Search NASA⌕ Search

SEARCH · Search NASA

Results for “OPEN PLASMA DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Temporal and spatial resolved optical emission behaviors of a cold atmospheric pressure plasma jet

The propagation behavior of cold atmospheric pressure plasma jets has recently attracted lots of attention. In this paper, a cold He plasma jet generated by a single plasma electrode jet device is studied. The spatial-temporal resolved optical emission spectroscopy measurements are presented. It is found that the emission intensity of the He 706.5 nm line of the plasma behaves similarly both inside the syringe and in the surrounding air (plasma plume). It decreases monotonously, which is different from the emission lines, such as N{sub 2} 337.1 nm line, N{sub 2}{sup +} 391.4 nm line, and O 777.3 nm line. For the discharge inside the syringe, the emission intensity of the He 706.5 nm line decays more rapidly than that of the other three spectral lines mentioned above. The N{sub 2} 337.1 nm line behaves a similar time evolution with the discharge current. For the N{sub 2}{sup +} 391.4 nm line and the atomic O 777.3 nm line, both of them decay slower than that of the He 706.5 nm and the N{sub 2} 337.1 nm. When the plasma plume propagates further away from the nozzle, the temporal behaviors of the emission intensities of the four lines tend to be similar gradually. Besides, it is found that, when the size of the plasma bullet appears biggest, the propagation velocity of the bullet achieves its highest value while the emission intensity of the N{sub 2}{sup +} 391.4 nm line reaches its maximum. Detailed analysis shows that the Penning effect between the metastable state He{sub m} and the air molecules may play a significant role in the propagation of the plasma bullet in the open air.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Composition And Electrical Properties Of Dust From Tokamak Compass

In spite of the fact that fusion is a subject of the study for many years, there are still a lot of open questions. One of the interesting topics in fusion research is a presence of dust grains in reactors. In the paper, dust grains born in tokamak Compass are studied and compared with samples of a spherical geometry and well known composition. A unique experimental setup was used for investigations of charging properties of such grains and the SEM and EDX spectroscopy was applied for a study of grain composition. We focus on the secondary emission because this process plays a prominent role when a portion of energetic electrons is present in surroundings of a particular grain. It was shown that depending on the grain size and material, energetic electrons charge the grains to positive potentials comparable with the energy of impinging electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Parallel heat flux and flow acceleration in open field line plasmas with magnetic trapping

The magnetic field strength modulation in a tokamak scrape-off layer (SOL) provides both flux expansion next to the divertor plates and magnetic trapping in a large portion of the SOL. Previously, we have focused on a flux expander with long mean-free-path, motivated by the high temperature and low density edge anticipated for an absorbing boundary enabled by liquid lithium surfaces. Here, the effects of magnetic trapping and a marginal collisionality on parallel heat flux and parallel flow acceleration are examined. The various transport mechanisms are captured by kinetic simulations in a simple but representative mirror-expander geometry. The observed parallel flow acceleration is interpreted and elucidated with a modified Chew-Goldberger-Low model that retains temperature anisotropy and finite collisionality.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic neoclassical transport in the H-mode pedestal

Multi-species kinetic neoclassical transport through the QH-mode pedestal and scrape-off layer on DIII-D is calculated using XGC0, a 5D full-f particle-in-cell drift-kinetic solver with self-consistent neutral recycling and sheath potentials. Quantitative agreement between the flux-driven simulation and the experimental electron density, impurity density, and orthogonal measurements of impurity temperature and flow profiles is achieved by adding random-walk particle diffusion to the guiding-center drift motion. The radial electric field (E{sub r}) that maintains ambipolar transport across flux surfaces and to the wall is computed self-consistently on closed and open magnetic field lines and is in excellent agreement with experiment. The E{sub r} inside the separatrix is the unique solution that balances the outward flux of thermal tail deuterium ions against the outward neoclassical electron flux and inward pinch of impurity and colder deuterium ions. Particle transport in the pedestal is primarily due to anomalous transport, while the ion heat and momentum transport are primarily due to the neoclassical transport. The full-f treatment quantifies the non-Maxwellian energy distributions that describe a number of experimental observations in low-collisionallity pedestals on DIII-D, including intrinsic co-I{sub p} parallel flows in the pedestal, ion temperature anisotropy, and large impurity temperatures in the scrape-off layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pit rim decomposition into multiple quantum dots on surfaces of epitaxial thin films grown on pit-patterned substrates

Here, we report results of dynamical simulations according to an experimentally validated surface morphological evolution model on the formation of regular arrays of quantum dot molecules (QDMs) consisting of 1D arrays of smaller interacting quantum dots (QDs). These QD arrays form along the sides of each pit rim on the surface of a coherently strained thin film epitaxially deposited on a semiconductor substrate, the surface of which consists of a periodic pattern of inverted prismatic pits with rectangular pit openings. We find that this complex QDM pattern results from the decomposition of the pit rim from a “quantum fortress” with four elongated QDs into four 1D arrays of multiple smaller QDs arranged along each side of the pit rim. Systematic parametric analysis indicates that varying the pit opening dimensions and the pit wall inclination directly impacts the number of QDs in the resulting QDM pattern, while varying the pit depth only affects the dimensions of the QDs in the nanostructure pattern. Therefore, the number, arrangement, and sizes of QDs in the resulting pattern of QDMs on the film surface can be engineered precisely by proper tuning of the pit design parameters. Our simulation results are supported by predictions of morphological stability analysis, which explains the pit rim decomposition into multiple QDs as the outcome of a tip-splitting instability and provides a fundamental characterization of the post-instability nanostructure pattern. Our theoretical findings can play a vital role in designing optimal semiconductor surface patterns toward enabling future nanofabrication technologies.

36 MATERIALS SCIENCE↗

Hydrodynamic conditions in laser irradiated buried layer experiments

The calculation of open shell ionization level and radiative properties of materials in Non-Local Thermal Equilibrium (NLTE) is currently still a major challenge for any atomic model. The predictions of various NLTE atomic codes at these conditions still differ significantly. In recent years, a new buried layer platform was developed at the Lawrence Livermore National Laboratory and the Laboratory for Laser Energetics. This platform is used to measure ionization distribution and emission of open L-shell, mid-Z ions and open M-shell, high-Z ions at NLTE conditions that are relevant in many laser plasma applications. These experiments offer a unique chance for benchmarking the atomic models. In order to perform these experiments, a uniform well characterized plasma source is required. In this work, we present one-dimensional (1D) and two-dimensional simulations of the experimental platform. These simulations were used for both the design and the analysis of the experiments. The simulations demonstrate the different phases of hydrodynamic evolution of the target and identify the time windows in which uniform conditions can be achieved. A 1D expansion of the target was found to be adequate to describe the target's evolution for most of the experiment duration. The fast 1D simulations were compared with recent experimental results from the Omega laser facility. The sensitivity of the results to several modeling parameters such as the electron flux limiter and laser resonant absorption is reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-ray pinhole camera setups used in the Atomki ECR Laboratory for plasma diagnostics

Imaging of the electron cyclotron resonance (ECR) plasmas by using CCD camera in combination with a pinhole is a non-destructive diagnostics method to record the strongly inhomogeneous spatial density distribution of the X-ray emitted by the plasma and by the chamber walls. This method can provide information on the location of the collisions between warm electrons and multiple charged ions/atoms, opening the possibility to investigate the direct effect of the ion source tuning parameters to the plasma structure. The first successful experiment with a pinhole X-ray camera was carried out in the Atomki ECR Laboratory more than 10 years ago. The goal of that experiment was to make the first ECR X-ray photos and to carry out simple studies on the effect of some setting parameters (magnetic field, extraction, disc voltage, gas mixing, etc.). Recently, intensive efforts were taken to investigate now the effect of different RF resonant modes to the plasma structure. Comparing to the 2002 experiment, this campaign used wider instrumental stock: CCD camera with a lead pinhole was placed at the injection side allowing X-ray imaging and beam extraction simultaneously. Additionally, Silicon Drift Detector (SDD) and High Purity Germanium (HPGe) detectors were installed to characterize the volumetric X-ray emission rate caused by the warm and hot electron domains. In this paper, detailed comparison study on the two X-ray camera and detector setups and also on the technical and scientific goals of the experiments is presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Safeguard Requirements for Fusion Power Plants

Nuclear proliferation risks from magnetic fusion energy associated with access to fissile materials can be divided into three main categories: 1) clandestine production of fissile material in an undeclared facility, 2) covert production and diversion of such material in a declared and safeguarded facility, and 3) use of a declared facility in a breakout scenario, in which a state openly produces fissile material in violation of international agreements. The degree of risk in each of these categories is assessed, taking into account both state and non-state actors, and it is found that safeguards are required for fusion energy to be highly attractive from a non-proliferation standpoint. Specific safeguard requirements and R&D needs are outlined for each category of risk, and the technical capability of the ITER experiment, under construction, to contribute to this R&D is noted. A preliminary analysis indicates a potential legal pathway for fusion power systems to be brought under the Treaty for the Non-Proliferation of Nuclear Weapons. "Vertical" proliferation risks associated with tritium and with the knowledge that can be gained from inertial fusion energy R&D are outlined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hard magnetohydrodynamic limit in 1/3 sawtooth like activity in LHD

The optimization of LHD discharges in inward-shifted configurations with 1/3 sawtooth like activity is an open issue. These relaxation events limit the LHD performance driving a periodic plasma deconfinement. The aim of this study is to analyze the 1/3 sawtooth like activity in plasmas with different stability properties to foreseen the best operation conditions and minimize its undesired effects. We summarize the results of several MHD simulations for plasmas with Lundquist numbers between 10{sup 5} and 10{sup 6} in the slow reconnection regime, studying the equilibria properties during the onset of a chain of 1/3 sawtooth like events. The research conclusions point out that the hard MHD limit can be reached in the inner plasma region after the onset of a strong 1/3 resonant sawtooth like event and trigger a plasma collapse. The collapse can be avoided if the system remains in the soft MHD limit, namely, in a regime with a pressure gradient and a magnetic turbulence below the critical values to drive the soft-hard MHD transition. In the soft MHD limit the system relaxations are the non resonant 1/3 sawtooth like events or a weak version of the 1/3 resonant sawtooth like events. A system relaxation in the soft MHD regime drives a minor plasma deconfinement that does not limit the LHD performance if the event periodicity is not very high.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Partnership for Edge Physics Simulation (EPSI)

We propose to develop advanced simulation codes, based upon an extreme parallelism, first principles kinetic approach, to address the challenges associated with the edge region of magnetically confined plasmas. This work is relevant to both existing magnetic fusion facilities and essential for next-generation burning plasma experiments, such as ITER where success is critically dependent upon H-mode operation achieving an edge pedestal of sufficient height for good core plasma performance without producing deleterious large scale edge localized instabilities. The plasma edge presents a well-known set of multi-physics, multi-scale problems involving complex 3D magnetic geometry. Perhaps the greatest computational challenge is the lack of scale separation – temporal scales for drift waves, Alfven waves, ELM dynamics for example have strong overlap. Similar overlap occurs on the spatial scales for the ion poloidal gyro-radius, drift wave and pedestal width. The traditional approach of separating fusion problems into weakly interacting spatial or temporal domains clearly breaks down in the edge. A full kinetic model (full-f model) must be solved to understand and predict the edge physics including non-equilibrium thermodynamic issues arising from the magnetic topology (the open field lines producing a spatially sensitive velocity hole), plasma wall interactions, neutral and atomic physics. The plan here is to model these phenomena within a comprehensive first principles set of equations without the need for the insurmountable multiple-codes coupling issues by building on the XGC1 code developed under the SciDAC Proto-FSP Center for Plasma Edge Simulation (CPES). This proposal includes the critical participants in the XGC1 development. We propose enhancing the capability of XGC1 by including all the important turbulence physics contained in kinetic ion and electron electromagnetic dynamics, by extending the PIC technology to incorporate several positive features found in the Eulerian grid technology, combining the coarse grained XGC0 code into it with a multiscale projective time integration technique to be developed in the project for experimental time scale simulation of the edge multi-physics, and by implementing modern computational technologies to move forward with the extreme scale heterogeneous hardware/software platform development. Ultra-fast edge localized instabilities, involving compressional Alven modes, will be studied using a proper MHD or two-fluid codes employing kinetic closure information from XGC. The proposed research integrates the most important physical processes on overlapping temporal and spatial scales, to study (i) transitions and thresholds for enhanced confinement regimes, (ii) the predictive understanding of the edge pedestal formation, structure and dynamics, (iii) the effect of the edge plasma on the core confinement, (iv) the physics of Edge Localized Modes and their suppression or mitigation via external control techniques, and (v) the heat load on the material wall. Our approach will implement physical models that are valid in their relevant collisionality regimes for current experiments and future burning plasma devices. Comparisons with experimental data will be made at multiple levels including characterization of turbulence dynamics, flux-gradient responses in the energy, particle and momentum channels, and observations of global phenomena such as L-H transitions, momentum generation, ELM dynamics, ELM-free regimes and the tokamak density limit. The proposal team has established strong connections, through joint membership, with other organizations that will be critical for success. These include FASTMath, SUPER and QUEST Institutes respectively for meshing tools and solvers; code performance tuning and uncertainty quantification as well as a proposed Data Management and Visualization Institute.. We will also be teaming with ongoing fusion SciDAC’s: CSWPI for RF-edge plasmas interactions; CEMM for the M3D MHD simulations and with PEPSC for incorporation of energetic particle physics. Finally, the team includes representatives from each of the major U.S. experimental facilities who will coordinate the validation program and the development of synthetic diagnostics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reduction of RF sheaths potentials by compensation or suppression of parallel RF currents on ICRF antennae

Radio Frequency (RF) sheaths are suspected to limit the performance of present-day Ion Cyclotron Range of Frequencies (ICRF) antennae over long pulses and should be minimized in future Fusion devices. Within the simplest models, RF sheath effects are quantified by the integral V{sub RF} {integral}E{sub ||}{center_dot}dl where the parallel RF field E{sub ||} is linked with the slow wave. On 'long open field lines' with large toroidal extension on both sides of the antenna it was shown that V{sub RF} is excited by parallel RF currents j{sub ||} flowing on the antenna structure. We thus propose two ways to reduce |V{sub RF}| by acting on j{sub ||} on the antenna front face. The first method, more adapted for protruding antennae, consists in avoiding the j{sub ||} circulation on the antenna structure, by slotting the antenna frame on its horizontal edges and by cutting partially the Faraday screen rods. The second method, well suited for recessed antennae, consists in compensating j{sub ||} of opposite signs along long flux tubes, with parallelepiped antennae aligned with tilted flux tubes. The different concepts are assessed numerically on a 2-strap Tore Supra antenna phased [0, {pi}] using near RF fields from the antenna code TOPICA. Simulations stress the need to suppress all current paths for j{sub ||} to reduce substantially |V{sub RF}| over the whole antenna height.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Real time MHD mode control using ECCD in KSTAR: Plan and requirements

For a high-performance, advanced tokamak mode in KSTAR, we have been developing a real-time control system of MHD modes such as sawtooth and Neo-classical Tearing Mode (NTM) by ECH/ECCD. The active feedback control loop will be also added to the mirror position and the real-time detection of the mode position. In this year, for the stabilization of NTM that is crucial to plasma performance we have implemented open-loop ECH antenna control system in KSTAR Plasma Control System (PCS) for ECH mirror movement during a single plasma discharge. KSTAR 170 GHz ECH launcher which was designed and fabricated by collaboration with PPPL and POSTECH has a final mirror of a poloidally and toroidally steerable mirror. The poloidal steering motion is only controlled in the real-time NTM control system and its maximum steering speed is 10 degree/sec by DC motor. However, the latency of the mirror control system and the return period of ECH antenna mirror angle are not fast because the existing launcher mirror control system is based on PLC which is connected to the KSTAR machine network through serial to LAN converter. In this paper, we present the design of real time NTM control system, ECH requirements, and the upgrade plan.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Edge-localized-modes in tokamaks

Edge-localized-modes (ELMs) are a ubiquitous feature of H-mode in tokamaks. When gradients in the H-mode transport barrier grow to exceed the MHD stability limit the ELM instability grows explosively, rapidly transporting energy and particles onto open field lines and material surfaces. Though ELMs provide additional particle and impurity transport through the H-mode transport barrier, enabling steady operation, the resulting heat flux transients to plasma facing surfaces project to large amplitude in future low collisionality burning plasma tokamaks. Measurements of the ELM heat flux deposition onto material surfaces in the divertor and main chamber indicate significant broadening compared to inter-ELM heat flux, with a timescale for energy deposition that is consistent with sonic ion flow and numerical simulation. Comprehensive ELM simulation is highlighting the important physics processes of ELM transport including parallel transport due to magnetic reconnection and turbulence resulting from collapse of the H-mode transport barrier. Encouraging prospects for ELM control and/or suppression in future tokamaks include intrinsic modes of ELM free operation, ELM triggering with frequent small pellet injection and the application of 3D magnetic fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Challenging conventional assumptions in PV: a high-throughput open-air approach to low-cost perovskite module production

Perovskite solar modules (PSMs) offer a promising pathway to low-cost photovoltaics, yet their commercialization is challenged by manufacturing scalability, device uniformity, additive costs, interlayer complexity, and module stability. This study introduces a comprehensive technoeconomic analysis of single junction PSM's and projections for tandem perovskite-Si modules that integrate all materials and manufacturing steps, module performances, projected lifetimes, and manufacturing costs across scales. Here, we highlight an open-air manufacturing approach to fabricate all active layers of serially interconnected PSMs, including electrodes and charge transport layers, enabling high-throughput production without inert or vacuum environments. The analysis reveals two orders of magnitude throughput enhancement and cost reductions of 24% in all-open-air production, escalating to over 60% at 1 GW factory capacity compared to conventional methods. Levelized cost of energy (LCOE) projections for utility-scale installations over 30 years, accounting for module replacement and recycling, demonstrate the potential to achieve the 2030 US target of $0.03 per kWh with realistic 7–11-year PSM lifetimes, outperforming incumbent silicon-based modules. Neither four terminal (4T) nor two terminal (2T) tandem-Si PSMs improve over single junction perovskite or silicon LCOE regardless of higher efficiencies at any modeled lifetime. Addressing PSM technical challenges with a cost-modeling framework guides commercialization efforts and provides a convincing pathway for challenging incumbent Si-based PV.

14 SOLAR ENERGY↗

First results on disruption mitigation by massive gas injection in Korea Superconducting Tokamak Advanced Research

Massive gas injection (MGI) system was developed on Korea Superconducting Tokamak Advanced Research (KSTAR) in 2011 campaign for disruption studies. The MGI valve has a volume of 80 ml and maximum injection pressure of 50 bar, the diameter of valve orifice to vacuum vessel is 18.4 mm, the distance between MGI valve and plasma edge is {approx}3.4 m. The MGI power supply employs a large capacitor of 1 mF with the maximum voltage of 3 kV, the valve can be opened in less than 0.1 ms, and the amount of MGI can be controlled by the imposed voltage. During KSTAR 2011 campaign, MGI disruptions are carried out by triggering MGI during the flat top of circular and limiter discharges with plasma current 400 kA and magnetic field 2-3.5 T, deuterium injection pressure 39.7 bar, and imposed voltage 1.1-1.4 kV. The results show that MGI could mitigate the heat load and prevent runaway electrons with proper MGI amount, and MGI penetration is deeper under higher amount of MGI or lower magnetic field. However, plasma start-up is difficult after some of D{sub 2} MGI disruptions due to the high deuterium retention and consequently strong outgassing of deuterium in next shot, special effort should be made to get successful plasma start-up after deuterium MGI under the graphite first wall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simple thermal vapor deposition process for and characterization of n-type indium oxysulfide thin films

The search continues for alternative nontoxic n-type electron transport layers in optoelectronic thin-film devices. Indium oxysulfide, In 2 (O,S) 3 , represents one promising material for this application, especially when paired with chalcogenide absorber layers. The ternary nature of the composition allows for electrical conductivity and optical bandgap tuning by tailoring the sulfur to oxygen ratio in the oxysulfide alloy. However, thin films of In 2 (O,S) 3 are typically deposited only by chemical bath deposition or plasma-enhanced atomic layer deposition. Here we report deposition of thin films of In 2 (O,S) 3 in a custom-built thermal reactor using only water vapor and hydrogen sulfide as the coreactants. This advance is enabled by the use of a recently reported, highly reactive indium formamidinate precursor. As shown by x-ray photoelectron spectroscopy, the composition can be tuned from pure In 2 (O,S) 3 to pure In 2 S 3 by varying the ratio of cycles employing water or hydrogen sulfide. The oxygen to the sulfur ratio in the film can be controlled by altering the dose sequence, although films typically contain more sulfur than would be expected naively from the percentage of hydrogen sulfide doses in the deposition recipe. Rutherford backscattering spectrometry confirms the composition is sulfur-rich relative to the dosing ratio. Structural characterization indicates films are relatively amorphous in nature. Electrically, these films offer reasonably constant electron mobility at different O:S ratios, with an electron concentration tunable over 4 orders of magnitude. These oxysulfide films possess a higher indirect bandgap than their oxygen-free indium sulfide counterparts, indicating higher transmittance to blue light. These indium oxysulfide films may be suitable candidates for electron transport layers in thin-film solar cells where their wider bandgap might result in higher optical transparency and thus short circuit current density, while the tunability of their conduction band offset with an absorber layer may result in higher open circuit voltage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Efficiency, Inexpensive Thin Film III-V Photovoltaics using Single-Crystalline-Like, Flexible Substrates

An innovative, non-mainstream approach has been developed to fabricate inexpensive GaAs solar cells directly on epi-ready flexible metal substrates. Using templates made by ion beam assisted deposition (IBAD) and epitaxial germanium films made by Plasma Enhanced Chemical Vapor Deposition (PECVD), epitaxial GaAs films with high opto-electronic and structural quality have been grown on metal substrates using metal organic chemical vapor deposition (MOCVD). Crystallographic out-of-plane and in-plane texture spread less than 1 degree full-width-at-half-maximum (FWHM) was achieved in undoped, n-type and p-type GaAs films as well as in AlGaAs films on metal substrates. Electron mobility of >1300 cm 2 /V-s was attained in GaAs:Si n-type films. Also, hole mobility of >100 cm 2 /V-s was measured in GaAs:Zn films. Consistent doping was obtained in GaAs:Si (10 15 -10 18 cm -3 ), and GaAs:Zn films (10 17 -10 19 cm -3 ), necessary for the active device layers of a GaAs solar cell. Defect reduction techniques (thermal cycling, superlattice structures) were implemented to reduce defect density in GaAs films from 1 × 10 9 cm -2 to 9 × 10 7 cm -2 . Lifetime of 2.3 ns was obtained in AlGaAs/GaAs double-heterostructure device. Solar cells were fabricated based on designs using 1-dimensional and 2-dimensional simulations tailored to the specific properties of the GaAs films on metal substrates. All device fabrication processes (lithography, anti-reflection coating (ARC), device isolation and mesa formation and ohmic metal electrode formation) suitable for III-V solar cell fabrication on metal substrates were fully developed. A bi-layered ARC using ZnS and MgF 2 was used to minimize the reflection over wide range of spectrum. When this ARC was applied after removal of the parasitic absorption layer, the conversion efficiencies were improved up to 11.1% with V oc = ~0.621 V, J sc = ~24.5 mA/cm 2 , and FF = ~0.735. Yet another accomplishment in this project was the development of all electrically-conducting architecture for GaAs solar cells on metal substrates. Biaxial-texture was successfully achieved in all electrically-conducting buffer layer on metal substrate in structure based on IBAD TiN instead of IBAD MgO. The all electrically-conducting Ge/NiSi 2 /TiN/IBAD-TiN/Hastelloy substrate was used to fabricate back contacts for vertically conducting solar cell structures on metal substrates. A metallic resistivity as low as 4.17 μΩ•cm was obtained. A significant improvement of the texture of the Ge template was achieved using a Ag buffer layer between the TiN films. Epitaxial GaAs was successfully grown on the all-electrically-conducting buffer architecture. A Liquid Phase Epitaxy (LPE) method to drastically increase grain size of epitaxial Ge while maintaining the single-crystalline-like texture. Grain size up to 35 µm was achieved in LPE Ge grown on sputtered Ge with a grain size of ~ 1 µm on IBAD template on metal substrate. Epitaxial GaAs was grown on LPE Ge, with an out-of-plane texture of 0.34° compared to 0.98° in GaAs grown on sputter deposited Ge. A model was developed to simulate the effect of grain boundaries as a function of grain size of GaAs films on metal substrates. This model showed that even the very low angle grain boundaries (<1º misorientation) of our GaAs films led to decrease in Voc. Hydrogen plasma passivation treatment is being developed to improve open circuit voltage and the conversion efficiency of GaAs solar cells on flexible substrate.

14 SOLAR ENERGY↗

Spontaneous onset of magnetic reconnection in toroidal plasma caused by breaking of 2D symmetry

Magnetic reconnection is studied in the collisionless limit at the Versatile Toroidal Facility (VTF) at MIT. Two distinct magnetic configurations are applied in the experiments; an open magnetic cusp and a closed cusp. In the open cusp configurations, the field lines intersect the the vacuum vessel walls and here axisymmetric oscillatory reconnection is observed. Meanwhile, in the closed cusp configuration, where the field lines are confined inside the experiment, the coupling between global modes and a current sheet leads to powerful bursts of 3D spontaneous reconnection. These spontaneous events start at one toroidal location, and then propagate around the toroidal direction at the Alfven speed (calculated with the strength of the dominant guide field). The three dimensional measurements include the detailed time evolution of the plasma density, current density, the magnetic flux function, the electrostatic potential, and the reconnection rate. The vastly different plasma behavior in the two configurations can be described using a simple theoretical framework, linking together the interdependencies of the reconnection rate, the in-plane electrostatic potential, and the parallel electron currents. We find that it is the breaking of toroidal symmetry by the global mode that allows for a localized disruption of the x-line current and hereby facilitates the onset of spontaneous reconnection.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗