy was associated with the crystalline character that favored a unique high canting angle of the antiferromagnetic phase (13°), as indicated by the neutron diffraction analysis. This was also evidenced by the high magnetic hysteresis curves up to 90 kOe by a remarkable high critical coercivity value of 46.7 kOe at room temperature. Second, the Dzyaloshinskii–Moriya interactions between homogenous and heterogeneous magnetic pairs resulted from the inhomogeneous distribution of Fe 3+ and Cr 3+ ions, as indicated by 57 Fe Mössbauer studies. Together, these results point to new methods of controlling the magnetic properties of these materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Investigating the non-classical M-H 2 bonding in OsClH 3 (PPh 3 ) 3

Dihydrogen ligation to metal centers results in a wide range of metal-hydrogen interactions. Compounds containing non-classical dihydrogen ligands in which the H-H contacts are significantly longer than the 0.74 A distance found in solid H 2 are classified as Kubas-like compounds, stretched dihydrogen ligands, or compressed dihydrides, depending on the H-H contact length. Compounds containing stretched dihydrogen and compressed dihydride ligands are somewhat rare. Developing a more complete understanding of the metal-hydrogen and hydrogen-hydrogen interactions in these species may provide insights into the mechanisms for the oxidative addition reaction and hydrogen storage. Here, we use diffraction and inelastic neutron scattering (INS) measurements, paired with both molecular and solid-state density functional theory (DFT), to fully characterize the nature of the metal-hydrogen and hydrogen-hydrogen interactions in a previously reported compound, OsClH 3 (PPh 3 ) 3 . In that report, the H-H distance was measured as 1.48(2) A by single-crystal neutron diffraction and was described as a "stretched" dihydrogen. The INS-generated phonon density of states is well described by the DFT calculations, including those normal modes dominated by the vibrational motions of the three Os-ligated hydrogen atoms. Additionally, the resulting calculated electron charge density landscape indicates that there is no remnant bonding character between the Os-ligated hydrogen atoms in the compound. Based on these findings, we update the understanding of the metal-hydrogen bonding in this complex and reclassify it as a compressed dihydride. As such, OsClH 3 (PPh 3 ) 3 represents a rare example of a non-classical compressed dihydride species.

08 HYDROGEN↗
DOE OSTI2021

Complex magnetic phases in the polar tetragonal intermetallic NdCoGe 3

Polar materials can host a variety of topologically significant magnetic phases, which often emerge from a modulated magnetic ground state. Relatively few noncentrosymmetric tetragonal materials have been shown to host topological spin textures and new candidate materials are necessary to expand the current theoretical models. This manuscript reports on the anisotropic magnetism in the polar, tetragonal material NdCoGe 3 via thermodynamic and neutron diffraction measurements. The previously reported H - T phase diagram is updated to include several additional phases, which exist for both H = 0 and with an applied field H ⊥ c . Neutron diffraction data reveal that the magnetic structures below T N 1 = 3.70 K and T N 2 = 3.50 K are incommensurate, with a ground-state magnetic order that is incommensurate in all directions with the propagation vector $\vec{k}$ = (0.494, 0.0044, 0.385) at 1.8 K. A unique magnetic structure solution is not achievable, but the possible single-$\vec{k}$ and $\vec{k}$ spin models are discussed. These results demonstrate that NdCoGe 3 hosts complicated magnetic order derived from modulated magnetic moments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Coexisting paramagnetic spins and long-range magnetic order in Ba4⁢(Ru0.92⁢Ir0.08)3⁢O10

We investigate the effect of dilute Ir substitution on the magnetism of the trimer-based ruthenate Ba4⁢Ru3⁢O10 using neutron diffraction, magnetic susceptibility measurements, first-principles calculations, and atomistic simulations. Neutron diffraction shows that Ir doping preserves the zigzag antiferromagnetic structure and the ordered-moment magnitude of the parent compound, in which the moments reside exclusively on the two outer Ru(2) sites of each Ru3⁢O12 trimer, while the central Ru(1) site remains nonmagnetic. The Néel temperature is reduced from ∼105 to 84.0(1) K upon 8% Ir substitution, while magnetic susceptibility reveals a pronounced low-temperature Curie-like upturn, indicating the coexistence of paramagnetic spins with long-range antiferromagnetic order. Density-functional calculations show that Ir preferentially occupies the central Ru(1) site, which disrupts the exchange pathways of the affected Ru3⁢O12 trimer state. Atomistic simulations incorporating this paramagnetic dilution reproduce the suppressed ordering temperature and the coexistence of ordered and paramagnetic components.

Islam, Farhan [Ames Laboratory]↗
DOE OSTI2021

Chiral properties of the zero-field spiral state and field-induced magnetic phases of the itinerant kagome metal YMn 6 Sn 6

Applying a magnetic field in the hexagonal plane of YMn 6 Sn 6 leads to a complex magnetic phase diagram of commensurate and incommensurate phases, one of which coexists with the topological Hall effect (THE) generated by a unique fluctuation-driven mechanism. Using unpolarized neutron diffraction, we report on the solved magnetic structure for two previously identified, but unknown, commensurate phases. These include a low-temperature, high-field fanlike phase and a room-temperature, low-field canted antiferromagnetic phase. Here, an intermediate incommensurate phase between the fanlike and forced ferromagnetic phases is also identified as the last known phase of the in-plane field-temperature diagram. Additional characterization using synchrotron powder diffraction reveals extremely high-quality, single-phase crystals, which suggests that the presence of two incommensurate magnetic structures throughout much of the phase diagram is an intrinsic property of the system. Interestingly, polarized neutron diffraction shows that the centrosymmetric system hosts preferential chirality in the zero-field double-flat-spiral phase, which, along with the THE, is a topologically nontrivial characteristic.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Neutron vibrational spectroscopic evidence for short H∙∙∙H contacts in the RNiInH 1.4; 1.6 (R = Ce, La) metal hydride

Intermetallic metal hydrides are critical materials for hydrogen storage applications, however, metal hydrides with greater storage capacities are still needed. Within metal hydrides, the volumetric storage capacities are limited by the number of hydrogen-accommodating interstitial sites which can be simultaneously occupied given a minimum hydride nearest-neighbor distance of ~2.1 A, according to the Switendick-Westlake criterion. To date, violations of this criterion are rare. Perhaps the most well studied compounds violating this criterion are the RNiInHx compounds (R = Ce, La, Nd). Previous neutron diffraction studies on the deuterated species revealed the presence of Ni-D∙∙∙D-Ni-D∙∙∙D-Ni chains with anomalously close D∙∙∙D contacts of ~1.6 A. Yet there are no neutron vibrational spectroscopic investigations reported for these atypical hydrides. Here we use neutron vibrational spectroscopy (NVS) measurements to probe the hydrogen dynamics in LaNiInHx (x = 0.67, 1.6) and CeNiInH 1.4 . For x > 0.67, the presence of close H...H contacts yields two related features in the vibrational spectrum centered near ~90 meV corresponding to the oscillations of paired H atoms simultaneously occupying neighboring R 3 Ni tetrahedra. Notably, these features are energetically distinct from comparable vibrational motions for "unpaired" H atoms when x = 0.67. To compare, we also present powder neutron diffraction and NVS measurements for the newly characterized, chemically similar Sn compounds CeNiSnH, CeNiSnH 2 , and CeNiSnD 2 . These compounds also contain R 3 Ni tetrahedra, however, the H-occupied tetrahedra are well separated from each other with the closest H∙∙∙H distances exceeding 2.1 A, and the Switendick-Westlake criterion is not violated. Consequently, the spectral signature of the close H∙∙∙H contacts is absent in these hydrides.

08 HYDROGEN↗
DOE OSTI2021

Effects of Zr addition on lattice strains and electronic structures of NbTaTiV high-entropy alloy

We report the room-temperature (RT) deformation behavior for two single-phase body-centered-cubic (BCC) refractory high-entropy alloys (RHEAs), NbTaTiV and NbTaTiVZr, has been comprehensively investigated via in-situ neutron-diffraction experiments. Our work shows that the addition of Zr leads to the transition of mechanical response from ductile to brittle behavior. The results of lattice-strain evolutions obtained from in-situ neutron diffraction for the ductile NbTaTiV RHEA exhibit atypical plastic-deformation behavior, i.e., the reduced plasticanisotropic deformation, leading to an even distribution of the applied stress amongst the grains with different orientations rather than forming stress concentrations in {200}-oriented grains during plastic-deformation. Density functional theory (DFT) analysis shows that NbTaTiVZr has a lower electron density at the Fermi level, larger lattice distortion, and stronger charge transfer, as compared to NbTaTiV, suggesting higher strength and lower ductility in NbTaTiVZr, which are consistent with the current experimental results.

36 MATERIALS SCIENCE↗