Search NASA⌕ Search

SEARCH · Search NASA

Results for “PITCHING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Handling qualities of a wide-body transport airplane utilizing Pitch Active Control Systems (PACS) for relaxed static stability application

Piloted simulation studies have been conducted to evaluate the effectiveness of two pitch active control systems (PACS) on the flying qualities of a wide-body transport airplane when operating at negative static margins. These two pitch active control systems consisted of a simple 'near-term' PACS and a more complex 'advanced' PACS. Eight different flight conditions, representing the entire flight envelope, were evaluated with emphasis on the cruise flight conditions. These studies were made utilizing the Langley Visual/Motion Simulator (VMS) which has six degrees of freedom. The simulation tests indicated that (1) the flying qualities of the baseline aircraft (PACS off) for the cruise and other high-speed flight conditions were unacceptable at center-of-gravity positions aft of the neutral static stability point; (2) within the linear static stability flight envelope, the near-term PACS provided acceptable flying qualities for static stabilty margins to -3 percent; and (3) with the advanced PACS operative, the flying qualities were demonstrated to be good (satisfactory to very acceptable) for static stabilty margins to -20 percent.

Grantham, William D.↗

Computer programs for calculation of sting pitch and roll angles required to obtain angles of attack and sideslip on wind tunnel models

Two programs have been developed to calculate the pitch and roll angles of a wind-tunnel sting drive system that will position a model at the desired angle of attack and and angle of sideslip in the wind tunnel. These programs account for the effects of sting offset angles, sting bending angles and wind-tunnel stream flow angles. In addition, the second program incorporates inputs from on-board accelerometers that measure model pitch and roll with respect to gravity. The programs are presented in the report and a description of the numerical operation of the programs with a definition of the variables used in the programs is given.

Peterson, John B., Jr.↗

Effects of prolonged weightlessness on self-motion perception and eye movements evoked by roll and pitch

Seven astronauts reported translational self-motion during roll simulation 1-3 h after landing following 5-7 d of orbital flight. Two reported strong translational self-motion perception when they performed pitch head motions during entry and while the orbiter was stationary on the runway. One of two astronauts from whom adequate data were collected exhibited a 132-deg shift in the phase angle between roll stimulation and horizontal eye position 2 h after landing. Neither of two from whom adequate data were collected exhibited increased horizontal eye movement amplitude or disturbance of voluntary pitch or roll body motion immediately postflight. These results are generally consistent with an otolith tilt-translation reinterpretation model and are being applied to the development of apparatus and procedures intended to preadapt astronauts to the sensory rearrangement of weightlessness.

Reschke, Millard F.↗

Pitch angle distributions of low-energy ions in the near-earth magnetosphere

Energetic ion composition data acquired by satellite have been used to study the characteristics of ion pitch angle distributions in the near-earth magnetosphere. Both H(+) and O(+) ions below 1 keV were most frequently observed to have bidirectional field-aligned or conical pitch angle distributions inside L of about 6, with the exception of highly trapped H(+) very near the magnetic equator. The occurrence probability distributions of counterstreaming ions (CSI) and bidirectional conics in magnetic local time and L shell space suggest that the observed CSI were formed near the postmidnight sector and subsequently drifted eastward, and that ions close to the field-aligned direction were probably lost due to charge exchange with atmospheric hydrogen in the course of their eastward drift. In the prenoon sector, conical distributions dominated. Bidirectional ions were vary rarely observed in the afternoon sector, presumably because their drift paths crossed the magnetopause into the dayside magnetosheath.

Sagawa, E.↗

Differential scanning calorimetric survey of brominated PAN, pitch-based and vapor-grown fibers

A differential scanning calorimetric survey of brominated PAN, pitch-based and vapor-grown fibers revealed that only vapor-grown fibers heat-treated to temperatures of 2250 C or above exhibited the phase change at 100 C associated with the two-dimensional melting of bromine, similar to that observed in HOPG. All the pitch-based fibers tested, as well as vapor-grown fibers annealed to 2250 C, showed a substantial decrease in resistivity upon bromination but gave no indication of a phase change, suggesting that the bromine in these fibers does not have the long-range order needed to undergo two-dimensional melting. The brominated PAN fibers and unannealed vapor-grown fibers showed no phase change and no change in resistivity, indicating that these fibers do not intercalate bromine.

Jaworske, D. A.↗

An airfoil pitch apparatus-modeling and control design

The study of dynamic stall of rapidly pitching airfoils is being conducted at NASA Ames Research Center. Understanding this physical phenomenon will aid in improving the maneuverability of fighter aircraft as well as civilian aircraft. A wind tunnel device which can linearly pitch and control an airfoil with rapid dynamic response is needed for such tests. To develop a mechanism capable of high accelerations, an accurate model and control system is created. The model contains mathematical representations of the mechanical system, including mass, spring, and damping characteristics for each structural element, as well as coulomb friction and servovalve saturation. Electrical components, both digital and analog, linear and nonlinear, are simulated. The implementation of such a high-performance system requires detailed control design as well as state-of-the-art components. This paper describes the system model, states the system requirements, and presents results of its theoretical performance which maximizes the structural and hydraulic aspects of this system.

Andrews, Daniel R.↗

Cosmic-ray pitch-angle scattering in isotropic turbulence

A dissipation range is incorporated in the turbulence model to reconcile the divergent conclusions from studies of cosmic-ray pitch-angle scattering in isotropic magnetic turbulence. The Fokker-Planck coefficient for pitch-angle scattering is calculated. It is shown that the slab form of the Fokker-Plank coefficient (Jokipii, 1966) is valid at very low energies, while the nonslab form (Fisk, 1974) is valid at intermediate energies.

Bieber, John W.↗

Unsteady aerodynamic characteristics of a fighter model undergoing large-amplitude pitching motions at high angles of attack

The effects of harmonic or constant-rate-ramp pitching motions (giving angles of attack from 0 to 75 deg) on the aerodynamic performance of a fighter-aircraft model with highly swept leading-edge extensions are investigated experimentally in the NASA Langley 12-ft low-speed wind tunnel. The model configuration and experimental setup are described, and the results of force and moment measurements and flow visualizations are presented graphically and discussed in detail. Large force overshoots and hysteresis are observed and attributed to lags in vortical-flow development and breakup. The motion variables have a strong influence on the persistence of dynamic effects, which are found to affect pitch-rate capability more than flight-path turning performance.

Brandon, Jay M.↗

Design and development of a facility for compressible dynamic stall studies of a rapidly pitching airfoil

A facility for the study of dynamic stall of an airfoil undergoing a transient ramp-type pitching motion is described. The facility can produce pitch rates of 3600 deg/sec to an angle of attack of 60 deg by using a specially designed hydraulic drive with feedback control. The ramp motion generator can also generate arbitrary motion of the airfoil and thus can simulate an arbitrary aircraft maneuver. A unique airfoil support system allows unobstructed flow visualization including the complete airfoil contour, thus permitting the use of nonintrusive optical diagnostic methods for flow measurement close to the surface as well as simultaneous far-field measurements. Schlieren pictures obtained during the study reveal the instantaneous density gradients associated with dynamic stall, even under conditions of very low Mach numbers.

Chandrasekhara, M. S.↗

Conversion of omnidirectional proton fluxes into a pitch angle distribution

The long-term radiation exposures anticipated for astronauts aboard oriented space stations entail consideration of spacecraft mass distribution and the direction of high-energy proton flux. A scheme has been developed for deriving pitch-angle distributions of energetic protons from the omnidirectional fluxes contained in the AP-8 MIN magnetospheric radiation model. A functional form is also presented for expressing the proton pitch-angle distributions at a given energy and L coordinate, as a function of only three parameters.

Badhwar, Gautam D.↗

Analyzing the flared landing task with pitch-rate flight control systems

A closed-loop handling qualities methodology is applied to an analysis of the flared landing task with pitch-rate flight control systems. A model of pilot behavior throughout approach and flare is developed which postulates the manner in which the pilot may move from pitch attitude to flight path angle control. Twenty-five configurations flight tested on the NC-131H Total In-flight Simulator aircraft are analyzed using a structural pilot model ad a handling qualities methodology previously reported in the literature. Closed-loop simulation of the simplified landing task is undertaken using the structural model. The pilot ratings from flight test extended the data base supporting the utility of a model-based handling qualities metric. A handling qualities sensitivity function is introduced which may have potential as a design tool.

Hess, Ronald A.↗

Digital Pitch-And-Roll Monitor

Highly accurate inclinometer developed. Monitors both pitch and roll simultaneously and provides printed output on demand. Includes three mutually perpendicular accelerometers and signal-conditioning circuitry converting outputs of sensors to digital values of pitch and roll. In addition to wind-tunnel applications, system useful in any application involving steady-state, precise sensing of angles, such as calibration of robotic devices and positioners.

Finley, Tom D.↗

An airfoil pitch apparatus-modeling and control design

The study of dynamic stall of rapidly pitching airfoils is being conducted at NASA Ames Research Center. Understanding this physical phenomenon will aid in improving the maneuverability of fighter aircraft as well as civilian aircraft. A wind tunnel device which can linearly pitch and control an airfoil with rapid dynamic reponse is needed for such tests. To develop a mechanism capable of high accelerations, an accurate model and control system is created. The model contains mathematical representations of the mechanical system, including mass, spring, and damping characteristics for each structural element, as well as coulomb friction and servovalve saturation. Electrical components, both digital and analog, linear and nonlinear, are simulated. The implementation of such a high-performance system requires detailed control design as well as state-of-the-art components. This paper describes the system model, states the system requirements, and presents results of its theoretical performance which maximizes the structural and hydraulic aspects of this system.

Andrews, Daniel R.↗

A digital pitch and roll monitor

A digital pitch and roll monitor was developed that will provide an easy measurement of angle in two axes simultaneously to an accuracy of approximately 0.005 degree. This system provides advantages over any other commercially available angle-measuring device in that an inexperienced operator can obtain quick reliable measurements. The system utilizes three mutually perpendicular accelerometers, mounted on an inclinometer base, and the intelligent signal conditioning equipment needed to convert the output of these sensors to pitch and roll. The two-axis inclinometer consists of three mutually perpendicular accelerometers mounted on an inclinometer base, three digital multimeters to provide power to the accelerometers and digitize their output, a computer to calculate the angles, and a printer to provide hardcopy output.

Finley, Tom↗

High-speed pitch angle sorter

A high-speed method was developed to compress the two-dimensional angular distribution of space particles gathered by space plasma instrumentation into the angle distribution, where the pitch angle is polar angle with respect to the ambient magnetic field. The pitch angle sorter can handle rates of up to 2 MHz and it is designed to accommodate high angular resolution plasma analyzers that are placed on a rotating spacecraft. This compression is achieved by relying on digitally encoded lookup tables to eliminate all arithmetic operations while applying the high symmetry of this compression to reduce the amount of digital memory.

Keller, John W.↗

Rocket measurements of relativistic electrons - New features in fluxes, spectra and pitch angle distributions

Novel features are presented of precipitating relativistic electron fluxes measured on a spinning sounding rocket payload at midday between altitudes of 70 and 130 km in the auroral region. The sounding rocket was launched during a relativistic electron enhancement event of modest intensity. Electron fluxes were measured for a total of about 210 seconds at energies from 0.1 to 3.8 MeV, while pitch angle was sampled from 0 to 90 deg every spin cycle. Electrons with energies below about 0.2 MeV showed isotropic pitch angle distributions during most of the first 90 sec of data, while at higher energies the electrons had the highest fluxes near the mirroring angle (90 deg); when they occurred, the noted downward bursts were seen at all energies. The low-altitude fluxes are compared with those measured at geostationary orbit, and it is found that the low-altitude fluxes are much higher than expected from a simple mapping of a pancake distribution at high altitudes.

Herrero, F. A.↗

An experimental study of the sensitivity of helicopter rotor blade tracking to root pitch adjustment in hover

The sensitivity of blade tracking in hover to variations in root pitch was examined for two rotor configurations. Tests were conducted using a four bladed articulated rotor mounted on the NASA-Army aeroelastic rotor experimental system (ARES). Two rotor configurations were tested: one consisting of a blade set with flexible fiberglass spars and one with stiffer (by a factor of five in flapwise and torsional stiffnesses) aluminum spars. Both blade sets were identical in planform and airfoil distribution and were untwisted. The two configurations were ballasted to the same Lock number so that a direct comparison of the tracking sensitivity to a gross change in blade stiffness could be made. Experimental results show no large differences between the two sets of blades in the sensitivity of the blade tracking to root pitch adjustments. However, a measurable reduction in intrack coning of the fiberglass spar blades with respect to the aluminum blades is noted at higher rotor thrust conditions.

Wilkie, W. Keats↗

Invacuo tribological evaluation of coarse-pitch gears for use on the Space Station alpha joint

Existing invacuo or ambient test data of slow-speed (less than 30 meters/minute pitch line velocity), coarse-pitch gears could not be found suitable for use in evaluating gear materials and surface treatments for the gear-driven bearing race of the Solar Alpha Rotary Joint (SARJ) for Space Station Freedom (SSF). Gear testing was conducted by AEC-Able Engineering Company, Inc. to obtain design data for this critical SSF component. Some bull gear/pinion/lubrication combinations endured over 600,000 cycles (100 SSF years) without measurable wear, while other combinations experienced surface treatment degradation after only 40,000 cycles (seven SSF years). No catastrophic failures, such as seizing or tooth breakage, occurred during any test, all of which were run at least 201,000 cycles (34.5 SSF years). Specific results such as debris characteristics, mechanical efficiencies, effectiveness and degradation of lubrication, and wear data for the various gear combinations tested are described.

Allen, Scotty R.↗