Search NASA⌕ Search

SEARCH · Search NASA

Results for “PAST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Determining the slag fraction, water/binder ratio and degree of hydration in hardened cement pastes

A method for determining the original mix composition of hardened slag-blended cement-based materials based on analysis of backscattered electron images combined with loss on ignition measurements is presented. The method does not require comparison to reference standards or prior knowledge of the composition of the binders used. Therefore, it is well-suited for application to real structures. The method is also able to calculate the degrees of reaction of slag and cement. Results obtained from an experimental study involving sixty samples with a wide range of water/binder (w/b) ratios (0.30 to 0.50), slag/binder ratios (0 to 0.6) and curing ages (3 days to 1 year) show that the method is very promising. The mean absolute errors for the estimated slag, water and cement contents (kg/m{sup 3}), w/b and s/b ratios were 9.1%, 1.5%, 2.5%, 4.7% and 8.7%, respectively. 91% of the estimated w/b ratios were within 0.036 of the actual values. -- Highlights: •A new method for estimating w/b ratio and slag content in cement pastes is proposed. •The method is also able to calculate the degrees of reaction of slag and cement. •Reference standards or prior knowledge of the binder composition are not required. •The method was tested on samples with varying w/b ratios and slag content.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Microstructural and bulk property changes in hardened cement paste during the first drying process

This paper reports the microstructural changes and resultant bulk physical property changes in hardened cement paste (hcp) during the first desorption process. The microstructural changes and solid-phase changes were evaluated by water vapor sorption, nitrogen sorption, ultrasonic velocity, and {sup 29}Si and {sup 27}Al nuclear magnetic resonance. Strength, Young's modulus, and drying shrinkage were also examined. The first drying process increased the volume of macropores and decreased the volume of mesopores and interlayer spaces. Furthermore, in the first drying process globule clusters were interconnected. During the first desorption, the strength increased for samples cured at 100% to 90% RH, decreased for 90% to 40% RH, and increased again for 40% to 11% RH. This behavior is explained by both microstructural changes in hcp and C–S–H globule densification. The drying shrinkage strains during rapid drying and slow drying were compared and the effects of the microstructural changes and evaporation were separated.

36 MATERIALS SCIENCE↗

Micro- and nano-X-ray computed-tomography: A step forward in the characterization of the pore network of a leached cement paste

Pore structure of leached cement pastes (w/c = 0.5) was studied for the first time from micro-scale down to the nano-scale by combining micro- and nano-X-ray computed tomography (micro- and nano-CT). This allowed assessing the 3D heterogeneity of the pore network along the cement profile (from the core to the altered layer) of almost the entire range of cement pore size, i.e. from capillary to gel pores. We successfully quantified an increase of porosity in the altered layer at both resolutions. Porosity is increasing from 1.8 to 6.1% and from 18 to 58% at the micro-(voxel = 1.81 μm) and nano-scale (voxel = 63.5 nm) respectively. The combination of both CT allowed to circumvent weaknesses inherent of both investigation scales. In addition the connectivity and the channel size of the pore network were also evaluated to obtain a complete 3D pore network characterization at both scales.

36 MATERIALS SCIENCE↗

Mechanisms of dimensional instability caused by differential drying in wet cured cement paste

This paper examines the mechanisms of wet curing and subsequent drying at 23 °C and 40% RH influencing the curling of cement paste, plate-like beams. Both experimental and model results show that as the duration of the wet curing is increased, the member peak deflection also increases from one sided drying. Experiments suggest that the extended wet curing causes a pore structure refinement resulting in greater saturation and consequently greater shrinkage. A simplified 1-D, drying diffusion and shrinkage model is able to adequately predict experimentally measured peak curling deflections, and confirms the effect of saturation on curling. The results provide important insight into the volume stability of slabs and the potential negative impact of wet curing on slab curling.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Prediction of water vapour sorption isotherms and microstructure of hardened Portland cement pastes

Water vapour sorption isotherms of cementitious materials reflect the multi-scale physical microstructure through its interaction with moisture. Our ability to understand and predict adsorption and desorption behaviour is essential in the application of modern performance-based approaches to durability analysis, along with many other areas of hygro-mechanical and hygro-chemo-mechanical behaviour. In this paper, a new physically based model for predicting water vapour sorption isotherms of arbitrary hardened Portland cement pastes is presented. Established thermodynamic principles, applied to a microstructure model that develops with hydration, provide a rational basis for predictions. Closed-form differentiable equations, along with a rational consideration of hysteresis and scanning phenomena, makes the model suitable for use in numerical moisture simulations. The microstructure model is reconciled with recently published {sup 1}H NMR and mercury intrusion porosimetry results.

36 MATERIALS SCIENCE↗

Parameters controlling early age hydration of cement pastes containing accelerators for sprayed concrete

The objective of this work is to parametrize the early age hydration behavior of accelerated cement pastes based on the chemical properties of cement and accelerators. Eight cements, three alkali-free and one alkaline accelerators were evaluated. Isothermal calorimetry, in situ XRD and SEM imaging were performed to characterize kinetics and mechanisms of hydration and the microstructure development. The reactivity of all accelerators is directly proportional to their aluminum and sulfate concentrations and to the amount and solubility of the setting regulator contained in cement. Alite hydration is enhanced if a proper C{sub 3}A/SO{sub 3} ratio (between 0.67 and 0.90) remains after accelerator addition and if limestone filler is employed, because undersulfated C{sub 3}A reactions are avoided. Combinations of compatible materials are recommended to enhance the performance of the matrix and to prevent an undesirable hydration behavior and its consequences in mechanical strength development.

36 MATERIALS SCIENCE↗

Coupling of chemical kinetics and thermodynamics for simulations of leaching of cement paste in ammonium nitrate solution

A novel numerical method is proposed in this paper to model the leaching of various types of cement pastes in the ammonium nitrate solution by coupling chemical kinetics with chemical thermodynamics. Arrhenius equation and Eyring equation are applied to predict the rate constant of fast dissolution of portlandite in the ammonium nitrate, and a modified rate law is developed by incorporating the saturation ratio of the reaction. The estimations of leached depths from the proposed method comply with the well-known square root-time relationship and they also agree well with the reported experimental results. Moreover, the evolutions of porosity and major hydrate compositions during leaching are obtained. It is found that a simple linear relation exists for the acceleration factor of leaching in 6 M of ammonium nitrate with respect to leaching in pure water regardless of the type of the cement clinker. - Highlights: • Chemical kinetics and thermodynamics are coupled to simulate the accelerated leaching. • The proposed method generates good estimations for leached depths and changes of porosity. • The proposed method can predict the detailed distributions of all the major cement hydrates. • A simple linear relation exists for predicting the widely scattered acceleration factors.

36 MATERIALS SCIENCE↗

Production of H{sub 2} by water radiolysis in cement paste under electron irradiation: A joint experimental and theoretical study

Long-term confinement of nuclear waste is one of the main challenges faced by the nuclear industry. Fission products such as {sup 90}Sr and {sup 137}Cs, both β{sup −} emitters known to induce serious health hazards, represent the largest fraction of nuclear waste. Cement is a good candidate to store them, provided it can resist the effects of irradiation over time. Here, we have investigated the effects of β{sup −} decay on cement by performing electron irradiation experiments on different samples. We show that H{sub 2} production in cement, the main effect of water radiolysis, depends strongly on composition and relative humidity. First-principles calculations indicate that the water-rich interlayer regions with Ca{sup 2+} ions act as electron traps that promote the formation of H{sub 2}. They also show that holes localize in water-rich regions in low Ca content samples and are then able to participate in H{sub 2} production. This work provides new understanding of radiolysis effects in cements. - Graphical abstract: H{sub 2} produced by radiolysis in cement paste is investigated by experimental and computational studies.

36 MATERIALS SCIENCE↗

Characterization of novel blast-furnace slag cement pastes and mortars activated with a reactive mixture of MgO-NaOH

This paper reports results of strength and reaction products of blast-furnace slag cements activated using a mixture of MgO-NaOH with a ratio 50/50 incorporated at 4, 6 and 8% relative to the slag mass. Pastes and mortars were prepared and cured at 20 °C and 60 °C-24 h-20 °C up to 90 days. The results indicated that the combination of MgO-NaOH acts as an effective alkaline activator of the slag, as samples cured at 20 °C developed 54 MPa at 90 days, while those at 60 °C-24 h-20 °C had a rapid strength gain at early ages but in the long run strengths of ~42 MPa at 90 days were observed. The microstructures consisted of (C-(A)-S-H), third aluminate hydrates and hydrotalcite. The formation of the latter increased at higher MgO:NaOH concentration lowering the Al uptake by C-S-H. MgO and Mg(OH){sub 2} were not detected, indicating an effective incorporation of Mg{sup 2+} ions into the atomic structure of the reaction products.

36 MATERIALS SCIENCE↗

Unveiling micro-chemo-mechanical properties of C–(A)–S–H and other phases in blended-cement pastes

Current demand for novel highly sustainable concrete urges improving the links between chemical and mechanical effects of supplementary cementitious materials (SCMs) on the microstructure of blended-cement pastes. In this work, coupled NanoIndentation and Quantitative Energy Dispersion Spectroscopy (NI-QEDS) was applied to disclose chemo-mechanical properties of microstructure phases in systems incorporating typical dosages of fly ash, slag, metakaolin, or glass powder. For a fixed water-to-binder ratio of 0.4, the C–(A)–S–H chemistry was significantly affected by the SCMs, while its average mechanical properties varied within the limited ranges M ≈ 25–27 GPa, H ≈ 0.7–0.8 GPa and C ≈ 180–230 GPa. The SCMs further changed the arrangement of anhydrous phases and minor hydrates embedded in the C–(A)–S–H matrix, which were also characterized (e.g., Portlandite, AFm such as carboaluminates, or an hydrotalcite-like phase). Finally, engineering properties of blended-cement matrices requires tailoring both the intermix of hydrates and the rigid anhydrous SCM inclusions.

36 MATERIALS SCIENCE↗

Sr immobilization in irradiated Portland cement paste exposed to carbonation

Cement based materials are widely used as binding matrices for radionuclides in low and intermediate level waste management applications. We studied the effect of irradiation and carbonation under atmospheric condition on the leaching of Sr from Portland cement paste. Samples were exposed to gamma irradiation or subjected to thermal treatment under either inert or atmospheric conditions. Leaching tests were performed and supplemented by post-leaching characterization including local chemical analysis (LA-ICPMS) crystallographic analysis (XRD), and EPMA imaging. The combination of these methods enabled us to link between the crystallography, texture and composition of the treated samples and their ability to retain Sr ions. Results show that carbonation was the main factor determining the retention of Sr ions, whereas irradiation did not have a significant effect. Moreover, carbonation has a positive effect on the retention of Sr ions in the matrix with the formation of a carbonated zone.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A high-pressure X-ray diffraction study of the crystalline phases in calcium aluminate cement paste

Calcium aluminate cement (CAC) has wide application in civil engineering and castable refractory materials. The main binding phases of hardened CAC paste, CaO·Al{sub 2}O{sub 3}·10H{sub 2}O (CAH{sub 10}), inevitably converts to 2CaO·Al{sub 2}O{sub 3}·8H{sub 2}O (C{sub 2}AH{sub 8}), 3CaO·Al{sub 2}O{sub 3}·6H{sub 2}O (C{sub 3}AH{sub 6}) and Al(OH){sub 3} (AH{sub 3}), leading to a significant change in the mechanical properties of the CAC matrix. This work investigates the mechanical properties of the main crystalline components in hydrated and/or converted CAC systems, using synchrotron-radiation-based high-pressure X-ray diffraction. The anisotropic deformations of CaAl{sub 2}O{sub 4} (CA), CAH{sub 10} and C{sub 3}AH{sub 6} along each crystallographic direction are investigated, along with their bulk moduli. The density-driven stiffening hypothesis is validated for the studied phases and other cement-based minerals. An atom-scale topological analysis is proposed to explain the unusually high stiffness of CAH{sub 10}. The results provide fundamental information to understand the mechanical properties of single cement-based phases at molecular level, and enable predicting the changing mechanical properties of converted CAC matrix using homogenization models.

36 MATERIALS SCIENCE↗

Changes in microstructure characteristics of cement paste on carbonation

This study investigates the influence of carbonation on the microstructure of cement paste cast with Ordinary Portland Cement (OPC), fly ash based Portland Pozzolana Cement (PPC) and Limestone Calcined Clay Cement (LC{sup 3}) using X-ray diffraction (XRD), thermal analysis (TGA), scanning electron microscope (SEM) and mercury intrusion porosimeter (MIP). A comparison is made between samples exposed to 3% carbon dioxide concentration and those exposed to natural CO{sub 2} concentrations. It is observed that the products formed on carbonation are similar in both the exposure conditions. Distinct rims corresponding to decalcified C-S-H are observed around clinker grains in the carbonated samples. Coarsening of pore structure is observed on carbonation in all the cements and an increase in the total porosity is observed in blended cements. Thermodynamic modeling indicates irrespective of the type of cement the total solid volume is reduced on complete carbonation. The volume change occurring on carbonation obtained from experimental results and thermodynamic modeling are compared.

36 MATERIALS SCIENCE↗

Reactive transport modelling of cement paste leaching in brines

We propose and analyse a unified reactive transport model for leaching of cement paste in brines, with and without CO{sub 2}. We investigate the impact of the boundary conditions on the rate of propagation of the reaction. In agreement with experiments, we observe distinct mechanisms as a function of the pH and the CO{sub 2} concentration of the leaching brine. In particular, clogging is observed at intermediate concentration of CO{sub 2} while higher concentration accelerates the reaction. In addition, we leverage the flexibility of the simulator to explore the impact of different models on the simulations. In particular, aqueous species, phase assemblage and diffusion coefficient model are varied. We demonstrate that in order to be able to obtain quantitative predictions, it is important to accurately capture the feedback between chemical reactions, microstructure and macroscopic transport parameters.

36 MATERIALS SCIENCE↗

Impact of an SRA (hexylene glycol) on irreversible drying shrinkage and pore solution properties of cement pastes

Cementitious materials shrink when exposed to decreasing relative humidities, which may result in cracking. Shrinkage reducing admixtures (SRAs) can be used to reduce this drying shrinkage. Although many studies have shown that SRAs reduce the surface tension of the pore solution, the effects of SRAs on other pore solution properties and their relationship to drying shrinkage have been poorly characterized. In this work, we investigate the impact of an SRA (hexylene glycol) on the drying and re-humidification of a cement paste over an extended relative humidity range. The reduction in the first drying shrinkage by the SRA depends on relative humidity. The SRA also significantly reduces the irreversible drying shrinkage. We concluded that the SRA impacts drying shrinkage by acting on the capillary forces, by acting on the specific range of relative humidity over which those forces occur, and potentially by acting on the surface stresses through pore wall adsorption.

36 MATERIALS SCIENCE↗

Early reactivity of sodium silicate-activated slag pastes and its impact on rheological properties

The fast loss of fluidity of sodium silicate-activated slag (SS-AAS) systems have been widely studied in the literature. In this study, the rheology of these cements has been correlated with the evolution of the reaction products formed over time. For this purpose, a combination of experimental characterization techniques, to study the pore solution composition and microstructure of SS-AAS pastes and thermodynamic calculations have been applied. The initial precipitation of ill-defined N-A-S-H and C-N-A-S-H producta leads to a fast increase of the storage modulus after 40 min of reaction. These products are formed from the reaction of the Na{sup +} ions and silicate ions of the activator with the Ca{sup 2+} and aluminate species dissolved from the slag. However, when a shear is applied, the structure breaks down and fluidity is recovered, that infers that the attractive forces between the particles are low at the early stages of hydration.

36 MATERIALS SCIENCE↗

Rheology of fresh cement pastes containing polymer nanoparticles

Influences of polymer nanoparticles (PNPs) with varied charge densities on the rheological behaviors of fresh cement pastes (fcps) without and with polycarboxylate superplasticizer (PCE) were studied. In the blank fcp, the addition of PCE and highly anionically charged PNPs greatly decreases the yield stress and the plastic viscosity due to their large adsorption on cement that produces electrostatic repulsion and steric hindrance between cement grains. However, the non-adsorbing nonionic PNPs show a slightly opposite effect. In the PCE-containing fcp, both the anionic and nonionic PNPs become non-adsorbing on cement due to the stronger affinity of PCE to cement surface. In this way, the addition of the PNPs in the PCE-containing fcp slightly increases the yield stress and the plastic viscosity, but significantly decreases the pseudoplastic index, which is believed to result from the generation of the so-called depletion attractive force between cement grains induced by the non-adsorbing polymers.

36 MATERIALS SCIENCE↗

Multi-scale investigation on mechanical behavior and microstructural alteration of C-S-H in carbonated Alite paste

Carbonation treatment is a promising option to enhance recycled concrete aggregate (RCA) quality and eventually improve concrete performance. This study investigated the multi-scale mechanical properties of calcium silicate hydrates (C-S-H) in a mature alite paste subjected to accelerated carbonation treatment by testing macro compressive strength, microhardness and nanoindentation. The results show that, carbonation treatment resulted in a heterogeneous distribution of carbonation products in the alite sample. Reinforcement of C-S-H by the randomly precipitated calcite and vaterite crystals prevailed over the nano-structural and compositional alteration of C-S-H induced by carbonation, leading to an increase of nano-indentation modulus at the edge of the sample. Also, the microhardness at the edge zone was markedly higher than that at the core of the carbonated sample. The carbonated peripheral zone with improved nano-scale modulus and microhardness was likely serving as a “hard shell”, contributing to the improved macro compressive strength. The new insights into the multi-scale mechanical properties of carbonated C-S-H contribute to further understanding of the enhanced properties of RCA after carbonation treatment.

36 MATERIALS SCIENCE↗