Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA POTENTIAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

3D tracking of particles in a dusty plasma by laser sheet tomography

The collective behavior of levitated particles in a weakly ionized plasma (dusty plasma) has raised significant scientific interest. This is due to the complex array of forces acting on the particles and their potential to act as in situ diagnostics of the plasma environment. Ideally, the three-dimensional (3D) motion of many particles should be tracked for long periods of time. Typically, stereoscopic imaging using multiple cameras combined with particle image velocimetry is used to obtain a velocity field of many particles, yet this method is limited by its sample volume and short time scales. Here, we demonstrate a different, high-speed tomographic imaging method capable of tracking individual particles. We use a scanning laser sheet coupled to a single high-speed camera. We are able to identify and track tens of individual particles over centimeter length scales for several minutes, corresponding to more than 10 000 frames.

Physics↗
DOE OSTI2024

Statistical analysis of magnetic divertor configuration influence on H-mode transitions

DIII-D plasmas are compared for two upper divertor configurations: with the outer strike point on the small angle slot (SAS) divertor target and with the outer strike point on the horizontal divertor target (HT). Scanning the vertical distance between the magnetic null point and the divertor target over a range 0.10–0.16 m is shown to increase the threshold power, $P_\mathrm{th}$, and edge plasma power, $P_\mathrm{Loss},$ for the low-to-high confinement (L–H) and H–L transitions respectively, by up to a factor of 1.4. The X-point height scans were performed at three L-mode core plasma line average electron densities, $\bar{n}_\mathrm{e} = $ 1.2, 2.2 and 3.6 $\times 10^{19}\,\mathrm{m}^{-3}$, to investigate the density dependence of divertor magnetic configuration influence on $P_\mathrm{th}$. The X-point height, $Z_\textrm{x-pt}$, was further extended across the range 0.16–0.22 m with the more open HT divertor configuration, for which a clear decrease in $P_\mathrm{th}$ with increasing $Z_\textrm{x-pt}$ is observed. The dependence of $P_\textrm{th}$ on divertor magnetic geometry is further investigated using a time-dependent probability density function (PDF) model and information geometry to elucidate the roles played by pedestal plasma turbulence and perpendicular velocity flows. The degree of stochasticity of the plasma turbulence is observed to be sensitive to the plasma heating rate. The calculated square of the information rate shows changes in the relative density fluctuations and perpendicular velocity PDFs begin 2–5 ms prior to the L–H transition for three plasmas; providing a crucial measurement of the dynamic timescale of external transport barrier formation. Additionally, both information length and rate provide potential predictors of the L–H transition for these plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Toward constraint of ionization-potential depression models in a convergent geometry

We demonstrate the value of inner-shell x-ray absorption spectroscopy for dense-plasma atomic physics and explore the coupling between constraint of the thermodynamic state and constraint of ionization-potential depression models. Synthetic K-shell absorption spectra are generated along a radius from a point-like core and analyzed using different ionization-potential depression models. Within this synthetic analysis framework, we identify plasma conditions (T e = 400 eV, ρ = 40g/cm 3 ) accessible by spherical implosions where K-shell absorption spectra discriminate between models if the material temperature is measured to a precision of 20%. The analysis is extensible to a finite-sized core and can be used to guide future studies of ionization-potential depression, informing material and radiative properties of matter in fusion plasmas and stellar interiors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Flowing plasma rearrangement in the presence of static perturbing fields

Charged particles interacting with electromagnetic waves have a portion of their energy tied up in wave-driven oscillations. When these waves are localized to the exhaust of linear magnetic confinement systems, this ponderomotive effect can be utilized to enhance particle confinement. The same effect can be derived for particles moving via an E×B drift into a region of a static perturbation to the electromagnetic fields which has a large wave vector component in the direction of the motion. In this work, we use a simplified slab model to self-consistently solve for the electromagnetic fields within the fluid flowing plasma of a static flute-like (k∥=0) perturbation and evaluate the resulting ponderomotive potential. We find that two types of perturbations can exist within the flowing plasma, which are an O wave and an X wave in the frame moving with the fluid. In the case of tenuous plasma, these perturbations are magnetostatic or electrostatic multipole-analog perpendicular to the guiding magnetic field in the lab frame, respectfully. For denser plasmas, the O wave-like perturbation is screened at the electron skin depth scale, and the X wave-like perturbation is a combination of a similar perpendicular electric perturbation and parallel magnetic perturbation. The ponderomotive potential generated in the X wave-like case is gyrofrequency-dependent and can be used as either potential barriers or potential wells, depending on the direction of the flow velocity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Artificial intelligence-based predictive modeling for imaging neutral particle analyzers on the DIII-D tokamak

The Imaging Neutral Particle Analyzer (INPA) at DIII-D is a diagnostic system used to accurately resolve the energy and spatial distributions of fast ions in fusion plasmas. A novel artificial intelligence (AI) technique named INPA-net is based on Reservoir Computing Networks and developed here to predict active and passive signals produced by charge-exchange reactions from injected and edge-cold neutrals, respectively, in magnetically confined fusion plasmas. This model is trained using a set of 21 time domain signals between 0 s to 3.35 s that includes injected beam and thermal plasma information, and 6444 real 2D experimental images of the INPA in 12 plasma discharges at DIII-D. The trained neural network is able to forecast experimental images in real-time. The model achieves an R-squared value of 0.91, which is higher than the 0.83 value achieved by a simple linear regression model. This improvement highlights the model's enhanced predictive accuracy for measured images from the validation set. This AI approach is valuable due to its rapid response times and potential for integration into real-time plasma control systems. A version of this model capable of generating syntehic images would be useful for the real-time monitoring of fast-ion transport. A comprehensive sensitivity study reveals that INPA-net maintains high performance even with variations in the input parameters, indicating the model's robustness and reliability. While developed for the INPA, the underlying architecture is adaptable and may be applied to various 2D imaging diagnostics in fusion research.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Data-driven model for divertor plasma detachment prediction

We present a fast and accurate data-driven surrogate model for divertor plasma detachment prediction leveraging the latent feature space concept in machine learning research. Our approach involves constructing and training two neural networks: an autoencoder that finds a proper latent space representation (LSR) of plasma state by compressing the multi-modal diagnostic measurements and a forward model using multi-layer perception (MLP) that projects a set of plasma control parameters to its corresponding LSR. By combining the forward model and the decoder network from autoencoder, this new data-driven surrogate model is able to predict a consistent set of diagnostic measurements based on a few plasma control parameters. In order to ensure that the crucial detachment physics is correctly captured, highly efficient 1D UEDGE model is used to generate training and validation data in this study. The benchmark between the data-driven surrogate model and UEDGE simulations shows that our surrogate model is capable of providing accurate detachment prediction (usually within a few per cent relative error margin) but with at least four orders of magnitude speed-up, indicating that performance-wise, it has the potential to facilitate integrated tokamak design and plasma control. Comparing with the widely used two-point model and/or two-point model formatting, the new data-driven model features additional detachment front prediction and can be easily extended to incorporate richer physics. This study demonstrates that the complicated divertor and scrape-off-layer plasma state has a low-dimensional representation in latent space. Understanding plasma dynamics in latent space and utilising this knowledge could open a new path for plasma control in magnetic fusion energy research.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Developing solid-surface plasma facing components for pilot plants and reactors with replenishable wall claddings and continuous surface conditioning. Part A: concepts and questions

Abstract It is estimated that pilot plants and reactors may experience rates of net erosion and deposition of solid plasma facing component (PFC) material of 10 3 –10 5 kg yr −1 . Even if the net erosion (wear) problem can be solved, the redeposition of so much material has the potential for major interference with operation, including disruptions due to so-called ‘unidentified flying objects (UFOs)’ and unsafe dust levels. The potential implications appear to be no less serious than for plasma contact with the divertor target: a dust explosion or a major UFO-disruption could be as damaging for an actively-cooled deuterium-tritium (DT) tokamak as target failure. It will therefore be necessary to manage material deposits to prevent their fouling operation. This situation appears to require a fundamental paradigm shift with regard to meeting the challenge of taming the plasma–material interface: it appears that any acceptable solid PFC material will in effect be flow-through , like liquid–metal PFCs, although at far lower mass flow rates. Solid PFC material will have to be treated as a consumable , like brake pads in cars. ITER will use high-Z (tungsten) armor on the divertor targets and low-Z (beryllium) on the main walls. The ARIES-AT reactor design calls for a similar arrangement, but with SiC cladding on the main walls. Non-metallic low-Z refractory materials such as ceramics (graphite, SiC, etc) used as in situ replenishable, relatively thin—of order mm—claddings on a substrate which is resistant to neutron damage could provide a potential solution for the main walls, while reducing the risk of degrading the confined plasma. Separately, wall conditioning has proven essential for achieving high performance. For DT devices, however, standard methods appear to be unworkable, but recently powder droppers injecting low-Z material ∼continuously into discharges have been quite effective and may be usable in DT devices as well. The resulting massive generation of low-Z debris, however, has the same potential to seriously disrupt operation as noted above. Powder droppers provide a unique opportunity to carry out controlled studies on the management of low-Z slag in all current tokamaks, independent of whether their protection tiles use low-Z or high-Z material.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Transient Relativistic Plasma Grating to Tailor High-Power Laser Fields, Wakefield Plasma Waves, and Electron Injection

In this work, we show the first experiment of a transverse laser interference for electron injection into the laser plasma accelerators. Simulations show such an injection is different from previous methods, as electrons are trapped into later acceleration buckets other than the leading ones. With optimal plasma tapering, the dephasing limit of such unprecedented electron beams could be potentially increased by an order of magnitude. In simulations, the interference drives a relativistic plasma grating, which triggers the splitting of relativistic-intensity laser pulses and wakefield. Consequently, spatially dual electron beams are accelerated, as also confirmed by the experiment.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Neutralization of ion beam by electron injection: Accumulation of cold electrons

Ion beam charge neutralization by electron injection is a complex kinetic process. Recent experiments show that the resulting self-potential of the ion beam after neutralization by plasma is much lower than the temperature of plasma electrons [Stepanov et al., Phys. Plasmas 23, 043113 (2016)], indicating that kinetic effects are important and may affect the neutralization of the ion beam. We performed a numerical study of the charge neutralization process of an ion beam making use of a two-dimensional electrostatic particle-in-cell code. The results show that the process of charge neutralization by electron injection is composed of two stages. During the first stage, the self-potential of the beam is higher than the temperature of injected electrons (T e /e) and all injected electrons are captured by the ion beam. During the second stage, hot electrons escape from the ion beam and the beam self-potential (φ) decreases because cold electrons slowly accumulate resulting in the beam self-potential φ to become much lower than Te/e in agreement with previous experimental observations at Princeton Advanced Teststand. We also determined that the resulting φ scales as φ~√T e , in agreement with previous experimental observations from Gabovich's group. In addition, the results show that the transverse position of the electron source has a great impact on ion beam neutralization. A slight shift of the electron source as relevant to the ion thrusters leads to a large increase in the beam self-potential because of an increase in potential energy of injected electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Interpenetration and kinetic effects in converging, high-energy plasma jets

In this work, we report on numerical simulations of laser-driven convergent plasma fusion targets. These “inverted corona” fusion targets are useful for the study of counter-streaming and converging rarefied plasma flows, and previous experiments have demonstrated their potential as neutron sources. The scheme consists of a fuel layer lined along the interior surface of a hollow plastic shell that is laser-ablated and expands inward towards the target center. The plasma streams generated in these targets are initially nearly collisionless as they converge, leading to wide interaction length scales and long interaction time scales as the jets interpenetrate. Such kinetic effects impact mixing of constituent ions - a phenomenon not properly captured by single-fluid hydrodynamic simulations. Here we conduct numerical simulations using two different methods: (1) single-fluid simulations in HYDRA, and (2) kinetic-ion, fluid-electron hybrid particle-in-cell (PIC) simulations in the code Chicago. It is shown that the initially nearly collisionless plasma fronts interpenetrate deeply and lead to broader interaction regions in space and time resulting in significant beam-beam fusion. The two approaches make different, testable predictions for the effect of fuel-layer thickness on neutron yield.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Application of the portable diagnostic package to the Wisconsin high-temperature-superconducting axisymmetric mirror (WHAM)

We present an application of the Portable Diagnostic Package (PDP) on the Wisconsin High-temperature-superconducting Axisymmetric Mirror (WHAM), which integrates an optical emission spectroscopy (OES) system and an active Thomson scattering (TS) system. The OES system facilitates a comprehensive impurity line survey and enables flow measurements through the Doppler effect observed on impurity lines. Plasma rotation profiles were successfully derived from doubly charged carbon lines. The TS system enabled the first measurements of the electron temperature in commissioning plasmas on WHAM. Notably, the PDP was installed, commissioned, and used to obtain OES and TS data within ∼6 months from project start, enabled by its designed portability and standardized interfaces. These results demonstrate the PDP’s potential to accelerate diagnostic readiness and advance experimental plasma studies.

Doppler effect↗
DOE OSTI2025

Cooper minima of atoms in a plasma environment

Recent efforts have extended the calculations of photon ionization and associated Cooper minima to atoms in a plasma environment simulated by screening the atomic potential. Furthermore, in this paper previously unrecognized features of bound electron photon excitations in screened atomic potentials are examined. First, the Cooper minima location as a function of photon energy is shown to be weakly dependent on the screening, which is explained by stationary perturbation theory. Second, the screening transfers transition probability from high to low photon energies relative to the isolated atom result.

Cooper minima↗
DOE OSTI2022

Conceptual design of a heavy ion beam probe diagnostic for the Wendelstein 7-X Stellarator

This article describes the current state of the design of the heavy ion beam probe (HIBP) for Wendelstein 7-X (W7-X). It will be the first HIBP diagnostic on an optimized stellarator and is designed to study electric fields and ion scale turbulence in all W7-X reference magnetic configurations. The use of an existing 2 MV accelerator, located outside of the torus hall, results in the need for a circuitous primary beamline. This increases the complexity of the ion optics design to deliver a focused beam to the plasma. To access most of the magnetic configuration space of W7-X, the secondary beamline and an energy analyzer are designed to pivot, thereby redirecting a wider range of secondary beam trajectories. Signal level estimates indicate that the equilibrium potential can be measured at all radii and that the radial coverage for potential and density fluctuations measurements depends on the plasma density.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Collaborative Research: Vlasov-Maxwell Simulations to Resolve Electron Heating and Dissipation, in Quasi-Perpendicular Shocks (Final Report)

Collisionless shocks are a grand challenge problem in plasma physics and have been the subject of study for more than six decades. Shocks are ubiquitous phenomena in the universe and are responsible for transforming high energy and momentum flows into thermal energy and energetic particles. Understanding how shocks operate is of primary importance to understand the sun-earth coupling, protecting manned missions and spacecrafts from high energy particles, inertial confinement fusion, and radiation observed from astrophysical plasmas, such as supernova remnants and astrophysical jets. A major unanswered question on this frontier is, how does a collisionless plasma transform flow energy and momentum into electron thermal energy? Many potential mechanisms have been proposed to perform the conversion between flow and thermal energy in a collisionless plasma, but the answer has been elusive. To solve the mystery, non-relativistic perpendicular and quasi-perpendicular shocks are studied via a coordinated approach employing cutting-edge numerical simulations with the continuum kinetic code Gkeyll and spacecraft observations supplied by NASA's Magnetospheric Multiscale (MMS) mission. In both sets of data, we employ novel techniques to identify how and where energy is exchanged between electromagnetic fields and plasma particles. By combining cutting-edge spacecraft data and numerical simulations with these diagnostics, we have been able to identify some of the primary mechanisms responsible electron heating and dissipation in heliospheric shocks. In addition to electron dynamics, we have complete access to proton simulation and in situ data, enabling us to characterize proton heating and acceleration in quasi-perpendicular shocks. Many astrophysical quasi-perpendicular shocks have similar parameters to those in this study, including supernova remnants and shocks in galaxy clusters. Additionally, the simulation code, Gkeyll, and associated analysis scripts are openly available for community use. This award has supported a collaborative effort between Princeton University, the University of Arizona - Tucson, and the University of Maryland - College Park. The award funded three early career scientists, including the funding and training of one female postdoctoral researcher, who was involved in all aspects of the MMS data analysis and some portions of the simulation analysis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Understanding the cold plasma synthesis of ammonia with model metal catalysts through plasma diagnostics (Final Report)

The industrial synthesis of ammonia, which amounts to over 200 million tons annually, is the most energy-intensive chemical process. Therefore, there is a critical need and increased interest in exploring less energetic routes to produce ammonia. Not only does ammonia have a direct impact on the food market, but also it has the potential as a fuel and hydrogen carrier. Recently, plasma catalysis has emerged as a promising alternative for synthesizing ammonia at mild (pressure, temperature and power) conditions. The key to this catalytic process is the synergy between the plasma and the catalyst, where the non-equilibrium plasma allows the generation of excited species, which recombine at the catalyst surface to form ammonia. However, our current understanding of this process is in its infancy. In this respect, model metals are ideal candidates for gaining a basic understanding of this reaction. Moreover, a major roadblock to rationally designing novel effective catalysts for plasma-assisted ammonia production is the need for fundamental aspects of this process. Through a comprehensive plan that integrates model metals as catalysts and world-class diagnostics, the proposed work aims to provide fundamental knowledge about the nature of reactive processes occurring during plasma-assisted catalysis and to demonstrate the selective production of ammonia, catalyzed by employing selected metals under non-thermal plasma conditions. Toward this goal, the central thrust of this proposal was to demonstrate that the synergy between plasma and rationally selected model metals will boost ammonia yields during plasma-assisted ammonia synthesis by delaying hydrogen recombination. Specifically, we aimed to (1) understand the formation and role of gas-phase active species such as NH, N 2 , N 2 + and Ha during the plasma-enhanced synthesis of ammonia through OES and FTIRAS using different reaction configurations: a) only plasma (non-packed DBD reactor) and b) packed DBD reactor with metal nanoparticles. This proposal was awarded/recommended with a run time on the PCRF facility FY20.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Siegert-pseudostate formulation with B-splines

Siegert states (SSs) serve as a useful basis for studying quantum scattering from finite-range potentials. Since they form a discrete instead of continuous set of eigen-solutions, SSs are convenient for performing electronic structure calculations in atoms, molecules, and plasmas. Numerical instabilities may arise, however, in the computation of SSs if the potential vanishes for some extended region, a situation commonly occurring in plasma calculations. Here, in this paper, we identify the cause of these instabilities as the use of non-localized radial basis functions. We thus advocate the use of localized radial basis functions, in particular B-splines, for more robust computations of SSs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Spot size measurement of a deuterium–tritium dense plasma focus using neutron radiography

Neutron radiography is a technique uniquely suited to applications in nuclear diagnostics, non-destructive testing, and subcritical experiments. The spatial resolution of neutron radiographs is degraded by optical blur in the imaging system and the neutron source size, where the ideal source is point-like to optimize the point-spread function. A potential neutron source for radiography is the dense plasma focus (DPF), a coaxial Z-pinch that produces thermonuclear and beam-target neutrons. To assess if the source size is suitable for radiography, a neutron imaging system was used to measure the source size of the 4 MA Sodium DPF at the Nevada National Security Site operating with deuterium–tritium gas-fill. The source size was measured using the edge-spread function of tungsten objects, each having a rolled (convex) edge. The spot size was found to be 7–12 mm full-width at half-max (FWHM) assuming a Gaussian source, though comparison is presented for Lorentzian and Bennett distributions. The average FWHM was found to be 8.6 ± 1.2 mm vertically and 10.8 ± 1.2 mm horizontally with respect to the image plane, averaging over varied edges and alignments. The results were sensitive to source alignment and edge metrology, which introduced notable uncertainties. These results are consistent with separate experimental measurements as well as magnetohydrodynamics simulations of this DPF, which suggest that neutron production can originate from pinches ∼5–7 mm off-axis. These results suggest that the DPF should be used for radiography at low magnification (M < 1) where spot size does not dominate spatial blur.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Decarbonization of the Chemical Industry Through Electrification: Barriers and Opportunities

The chemical industry is a major source of economic productivity and employment globally and among the top 3 industrial sources of greenhouse gas (GHG) emissions, along with steel and cement. As global demand for chemical products continues to grow, there is an urgency to develop and deploy sustainable chemical production pathways and to reconsider continued investment in current emission-intensive production technologies. This perspective describes the challenges and opportunities to decarbonize the chemical industry via electrification powered by low-carbon electricity supply, both in the near term and long term, and it discusses four technological pathways ranging from the more mature direct substitution of heat with electricity and use of hydrogen to technologically less mature, yet potentially more selective, approaches based on electrochemistry and plasma. Finally, we highlight the key elements of integrating an electrified industrial process with the power sector to leverage process flexibility to reduce energy costs of chemical production and provide valuable power grid support services. Unlocking such plant-to-grid coordination and the four electrification pathways has significant potential to facilitate rapid and deep decarbonization of the chemical industry sector.

chemical synthesis↗