Search NASA⌕ Search

SEARCH · Search NASA

Results for “ORIENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Comparative Evaluation of Control-Oriented Heavy Duty Vehicle Air Drag Coefficient Models

Heavy-duty vehicles (HDVs) are a significant source of fuel consumption and greenhouse gas emissions, prompting solutions such as HDV platooning to mitigate these negative impacts through air drag reduction. The intervehicle distance in an HDV platoon needs to be carefully selected, such that the platoon-level energy efficiency and safety considerations can be well balanced. Underlying this problem lies in accurately modeling the relationship between HDV air drag coefficient and intervehicle distance. Through comprehensive evaluation and comparison, we analyze five control-oriented HDV air drag coefficient models, including the polynomial model, rational polynomial model, rational model, semi-quadratic model, and ridge model. Leveraging Scipy Curve-Fit toolbox and our previously compiled air drag coefficient datasets, we optimally identify the parameters inside each model. The calibrated models are then thoroughly evaluated via five complementary metrics. The comparison results reveal that the semi-quadratic model has the highest overall performance, while the widely adopted rational model only exhibits suboptimal performance.

Best, Micah↗
DOE OSTI2022

Orientation-selected micro-pillar compression of additively manufactured 316L stainless steels: Comparison of as-manufactured, annealed, and proton-irradiated variants

In this work, irradiation response and deformation mechanisms of additively manufactured (AM) 316L stainless steel were studied by atomic scale characterization and micro-pillar compression. The AM 316L stainless steels were fabricated by direct energy deposition, a laser-based additive manufacturing process. Irradiation with 2 MeV protons at 360°C was performed to create ~1.8 displacements-per-atom (dpa) damage in AM 316L. Deformation behaviors of the as-manufactured, annealed, and proton-irradiated variants were studied, focusing on the effects of manufacturing-induced pores, residual stress, and irradiation-introduced defects (dislocation loops and voids). Micro-pillars were prepared from grains of pre-selected orientation, avoiding contributions of grain boundaries and allowing determination of resolved shear stress on {111} glide planes. Transmission electron microscopy was used to characterize the pre- and post-deformation microstructure. It was found that in the as-manufactured alloy variant, moving dislocations were the major deformation carrier, with noticeable blocking by fabrication-induced pores, In the annealed variant, hardness was reduced, and deformation was also accomplished by dislocation gliding. In the proton-irradiated variant, significant twinning was observed. Comparing measured resolved shear stress and predicted critical stress for dislocation dissociation, we conclude that irradiation hardening became high enough to activate twinning. Therefore, the deformation mechanism changes from dislocation gliding to twinning. The study is important for both processing optimization and performance evaluation of AM alloys for reactor applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Localized orientation gradients in additively manufactured stainless steel 316H structures

The high solidification rates during additive manufacturing cause highly localized thermal and strain gradients. The effect of these gradients on the evolution of local orientation misorientations within a grain is not well understood. In this study, stainless steel 316H parts were fabricated via laser powder bed fusion using three different energy densities: 43, 71, and 135 J/mm 3 . Electron backscatter diffraction showed that the maximum misorientations of the grains can be up to 25° along the build direction. Misorientation gradients (RM g ) within grains are process-dependent and can change from 0.036°/μm to 0.015°/μm with increased volumetric energy densities. In conclusion, the characterized misorientation gradients are an indication of the level of dislocations and, to an extent, the plastic deformation resulting from the rapid solidification during laser powder bed fusion.

316H↗
DOE OSTI2023

Influence of energy density on the microstructure, growth orientation, and anisotropy of magnetic properties in additively manufactured Fe-3.8wt%Si transformer steels

Fe-3.8wt%Si transformer steels were processed using two different additive manufacturing (AM) techniques, laser powder bed fusion (LPBF) and directed energy deposition (DED). While the LPBF processed samples exhibited a strong <001> orientation of the BCC grains along the build axis, the DED processed samples exhibited a randomized texture along the build axis. DED processed samples showed substantially coarser columnar grains as compared to their LPBF counterparts. Here, the columnar grains exhibited a substantial number of low-angle sub-grain boundaries. All samples exhibited very good soft magnetic properties, with saturation magnetization (M s ) values ranging from 205 - 232 emu/gm, and coercivity (H c ) values ranging from 1.2 – 4.2 Oe. The Coercivity (H c ) values were significantly lower when the magnetic field was applied parallel to the build axis, as compared to being perpendicular, which can be rationalized based on the columnar nature of the grains, resulting in a higher number density of grain boundaries in case of the field applied perpendicular to the build axis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Orientation and morphology of Pt nanoparticles in γ-alumina processed via ion implantation and thermal annealing

Structure and chemistry of metal/metal-oxide interfaces are critical for many catalytic processes and sensing. Pristine interfaces of Pt and γ-Al 2 O 3 were fabricated using high-energy ion implantation and thermal processing. Amorphous regions of alumina develop in single crystal α-alumina during Pt+ implantation and an 800 °C thermal treatment crystalizes amorphized alumina to γ-Al 2 O 3 and allows Pt ions to precipitate within the developing γ-alumina, yielding Pt nanoparticle tetrahedra terminated by {111} surfaces. The phase of alumina that developed and the distribution, morphology, and orientation of Pt nanoparticles was determined using x-ray diffraction, Rutherford backscattering spectrometry, transmission electron microscopy and scanning transmission electron microscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Flow over an espresso cup: inferring 3-D velocity and pressure fields from tomographic background oriented Schlieren via physics-informed neural networks

Tomographic background oriented Schlieren (Tomo-BOS) imaging measures density or temperature fields in three dimensions using multiple camera BOS projections, and is particularly useful for instantaneous flow visualizations of complex fluid dynamics problems. We propose a new method based on physics-informed neural networks (PINNs) to infer the full continuous three-dimensional (3-D) velocity and pressure fields from snapshots of 3-D temperature fields obtained by Tomo-BOS imaging. The PINNs seamlessly integrate the underlying physics of the observed fluid flow and the visualization data, hence enabling the inference of latent quantities using limited experimental data. In this hidden fluid mechanics paradigm, we train the neural network by minimizing a loss function composed of a data mismatch term and residual terms associated with the coupled Navier–Stokes and heat transfer equations. We first quantify the accuracy of the proposed method based on a two-dimensional synthetic data set for buoyancy-driven flow, and subsequently apply it to the Tomo-BOS data set, where we are able to infer the instantaneous velocity and pressure fields of the flow over an espresso cup based only on the temperature field provided by the Tomo-BOS imaging. Moreover, we conduct an independent PIV experiment to validate the PINN inference for the unsteady velocity field at a centre plane. To explain the observed flow physics, we also perform systematic PINN simulations at different Reynolds and Richardson numbers and quantify the variations in velocity and pressure fields. Furthermore, the results in this paper indicate that the proposed deep learning technique can become a promising direction in experimental fluid mechanics.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Comparison of Orientation Mapping in SEM and TEM

In this work, multiple experimental configurations for performing nanoscale orientation mapping are compared to determine their fidelity to the true 3D microstructure of a sample. Transmission Kikuchi Diffraction (TKD) experiments in an SEM and nanobeam diffraction (NBD) experiments in a TEM were performed on thin electrodeposited hard Au films with two different microstructures. The Au samples either have a grain size that is >50 nm or <20 nm. The same regions of the samples were measured with TKD apparatuses at 30 kV in an SEM with detectors in the horizontal and vertical configurations and in the TEM at 300 kV. Under the proper conditions, we demonstrate all three configurations can produce data of equivalent quality.Each method has strengths and challenges associated with its application and representation of the true microstructure. The conditions needed to obtain high-quality data for each acquisition method and the challenges associated with each will be discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A Three-Dimensional Reconstruction Algorithm for Scanning Transmission Electron Microscopy Data from a Single Sample Orientation

Abstract Increasing interest in three-dimensional nanostructures adds impetus to electron microscopy techniques capable of imaging at or below the nanoscale in three dimensions. We present a reconstruction algorithm that takes as input a focal series of four-dimensional scanning transmission electron microscopy (4D-STEM) data. We apply the approach to a lead iridate, PbIrO, and yttrium-stabilized zirconia, YZrO, heterostructure from data acquired with the specimen in a single plan-view orientation, with the epitaxial layers stacked along the beam direction. We demonstrate that Pb–Ir atomic columns are visible in the uppermost layers of the reconstructed volume. We compare this approach to the alternative techniques of depth sectioning using differential phase contrast scanning transmission electron microscopy (DPC-STEM) and multislice ptychographic reconstruction.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Design of Planarizing Growth Conditions on Unpolished and Faceted (100)-Oriented GaAs Substrates Using Hydride Vapor Phase Epitaxy

Here we performed a design of experiments (DoE) analysis to determine the effect of various growth parameters on in situ planarizing overgrowth of rough substrates using hydride vapor phase epitaxy (HVPE). We used two types of rough (100)-oriented GaAs substrates to compare the effect of the initial morphology on the epitaxial growth behavior: an irregular, as-cut surface resultant from cutting the wafer from a GaAs boule and a regularly faceted surface produced by controlled spalling. The DoE analysis identified trends in the overgrowth behavior with changing growth conditions, and we used these trends to design favorable planarization growth conditions for each surface type. These favorable conditions enabled full planarization of a spalled surface with >2.5 um facet height within 10.8 min of growth. The root mean squared (RMS) surface roughness of the resulting (100) surface was 24.5 nm over a 286 um x 215 um area. Our results show that planarization growth by HVPE is a promising technique to enable device growth directly on rough substrates, and the trends revealed through DoE analysis indicate a path toward further optimization of planarization growth conditions for as-cut and spalled surfaces.

14 SOLAR ENERGY↗
DOE OSTI2020

Probing orientation-specific charge-dipole interactions between hexafluoroisopropanol and halides: A joint photoelectron spectroscopy and theoretical study

The interactions between hexafluoroisopropanol (HFIP) and halogen anions X? (F?, Cl?, Br?, and I?) have been investigated by negative ion photoelectron spectroscopy (NIPES) and ab initio calculations. The measured NIPE spectrum of each [HFIP·X]? (X = Cl, Br, and I) complex shows the identical pattern to the corresponding X? by shifting to the high electron binding energy side, indicative of formation of [HFIP···X?] structure, in which X? interacts with HFIP via charge-dipole interactions. However, the spectrum of [HFIP·F]? appears completely different from that of F?, and is more similar to the spectrum of the deprotonated HFIP anion (HFIP?H?). The geometry and electron density calculations indicate that a neutral HF molecule is formed upon HFIP interacting with F? via proton transfer, rendering a stable structure of [HFIP?H···HF]?. Two conformers of [HFIP?H·HF]? with HFIP being in synperiplanar and antiperiplanar configurations, respectively, are observed, providing direct experimental evidences to show the distinctly different and orientation-specific interactions between HFIP and halide anions.

Wang, Lei↗
DOE OSTI2022

Inelastic Neutron Scattering from Thin Film Biaxially Oriented Polyethylene Terephthalate

Recent interest in emerging processes for polymer manufacturing and bio-based chemistries for direct chemical recycling/upcycling has motivated new research focused on a deeper understanding of atomic-scale polymer properties and how they influence macroscopic phenomena. Uncovering the fundamental properties of polymers that give rise to macroscopic behavior could enable new pathways for improved recyclability or utilization of alternative “greener” polymer analogues. In this study, the neutron vibrational spectrum was measured for a film of biaxially oriented polyethylene terephthalate (BoPET) using inelastic neutron scattering (INS), to investigate the relationship between the structure and dynamics of a widely used polymer. Compared to conventional spectroscopic techniques, the use of INS is advantageous for polymeric materials due to the absence of selection rules (i.e., all transitions are allowed), broad-band energy range, and considerable sensitivity to hydrogen modes. In order to distinguish the vibrational modes caused by trans and gauche rotational isomerism, the normal modes of vibration were calculated from a density functional theory-optimized structure of crystalline PET (cPET), representative of the all-trans state, and compared with INS from “highly crystalline” PET powder. Although in- and out-of-plane wagging of hydrogens on the ring structure exhibit significant contribution to both BoPET and cPET spectra, the wagging, rocking, and twisting modes of hydrogen on the ethylene glycol group are, in most cases, conformation-specific. These results were further rationalized by investigating the role of hyperconjugation in stabilizing both conformations using the natural bond order method. Here, through comparison of experimental and calculated INS results, this work provides the fundamental basis for discovering the role of structure and dynamics in shaping the macroscopic properties of PET and polymer analogues.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Molecular Orientation for Vapor-Deposited Organic Glasses Follows Rate-Temperature Superposition: The Case of Posaconazole

The anisotropic properties of organic glasses produced by physical vapor deposition (PVD) depend upon substrate temperature and deposition rate. In recent work, it was shown for a liquid crystalline system that the anisotropic structure of the glass was controlled by a single combined variable as indicated by the observation of deposition rate-substrate temperature superposition (RTS). Here we test the utility of RTS for posaconazole, a molecule that does not form liquid crystals. We prepare glasses of posaconazole utilizing a range of deposition rates covering 2 orders of magnitude and an 18 K range in substrate temperature. We characterize the glasses using ellipsometry and X-ray scattering. Consistent with RTS, we find that decreasing the deposition rate has the same effect upon molecular orientation as increasing the substrate temperature during deposition. Thus, RTS can be used to predict and control the structure of glasses prepared at a wide range of deposition conditions. We use RTS to infer a characteristic time for molecular reorientation at the surface of posaconazole.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Orientational Pair Correlations and Local Structure of Benzonitrile from Molecular Dynamics Simulations with Comparisons to Experiments [plus supplemental information]

Here, we present an experimentally parametrized molecular dynamics study of single-molecule and collective orientational relaxation in neat benzonitrile through the analysis of the reorientational anisotropy and polarizability anisotropy time-correlation function (PA-TCF). The simulations show that the PA-TCF is dominated by collective reorientation after 20 ps. Collective reorientation is found to be slower than single-molecule reorientation by a factor of 1.67, consistent with recent experiments. The simulations provide direct evidence of local antiparallel benzonitrile configurations. These structures, which have been the center of some debate, are responsible for the slower rate of collective vs. single-molecule reorientation in the liquid. Further structural analysis indicates that significant Coulombic interactions between the nitrile group and hydrogen atoms on adjacent molecules play a role in the formation of the antiparallel structures. The single-molecule dynamics reflected in the anisotropy are complex and consist of a ballistic regime, restricted angular diffusion, and spatially anisotropic free diffusion. The principal components of the rotational diffusion tensor are independently obtained and shown to reproduce the free diffusion regime of the anisotropy for each principal axis according to the predictions of a previous theory.

14 SOLAR ENERGY↗
DOE OSTI2021

Controlling the Schottky Barrier at the Pt/TiO 2 Interface by Intercalation of a Self-Assembled Monolayer with Oriented Dipole Moments

Interfacial Schottky barriers can impact the catalytic function of Pt on TiO 2 . Since the electronic structure is characteristic of each material, it may be advantageous to tailor the interfacial Schottky barrier by the addition of adsorbed layers. Here, we show that the Schottky barrier in Pt/TiO 2 can be mitigated by the insertion of self-assembled monolayers (SAM) of carboranethiols that possess an oriented dipole moment. A Pt substrate with the SAM on which TiO 2 nanoparticles are deposited is used to that effect. Kelvin Probe Force Microscopy shows thatm-9-carboranethiolate SAM with perpendicular dipole moments decreases the potential difference between TiO 2 and Pt by ~0.3 eV due to the interfacial electric field of the SAM. Furthermore, our findings open new opportunities for tailoring interfacial electronic structures not only in the metal-semiconductor junction, but also the semiconductor heterojunctions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Revealing the Three-Dimensional Orientation and Interplay between Plasmons and Interband Transitions for Single Gold Bipyramids by Photoluminescence Excitation Pattern Imaging

Gold bipyramids (AuBPs) attract significant attention due to the large enhancement of the electric field around their sharp tips and well-defined tunability of their plasmon resonances. Excitation patterns of single AuBPs are recorded using raster-scanning confocal microscopy combined with radially and azimuthally polarized laser beams. Photoluminescence spectra (PL) and excitation patterns of the same AuBP are acquired with three different excitation wavelengths. Here, the isotropic excitation patterns suggest that the AuBPs are mainly excited by interband transitions with 488/530 nm radiation, while excitation patterns created with a 633 nm laser exhibit a double lobed shape that indicates a single dipole excitation process associated with the longitudinal plasmon resonance mode. We are able to determine the three-dimensional orientation of single AuBPs nonperturbatively by comparing experimental patterns with theoretical simulations. The asymmetric patterns show that the AuBPs are lying on the substrate with an out-of-plane tilt angle of around 10° to 15°.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Discrete Orientations of Interfacial Waters Direct Crystallization of Mica-Binding Proteins

Understanding the basis of templated molecular assembly on a solid surface requires a fundamental comprehension of both short- and long-range aqueous response to the surface under a variety of solution conditions. Herein we provide a detailed picture of how the molecular-scale response to different mica surfaces yields distinct solvent orientations that produce quasi-static directional potentials onto which macromolecules can adsorb. We connect this directionality to observed (a)symmetric epitaxial alignment of designed proteins onto these surfaces, corroborate our findings with 3D atomic force microscopy experiments, and identify slight differences in surface structure as the origin of this effect. Furthermore, our work provides a detailed picture of the intrinsic electrolyte response in the vicinity of mineral interfaces, with clear predictions for experiment, and highlights the role of solvent on the predictive assembly of hierarchical materials on mineral surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Substrate-Dependent Study of Chain Orientation and Order in Alkylphosphonic Acid Self-Assembled Monolayers for ALD Blocking

For years, many efforts in area selective atomic layer deposition (AS-ALD) have focused on trying to achieve high-quality self-assembled monolayers (SAMs), which have been shown by a number of studies to be effective for blocking deposition. In this work, we show that in some cases where a densely packed SAM is not formed, significant ALD inhibition may still be realized. The formation of octadecylphosphonic acid (ODPA) SAMs was evaluated on four metal substrates: Cu, Co, W, and Ru. The molecular orientation, chain packing, and relative surface coverage were evaluated using near-edge X-ray absorption fine structure (NEXAFS), Fourier transform infrared (FTIR) spectroscopy, and electrochemical impedance spectroscopy (EIS). ODPA SAMs formed on Co, Cu, and W showed strong angular dependence of the NEXAFS signal whereas ODPA on Ru did not, suggesting a disordered layer was formed on Ru. Additionally, EIS and FTIR spectroscopy confirmed that Co and Cu form densely packed, “crystal-like” SAMs whereas Ru and W form less dense monolayers, a surprising result since W-ODPA was previously shown to inhibit the ALD of ZnO and Al 2 O 3 best among all the substrates. This work suggests that multiple factors play a role in SAM-based AS-ALD, not just the SAM quality. Therefore, metrological averaging techniques (e.g., WCA and FTIR spectroscopy) commonly used for evaluating SAMs to predict their suitability for ALD inhibition should be supplemented by more atomically sensitive methods. Finally, it highlights important considerations for describing the mechanism of SAM-based selective ALD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Hydrogen Bonding and Its Effect on the Orientational Dynamics of Water Molecules inside Polyelectrolyte Brush-Induced Soft and Active Nanoconfinement

Despite being the most ubiquitous compound on Earth, the fundamental properties of water are not fully understood, especially in nanoconfinement. Densely grafted polyelectrolyte (PE) molecules attain the configuration of a “brush”: these PE brushes, due to their ability to form hydrogen bonds (HBs) with water via the PE functional groups, act as a source of soft and active nanoconfinement for the brush-trapped water molecules. In this paper, we study the effects of PE brush-induced confinement on the structure, dynamics and energetics of the water-water and water-PE HBs. Our results indicate a significant weakening of the HBs from bulk to sparsely grafted to densely grafted brushes. i.e., by increasing the degree of brush-induced nanoconfinement. We explain that this weakening of water-water HBs is caused by the disruption of the extended network of water molecules within the brush-induced nanoconfinement. This is confirmed by performing a ring structure analysis of the water molecules, which yields a reduction in the average ring size at higher degrees of brush-induced nanoconfinement (i.e., at higher brush grafting densities). Furthermore, we investigate the role of HB on the orientational dynamics of the water molecules. Here, we observe that the rotational motion of the water molecules becomes sluggish inside the PE brushes. Recent findings have indicated that the water and counterions trapped in brush-induced nanoconfinement demonstrate structures (in combination with the PE functional group) analogous to that in “water-in-salt” electrolytes that have seen extensive recent uses for Li-ion battery applications. However, the rotational dynamics of water molecules inside the brush-induced nanoconfinement is found to be distinctly different from that of conventional “water-in-salt” electrolytes in absence of any confinement; therefore, the present study will provide the necessary platform towards conceptualizing polymer-based nanoconfinement for battery applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗